Home > Motorola > Wireless > Motorola Wing 5 Manual

Motorola Wing 5 Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Motorola Wing 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1128
    							ABOUT THIS GUIDE
    This manual supports the following wireless controllers and connected access points:
    • AP300
     AP621
     AP650
     AP6511
     AP6521
     AP6532
     AP71XX
     RFS4000
     RFS6000
     RFS7000
     NX9000
     NX9500
    This section is organized into the following:
    Document Convention
    Notational Conventions 
    						
    							xx WiNG CLI Reference Guide
    Document Convention
    The following conventions are used in this document to draw your attention to important information: 
    NOTE: Indicates tips or special requirements.
    CAUTION: Indicates conditions that can cause equipment damage or data loss.
    WARNING! Indicates a condition or procedure that could result in personal 
    injury or equipment damage.
    Switch Note: Indicates caveats unique to a RFS7000, RFS6000 or RFS4000 model
    controller.
    ! 
    						
    							Getting Started with the Mobile Computer xxi
    Notational Conventions
    The following notational conventions are used in this document:
     Italics are used to highlight specific items in the general text, and to identify chapters and sections in this and related 
    documents
     
     lists of alternatives
     lists of required steps that are not necessarily sequential
     action items
     Sequential lists (those describing step-by-step procedures) appear as numbered lists
    Understanding Command Syntax
    Variables are described with a short description enclosed within a ‘’ pair.
    For example, the command,
    rfs7000-37FABE>show interface ge 1
    is documented as
    show interface ge 
    show – The command – Display information
     interface – The keyword – The interface
      – The variable – ge Index value
    | The pipe symbol. This is used to separate the variables/keywords in a list.
    For example, the command
    rfs7000-37FABE> show .....
    is documented as
    show [adoption|advanced-wips|boot|captive-
    portal|......]
    where:
    
    show – The command
     [adoption|advanced-wips|boot|captive-portal|......
    ] – Indicates the different 
    commands that can be combined with the show command. However, only one 
    of the above list can be used at a time.
    show adoption ...
    show advanced-wips ...
    show boot ... 
    						
    							xxii WiNG CLI Reference Guide
    []Of the different keywords and variables listed inside a ‘[‘ & ‘]’ pair, only 
    one can be used. Each choice in the list is separated with a ‘|’ (pipe) 
    symbol.
    For example, the command
    rfs7000-37FABE# clear ...
    is documented as
    clear [arp-cache|cdp|crypto|event-history|
    firewall|ip|spanning-tree]
    where:
    
    clear – The command
     [arp-cache|cdp|crypto|event-history|firewall|ip|spanning-tree] – Indicates that 
    seven keywords are available for this command and only one can be used at a 
    time
    { }Any command/keyword/variable or a combination of them inside a ‘{‘ & ‘}’ 
    pair is optional. All optional commands follow the same conventions as 
    listed above. However they are displayed italicized.
    For example, the command
    rfs7000-37FABE> show adoption ....
    is documented as
    show adoption info {on }
    Here:
     show adoption info – The command. This command can also be used as 
    show adoption info
     {on } – The optional keyword on . The command can also be extended as
    show adoption info {on }
    Here the keyword {on } is optional. 
    						
    							Getting Started with the Mobile Computer xxiii
    command / keyword The first word is always a command. Keywords are words that must be 
    entered as is. Commands and keywords are mandatory.
    For example, the command,
    rfs7000-37FABE>show wireless
    is documented as
    show wireless
    where:
     show – The command
     wireless – The keyword
    ()Any command/keyword/variable or a combination of them inside a ‘(‘ & ‘)’ 
    pair are recursive. All recursive commands can be listed in any order and 
    can be used once along with the rest of the commands.
    For example, the command
    crypto pki export request generate-rsa-key 
    test autogen-subject-name ...
    is documented as
    rfs7000-37FABE#crypto pki export request 
    generate-rsa-key test autogen-subject-name 
    (,email ,fqdn ,ip-address 
    )
    Here:
     crypto pki export request generate-rsa-key 
    auto-gen-subject-name – is the command
    rfs7000-37FABE#crypto pki export request 
    generate-rsa-key test autogen-subject-name
     (,email ,fqdn ,ip-address ) – is the set of
    recursive parameters that can be used in any order.
    where every recursive command is separated by a comma ‘,’ 
    						
    							xxiv WiNG CLI Reference Guide
     Motorola Solutions Enterprise Mobility Support Center
    If you have a problem with your equipment, contact Motorola Solutions Enterprise Mobility Support for your region. 
    Contact information is available by visiting the URL:
     http://www.motorola
    solutions.com/Business/XP-EN/Pages/Contact_Us#contactus_tab 
    When contacting Enterprise Mobility support, please provide the following information:
    Serial number of the unit
    Model number or product name
    Software type and version number
    Motorola Solutions responds to calls by e-mail, telephone or fax within the time limits set forth in support agreements. If 
    you purchased your Enterprise Mobility business product from a Motorola Solutions business partner, contact that 
    business partner for support.
    Customer Support Web Site
    Motorola Solutions Support Central Web site, accessed via the Symbol-branded products link under Support for Business, 
    provides information and online assistance including developer tools, software downloads, product manuals and online 
    repair requests. Product support can be found at:
    http://www.motorola
    solutions.com/Business/XP-EN/Pages/Contact_Us#support_tab
    Product Sales and Product Information
    Motorola Solutions, Inc.
    One Motorola Plaza
    Holtsville, New York 11742-1300
    Tel: 1-631-738-2400 or 1-800-722-6234
    Fax: 1-631-738-5990
    General Information
    For general information, contact Motorola Solutions at:
    Telephone (North America): 1-800-722-6234
    Telephone (International): +1-631-738-5200
    Website: http://www.motorola
    solutions.com 
    						
    							Getting Started with the Mobile Computer xxv
    Motorola Solutions, Inc. 
    End-User License Agreement
    BY DOWNLOADING, INSTALLING, OR USING THE SOFTWARE DESCRIBED IN THIS DOCUMENT, YOU OR THE ENTITY OR COMPANY 
    THAT YOU REPRESENT (LICENSEE) ARE UNCONDITIONALLY CONSENTING TO BE BOUND BY AND ARE BECOMING A PARTY TO 
    THIS LICENSE AGREEMENT (AGREEMENT). LICENSEES USE OR CONTINUED USE OF THE DOWNLOADED OR INSTALLED 
    MATERIALS SHALL ALSO CONSTITUTE ASSENT TO THE TERMS OF THIS AGREEMENT. IF LICENSEE DOES NOT UNCONDITIONALLY 
    AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, DO NOT CONTINUTE THE INSTALLATION PROCESS. IF THESE TERMS ARE 
    CONSIDERED AN OFFER, ACCEPTANCE IS EXPRESSLY LIMITED TO AND EXPRESSLY CONTINGENT UPON THESE TERMS. IF YOU ARE 
    ACCEPTING THESE TERMS ON BEHALF OF A COMPANY, ANOTHER PERSON OR ANY OTHER LEGAL ENTITY, YOU REPRESENT AND 
    WARRANT THAT YOU HAVE THE AUTHORITY TO BIND THAT COMPANY, PERSON OR ENTITY. 
    1. LICENSE GRANT. Subject to the terms of this Agreement, Motorola Solutions, Inc. and/or its subsidiaries (Licensor) hereby 
    grants Licensee a limited, personal, non-sublicensable, non transferable, non-exclusive license to use the software that 
    Licensee is about to download or install and the documentation that accompanies it (collectively, the Software) for 
    Licensees personal use in connection with hardware produced by Licensor and only in accordance with the accompanying 
    documentation. Licensee may download, install and use the Software only on a single computer. Licensee may make one 
    copy of the Software (excluding any documentation) for backup purposes, provided that copyright and other restricted rights 
    notices of Licensor and its suppliers are reproduced exactly.
    2. LICENSE RESTRICTIONS. Except as expressly permitted by this Agreement, Licensee shall not, nor permit anyone else to, 
    directly or indirectly: (i) copy (except for one backup copy), modify, distribute or create derivative works based upon the 
    Software; (ii) reverse engineer, disassemble, decompile or otherwise attempt to discover the source code or structure, 
    sequence and organization of the Software; or (iii) rent, lease, or use the Software for timesharing or service bureau 
    purposes, or otherwise use the Software for any commercial purpose/on behalf of any third party. Licensee shall maintain 
    and not remove or obscure any proprietary notices on the Software, and shall reproduce such notices exactly on all permitted 
    copies of the Software. All title, ownership rights, and intellectual property rights in and to the Software, and any copies or 
    portions thereof, shall remain in Licensor and its suppliers or licensors. Licensee understands that Licensor may modify or 
    discontinue offering the Software at any time. The Software is protected by the copyright laws of the United States and 
    international copyright treaties. The Software is licensed, not sold. This Agreement does not give Licensee any rights not 
    expressly granted herein.
    3. INTELLECTUAL PROPERTY; CONTENT. All title and intellectual property rights in and to the Software (including but not 
    limited to any images, photographs, animations, video, audio, music, text and applets incorporated into the Software), and 
    any copies you are permitted to make herein are owned by Licensor or its suppliers. All title and intellectual property rights 
    in and to the content which may be accessed through use of the Software is the property of the respective content owner 
    and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights 
    to use such content. As a condition to Licensees use of the Software, Licensee represents, warrants and covenants that 
    Licensee will not use the Software: (i) to infringe the intellectual property rights or proprietary rights, or rights of publicity 
    or privacy, of any third party; (ii) to violate any applicable law, statute, ordinance or regulation; (iii) to disseminate information 
    or materials in any form or format (Content) that are harmful, threatening, abusive, harassing, tortuous, defamatory, vulgar, 
    obscene, libelous, or otherwise objectionable; or (iv) to disseminate any software viruses or any other computer code, files 
    or programs that may interrupt, destroy or limit the functionality of any computer software or hardware or 
    telecommunications equipment. Licensee, not Licensor, remains solely responsible for all Content that Licensee uploads, 
    posts, e-mails, transmits, or otherwise disseminates using, or in connection with, the Software.
    4. FEES; SUPPORT AND UPGRADES. Licensor may, at Licensors sole option, provide support services related to the Software 
    (Support Services). Nothing in this Agreement grants Licensee any right to receive any Support Services. Use of any 
    Support Services provided is governed by the Licensor policies and programs described in the user manual, in online 
    documentation, and/or in other Licensor-provided materials or support agreements. Any supplemental software code 
    provided to you as part of any Support Services shall be considered part of the Software and subject to the terms and 
    conditions of this EULA. With respect to technical information you provide to Licensor as part of any Support Services,  
    						
    							xxvi WiNG CLI Reference Guide
    Licensor may use such information for its business purposes, including for product support and development. Licensor will 
    not utilize such technical information in a form that personally identifies Licensee.
    5. TERMINATION. Either party may terminate this Agreement at any time, with or without cause, upon written notice. Any 
    termination of this Agreement shall also terminate the licenses granted hereunder. Upon termination of this Agreement for 
    any reason, Licensee shall return all copies of the Software to Licensor, or destroy and remove from all computers, hard 
    drives, networks, and other storage media all copies of the Software, and shall so certify to Licensor that such actions have 
    occurred. Sections 2-13 shall survive termination of this Agreement.
    6. DISCLAIMER OF WARRANTIES. To the maximum extent permitted by applicable law, Licensor and its suppliers provide the 
    Software and any (if any) Support Services AS IS AND WITH ALL FAULTS, and hereby disclaim all warranties and conditions, 
    either express, implied or statutory, including, but not limited to, any (if any) implied warranties or conditions of 
    merchantability, of fitness for a particular purpose, of lack of viruses, of accuracy or completeness of responses, of results, 
    and of lack of negligence or lack of workmanlike effort, all with regard to the Software, and the provision of or failure to 
    provide Support Services. ALSO, THERE IS NO WARRANTY OR CONDITION OF TITLE, QUIET ENJOYMENT, QUIET 
    POSSESSION, CORRESPONDENCE TO DESCRIPTION, OR NONINFRINGEMENT WITH REGARD TO THE SOFTWARE. THE 
    ENTIRE RISK AS TO THE QUALITY OF OR ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE AND SUPPORT 
    SERVICES, IF ANY, REMAINS WITH LICENSEE.
    7. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN OTHER DAMAGES. TO THE MAXIMUM EXTENT PERMITTED 
    BY APPLICABLE LAW, IN NO EVENT SHALL LICENSOR OR ITS SUPPLIERS BE LIABLE FOR ANY GENERAL, SPECIAL, 
    INCIDENTAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, 
    DAMAGES FOR LOSS OF PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR BUSINESS INTERRUPTION, FOR 
    PERSONAL INJURY, FOR LOSS OF PRIVACY, FOR FAILURE TO MEET ANY DUTY INCLUDING OF GOOD FAITH OR OF 
    REASONABLE CARE, FOR NEGLIGENCE, AND FOR ANY OTHER PECUNIARY OR OTHER LOSS WHATSOEVER) ARISING OUT 
    OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF OR FAILURE TO 
    PROVIDE SUPPORT SERVICES, OR OTHERWISE UNDER OR IN CONNECTION WITH ANY PROVISION OF THIS AGREEMENT, 
    EVEN IN THE EVENT OF THE FAULT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT OR BREACH 
    OF WARRANTY OF LICENSOR OR ANY SUPPLIER, AND EVEN IF LICENSOR OR ANY SUPPLIER HAS BEEN ADVISED OF THE 
    POSSIBILITY OF SUCH DAMAGES.
    8. LIMITATION OF LIABILITY AND REMEDIES. Notwithstanding any damages that Licensee might incur for any reason 
    whatsoever (including, without limitation, all damages referenced above and all direct or general damages), the entire 
    liability of Licensor and any of its suppliers under any provision of this Agreement and Licensees exclusive remedy for all of 
    the foregoing shall be limited to the greater of the amount actually paid by Licensee for the Software or U.S.$5.00. The 
    foregoing limitations, exclusions and disclaimers shall apply to the maximum extent permitted by applicable law, even if any 
    remedy fails its essential purpose. 
    						
    							Getting Started with the Mobile Computer xxvii
    9. INDEMNITY. Licensee agrees that Licensor shall have no liability whatsoever for any use Licensee makes of the Software. 
    Licensee shall indemnify and hold harmless Licensor from any claims, damages, liabilities, costs and fees (including 
    reasonable attorney fees) arising from Licensees use of the Software as well as from Licensees failure to comply with any 
    term of this Agreement.
    10. FAULT TOLERANCE. The Software is not fault-tolerant and is not designed, manufactured or intended for use or resale in on-
    line control equipment in hazardous environments requiring fail-safe performance, such as, but not limited to, the operation 
    of nuclear facilities, aircraft navigation or communication systems, air traffic control, life support machines, or weapons 
    systems, in which the failure of the Software could lead directly or indirectly to death, personal injury, or physical or 
    environmental damage (High Risk Activities). Licensor and its suppliers specifically disclaim any express or implied 
    warranty of fitness for High Risk Activities.
    11. U.S. GOVERNMENT LICENSE RIGHTS. Software provided to the U.S. Government pursuant to solicitations issued on or after 
    December 1, 1995 is provided with the commercial license rights and restrictions described elsewhere herein. Software 
    provided to the U.S. Government pursuant to solicitations issued prior to December 1, 1995 is provided with Restricted 
    Rights as provided for in FAR, 48 CFR 52.227-14 (JUNE 1987) or DFAR, 48 CFR 252.227- 7013 (OCT 1988), as applicable. The 
    Manufacturer for purposes of these regulations is Motorola Solutions, Inc., One Symbol Plaza, Holtsville, NY 11742.
    12. EXPORT RESTRICTIONS. Licensee shall comply with all export laws and restrictions and regulations of the Department of 
    Commerce, the United States Department of Treasury Office of Foreign Assets Control (OFAC), or other United States or 
    foreign agency or authority, and Licensee shall not export, or allow the export or re-export of the Software in violation of any 
    such restrictions, laws or regulations. By downloading or using the Software, Licensee agrees to the foregoing and 
    represents and warrants that Licensee is not located in, under the control of, or a national or resident of any restricted 
    country.
    13. MISCELLANEOUS. Licensee may not sublicense, assign, or transfer this Agreement, or its rights or obligations hereunder, 
    without the prior written consent of Licensor. Any attempt to otherwise sublicense, assign, or transfer any of the rights, 
    duties, or obligations hereunder is null and void. Licensor may assign this Agreement in its sole discretion. In the event that 
    any of the provisions of this Agreement shall be held by a court or other tribunal of competent jurisdiction to be illegal, invalid 
    or unenforceable, such provisions shall be limited or eliminated to the minimum extent necessary so that this Agreement 
    shall otherwise remain in full force and effect. No waiver or modification of this Agreement will be binding upon a party 
    unless made in writing and signed by a duly authorized representative of such party and no failure or delay in enforcing any 
    right will be deemed a waiver. This Agreement shall be governed by the laws of the State of New York without regard to the 
    conflicts of law provisions thereof. The application the United Nations Convention of Contracts for the International Sale of 
    Goods is expressly excluded. Unless waived by Licensor for a particular instance, any action or proceeding arising out of this 
    Agreement must be brought exclusively in the state or federal courts of New York and Licensee hereby consents to the 
    jurisdiction of such courts for any such action or proceeding. This Agreement supersedes all prior discussions and writings 
    and constitutes the entire agreement between the parties with respect to the subject matter hereof. The prevailing party in 
    any action arising out of this Agreement shall be entitled to costs and attorneys fees. 
    						
    							xxviii WiNG CLI Reference Guide 
    						
    All Motorola manuals Comments (0)