Home > Motorola > Wireless > Motorola Wing 5 Manual

Motorola Wing 5 Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Motorola Wing 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1128
    Add page 1031 to Favourites
    image text
    Enable zoom 
    							WIPS-POLICY 22 - 27
22.1.6.2.10 threshold-radio
signature
Configures the radio threshold limit. When the radio exceeds the specified limit, an event is triggered.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
threshold-radio ]
Parameters
• threshold-radio 
Examples
rfs7000-37FABE(config-test-signature-test)#threshold-radio 88
rfs7000-37FABE(config-test-signature-test)#
rfs7000-37FABE(config-test-signature-test)#show context
 signature symbol
  bssid 11-22-33-44-55-66
  src-mac 00-1E-E5-EA-1D-60
  dst-mac 55-66-77-88-99-00
  frame-type beacon
  ssid-match ssid PrinterLan
  filter-ageout 8
  threshold-client 88
  threshold-radio 88
  payload 1 pattern motorola offset 1
rfs7000-37FABE(config-test-signature-test)#
Related Commands
threshold-radio 
Configures the radio threshold limit
  – Specify the threshold limit for a 60 second window from 1 - 65535
noResets the radio threshold limit
    Add page 1032 to Favourites
    image text
    Enable zoom 
    							22 - 28 WiNG CLI Reference Guide
22.1.6.2.11 no
signature mode commands
Negates a command or resets settings to their default. When used in the config WIPS policy signature mode, the no 
command resets or removes WIPS signature settings.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
no [bssid|dst-mac|filter-ageout|frame-type|mode|payload|src-mac|ssid-match|
threshold-client|threshold-radio]
no [bssid|dts-mac|filter-ageout|frame-type|mode enbale|payload |src-mac|
ssid-match [ssid|ssid-len]|threshold-client|threshold-radio]
Parameters
• no [bssid|dst-mac|filter-ageout|frame-type|mode enbale|payload |src-mac|
ssid-match [ssid|ssid-len]|threshold-client|threshold-radio]
no bssid Resets a WIPS signature BSSID
no dst-mac Resets a WIPS signature destination MAC address
no filter-ageout Resets the filter ageout interval. This is the duration a client, triggering a WIPS event, 
is excluded from RF Domain manager radio association.
no frame-type Resets a WIPS signature frame type
no mode enable Disables a WIPS signature
 enable – Changes the mode from enabled to disabled
no payload  Resets payload settings. The payload command sets a numerical index pattern and 
offset for this WIPS signature
  – Sets the payload index
no src-mac Resets a WIPS signature source MAC address
no ssid-match [ssid|ssid-len] Resets the SSID character length
 ssid – Removes the specified SSID match string
 ssid-len – Removes the specified character length of the SSID
    Add page 1033 to Favourites
    image text
    Enable zoom 
    							WIPS-POLICY 22 - 29
Usage Guidelines
The no command negates any command associated with it. Wherever required, use the same parameters associated with 
the command getting negated.
Examples
The following is the WIPS signature before the execution of the no command:
rfs7000-37FABE(config-test-signature-test)#show context
 signature symbol
  bssid 11-22-33-44-55-66
  src-mac 00-1E-E5-EA-1D-60
  dst-mac 55-66-77-88-99-00
  frame-type beacon
  ssid-match ssid PrinterLan
  filter-ageout 8
  threshold-client 88
  threshold-radio 88
  payload 1 pattern motorola offset 1
rfs7000-37FABE(config-test-signature-test)#
The following is the WIPS signature after the execution of the no command:
rfs7000-37FABE(config-test-signature-test)#no mode enable
rfs7000-37FABE(config-test-signature-test)#
rfs7000-37FABE(config-test-signature-test)#no bssid
rfs7000-37FABE(config-test-signature-test)#
rfs7000-37FABE(config-test-signature-test)#no dst-mac
rfs7000-37FABE(config-test-signature-test)#
rfs7000-37FABE(config-test-signature-test)#no src-mac
rfs7000-37FABE(config-test-signature-test)#
rfs7000-37FABE(config-test-signature-test)#no filter-ageout
rfs7000-37FABE(config-test-signature-test)#
rfs7000-37FABE(config-test-signature-test)#no threshold-client
rfs7000-37FABE(config-test-signature-test)#
rfs7000-37FABE(config-test-signature-test)#no threshold-radio
rfs7000-37FABE(config-test-signature-test)#
rfs7000-37FABE(config-test-signature-test)#show context
 signature symbol
  no mode enable
  frame-type beacon
  payload 1 pattern motorola offset 1
rfs7000-37FABE(config-test-signature-test)#
no threshold-client Resets a wireless client threshold limit. When the wireless client exceeds the specified 
limit, an event is triggered.
no threshold-radio Resets a radio threshold limit. When the radio exceeds the specified threshold limit, an 
event is triggered.
    Add page 1034 to Favourites
    image text
    Enable zoom 
    							22 - 30 WiNG CLI Reference Guide
Related Commands
bssidConfigures a WIPS signature BSSID MAC address
dst-macConfigures a destination MAC address for the packet examined for matching
filter-ageoutConfigures the filter ageout interval
frame-typeConfigures the frame type to match with a signature
modeEnables or disables a WIPS signature
payloadConfigures payload settings. The payload command sets a numerical index pattern and 
offset for this WIPS signature.
src-macConfigures a source MAC address for the packet examined for matching
ssid-matchConfigures a SSID for matching
threshold-clientConfigures a wireless client threshold limit
threshold-radioConfigures a radio threshold limit
    Add page 1035 to Favourites
    image text
    Enable zoom 
    							WIPS-POLICY 22 - 31
22.1.7 use
wips-policy
Enables device categorization on this WIPS policy. This command uses an existing device categorization list, or creates a 
new device categorization list. The list categorizes devices as authorized or unauthorized.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
use device-categorization 
Parameters
• use device-categorization 
Examples
rfs7000-37FABE(config-wips-policy-test)#use device-categorization test
rfs7000-37FABE(config-wips-policy-test)#
rfs7000-37FABE(config-wips-policy-test)#show context
wips-policy test
 no enable
 signature symbol
 use device-categorization test
rfs7000-37FABE(config-wips-policy-test)#
Related Commands
device-categorization 
Configures a device categorization list
  – Specify the device categorization object name to 
associate with this profile
noDisables the use of a device categorization policy with a WIPS policy
    Add page 1036 to Favourites
    image text
    Enable zoom 
    							22 - 32 WiNG CLI Reference Guide
    Add page 1037 to Favourites
    image text
    Enable zoom 
    							CHAPTER 23 WLAN-QOS-POLICY
This chapter summarizes the WLAN QoS policy in detail.
A WLAN QoS policy increases network efficiency by prioritizing data traffic. Prioritization reduces congestion. This is 
essential because of the lack of bandwidth for all users and applications. QoS ensures WLANs get a share of the 
bandwidth equally or per the configured proportion.
Each WLAN QoS policy has a set of parameters which it groups into categories, such as management, voice and data. 
Packets within each category are processed based on the weights defined for each WLAN.
Use the (config) instance to configure WLAN QoS policy commands. To navigate to the WLAN QoS policy instance, use the 
following commands:
rfs7000-37FABE(config)#wlan-qos-policy 
rfs7000-37FABE(config)#wlan-qos-policy test
rfs7000-37FABE(config-wlan-qos-test)#?
WLAN QoS Mode commands:
  accelerated-multicast  Configure accelerated multicast streams address and
                         forwarding QoS classification
  classification         Select how traffic on this WLAN must be classified
                         (relative prioritization on the radio)
  multicast-mask         Egress multicast mask (frames that match bypass the
                         PSPqueue. This permits intercom mode operation
                         without delay even in the presence of PSP clients)
  no                     Negate a command or set its defaults
  qos                    Quality of service
  rate-limit             Configure traffic rate-limiting parameters on a
                         per-wlan/per-client basis
  svp-prioritization     Enable spectralink voice protocol support on this
                         wlan
  voice-prioritization   Prioritize voice client over other client (for
                         non-WMM clients)
  wmm                    Configure 802.11e/Wireless MultiMedia parameters
  clrscr                 Clears the display screen
  commit                 Commit all changes made in this session
  do                     Run commands from Exec mode
  end                    End current mode and change to EXEC mode
  exit                   End current mode and down to previous mode
  help                   Description of the interactive help system
  revert                 Revert changes
  service                Service Commands
  show                   Show running system information
  write                  Write running configuration to memory or terminal
rfs7000-37FABE(config-wlan-qos-test)#
    Add page 1038 to Favourites
    image text
    Enable zoom 
    							23 - 2 WiNG CLI Reference Guide
23.1 wlan-qos-policy
WLAN-QOS-POLICY
Table 23.1 summarizes WLAN QoS policy commands
Table 23.1wlan-qos-policy Commands
Command Description Reference
accelerated-
multicastConfigures accelerated multicast stream addresses and forwards QoS 
classificationspage 23-3
classificationClassifies WLAN traffic based on prioritypage 23-5
multicast-maskConfigures the egress prioritization multicast maskpage 23-7
noNegates a command or sets its defaultpage 23-8
qosDefines the QoS configurationpage 23-11
rate-limitConfigures the WLAN traffic rate limit using a WLAN QoS policypage 23-12
svp-prioritizationEnables Spectralink voice protocol support on a WLANpage 23-14
voice-prioritizationPrioritizes voice client over other clientspage 23-15
wmmConfigures 802.11e/wireless multimedia parameterspage 23-16
clrscrClears the display screenpage 5-3
commitCommits (saves) changes made in the current sessionpage 5-4
doRuns commands from EXEC modepage 4-66
endEnds and exits the current mode and moves to the PRIV EXEC modepage 5-5
exitEnds the current mode and moves to the previous modepage 5-6
helpDisplays the interactive help systempage 5-7
revertReverts changes to their last saved configurationpage 5-13
serviceInvokes service commands to troubleshoot or debug 
(config-if) 
instance configurationspage 5-14
showDisplays running system informationpage 6-4
writeWrites the system running configuration to memory or terminalpage 5-42
    Add page 1039 to Favourites
    image text
    Enable zoom 
    							WLAN-QOS-POLICY 23 - 3
23.1.1 accelerated-multicast
wlan-qos-policy
Configures the accelerated multicast stream address and forwarding QoS classification
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
accelerated-multicast [|autodetect]
accelerated-multicast [|autodetect] {classification [background|
best-effort|trust|video|voice]}
Parameters
• accelerated-multicast [|autodetect] {classification [background|
best-effort|trust|video|voice]}
accelerated-multicast Configures the accelerated multicast stream address and forwarding QoS classification
 Configures a multicast IP address in the A.B.C.D format. The system can configure up 
to 32 IP addresses for each WLAN QoS policy
autodetect Allows the system to automatically detect multicast streams. This parameter allows 
the system to convert multicast streams to unicast, or to specify multicast streams 
converted to unicast.
classification Optional. Configures the forwarding QoS classification (traffic class). When the stream 
is converted and queued for transmission, specify the type of classification applied to 
the stream.
background Forwards streams with background (low) priority. This parameter is common to both 
 and autodetect.
best-effort Forwards streams with best effort (normal) priority. This parameter is common to both 
 and autodetect.
trust No change to the streams forwarding traffic class. This parameter is common to both 
 and autodetect.
    Add page 1040 to Favourites
    image text
    Enable zoom 
    							23 - 4 WiNG CLI Reference Guide
Examples
rfs7000-37FABE(config-wlan-qos-test)#accelerated-multicast autodetect classification 
voice
rfs7000-37FABE(config-wlan-qos-test)#
rfs7000-37FABE(config-wlan-qos-test)#show context
wlan-qos-policy test
 qos trust dscp
 qos trust wmm
 accelerated-multicast autodetect classification voice
rfs7000-37FABE(config-wlan-qos-test)#
video Forwards streams with video traffic priority. This parameter is common to both  and 
autodetect.
voice Forwards streams with voice traffic priority. This parameter is common to both  and 
autodetect.
    All Motorola manuals Comments (0)