Home > Motorola > Wireless > Motorola Wing 5 Manual

Motorola Wing 5 Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Motorola Wing 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1128
    Add page 101 to Favourites
    image text
    Enable zoom 
    							PRIVILEGED EXEC MODE COMMANDS 3 - 9
--------------------------------------------------------------------------
CONTROLLER                   STATUS                   MESSAGE
--------------------------------------------------------------------------
  00-15-70-37-FA-BE          Success          Queued 0 APs to upgrade
--------------------------------------------------------------------------
rfs7000-37FABE#
    Add page 102 to Favourites
    image text
    Enable zoom 
    							3 - 10 WiNG CLI Reference Guide
3.1.2 archive
Privileged Exec Mode Commands
Manages file archive operations
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
archive tar /table [|]
archive tar /create [|] 
archive tar /xtract [|] ]
Parameters
• archive tar /table [|]
• archive tar /create [|] 
• archive tar /xtract [|] ]
tar Manipulates (creates, lists or extracts) a tar file
/table Lists the files in a tar file
 Defines a tar filename
 Sets the tar file URL
tar Manipulates (creates, lists or extracts) a tar file
/create Creates a tar file
 Defines tar filename
 Sets the tar file URL
tar Manipulates (creates, lists or extracts) a tar file
/xtract Extracts content from a tar file
 Defines tar filename
    Add page 103 to Favourites
    image text
    Enable zoom 
    							PRIVILEGED EXEC MODE COMMANDS 3 - 11
Examples
How to zip the folder flash:/log/?
rfs7000-37FABE#archive tar /create flash:/out.tar flash:/log/
tar: Removing leading / from member names
flash/log/
flash/log/snmpd.log
flash/log/messages.log
flash/log/startup.log
flash/log/radius/
rfs7000-37FABE#dir flash:/
 Sets the tar file URL
 Specify a directory name. When used with /create, dir is the source directory for the tar 
file. When used with /xtract, dir is the destination file where contents of the tar file are 
extracted.
    Add page 104 to Favourites
    image text
    Enable zoom 
    							3 - 12 WiNG CLI Reference Guide
3.1.3 boot
Privileged Exec Mode Commands
Specifies the image used after reboot
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
boot system [primary|secondary] {on }
Parameters
• boot system [primary|secondary] {on }
Examples
rfs7000-37FABE#boot system primary on rfs7000-37FABE
Updated system boot partition
rfs7000-37FABE#
system [primary|secondary] Specifies the image used after a device reboot
 primary – Uses a primary image after reboot
 secondary – Uses a secondary image after reboot
on  Optional. Specifies the primary or secondary image location on a specified device
  – Specify the name of the AP or wireless controller.
    Add page 105 to Favourites
    image text
    Enable zoom 
    							PRIVILEGED EXEC MODE COMMANDS 3 - 13
3.1.4 cd
Privileged Exec Mode Commands
Changes the current directory
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
cd {}
Parameters
• cd {}
Examples
rfs7000-37FABE#cd flash:/log/
rfs7000-37FABE#pwd
flash:/log/
rfs7000-37FABE#
 Optional. Changes the current directory to DIR. If a directory name is not provided, the 
system displays the current directory name.
    Add page 106 to Favourites
    image text
    Enable zoom 
    							3 - 14 WiNG CLI Reference Guide
3.1.5 change-passwd
Privileged Exec Mode Commands
Changes the password of a logged user. When this command is executed without any parameters, the password can be 
changed interactively.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
change-passwd { }
Parameters
• change passwd { }
Usage Guidelines
A password must be from 1 - 64 characters.
Examples
rfs7000-37FABE#change-passwd
Enter old password:
Enter new password:
Password for user admin changed successfully
Please write this password change to memory(write memory) to be persistent.
rfs7000-37FABE#write memory
OK
rfs7000-37FABE#
 
Optional. The password can also be changed interactively. To do so, press [Enter] after 
the command.
  – Specify the password that needs to be changed
  – Specify the password to change to
    Add page 107 to Favourites
    image text
    Enable zoom 
    							PRIVILEGED EXEC MODE COMMANDS 3 - 15
3.1.6 clear
Privileged Exec Mode Commands
Clears parameters, cache entries, table entries, and other entries. The clear command is available for specific commands 
only. The information cleared using this command varies depending on the mode where the clear command is executed.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
clear [arp-cache|cdp|counters|crypto|event-history|firewall|
  ip|lldp|spanning-tree]
clear arp-cache {on }
clear [cdp|lldp] neighbors {on }
clear counters [all|bridge|router|thread]
clear counters interface [|all|ge |me1|
   port-channel |vlan ]
clear crypto [ipsec|isakmp] sa [|all] {on }
clear event-history
clear firewall [dhcp snoop-table|dos stats|flows] {on }
clear ip dhcp bindings [|all] {on }
clear spanning-tree detected-protocols {interface |on }
clear spanning-tree detected-protocols {interface [|
  ge |me1|port-channel |vlan ]} {on
    Add page 108 to Favourites
    image text
    Enable zoom 
    							3 - 16 WiNG CLI Reference Guide
Parameters
• clear arp-cache {on }
• clear [cdp|lldp] neighbors {on }
• clear counters [all|bridge|router|thread]
• clear counters interface [|all|ge |me1|port-channel |
vlan ]
• clear crypto [ipsec|isakmp] sa [|all] {on }
arp-cache Clears Address Resolution Protocol (ARP) cache entries on an AP or wireless controller
on  Optional. Clears ARP cache entries on a specified device
  – Specify the name of the AP or wireless controller.
cdp Clears Cisco Discovery Protocol (CDP) table entries
ldp Clears Link Layer Discovery Protocol (LLDP) neighbor table entries
neighbors Clears CDP or LLDP neighbor table entries based on the option selected in the 
preceding step
on  Optional. Clears CDP or LLDP neighbor table entries on a specified device
  – Specify the name of the AP or wireless controller.
counters 
[all|bridge|router|thread]Clears counters on a system
 all – Clears all counters irrespective of the interface type
 bridge – Clears bridge counters
 router – Clears router counters
 thread – Clears per-thread counters
counters interface 
[|all|ge |
me1|port-channel |
vlan ]Clears interface counters for a specified interface
  – Clears a specified interface counters. Specify the interface name.
 all – Clears all interface counters
 ge – Clears GigabitEthernet interface counters. Specify the GigabitEthernet 
interface index from 1 - 4.
 me1 – Clears FastEthernet interface counters
 port-channel – Clears port-channel interface counters. Specify the port channel 
interface index from 1 - 2.
 vlan – Clears interface counters. Specify the Switch Virtual Interface (SVI) VLAN ID 
from 1 - 4094.
crypto Clears encryption module database
ipsec sa Clears Internet Protocol Security (IPSec) database security associations (SAs)
isakmp sa Clears Internet Security Association and Key Management Protocol (ISAKMP) 
database SAs
    Add page 109 to Favourites
    image text
    Enable zoom 
    							PRIVILEGED EXEC MODE COMMANDS 3 - 17
• clear event-history
• clear ip dhcp bindings [|all]
• clear firewall [dhcp snoop-table|dos stats|flows] {on }
• clear spanning-tree detected-protocols {on }
• clear spanning-tree detected-protocols {interface [|ge |me1|
port-channel |vlan ]} {on }
[|all] The following are common to the IPSec and ISAKMP parameters:
 Clears IPSec or ISAKMP SAs for a certain peer
 Clears IPSec or ISAKMP SAs for all peers
on  Optional. Clears IPSec or ISAKMP SA entries on a specified device
  – Specify the name of the AP or wireless controller.
event-history Clears event history cache entries
ip Clears Dynamic Host Configuration Protocol (DHCP) server IP address bindings
dhcp bindings Clears DHCP connections and server bindings
 bindings – Clears DHCP address binding entries
 Clears DHCP address binding entries on a specified DHCP server. Specify the DHCP 
server IP address.
all Clears DHCP address binding entries on all DHCP servers
firewall Clears firewall event entries
DHCP snoop-table Clears DHCP snoop table entries
dos stats Clears denial of service statistics
flows Clears established firewall sessions
on  The following are common to the DHCP, DOS, and flows parameters:
 on  – Optional. Clears DHCP snoop table entries, denial of service 
statistics, or the established firewall sessions on a specified device
  – Specify the name of the AP or wireless controller.
spanning-tree Clears spanning tree protocols on an interface, and also restarts protocol migration
detected-protocols Restarts protocol migration
on  Optional. Clears spanning tree protocols on a specified device
  – Optional. Specify the name of the AP or wireless controller.
spanning-tree Clears spanning tree protocols on an interface, and also restarts protocol migration
detected-protocols Restarts protocol migration
    Add page 110 to Favourites
    image text
    Enable zoom 
    							3 - 18 WiNG CLI Reference Guide
Examples
rfs7000-37FABE>clear crypto isakmp sa 111.222.333.01 on rfs7000-37FABE
rfs7000-37FABE>
rfs7000-37FABE>clear event-history
rfs7000-37FABE>
rfs7000-37FABE>clear spanning-tree detected-protocols interface port-channel 1 on 
rfs7000-37FABE
rfs7000-37FABE>
rfs7000-37FABE>clear ip dhcp bindings 172.16.10.9 on rfs7000-37FABE
rfs7000-37FABE>
rfs7000-37FABE#clear cdp neighbors on rfs7000-37FABE
rfs7000-37FABE#
RFS4000-880DA7#clear spanning-tree detected-protocols interface ge 1
RFS4000-880DA7#
RFS4000-880DA7#clear lldp neighbors
RFS4000-880DA7#
interface [|
ge
    All Motorola manuals Comments (0)