Home > Motorola > Wireless > Motorola Wing 5 Manual

Motorola Wing 5 Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Motorola Wing 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1128
    Add page 581 to Favourites
    image text
    Enable zoom 
    							PROFILES 7 - 55
7.1.17 email-notification
Creating Profiles
Configures e-mail notification settings
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
email-notification [host |recipient ]
email-notification host  sender  {port|username}
email-notification host  sender  {port } 
{username  password [2 |]}
email-notification host  sender  {username  
password [2 |]} {port }
Parameters
• email-notification recipient 
• email-notification host  sender  {port }{username 
} password [2 |]}
recipient Defines the e-mail address of the recipient
  – Specify the e-mail address of the recipient.
host  Configures the host SMTP server
   – Specify the IP address of the SMTP server.
sender  Defines the e-mail address of the sender
  – Specify the e-mail address of the sender.
port  Optional. Configures the SMTP server port
  – Specify the port from 1 - 65535.
username 
Optional. Configures the SMTP server username
  – Specify the SMTP username.
    Add page 582 to Favourites
    image text
    Enable zoom 
    							7 - 56 WiNG CLI Reference Guide
• email-notification host  sender  {username  
password [2 |]} {port }
Examples
rfs7000-37FABEconfig-profile-default-RFS7000)#email-notification recipient 
[email protected]
rfs7000-37FABE(config-profile-default-RFS7000)#show context
profile RFS7000 default-RFS7000
 dscp-mapping 20 priority 7
 no autoinstall configuration
 no autoinstall firmware
 crypto isakmp policy default
 crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
  ip dhcp trust
  interface ge2
  ip dhcp trust
  qos trust dscp
  qos trust 802.1p
 interface ge3
  ip dhcp trust
  qos trust dscp
  qos trust 802.1p
 interface ge4
  ip dhcp trust
  qos trust dscp
  qos trust 802.1p
 use firewall-policy default
 email-notification recipient [email protected]
 service pm sys-restart
Related Commands
password 
[2 |]Configures the SMTP server password
 2  – Configures an encrypted password
  – Specify the password.
recipient Defines the e-mail address of the recipient
  – Specify the e-mail address of the recipient.
host  Configures the host SMTP server
  – Specify the IP address of the SMTP server.
sender  Defines the e-mail address of the sender
  – Specify the e-mail address of the sender.
username 
Optional. Configures the SMTP username
  – Specify the SMTP username.
password 
[2 |]Configures the SMTP server password
 2  – Configures an encrypted password
  – Specify the password.
port  Optional. Configures the SMTP server port
  – Specify the port from 1 - 65535.
noDisables or reverts settings to their default
    Add page 583 to Favourites
    image text
    Enable zoom 
    							PROFILES 7 - 57
7.1.18 enforce-version
Creating Profiles
Checks device firmware versions before attempting connection
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
enforce-version [adoption|cluster] [full|major|none|strict]
Parameters
• enforce-version [adoption|cluster] [full|major|none|strict]
adoption Checks firmware versions before adopting
cluster Checks firmware versions before clustering
full Allows adoption or clustering when firmware versions match exactly
major Allows adoption or clustering when major and minor versions match exactly
none Allows adoption or clustering between any firmware versions
strict Allows adoption or clustering when firmware versions match exactly
    Add page 584 to Favourites
    image text
    Enable zoom 
    							7 - 58 WiNG CLI Reference Guide
Examples
rfs7000-37FABE(config-profile-default)#enforce-version cluster full
rfs7000-37FABE(config-profile-default)#enforce-version adoption major
rfs7000-37FABE(config-profile-default-RFS7000)#show context
profile RFS7000 default-RFS7000
 dscp-mapping 20 priority 7
 no autoinstall configuration
 no autoinstall firmware
 crypto isakmp policy default
 crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
 interface me1
 interface ge1
 ip dhcp trust
 qos trust dscp
 qos trust 802.1p
 interface ge2
  ip dhcp trust
  qos trust dscp
  qos trust 802.1p
  interface ge3
  ip dhcp trust
  qos trust dscp
  qos trust 802.1p
  interface ge4
  ip dhcp trust
  qos trust dscp
  qos trust 802.1p
  use firewall-policy default
  email-notification recipient [email protected]
  enforce-version adoption major
  enforce-version cluster full
  service pm sys-restart
Related Commands
noDisables or reverts settings to their default
    Add page 585 to Favourites
    image text
    Enable zoom 
    							PROFILES 7 - 59
7.1.19 events
Creating Profiles
Displays system event messages
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
events [forward on|on]
Parameters
• event [forward on|on]
Examples
rfs7000-37FABE(config-profile-default-RFS7000)#events forward on
rfs7000-37FABE(config-profile-default-RFS7000)#
Related Commands
forward on Forwards system event messages to the wireless controller or cluster members
 on – Enables forwarding of system events
on Generates system events on this wireless controller
noDisables or reverts settings to their default
    Add page 586 to Favourites
    image text
    Enable zoom 
    							7 - 60 WiNG CLI Reference Guide
7.1.20 ip 
Creating Profiles
Configures IP components, such as default gateway, DHCP, Domain Name Service (DNS) server forwarding, 
name server, domain name, routing standards etc.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
ip [default-gateway|dhcp|dns-server-forward|domain-lookup|domain-name|local|
name-server|nat|route|routing
ip [default-gateway |dns-server-forward|domain-lookup|
domain-name |name-server |routing]
ip dhcp client [hostname|persistent-lease]
ip local pool default low-ip-address  {high-ip-address }
ip nat [inside|outside|pool]
ip nat pool ]
ip nat [inside|outside] [destination|source]
ip nat [inside|outside] destination static  [ [tcp|udp]] 
[( {})]
ip nat [inside|outside] source [list|static]
ip nat [inside|outside] source static  
ip nat [insdie|outside] source list  interface [|
vlan ] [(address |interface |overload|
pool )]
ip route
    Add page 587 to Favourites
    image text
    Enable zoom 
    							PROFILES 7 - 61
Parameters
• ip [default-gateway |dns-server-forward|domain-lookup|
domain-name |name-server |routing]
• ip dhcp client [hostname|persistent-lease]
• ip local pool default low-ip-address  {high-ip-address IP}
• ip nat pool 
default-gateway  Configures the IP address of the default gateway (next-hop router)
  – Specify the default gateway’s IP address.
dns-server-forward Enables DNS forwarding. This command enables the forwarding of DNS queries to DNS 
servers outside of the network.
domain-lookup Enables domain lookup
domain-name 
Configures a default domain name
  – Specify a name for the DNS.
name-server  Configures IP address of the name server
  – Specify the IP address of the name server.
routing Enables IP routing of logically addressed packets from their source to their destination
dhcp Configures Dynamic Host Control Protocol (DHCP) client and host
client
 [hostname|persistent-lease]Sets the DHCP client
 hostname – Includes the hostname in the DHCP request
 persistent-lease – Retains the last lease across reboot if the DHCP server is 
unreachable
local Sets a local IP address range assigned to VPN clients using mode-config or IPSec with 
layer 2 TP
pool Specifies the address range to configure
default Sets the default tag
low-ip-address  Sets the lower limit of the IP address range
high-ip-address  Optional. Sets the upper limit of the IP address range
nat Configures Network Address Translation (NAT) parameters
pool  Configures a pool of IP addresses for NAT
  – Specify a name for the NAT pool.
    Add page 588 to Favourites
    image text
    Enable zoom 
    							7 - 62 WiNG CLI Reference Guide
• ip nat [inside|outside] destination static  [ [tcp|udp]] 
[( {})]]
• ip nat [inside|outside] source static  
• ip nat [inside|outside] source list  interface [|
vlan ] [(address |interface |overload|pool )]
nat Configures NAT parameters
[inside|outside] Configures inside and outside address translation for the destination
 inside – Configures inside address translation
 outside – Configures outside address translation
destination static The following are common to the inside and outside parameters:
 destination – Specifies destination address translation parameters
 static – Specifies static NAT local to global mapping
  – Specify the actual outside IP address to map.
 [tcp|udp]  – Configures the actual outside port. Specify a value from 1 - 65535.
 tcp – Configures Transmission Control Protocol (TCP) port
 udp – Configures User Datagram Protocol (UDP) port
  Enables configuration of the outside natted IP address
  – Specify the outside natted IP address.
  – Optional. Configures the outside natted port. Specify a value 
from 1 - 65535.
nat Configures NAT parameters
[inside|outside] Configures inside and outside address translation for the source
 inside – Configures inside address translation
 outside – Configures outside address translation
source static 
 The following are common to the inside and outside parameters:
 source – Specifies source address translation parameters
 static – Specifies static NAT local to global mapping
  – Specify the actual inside IP address to map.
  – Specify the natted IP address to map.
nat Configures NAT parameters
[inside|outside] Configures inside and outside IP access list
source list 
Configures an access list describing local addresses
  – Specify a name for the IP access list.
interface 
[|vlan  interface – Selects an interface to configure. Select a layer 3 router interface or a 
VLAN interface.
  – Selects a layer 3 interface. Specify the layer 3 router 
interface name.
 vlan – Selects a VLAN interface
  – Set the SVI VLAN ID of the interface.
    Add page 589 to Favourites
    image text
    Enable zoom 
    							PROFILES 7 - 63
• ip route  ]
Examples
rfs7000-37FABE(config-profile-default-RFS7000)#ip default-gateway 172.16.10.9
rfs7000-37FABE(config-profile-default-RFS7000)#
rfs7000-37FABE(config-profile-default-RFS7000)#ip dns-server-forward
rfs7000-37FABE(config-profile-default-RFS7000)#
rfs7000-37FABE(config-profile-default-RFS7000)#ip route 172.16.10.10/24 172.16.10.2
rfs7000-37FABE(config-profile-default-RFS7000)#
rfs7000-37FABE(config-profile-default-RFS7000)#ip local pool default low-ip-address 
1.2.3.4 high-ip-address 6.7.8.9
rfs7000-37FABE(config-profile-default-RFS7000)#
rfs7000-37FABE(config-profile-default-RFS7000)#ip nat inside source list test 
interface vlan 1 pool pool1 overload
rfs7000-37FABE(config-profile-default-RFS7000)#
rfs7000-37FABEconfig-profile-default-RFS7000)#ip nat pool pool1 prefix-length 9
rfs7000-37FABE(config-profile-default-RFS7000-nat-pool-pool1)#
rfs7000-37FABE(config-profile-default-RFS7000-nat-pool-pool1)#?
Nat Policy Mode commands:
  address  Specify addresses for the nat pool
  no       Negate a command or set its defaults
  clrscr   Clears the display screen
  commit   Commit all changes made in this session
  do       Run commands from Exec mode
  end      End current mode and change to EXEC mode
  exit     End current mode and down to previous mode
  help     Description of the interactive help system
  revert   Revert changes
  service  Service Commands
  show     Show running system information
  write    Write running configuration to memory or terminal
rfs7000-37FABE(config-profile-default-RFS7000-nat-pool-pool1)
Related Commands
address  The following is a recursive parameter and common to both the layer 3 and VLAN 
interfaces:
 Configures the interface IP address used with NAT
interface  The following is a recursive parameter and common to both the layer 3 and VLAN 
interfaces:
 Configures a wireless controller VLAN interface
  – Specify the SVI VLAN ID of the interface.
overload Enables use of global address for many local addresses
pool  Specifies the NAT pool
  – Specify the NAT pool name.
route Configures static routes
 Specify the IP destination prefix in the A.B.C.D/M format.
 Specify the IP address of the gateway.
noDisables or reverts settings to their default
    Add page 590 to Favourites
    image text
    Enable zoom 
    							7 - 64 WiNG CLI Reference Guide
7.1.21 nat-pool 
Creating Profiles
Use the (config-profile-default-RFS7000) instance to configure Network Address Translation (NAT) pool commands.
rfs7000-37FABEconfig-profile-default-RFS7000)#ip nat pool pool1 prefix-length 
rfs7000-37FABE(config-profile-default-RFS7000-nat-pool-pool1)#ip nat pool pool1 
prefix-length 1
rfs7000-37FABE(config-profile-default-RFS7000-nat-pool-pool1)#?
Nat Policy Mode commands:
  address  Specify addresses for the nat pool
  no       Negate a command or set its defaults
  clrscr   Clears the display screen
  commit   Commit all changes made in this session
  do       Run commands from Exec mode
  end      End current mode and change to EXEC mode
  exit     End current mode and down to previous mode
  help     Description of the interactive help system
  revert   Revert changes
  service  Service Commands
  show     Show running system information
  write    Write running configuration to memory or terminal
rfs7000-37FABE(config-profile-default-RFS7000-nat-pool-pool1)
Table 7.5 summarizes NAT pool commands
Table 7.5NAT Pool Commands
Command Description Reference
addressSpecifies addresses for the NAT poolpage 7-65
noNegates a command or sets its defaultpage 7-66
clrscrClears the display screenpage 5-3
commitCommits (saves) changes made in the current sessionpage 5-4
doRuns commands from EXEC modepage 4-66
endEnds and exits the current mode and moves to the PRIV EXEC modepage 5-5
exitEnds the current mode and moves to the previous modepage 5-6
helpDisplays the interactive help systempage 5-7
revertReverts changes to their last saved configurationpage 5-13
serviceInvokes service commands to troubleshoot or debug 
(config-if) 
instance configurationspage 5-14
showDisplays running system informationpage 6-4
writeWrites information to memory or terminalpage 5-42
    All Motorola manuals Comments (0)