Motorola Wing 5 Manual
Have a look at the manual Motorola Wing 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
GLOBAL CONFIGURATION COMMANDS 4 - 15 4.1.10 association-acl-policy Global Configuration Commands Configures an association ACL policy. This policy configures a list of devices allowed or denied access to the wireless controller managed network. Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax association-acl-policy Parameters • association-acl-policy Examples rfs7000-37FABE(config)#association-acl-policy test rfs7000-37FABE(config-assoc-acl-test)# Related Commands Specify the association ACL policy name. If the policy does not exist, it is created. noResets values or disables commands NOTE: For more information on the association-acl-policy, see Chapter 11, ASSOCIATION-ACL-POLICY.
4 - 16 WiNG CLI Reference Guide 4.1.11 auto-provisioning-policy Global Configuration Commands Configures an auto provisioning policy. This policy is used to configure the automatic provisioning of device adoption. The policy configures how an AP is adopted based on its type. Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax auto-provisioning-policy Parameters • auto-provisioning-policy Examples rfs7000-37FABE(config)#auto-provisioning-policy test rfs7000-37FABE(config-auto-provisioning-policy-test)# Related Commands Specify the auto provisioning policy name. If the policy does not exist, it is created. noResets values or disables commands NOTE: For more information on the association-acl-policy, see Chapter 9, AUTO- PROVISIONING-POLICY.
GLOBAL CONFIGURATION COMMANDS 4 - 17 4.1.12 captive portal Global Configuration Commands The captive portal mode configures a hotspot. Table 4.2 lists the command to enter the captive portal configuration mode. Table 4.2Captive-Portal Commands Command Description Reference captive-portalConfigures captive portal Web page parameterspage 4-18
4 - 18 WiNG CLI Reference Guide 4.1.12.1 captive-portal captive portal Configures a captive portal. A captive portal is a hotspot type guest WLAN where users access wireless controller resources. Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax captive-portal Parameters • captive-portal Examples rfs7000-37FABE(config)#captive-portal testportal rfs7000-37FABE(config-captive-portal-testportal)# Related Commands Specify the captive portal name. If the captive portal does not exist, it is created. noResets values or disables commands
GLOBAL CONFIGURATION COMMANDS 4 - 19 4.1.12.2 captive-portal-mode commands Table 4.3 summarizes captive portal mode commands Table 4.3Captive-Portal-Mode Commands Command Description Reference access-timeDefines a client’s access time. It is used when no session time is defined in the RADIUS responsepage 4-20 access-typeConfigures a captive portal’s access typepage 4-21 accountingEnables a captive portal’s accounting recordspage 4-22 connection-modeConfigures a captive portal’s connection modepage 4-23 custom-authConfigures custom user informationpage 4-24 inactivity-timeoutDefines an inactivity timeout in secondspage 4-25 noResets or disables captive portal commands page 4-26 serverConfigures the captive portal server parameterpage 4-30 simultaneous- usersSpecifies a username used by a MAC address poolpage 4-31 terms-agreementEnforces the user to agree to terms and conditions (included in login page) for captive portal accesspage 4-32 useDefines captive portal configuration settingspage 4-33 webpage-locationSpecifies the location of Web pages used for captive portal authenticationpage 4-34 webpageConfigures captive portal Web page parameterspage 4-35 clrscrClears the display screenpage 5-3 commitCommits (saves) changes made in the current sessionpage 5-4 doRuns commands from EXEC modepage 4-66 endEnds and exits the current mode and moves to the PRIV EXEC modepage 5-5 exitEnds the current mode and moves to the previous modepage 5-6 helpDisplays the interactive help systempage 5-7 revertReverts changes to their last saved configurationpage 5-13 serviceInvokes service commands to troubleshoot or debug (config-if) instance configurationspage 5-14 showDisplays running system informationpage 6-4 writeWrites information to memory or terminalpage 5-42
4 - 20 WiNG CLI Reference Guide 4.1.12.2.1 access-time captive-portal-mode commands Defines the permitted access time for a client. It is used when no session time is defined in the RADIUS response. Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax access-time Parameters • access-time Examples rfs7000-37FABE(config-captive-portal-test)#access-time 35 rfs7000-37FABE(config-captive-portal-test)# Related Commands Defines the access time allowed for a wireless client from 30 - 10080 minutes noResets or disables captive portal commands
GLOBAL CONFIGURATION COMMANDS 4 - 21 4.1.12.2.2 access-type captive-portal-mode commands Defines the captive portal access type Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax access-type [custom-auth-radius|logging|no-auth|radius] Parameters • access-type [custom-auth-radius|logging|no-auth|radius] Examples rfs7000-37FABEE(config-captive-portal-test)#access-type radius rfs7000-37FABE(config-captive-portal-test)# rfs7000-37FABE(config-captive-portal-testportal)#access-type logging rfs7000-37FABE(config-captive-portal-testportal)# Related Commands custom-auth-radius Verifies custom user information for authentication logging Generates a logging record of users and allowed access no-auth Configures a no authentication required for a guest (redirected to welcome message) radius Enables RADIUS authentication for wireless clients noResets or disables captive portal commands
4 - 22 WiNG CLI Reference Guide
4.1.12.2.3 accounting
captive-portal-mode commands
Enables accounting records for a captive portal
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
accounting [radius|syslog]
accounting radius
accounting syslog host {port }
Parameters
• accounting radius
• accounting syslog host {port }
Examples
rfs7000-37FABE(config-captive-portal-test)#accounting syslog host 172.16.10.13 port 1
rfs7000-37FABE(config-captive-portal-test)#
Related Commands
radius Enables support for RADIUS accounting messages
syslog
host Enables support for syslog accounting messages
host – Specifies the syslog server host address. Specify the IP
address or hostname of the syslog server.
port Optional. Specifies the syslog server’s listener port
– Specify the UDP port from 1- 65535.
noResets or disables captive portal commands
GLOBAL CONFIGURATION COMMANDS 4 - 23 4.1.12.2.4 connection-mode captive-portal-mode commands Configures a captive portal’s connection mode. HTTP uses plain unsecured connection for user requests. HTTPS uses encrypted connection to support user requests. Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax connection-mode [http|https] Parameters connection-mode [http|https] Examples rfs7000-37FABE(config-captive-portal-test)#connection-mode https rfs7000-37FABE(config-captive-portal-test)# Related Commands http Sets HHTP as the default connection mode https Sets HHTPS as the default connection mode HTTPS is a more secure version of HTTP, and uses encryption while sending and receiving requests noResets or disables captive portal commands
4 - 24 WiNG CLI Reference Guide 4.1.12.2.5 custom-auth captive-portal-mode commands Configures custom user information when authenticating with the RADIUS server Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax custom-auth info Parameters • custom-auth info Examples rfs7000-37FABE(config-captive-portal-test)#custom-auth info testuser [email protected] rfs7000-37FABE(config-captive-portal-test)# rfs7000-37FABE(config-captive-portal-testportal)#custom-auth info bob, [email protected], 9902833119 rfs7000-37FABE(config-captive-portal-testportal)#show context captive-portal testportal access-type logging custom-auth info bob, [email protected], 9902833119 rfs7000-37FABE(config-captive-portal-testportal)# Related Commands info Configures information used for RADIUS lookup when custom auth radius access type is configured – Guest data needs to be provided. Specify the name, e-mail address and telephone number of the user. noResets or disables captive portal commands