Home > Motorola > Wireless > Motorola Wing 5 Manual

Motorola Wing 5 Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Motorola Wing 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1128
    Add page 441 to Favourites
    image text
    Enable zoom 
    							SHOW COMMANDS 6 - 13
Examples
rfs7000-37FABE(config)#show ap-upgrade history
------------------------------------------------------------------------------------  
  
  
  
  
  
  
  
AP        RESULT      TIME         RETRIES      UPGRADED-BY    LAST-UPDATE-ERROR
------------------------------------------------------------------------------------
 00-04-96-44-54-C0        done  2011-03-31 02:06:39        0                00-04-96-
42-14-79 -
 00-04-96-44-54-C0        done  2011-04-14 00:46:52        0                00-04-96-
42-14-79 -
 00-04-96-44-54-C0        done  2011-04-25 00:12:00        0                00-04-96-
42-14-79 -
 00-04-96-44-54-C0        done  2011-04-28 07:17:38        0                00-04-96-
42-14-79 -
 00-04-96-44-54-C0        done  2011-05-04 12:15:31        0                00-04-96-
42-14-79 -
Total number of entries displayed: 5
    Add page 442 to Favourites
    image text
    Enable zoom 
    							6 - 14 WiNG CLI Reference Guide
6.1.5 boot
show commands
Displays a device’s boot configuration. Use the on command to view a remote device’s boot configuration.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show boot {on }
Parameters
• show boot {on }
Examples
rfs7000-37FABE(config)#show boot on rfs7000-37FABE
--------------------------------------------------------------------------
     IMAGE            BUILD DATE             INSTALL DATE          VERSION
--------------------------------------------------------------------------
  Primary       2011-05-10 09:58:17     2010-02-07 10:33:55     5.2.0.0-026D
  Secondary     2011-06-10 21:29:31     2011-06-15 14:21:17     5.2.0.0-033D
--------------------------------------------------------------------------
Current Boot       : Secondary
Next Boot          : Secondary
Software Fallback  : Enabled
rfs7000-37FABE(config)#
NOTE: This command is not present in the USER EXEC Mode.
boot  Displays primary and secondary image boot configuration details (build date, install 
date, version, and the image used to boot the current session)
on  Optional. Displays boot configuration information on a specified device
  – Specify the name of the AP or wireless controller.
    Add page 443 to Favourites
    image text
    Enable zoom 
    							SHOW COMMANDS 6 - 15
6.1.6 captive-portal
show commands
Displays WLAN hotspot information
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show captive-portal client {filter|on}
show captive-portal client {filter [captive-portal|ip|state|vlan|wlan]}
show captive-portal client {filter captive-portal [|
not ]}]
show captive-portal client {filter ip [|not ]}
show captive-portal client {filter state [not[pending|success]
|pending|success]}
show captive-portal client {filter vlan [|not ]}
show captive-portal client {filter wlan [|not ]}
show captive-portal client {on  {filter {captive-portal|
ip|state|vlan|wlan}}
Parameters
• show captive-portal client {filter captive-portal [|
not ]}
• show captive-portal client {filter ip [|not ]}
captive-portal client Displays captive portal client information
filter Optional. Defines additional filters
captive-portal 
[|
not ]Optional. Displays a specified captive portal client information
  – Specify the captive portal name.
 not  – Inverts the match selection
captive-portal client Displays captive portal client information
filter Optional. Defines additional filters
ip [|not ] Displays captive portal client information based on the IP address passed
  – Specify the IP address.
 not  – Inverts the match selection
    Add page 444 to Favourites
    image text
    Enable zoom 
    							6 - 16 WiNG CLI Reference Guide
• show captive-portal client {filter state [not [pending|success]|
pending|success]}
• show captive-portal client {filter vlan [|not ]}
• show captive-portal client {filter wlan [|not ]}
• show captive-portal client {on  filter [captive-
portal|ip|state|vlan|wlan]}
captive-portal client Displays captive portal client information
filter Optional. Defines additional filters
state not [pending|success]] Optional. Filters clients based on their authentication state
 not – Inverts match selection
 pending – Displays clients successfully authenticated (Opposite of pending authen-
tication)
 success – Displays clients redirected for authentication (Opposite of successful au-
thentication)
state [pending|success]] Optional. Filters clients based on their authentication state
 pending – Displays clients redirected for authentication
 success – Displays clients successfully authenticated
captive-portal client Displays captive portal client information
filter Optional. Defines additional filters
vlan [|
not ]Optional. Displays clients on a specified VLAN
  – Specify the VLAN ID.
 not  – Inverts match selection
captive-portal client Displays captive portal client information
filter Optional. Defines additional filters
wlan [|
not ]Optional. Displays clients on a specified WLAN
  – Specify the WLAN ID.
 not  – Inverts match selection
captive-portal client Displays captive portal client information
on Optional. Displays captive portal clients on a specified device or RF Domain
  – Specify the name of the AP, wireless controller, or 
RF Domain.
filter Optional. Defines additional filters
 captive-portal – Optional. Displays client information for a specified captive portal
 ip – Optional. Displays captive portal client information based on the IP address 
passed
 state – Optional. Displays client information based on the their authentication state
 vlan – Displays clients on a specified VLAN
 wlan – Optional. Displays clients on a specified WLAN
    Add page 445 to Favourites
    image text
    Enable zoom 
    							SHOW COMMANDS 6 - 17
Examples
rfs7000-37FABE(config)#show captive-portal client on RFS7000-421479
------------------------------------------------------------------------------------
CLIENT     IP         CAPTIVE-PORTAL        WLAN        VLAN    STATE       SESSION TIME
------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
Total number of captive portal clients displayed: 0
    Add page 446 to Favourites
    image text
    Enable zoom 
    							6 - 18 WiNG CLI Reference Guide
6.1.7 cdp
show commands
Displays the Cisco Discovery Protocol (CDP) neighbor table
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show cdp [neighbors|report] {detail {on }|
on }
Parameters
• show cdp [neighbors|report] {detail {on }|on }
cdp [neighbors|report] Displays CDP neighbors table or aggregated CDP neighbors table
detail 
{on }Optional. Displays CDP neighbors table or aggregated CDP neighbors table details
 on  – Optional. Displays table details on a specified 
device or RF Domain
  – Specify the name of the AP, wireless controller, or
RF Domain.
on Optional. Displays table details on a specified device or domain (This option does not 
display detailed information)
  – Specify the name of the AP, wireless controller, or 
RF Domain.
    Add page 447 to Favourites
    image text
    Enable zoom 
    							SHOW COMMANDS 6 - 19
Examples
The following example displays CDP neighbors table in detail.
rfs7000-37FABE(config)#show cdp neighbors detail on rfs7000-37FABE
-------------------------
Device ID: RFS4000-229D58
Entry address(es):
  IP Address: 172.16.10.6
  IP Address: 169.254.157.88
Platform: RFS-4010-00010-WR, Capabilites: Router Switch
Interface: ge1, Port ID (outgoing port): ge1
Hold Time: 173 sec
advertisement version: 2
Native VLAN: 1
Duplex: full
Version :
5.2.0.0-048B
-------------------------
Device ID: wm3600-380649
Entry address(es):
  IP Address: 2.2.2.2
  IP Address: 172.16.10.4
Platform: RFS6000, Capabilites: Router Switch
Interface: ge1, Port ID (outgoing port): ge1
Hold Time: 173 sec
advertisement version: 2
--More--
rfs7000-37FABE(config)#
The following example shows a non-detailed CDP neighbors table.
rfs7000-37FABE(config)#show cdp neighbors on rfs7000-37FABE
--------------------------------------------------------------------------
   Device ID    Neighbor IP       Platform      Local Intrfce  Port ID   Duplex
--------------------------------------------------------------------------
 wm3400-229D58  172.16.10.6  RFS-4010-00010-WR  ge1            ge1      full
 wm3600-380649  2.2.2.2      RFS6000            ge1            ge1      full
--------------------------------------------------------------------------
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show cdp neighbors on rfs7000-37FABE
--------------------------------------------------------------------------------
   Device ID      Neighbor IP     Platform  Local Intrfce  Port ID     Duplex
--------------------------------------------------------------------------------
 ap4600-4454C0  169.254.84.192  AP4610-ROW  ge8            ge1      full
--------------------------------------------------------------------------------
    Add page 448 to Favourites
    image text
    Enable zoom 
    							6 - 20 WiNG CLI Reference Guide
6.1.8 clock
show commands
Displays a system’s clock
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show clock {on }
Parameters
• show clock {on }
Examples
rfs7000-37FABE(config)#show clock
2011-06-21 14:14:49 IST
rfs7000-37FABE(config)#
clock Displays a system’s clock
on  Optional. Displays system clock on a specified device
  – Specify the name of the AP, wireless controller, or RF Domain.
    Add page 449 to Favourites
    image text
    Enable zoom 
    							SHOW COMMANDS 6 - 21
6.1.9 cluster
show commands
Displays cluster information (cluster configuration parameters, members, status etc.)
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
show cluster [configuration|members {detail}|status]
Parameters
• show cluster [configuration|members {detail}|status]
cluster Displays cluster information
configuration Displays cluster configuration parameters
members {detail} Displays cluster members configured on the logged device
 detail – Optional. Displays detailed information of known cluster members
status Displays cluster status
    Add page 450 to Favourites
    image text
    Enable zoom 
    							6 - 22 WiNG CLI Reference Guide
Examples
rfs7000-37FABE(config)#show cluster configuration
Cluster Configuration Information
 Mode                            : Active
 Number of peer(s)               : 0
 Auto revert                     : Disabled
 Auto revert interval (Mins)     : 5
 Controller AP license               : 0
 Controller AAP license              : 0
 Controller max AP adoption capacity : 1024
Cluster Runtime Information
 Cluster protocol version         : 1
 Cluster run state                : active
 Cluster AP license               : 0
 Cluster AAP license              : 0
 Controller AP count                  : 0
 Controller AAP count                 : 0
 Cluster AP count                 : 0
 Cluster AAP count                : 0
 Cluster max AP adoption capacity : 1024
 Number of connected peer(s)      : 0
rfs7000-37FABE(config)#show cluster members detail
+-------------+-------------------+--------+--------+---------+----------|      ID | 
MAC  |  MODE  |AP COUNT|AAP COUNT|AP LICENSE|AAP LICENSE|   VERSION   |
+-------------+-------------------+--------+--------+---------+----------| 
70.37.fa.be | 00-15-70-37-FA-BE | Active | 0      | 0       | 0        | 0    | Unknown     |
+-------------+-------------------+--------+--------+---------+----------+
    All Motorola manuals Comments (0)