Motorola Wing 5 Manual
Have a look at the manual Motorola Wing 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 466
6 - 38 WiNG CLI Reference Guide
6.1.19 file
show commands
Displays file system information
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
show file [information |systems]
Parameters
• show file [information |systems]
Examples
rfs7000-37FABE(config)#show file systems
File Systems:
Size(b) Free(b) Type Prefix
- - opaque system:
10485760 9916416 flash nvram:...](http://img.usermanuals.tech/thumb/52/100713/w64_wing-5-manual-1509563222_d-465.png "Page 466
6 - 38 WiNG CLI Reference Guide
6.1.19 file
show commands
Displays file system information
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
show file [information |systems]
Parameters
• show file [information |systems]
Examples
rfs7000-37FABE(config)#show file systems
File Systems:
Size(b) Free(b) Type Prefix
- - opaque system:
10485760 9916416 flash nvram:...")
![Page 467
SHOW COMMANDS 6 - 39
6.1.20 firewall
show commands
Displays wireless firewall information, such as DHCP snoop table entries, denial of service statistics, active session
summaries etc.
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
show firewall [dhcp|dos|flows]
show firewall [dhcp snoop-table|dos stats] {on }]
show firewall flows {[filter|management|on|stats|wireless-client ]}
show firewall flows {filter...](http://img.usermanuals.tech/thumb/52/100713/w64_wing-5-manual-1509563222_d-466.png "Page 467
SHOW COMMANDS 6 - 39
6.1.20 firewall
show commands
Displays wireless firewall information, such as DHCP snoop table entries, denial of service statistics, active session
summaries etc.
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
show firewall [dhcp|dos|flows]
show firewall [dhcp snoop-table|dos stats] {on }]
show firewall flows {[filter|management|on|stats|wireless-client ]}
show firewall flows {filter...")
![Page 468
6 - 40 WiNG CLI Reference Guide
• show firewall flows {management {on }|stats {on }|wireless-client |on }
• show firewall flows filter [(dir|dst|ether|flow-type|icmp|igmp|ip|
max-idle|min-bytes|min-idle|min-pkts|not|port|src|tcp|udp)] {(dir|dst|ether|
flow-type|ip|max-idle|min-bytes|min-idle|min-pkts|port|src)}
firewall flows Notifies a session has been established
management
{on }Optional. Displays management traffic firewall flows
on – Optional. Displays firewall flows on a specified device
–...](http://img.usermanuals.tech/thumb/52/100713/w64_wing-5-manual-1509563222_d-467.png "Page 468
6 - 40 WiNG CLI Reference Guide
• show firewall flows {management {on }|stats {on }|wireless-client |on }
• show firewall flows filter [(dir|dst|ether|flow-type|icmp|igmp|ip|
max-idle|min-bytes|min-idle|min-pkts|not|port|src|tcp|udp)] {(dir|dst|ether|
flow-type|ip|max-idle|min-bytes|min-idle|min-pkts|port|src)}
firewall flows Notifies a session has been established
management
{on }Optional. Displays management traffic firewall flows
on – Optional. Displays firewall flows on a specified device
–...")
![Page 469
SHOW COMMANDS 6 - 41
icmp {code|type} Matches flows with the specified Internet Control Message Protocol (ICMP) code and
type
code – Matches flows with the specified ICMP code
type – Matches flows with the specified ICMP type
igmp Matches Internet Group Management Protocol (IGMP) flows
ip [dst |host
|proto |
src ] Filters firewall flows based on the IPv4 parameters passed
dst – Matches destination IP address
host – Matches flows containing IPv4 address
proto – Matches the IPv4 protocol
src –...](http://img.usermanuals.tech/thumb/52/100713/w64_wing-5-manual-1509563222_d-468.png "Page 469
SHOW COMMANDS 6 - 41
icmp {code|type} Matches flows with the specified Internet Control Message Protocol (ICMP) code and
type
code – Matches flows with the specified ICMP code
type – Matches flows with the specified ICMP type
igmp Matches Internet Group Management Protocol (IGMP) flows
ip [dst |host
|proto |
src ] Filters firewall flows based on the IPv4 parameters passed
dst – Matches destination IP address
host – Matches flows containing IPv4 address
proto – Matches the IPv4 protocol
src –...")
![Page 474
6 - 46 WiNG CLI Reference Guide
6.1.22 ip
show commands
Displays IP related information
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
show ip [arp|ddns|dhcp|dhcp-vendor-options|domain-name|igmp|interface|
name-server|nat|route|routing]
show ip arp { {on }|on }
show ip ddns bindings {on }
show ip dhcp [binding|networks|status]
show ip dhcp [networks|status] {on }]
show ip dhcp binding {manual |on }
show ip...](http://img.usermanuals.tech/thumb/52/100713/w64_wing-5-manual-1509563222_d-473.png "Page 474
6 - 46 WiNG CLI Reference Guide
6.1.22 ip
show commands
Displays IP related information
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
show ip [arp|ddns|dhcp|dhcp-vendor-options|domain-name|igmp|interface|
name-server|nat|route|routing]
show ip arp { {on }|on }
show ip ddns bindings {on }
show ip dhcp [binding|networks|status]
show ip dhcp [networks|status] {on }]
show ip dhcp binding {manual |on }
show ip...")
![Page 475
SHOW COMMANDS 6 - 47
• show ip ddns bindings {on }
• show ip dhcp [networks|status] {on }
• show ip dhcp binding {manual {on }|on }
• show ip [dhcp-vendor-options|domain-name|name-server|routing] {on }
{on }Optional. Displays ARP configuration on a specified VLAN. Specify the VLAN name.
on – Optional. Displays VLAN ARP configuration on a specified
device
– Specify the name of the AP or wireless controller.
on Optional. Displays VLAN ARP configuration details on a specified device
– Specify the...](http://img.usermanuals.tech/thumb/52/100713/w64_wing-5-manual-1509563222_d-474.png "Page 475
SHOW COMMANDS 6 - 47
• show ip ddns bindings {on }
• show ip dhcp [networks|status] {on }
• show ip dhcp binding {manual {on }|on }
• show ip [dhcp-vendor-options|domain-name|name-server|routing] {on }
{on }Optional. Displays ARP configuration on a specified VLAN. Specify the VLAN name.
on – Optional. Displays VLAN ARP configuration on a specified
device
– Specify the name of the AP or wireless controller.
on Optional. Displays VLAN ARP configuration details on a specified device
– Specify the...")
SHOW COMMANDS 6 - 43
6.1.21 interface
show commands
Displays wireless controller interface status
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
show interfaces {|brief|counters|ge |me1|on|
port-channel {|switchport|vlan } {on }
Parameters
• show interfaces {|brief|counters|ge |me1|on|
port-cahnnel |switchport|vlan } {on }
interfaces Displays wireless controller interface status based on the parameters passed
{on }Displays status of the interface specified by the parameter. Specify the
interface name.
on – Optional. Displays interface status on a specified device
– Specify the name of the AP or wireless controller.
brief
{on }Displays a brief summary of the interface status and configuration
on – Optional. Displays a brief summary on a specified device
– Specify the name of the AP or wireless controller.
counters
{on }Displays interface Tx or Rx counters
on – Optional. Displays interface Tx or Rx counters on a specified
device
– Specify the name of the AP or wireless controller.
ge Displays Gigabit Ethernet interface status and configuration
– Select the Gigabit Ethernet interface index from 1 - 4.
me1
{on }Displays Fast Ethernet interface status and configuration
on – Optional. Displays Fast Ethernet interface status on a specified
device
– Specify the name of the AP or wireless controller.
6 - 44 WiNG CLI Reference Guide
Examples
rfs7000-37FABE(config)#show interface switchport on rfs7000-37FABEE
--------------------------------------------------------------------------
INTERFACE STATUS MODE VLAN(S)
--------------------------------------------------------------------------
ge1 UP access 1
ge2 DOWN access 1
ge3 UP access 1
ge4 DOWN access 1
--------------------------------------------------------------------------
A * next to the VLAN ID indicates the native vlan for that trunk port
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show interface vlan 1
Interface vlan1 is UP
Hardware-type: vlan, Mode: Layer 3, Address: 00-15-70-37-FA-BE
Index: 4, Metric: 1, MTU: 1500
IP-Address: 172.16.10.1/24
input packets 587971, bytes 58545041, dropped 0, multicast packets 0
input errors 0, length 0, overrun 0, CRC 0, frame 0, fifo 0, missed 0
output packets 56223, bytes 4995566, dropped 0
output errors 0, aborted 0, carrier 0, fifo 0, heartbeat 0, window 0
collisions 0
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show interface ge 2 on rfs7000-37FABE
Interface ge2 is DOWN
Hardware-type: ethernet, Mode: Layer 2, Address: 00-15-70-37-FA-C0
Index: 2002, Metric: 1, MTU: 1500
Speed: Admin Auto, Operational n/a, Maximum 1G
Duplex: Admin Auto, Operational n/a
Active-medium: n/a
Switchport settings: access, access-vlan: 1
Input packets 0, bytes 0, dropped 0
Received 0 unicasts, 0 broadcasts, 0 multicasts
Input errors 0, runts 0, giants 0
CRC 0, frame 0, fragment 0, jabber 0
Output packets 501587, bytes 60935912, dropped 0
Sent 3 unicasts, 4613 broadcasts, 496971 multicasts
Output errors 0, collisions 0, late collisions 0
Excessive collisions 0
rfs7000-37FABE(config)#
on Displays interface status on a specified device
– Specify the name of the AP or wireless controller.
port-channel Displays port channel interface status and configuration
– Specify the port channel index from 1 - 2.
switch port
{on }Displays layer 2 interface status
on – Optional. Displays interface status on a specified device
– Specify the name of the AP or wireless controller.
vlan
{on }Displays VLAN interface status and configuration
– Specify the Switch Virtual Interface (SVI) VLAN ID from 1 - 4094.
on – Optional. Displays interface status on a specified device
– Specify the name of the AP or wireless controller.
SHOW COMMANDS 6 - 45
rfs7000-37FABE(config)#show interface counters
--------------------------------------------------------------------------
# MAC RX-PKTS RX-BYTES RX-DROP TX-PKTS TX-
BYTES TX-DROP
--------------------------------------------------------------------------
me1 00-...-F7 0 0 0 0 0 0
vlan1 00-...-BE 588384 58580154 0 56435 5013682 0
ge1 00-...-BF 1906950 175560930 0 1402226 589235764 0
ge2 00-...-C0 0 0 0 501615 60939303 0
ge3 00-...-C1 1354163 581149840 0 1877890 175646105 0
ge4 00-...-C2 0 0 0 501615 60939303 0
--------------------------------------------------------------------------
rfs7000-37FABE(config)#
6 - 46 WiNG CLI Reference Guide
6.1.22 ip
show commands
Displays IP related information
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
show ip [arp|ddns|dhcp|dhcp-vendor-options|domain-name|igmp|interface|
name-server|nat|route|routing]
show ip arp { {on }|on }
show ip ddns bindings {on }
show ip dhcp [binding|networks|status]
show ip dhcp [networks|status] {on }]
show ip dhcp binding {manual |on }
show ip [dhcp-vendor-options|domain-name|name-server|routing] {on }
show ip igmp snooping [mrouter|vlan]
show ip igmp snooping mrouter vlan {on }
show ip igmp snooping vlan { {on }|
on }
show ip interface { {on }|brief {on }|
on }
show ip nat translations verbose {on }
show ip route {|ge |me1|port-channel |vlan }
{on }
show ip route {on }
Parameters
• show ip arp { {on }|on }
ip arp Displays Address Resolution Protocol (ARP) configuration details
SHOW COMMANDS 6 - 47
• show ip ddns bindings {on }
• show ip dhcp [networks|status] {on }
• show ip dhcp binding {manual {on }|on }
• show ip [dhcp-vendor-options|domain-name|name-server|routing] {on }
{on }Optional. Displays ARP configuration on a specified VLAN. Specify the VLAN name.
on – Optional. Displays VLAN ARP configuration on a specified
device
– Specify the name of the AP or wireless controller.
on Optional. Displays VLAN ARP configuration details on a specified device
– Specify the name of the AP or wireless controller.
ip ddns Displays Dynamic Domain Name Server (DDNS) configuration details
bindings
{on }Displays DDNS address bindings
on – Optional. Displays address bindings on a specified device
– Specify the name of the AP or wireless controller.
ip dhcp Displays the DHCP server configuration details
networks
{on }Displays the DHCP server network details
on – Optional. Displays server network details on a specified device
– Specify the name of the AP or wireless controller.
status {on }Displays the DHCP server status
on – Optional. Displays server status on a specified device
– Specify the name of the AP or wireless controller.
ip dhcp Displays the DHCP server configuration details
bindings Displays DHCP address bindings
manual {on }Displays static DHCP address bindings
on – Optional. Displays address bindings on a specified device
– Specify the name of the AP or wireless controller.
on Displays DHCP address bindings on a specified device
– Optional. Specify the name of the AP or wireless controller.
ip dhcp-vendor-options
{on }Displays DHCP 43 parameters received from the DHCP server
on – Optional. Displays DHCP 43 parameters received from a
specified device
– Specify the name of the AP or wireless controller.
ip domain-name
{on }Displays DNS default domain
on – Optional. Displays the default domain on a specified device
– Specify the name of the AP or wireless controller.
6 - 48 WiNG CLI Reference Guide
• show ip igmp snooping mrouter vlan {on }
• show ip igmp snooping vlan { {on }|on }
• show ip interface { {on }|brief {on }}
• show ip nat translations verbose {on }
ip name-server
{on }Display the DNS name server details
on – Optional. Displays server details on a specified device
– Specify the name of the AP or the wireless controller.
ip routing
{on }Displays the routing status
on – Optional. Displays routing details on a specified device
– Specify the name of the AP or wireless controller.
ip igmp Displays IGMP configuration details
snooping Displays IGMP snooping configuration details
mrouter vlan
{on }Displays VALN IGMP snooping mrouter configuration
– Specify the VLAN ID from 1 - 4095.
on – Optional. Displays details on a specified device
– Specify the name of the AP or wireless controller.
ip igmp Displays IGMP configuration details
snooping Displays IGMP snooping configuration details
vlan Displays VLAN IGMP snooping configuration
– Specify the VLAN ID from 1 - 4095.
{on } Optional. Specify the multicast group IP address.
on – Optional. Displays configuration details on a specified device
– Specify the name of the AP or wireless controller.
ip interface Displays administrative and operational status of all layer 3 interfaces or a specified
layer 3 interface
{on }Displays a specified interface status. Specify the interface name.
on – Optional. Displays interface status on a specified device
– Specify the name of the AP or wireless controller.
brief Displays a brief summary of interface status and configuration
on – Optional. Displays a brief summary on a specified device
– Specify the name of the AP or wireless controller.
ip nat translations Displays Network Address Translation (NAT) translations
verbose Displays detailed NAT translations
on – Optional.Displays NAT translations on a specified device
– Specify the name of the AP or wireless controller.
SHOW COMMANDS 6 - 49
• show ip route {|ge |me1|port-channel |vlan } {on
}
Examples
rfs7000-37FABE(config)#show ip arp test on rfs7000-37FABEE
+--------------------+-------------------------+---------------+----------
| IP | MAC | INTERFACE | TYPE |
+--------------------+-------------------------+---------------+----------
| 172.16.10.11 | 00-50-DA-95-11-13 | vlan1 | dynamic |
| 172.16.10.10 | 00-02-B3-28-D1-55 | vlan1 | dynamic |
+--------------------+-------------------------+---------------+----------
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show ip interface brief on rfs7000-37FABE
+-----------------+----------------------------+--------------+-----------
| INTERFACE | IP-ADDRESS/MASK | STATUS | PROTOCOL |
+-----------------+----------------------------+--------------+-----------
| me1 | unassigned | DOWN | down |
| vlan44 | unassigned | UP | up |
| vlan1 | 172.16.10.2/24 | UP | up |
| vlan4 | 157.235.208.252/24 | UP | up |
+-----------------+----------------------------+--------------+-----------
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show ip nat translations verbose on rfs7000-37FABE
PROTO ACTUAL SOURCE ACTUAL DESTINATION NATTED SOURCE NATTED DESTINATION
--------------------------------------------------------------------------
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show ip route test on rfs7000-37FABE
+-------------------------+--------------------+------------+-------------
| DESTINATION | GATEWAY | FLAGS | INTERFACE |
+-------------------------+--------------------+------------+-------------
| 157.235.208.0/24 | direct | C | vlan4 |
ip route Displays route table details
{on }Displays route table details for a specified interface
on – Optional. Displays route table details on a specified device
– Specify the name of the AP or wireless controller.
ge
{on }Displays GigabitEthernet interface route table details
– Specify the GigabitEthernet interface index from 1 - 4.
on – Optional. Displays route table details on a specified de-
vice
– Specify the name of the AP or wireless controller.
me1 {on } Displays FastEthernet interface route table details
on – Optional. Displays route table details on a specified device
– Specify the name of the AP or wireless controller.
port-channel
{on }Displays port channel interface route table details
on – Optional. Displays route table details on a specified device
– Specify the name of the AP or wireless controller.
vlan
{on }Displays VLAN interface route table details
on – Optional. Displays route table details on a specified device
– Specify the name of the AP or wireless controller.
6 - 50 WiNG CLI Reference Guide | 172.16.10.0/24 | direct | C | vlan1 | | default | 172.16.10.9 | CG | vlan1 | +-------------------------+--------------------+------------+------------- Flags: C - Connected G - Gateway rfs7000-37FABE(config)# rfs7000-37FABE(config)#show ip route pc 2 +-------------------------+--------------------+------------+------------- | DESTINATION | GATEWAY | FLAGS | INTERFACE | +-------------------------+--------------------+------------+------------- | 157.235.208.0/24 | direct | C | vlan4 | | 172.16.10.0/24 | direct | C | vlan1 | | default | 172.16.10.9 | CG | vlan1 | +-------------------------+--------------------+------------+------------- Flags: C - Connected G - Gateway rfs7000-37FABEconfig)# rfs7000-37FABE(config)#show ip route vlan 1 on rfs7000-37FABE +------------------------+---------------------+-------------+------------ | DESTINATION | GATEWAY | FLAGS | INTERFACE | +------------------------+---------------------+-------------+------------ | 172.16.10.0/24 | direct | C | vlan1 | | default | 172.16.10.9 | CG | vlan1 | +------------------------+---------------------+-------------+------------ Flags: C - Connected G - Gateway rfs7000-37FABE(config)# rfs7000-37FABE(config)#show ip route ge 1 on rfs7000-37FABE------------------------- ------------------------------------------------- DESTINATION GATEWAY FLAGS INTERFACE -------------------------------------------------------------------------- 172.16.12.0/24 direct C vlan3 172.16.11.0/24 direct C vlan2 172.16.10.0/24 direct C vlan1 -------------------------------------------------------------------------- Flags: C - Connected G - Gateway rfs7000-37FABE(config)# rfs7000-37FABE(config)#show ip routing on rfs7000-37FABE IP routing is enabled. rfs7000-37FABE(config)# rfs7000-37FABE(config)#show ip dhcp status on rfs7000-37FABE State of DHCP server: running Interfaces: vlan2, vlan3 rfs7000-37FABE(config)#
SHOW COMMANDS 6 - 51
6.1.23 ip-access-list-stats
show commands
Displays IP access list statistics
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
show ip-access-list-stats { {on }|on }
Parameters
• show ip-access-list-stats { {on }|
on }
Examples
rfs7000-37FABE(config)#show ip-access-list-stats
IP Access-list: # Restrict Management ACL #
permit tcp any any eq ftp rule-precedence 1 Hitcount: 0
permit tcp any any eq www rule-precedence 2 Hitcount: 41
permit tcp any any eq ssh rule-precedence 3 Hitcount: 448
permit tcp any any eq https rule-precedence 4 Hitcount: 0
permit udp any any eq snmp rule-precedence 5 Hitcount: 0
permit tcp any any eq telnet rule-precedence 6 Hitcount: 4
NOTE: This command is not available in the USER EXEC Mode
ip-access-list-stats Displays IP access list statistics
{on }Displays statistics for a specified IP access list
– Optional. Specify the IP access list name.
on – Optional. Displays statistics on a specified device
– Specify the name of the AP or wireless controller.
on Optional. Displays all IP access list statistics on a specified device
– Optional. Specify the name of the AP or wireless controller.
6 - 52 WiNG CLI Reference Guide
6.1.24 licenses
show commands
Displays installed licenses and usage information
Supported in the following platforms:
AP300
AP621
AP650
AP6511
AP6521
AP6532
AP71XX
RFS4000
RFS6000
RFS7000
NX9000
NX9500
Syntax
show licenses
Parameters
None
Examples
rfs7000-37FABE(config)#show licenses
Serial Number : 6268529900014
Device Licenses:
AP-LICENSE
String :
8088bb045018988b85bcd575d0ab7dbc802885bcc680a96194dfbeedc28d4117058eb53bd8b
Value : 50
Used : 0
AAP-LICENSE
String :
8088bb045018988bf98ff7127cda1d354bc689885fcc6b625b695384946d4117058eb53bd8b
Value : 50
Used : 0
rfs7000-37FABE(config)#