Home > Motorola > Wireless > Motorola Wing 5 Manual

Motorola Wing 5 Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Motorola Wing 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1128
    Add page 821 to Favourites
    image text
    Enable zoom 
    							DHCP-SERVER-POLICY 13 - 37
13.1.3.3 static-binding
dhcp-pool-mode
Configures static IP address information for a particular device. Static address binding is executed on the device’s 
hostname, client identifier, or MAC address. Static bindings allow the configuration of client parameters, such as DHCP 
server, DNS server, default routers, fixed IP address etc.
Table 13.5static-binding commands
Command Description Reference
static-bindingConfigures a static binding policypage 13-38
    Add page 822 to Favourites
    image text
    Enable zoom 
    							13 - 38 WiNG CLI Reference Guide
13.1.3.3.1 static-binding
static-binding
Configures static address bindings
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
static-binding [client-identifier |hardware-address ]
Parameters
• static-binding [client-identifier |hardware-address ]
client-identifier  Enables static binding configuration for a client based on its client identifier as 
provided by DHCP option 61 and its key value
  – Set the client identifier specified with DHCP option 61.
hardware-address  Enables static binding configuration for a client based on its MAC address
  – Specify the client’s MAC address.
    Add page 823 to Favourites
    image text
    Enable zoom 
    							DHCP-SERVER-POLICY 13 - 39
Examples
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#static-binding client-identifier 
test
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#?
DHCP static binding Mode commands:
  bootfile             Boot file name
  client-name          Client name
  default-router       Default routers
  dns-server           DNS Servers
  domain-name          Configure domain-name
  ip-address           Fixed IP address for host
  netbios-name-server  NetBIOS (WINS) name servers
  netbios-node-type    NetBIOS node type
  next-server          Next server in boot process
  no                   Negate a command or set its defaults
  option               Raw DHCP options
  respond-via-unicast  Send DHCP offer and DHCP Ack as unicast messages
  static-route         Add static routes to be installed on dhcp clients
  clrscr               Clears the display screen
  commit               Commit all changes made in this session
  do                   Run commands from Exec mode
  end                  End current mode and change to EXEC mode
  exit                 End current mode and down to previous mode
  help                 Description of the interactive help system
  revert               Revert changes
  service              Service Commands
  show                 Show running system information
  write                Write running configuration to memory or terminal
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-Hex)#
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-11-22-33-44-55-66)#?
DHCP static binding Mode commands:
  bootfile             Boot file name
  client-name          Client name
  default-router       Default routers
  dns-server           DNS Servers
  domain-name          Configure domain-name
  ip-address           Fixed IP address for host
  netbios-name-server  NetBIOS (WINS) name servers
  netbios-node-type    NetBIOS node type
  next-server          Next server in boot process
  no                   Negate a command or set its defaults
  option               Raw DHCP options
  respond-via-unicast  Send DHCP offer and DHCP Ack as unicast messages
  static-route         Add static routes to be installed on dhcp clients
  clrscr               Clears the display screen
  commit               Commit all changes made in this session
  do                   Run commands from Exec mode
  end                  End current mode and change to EXEC mode
  exit                 End current mode and down to previous mode
  help                 Description of the interactive help system
  revert               Revert changes
  service              Service Commands
  show                 Show running system information
  write                Write running configuration to memory or terminal
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-11-22-33-44-55-66)#
Related Commands
noResets values or disables the DHCP policy DHCP pool commands
    Add page 824 to Favourites
    image text
    Enable zoom 
    							13 - 40 WiNG CLI Reference Guide
13.1.3.3.2 static-binding-mode
Table 13.6 summarizes static binding mode commands
Table 13.6static-binding Commands
Command Description Reference
bootfileAssigns a bootfile name for the DHCP configuration on the network poolpage 13-41
client-nameConfigures a client namepage 13-42
default-routerConfigures default router or gateway IP addresspage 13-43
dns-serverSets the DNS server’s IP address available to all DHCP clients connected 
to the DHCP poolpage 13-44
domain-nameSets the domain name for the network poolpage 13-45
ip-addressConfigures a fixed IP address for a hostpage 13-46
netbios-name-serverConfigures a NetBIOS (WINS) name server IP addresspage 13-47
netbios-node-typeDefines the NetBIOS node typepage 13-48
next-serverSpecifies the next server used in the boot processpage 13-49
noNegates a command or sets its default valuepage 13-50
optionConfigures raw DHCP optionspage 13-52
respond-via-unicastSends a DHCP offer and DHCP Ack as unicast messagespage 13-53
static-routeAdds static routes to be installed on DHCP clientspage 13-54
    Add page 825 to Favourites
    image text
    Enable zoom 
    							DHCP-SERVER-POLICY 13 - 41
13.1.3.3.3  bootfile
static-binding-mode
The Bootfile command provides a diskless node the path to the image file used while booting up. Only one file can be 
configured for each static IP binding.
For more information on the BOOTP protocol with reference to static binding, see bootp.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
bootfile 
Parameters
• bootfile 
Examples
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#bootfile test.txt
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#
Related Commands
 Sets the path to the boot image for BOOTP clients. The file name can contain letters, 
numbers, dots and hyphens. Consecutive dots and hyphens are not permitted
noResets values or disables DHCP pool static binding commands
bootpConfigures BOOTP protocol parameters
    Add page 826 to Favourites
    image text
    Enable zoom 
    							13 - 42 WiNG CLI Reference Guide
13.1.3.3.4  client-name
static-binding-mode
Specifies a name for a client
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
client-name 
Parameters
• client-name 
Examples
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-1)#client-name RFID
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-1)#
Related Commands
 Specify a name for a client where this static binding policy is applied
noResets values or disables DHCP pool static binding commands
    Add page 827 to Favourites
    image text
    Enable zoom 
    							DHCP-SERVER-POLICY 13 - 43
13.1.3.3.5  default-router
dhcp-pool-mode
Configures a default router or gateway IP address for the static binding configuration
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
default-router  {}
Parameters
• default-router  {}
Usage Guidelines
The IP address of the router should be on the same subnet as the client subnet.
Examples
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#default-router 172.16.10.8 
172.16.10.9
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#
Related Commands
 Configures the network primary router
 Configures the secondary network router. If the primary router is not available, this 
router is used.
noResets values or disables DHCP pool static binding commands
    Add page 828 to Favourites
    image text
    Enable zoom 
    							13 - 44 WiNG CLI Reference Guide
13.1.3.3.6  dns-server
dhcp-pool-mode
Configures the DNS server for this static binding configuration. This DNS server supports the client for which the static 
binding has been configured.
For this client, the DNS server’s IP address maps the host name to an IP address. DHCP clients use the DNS server’s IP 
address based on the order (sequence) configured.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
dns-server 
Parameters
• dns-server 
Examples
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#dns-server 172.16.10.7
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#
Related Commands
 Configures the DNS server’s IP address
  – Sets the servers IP address (up to 8 IPs can be set)
noResets values or disables DHCP pool static binding commands
    Add page 829 to Favourites
    image text
    Enable zoom 
    							DHCP-SERVER-POLICY 13 - 45
13.1.3.3.7  domain-name
dhcp-pool-mode
Sets the domain name for the static binding configuration
For this client, the DNS server’s IP address maps the host name to an IP address. DHCP clients use the DNS server’s IP 
address based on the order (sequence) configured.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
domain-name 
Parameters
• domain-name 
Examples
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#domain-name documentation
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#
Related Commands
 Defines the domain name for the static binding configuration
noResets values or disables the DHCP pool static binding commands
    Add page 830 to Favourites
    image text
    Enable zoom 
    							13 - 46 WiNG CLI Reference Guide
13.1.3.3.8  ip-address
static-binding-mode
Configures a fixed IP address for a host
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
ip-address 
Parameters
• ip-address 
Examples
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-1)#ip-address 172.16.10.9
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-1)#
Related Commands
  Configures a fixed host IP address in dotted decimal format
noResets values or disables DHCP pool static binding commands
    All Motorola manuals Comments (0)