Home > Motorola > Wireless > Motorola Wing 5 Manual

Motorola Wing 5 Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Motorola Wing 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1128
    Add page 361 to Favourites
    image text
    Enable zoom 
    							GLOBAL CONFIGURATION COMMANDS 4 - 195
• kerberos server [primary|secondary] host  {port []}
• keberos server timeout 
Examples
rfs7000-37FABE(config-wlan-wlan1)#kerberos server timeout 12
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#kerberos server primary host 172.16.10.9 port
88
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#show context
wlan wlan1
 description testwlan
 ssid wlan1
 bridging-mode local
 encryption-type tkip-ccmp
 authentication-type eap
 802.11w sa-query timeout 110
 802.11w sa-query attempts 1
 kerberos server timeout 12
 kerberos server primary host 172.16.10.9
 accounting syslog host 172.16.10.12 port 2
 data-rates 2.4GHz gn
 client-load-balancing probe-req-intvl 5ghz 5
 client-load-balancing band-discovery-intvl 2
 captive-portal-enforcement fall-back
 ip dhcp trust
 acl exceed-rate wireless-client-denied-traffic 20 disassociate
 enforce-dhcp
 broadcast-dhcp validate-offer
rfs7000-37FABE(config-wlan-wlan1)#
kerberos Configures a WLAN’s Kerberos authentication parameters
The parameters are: password, realm, and server.
server 
[primary|secondary]Configures the primary and secondary KDC server parameters
 primary – Configures the primary KDC server parameters
 secondary – Configures the secondary KDC server parameters
host  Sets the primary or secondary KDC server address
  – Specify the IP address or name of the KDC server.
port  Optional. Configures the UDP port used to connect to the KDC server
  – Specify the port from 1 - 65535. The default is 88.
kerberos Configures a WLAN’s Kerberos authentication parameters
The parameters are: password, realm, and server.
timeout  Modifies the Kerberos KDC server‘s timeout parameters
  – Specifies the time the wireless controller waits for a response from the 
Kerberos KDC server before retrying. Specify a value from 1 - 60 seconds.
    Add page 362 to Favourites
    image text
    Enable zoom 
    							4 - 196 WiNG CLI Reference Guide
4.1.47.2.19 motorola-extensions
wlan-mode commands
Enables support for Motorola Solutions specific extensions to 802.11
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
motorola-extensions [move-command|smart-scan|symbol-load-information| 
wmm-load-information]
Parameters
• otorola-extensions [move-command|smart-scan|symbol-load-information|
wmm-load-information]
motorola-extensions Enables support for Motorola Solutions specific extensions to 802.11
move-command Enables support for Motorola move (fast roaming) feature
smart-scan Enables support for smart scanning feature
symbol-load-information Enables support for the Symbol Technologies load information element (Element ID 173)
wmm-load-information Enables support for the Motorola Solutions WMM load information element
    Add page 363 to Favourites
    image text
    Enable zoom 
    							GLOBAL CONFIGURATION COMMANDS 4 - 197
Examples
rfs7000-37FABE(config-wlan-wlan1)#motorola-extensions wmm-load-information
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#show context
wlan wlan1
 description testwlan
 ssid wlan1
 bridging-mode local
 encryption-type tkip-ccmp
 authentication-type eap
 802.11w sa-query timeout 110
 802.11w sa-query attempts 1
 kerberos server timeout 12
 kerberos server primary host 172.16.10.9
 accounting syslog host 172.16.10.12 port 2
 data-rates 2.4GHz gn
 motorola-extensions wmm-load-information
 client-load-balancing probe-req-intvl 5ghz 5
 client-load-balancing band-discovery-intvl 2
 captive-portal-enforcement fall-back
 ip dhcp trust
 acl exceed-rate wireless-client-denied-traffic 20 disassociate
 enforce-dhcp
 broadcast-dhcp validate-offer
rfs7000-37FABE(config-wlan-wlan1)#
    Add page 364 to Favourites
    image text
    Enable zoom 
    							4 - 198 WiNG CLI Reference Guide
4.1.47.2.20 no
wlan-mode commands
Negates WLAN mode commands and reverts values to their default
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
no 
Parameters
None
Usage Guidelines
The no command negates any command associated with it. Wherever required, use the same parameters associated with 
the command getting negated.
Examples
rfs7000-37FABE(config-wlan-wlan1)#no ?
  802.11w                      Disable support for Protected Management Frames
                               (IEEE 802.11w)
  accounting                   Configure how accounting records are created
                               for this wlan
  acl                          Actions taken based on ACL configuration [
                               packet drop being one of them]
  answer-broadcast-probes      Do not Include this wlan when responding to
                               probe requests that do not specify an SSID
  authentication-type          Reset the authentication to use on this wlan to
                               default (none/Pre-shared keys)
  broadcast-dhcp               Configure broadcast DHCP packet handling
  broadcast-ssid               Do not advertise the SSID of the WLAN in
                               beacons
  captive-portal-enforcement   Configure how captive-portal is enforced on the
                               wlan
  client-access                Disallow client access on this wlan (no data
                               operations)
  client-client-communication  Disallow switching of frames from one wireless
                               client to another on this wlan
  client-load-balancing        Disable load-balancing of clients on this wlan
  data-rates                   Reset data rate configuration to default
  description                  Reset the description of the wlan
  encryption-type              Reset the encryption to use on this wlan to
                               default (none)
  enforce-dhcp                 Drop packets from Wireless Clients with static
                               IP address
    Add page 365 to Favourites
    image text
    Enable zoom 
    							GLOBAL CONFIGURATION COMMANDS 4 - 199
  ip                           Internet Protocol (IP)
  kerberos                     Configure kerberos authentication parameters
  motorola-extensions          Disable support for Motorola-Specific
                               extensions to 802.11
  proxy-arp-mode               Configure handling of ARP requests with
                               proxy-arp is enabled
  radius                       Configure RADIUS related parameters
  shutdown                     Enable the use of this wlan
  ssid                         Configure ssid
  use                          Set setting to use
  vlan                         Map the default vlan (vlan-id 1) to the wlan
  vlan-pool-member             Delete a mapped vlan from this wlan
  wep128                       Reset WEP128 parameters
  wep64                        Reset WEP64 parameters
  wireless-client              Configure wireless-client specific parameters
  wpa-wpa2                     Modify tkip-ccmp (wpa/wpa2) related parameters
  service                      Service Commands
rfs7000-37FABE(config-wlan-wlan1)#
The wlan1 settings before the execution of the no command:
rfs7000-37FABE(config-wlan-wlan1)#show context
wlan wlan1
 description testwlan
 ssid wlan1
 bridging-mode local
 encryption-type tkip-ccmp
 authentication-type eap
 802.11w sa-query timeout 110
 802.11w sa-query attempts 1
 kerberos server timeout 12
 kerberos server primary host 172.16.10.9
 accounting syslog host 172.16.10.12 port 2
 data-rates 2.4GHz gn
 motorola-extensions wmm-load-information
 client-load-balancing probe-req-intvl 5ghz 5
 client-load-balancing band-discovery-intvl 2
 captive-portal-enforcement fall-back
 ip dhcp trust
 acl exceed-rate wireless-client-denied-traffic 20 disassociate
 enforce-dhcp
 broadcast-dhcp validate-offer
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#no accounting syslog
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#no description
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#no authentication-type
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#no encryption-type
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#no enforce-dhcp
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#no kerberos server primary host
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#no kerberos server timeout
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#no data-rates 2.4GHz
rfs7000-37FABE(config-wlan-wlan1)#
    Add page 366 to Favourites
    image text
    Enable zoom 
    							4 - 200 WiNG CLI Reference Guide
The wlan1 settings after the execution of the no command:
rfs7000-37FABE(config-wlan-wlan1)#show context
wlan wlan1
 ssid wlan1
 bridging-mode local
 encryption-type none
 authentication-type none
 802.11w sa-query timeout 110
 802.11w sa-query attempts 1
 motorola-extensions wmm-load-information
 client-load-balancing probe-req-intvl 5ghz 5
 client-load-balancing band-discovery-intvl 2
 captive-portal-enforcement fall-back
 ip dhcp trust
 acl exceed-rate wireless-client-denied-traffic 20 disassociate
 broadcast-dhcp validate-offer
rfs7000-37FABE(config-wlan-wlan1)#
    Add page 367 to Favourites
    image text
    Enable zoom 
    							GLOBAL CONFIGURATION COMMANDS 4 - 201
4.1.47.2.21 proxy-arp-mode
wlan-mode commands
Enables proxy ARP mode for handling ARP requests
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
proxy-arp-mode [dynamic|strict]
Parameters
• proxy-arp-mode [dynamic|strict]
Examples
rfs7000-37FABE(config-wlan-wlan1)#proxy-arp-mode strict
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#show context
wlan wlan1
 ssid wlan1
 bridging-mode local
 encryption-type none
 authentication-type none
 802.11w sa-query timeout 110
 802.11w sa-query attempts 1
 motorola-extensions wmm-load-information
 client-load-balancing probe-req-intvl 5ghz 5
 client-load-balancing band-discovery-intvl 2
 captive-portal-enforcement fall-back
 ip dhcp trust
 acl exceed-rate wireless-client-denied-traffic 20 disassociate
 proxy-arp-mode strict
 broadcast-dhcp validate-offer
rfs7000-37FABE(config-wlan-wlan1)#
proxy-arp-mode Enables proxy ARP mode for handling ARP requests. The options available are dynamic 
and strict.
dynamic Forwards ARP requests to the wireless side (for which a response could not be proxied)
strict Does not forward ARP requests to the wireless side
    Add page 368 to Favourites
    image text
    Enable zoom 
    							4 - 202 WiNG CLI Reference Guide
4.1.47.2.22 radius
wlan-mode commands
Configures RADIUS related parameters
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
radius [dynamic-authorization|nas-identifier|nas-port-id|vlan-assignment]
radius [dynamic-authorization|nas-identifier |
nas-port-id |vlan-assignment]
Parameters
• radius [dynamic-authorization|nas-identifier |
nas-port-id |vlan-assignment]
Examples
rfs7000-37FABE(config-wlan-wlan1)#radius vlan-assignment
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#show context
wlan wlan1
 ssid wlan1
 bridging-mode local
 encryption-type none
 authentication-type none
 802.11w sa-query timeout 110
 802.11w sa-query attempts 1
 radius vlan-assignment
 motorola-extensions wmm-load-information
 client-load-balancing probe-req-intvl 5ghz 5
 client-load-balancing band-discovery-intvl 2
 proxy-arp-mode strict
dynamic-authorization Enables support for disconnect and change of authorization messages (RFC5176)
nas-identifier  Configures the WLAN NAS identifier sent to the RADIUS server. The NAS identifier 
should not exceed 256 characters.
nas-port-id 
Configures the WLAN NAS port ID sent to the RADIUS server. The NAS port identifier 
should not exceed 256 characters.
vlan-assignment Configures the VLAN assignment of a WLAN
    Add page 369 to Favourites
    image text
    Enable zoom 
    							GLOBAL CONFIGURATION COMMANDS 4 - 203
rfs7000-37FABE(config-wlan-wlan1)#
    Add page 370 to Favourites
    image text
    Enable zoom 
    							4 - 204 WiNG CLI Reference Guide
4.1.47.2.23 shutdown
wlan-mode commands
Shuts down a WLAN
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
shutdown
Parameters
None
Examples
rfs7000-37FABE(config-wlan-1)#shutdown
    All Motorola manuals Comments (0)