Motorola Wing 5 Manual
Have a look at the manual Motorola Wing 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
SHOW COMMANDS 6 - 33 6.1.15 debugging show commands Displays debugging information Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax show debugging {advanced-wips|captive-portal|cfgd|dhcpsvr|mint|mstp| nsm|on|radius|snmp|voice|vpn|wireless} show debugging {[advanced-wips|cfgd]} show debugging {[captive-portal|mint|mstp|nsm|voice|wireless]} {on } show debugging {on } show debugging {dhcpsvr|radius|snmp|vpn} {on } Parameters • show debugging {advanced-wips|cfgd} debugging {advanced-wips|cfgd}Displays debugging processes in progress based on the parameters passed advanced-wips – Optional. Displays the advanced WIPS module’s debugging configuration cfgd – Optional. Displays the cfgd process debugging configuration
6 - 34 WiNG CLI Reference Guide • show debugging {captive-portal|mint|mstp|nsm|voice|wireless} {on } • show debugging {dhcpsvr|radius|snmp|vpn} {on } • show debugging {on } Examples rfs7000-37FABE(config)#show debugging cfgd cfgd: config debugging is on cluster debugging is on rfs7000-37FABE(config)# debugging {captive-portal| mint|mstp|nsm|voice| wireless}Displays debugging processes in progress based on the parameters passed captive-portal – Optional. Displays the hotspot (HSD) module’s debugging configuration mint – Optional. Displays the MiNT module’s debugging configuration mstp – Optional. Displays the Multiple Spanning Tree (MST) module’s debugging configuration nsm – Optional. Displays Network Service Module (NSM) debugging configuration voice – Optional. Displays the voice module’s debugging configuration wireless – Optional. Displays the wireless module’s debugging configuration on The following are common to all of the above options: on – Optional. Displays debugging processes on a device or RF Domain. – The name of the AP, wireless controller, or RF Domain. debugging {dhcpsvr|radius|snmp| vpn}Displays debugging processes in progress based on the parameters passed dhcpsvr – Optional. Displays the DHCP server configuration module’s debugging information radius – Optional. Displays the RADIUS server configuration module’s debugging information snmp – Optional. Displays the Simple Network Management Protocol (SNMP) module’s debugging information vpn – Optional. Displays the VPN module’s debugging information snmp – Optional. Displays the SNMP module’s debugging information on The following are common to all of the above options: on – Optional. Displays debugging processes on a specified device – Specify the name of the AP or wireless controller. debugging {on }Displays all debugging processes in progress on a specified device or RF Domain. on – Optional. Displays debugging processes in progress, on a device or RF Domain – Specify the name of the AP, wireless controller, or RF Domain.
SHOW COMMANDS 6 - 35 6.1.16 device-categorization show commands Displays device categorization summary Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax show device-categorization summary Parameters • show device-categorization summary Examples rfs7000-37FABE(config)#show device-categorization summary -------------------------------------------------------------------------- POLICY # A/N AP/CLIENT MAC SSID -------------------------------------------------------------------------- DEVICE-CATEGORIZATION 1 sanctioned client 00-40-96-B0-BA-2D - DEVICE-CATEGORIZATION 2 neighboring client 00-40-96-B0-BA-2A - DEVICE-CATEGORIZATION 3 sanctioned ap 00-23-68-31-12-65 ASDF -------------------------------------------------------------------------- rfs7000-37FABE(config)# device-categorization summaryDisplays device categorization summary
6 - 36 WiNG CLI Reference Guide 6.1.17 event-history show commands Displays event history report Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax show event-history {on } Parameters • show event-history {on } Examples rfs7000-37FABE(config)#show event-history EVENT HISTORY REPORT Generated on 2011-06-22 12:50:10 IST by admin 2011-06-22 10:28:22 00-15-70-37-FA-BE SYSTEM LOGIN Successfully logged in User: admin with privilege superuser from ssh 2011-06-22 10:25:01 00-15-70-37-FA-BE SYSTEM LOGOUT Logged out User: admin with privilege superuser from 172.16.10.10 2011-06-22 09:39:35 00-15-70-37-FA-BE NSM IFUP Interface ge3 is up 2011-06-22 07:24:21 00-15-70-37-FA-BE SYSTEM LOGIN Successfully logged in User: admin with privilege superuser from ssh 2011-06-22 07:01:54 00-15-70-37-FA-BE NSM IFUP Interface ge3 is up 2011-06-22 07:01:53 00-15-70-37-FA-BE NSM IFUP Interface ge3 is up 2011-06-22 07:01:35 00-15-70-37-FA-BE NSM IFDOWN Interface ge3 is down 2011-06-22 07:01:18 00-15-70-37-FA-BE NSM IFUP Interface ge3 is up --More-- rfs7000-37FABE(config)# event-history Displays event history report on Optional. Displays event history report on a device or RF Domain – Specify the name of the AP, wireless controller, or RF Domain.
SHOW COMMANDS 6 - 37 6.1.18 event-system-policy show commands Displays detailed event system policy configuration Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax show event-system-policy [config|detail] Parameters • show event-system-policy [config|detail] Examples rfs7000-37FABE(config)#show event-system-policy config testpolicy -------------------------------------------------------------------------- MODULE EVENT SYSLOG SNMP FORWARD EMAIL -------------------------------------------------------------------------- aaa radius-discon-msg on on on default -------------------------------------------------------------------------- rfs7000-37FABE(config)# rfs7000-37FABE event-system-policy Displays event system policy configuration config Displays configuration for a specified policy detail Displays detailed configuration for a specified policy Specify the event system policy name.
6 - 38 WiNG CLI Reference Guide 6.1.19 file show commands Displays file system information Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax show file [information |systems] Parameters • show file [information |systems] Examples rfs7000-37FABE(config)#show file systems File Systems: Size(b) Free(b) Type Prefix - - opaque system: 10485760 9916416 flash nvram: 20971520 20131840 flash flash: - - network (null) - - network rdp: - - network sftp: - - network http: - - network ftp: - - network tftp: 20971520 20131840 - hotspot: rfs7000-37FABE(config)# rfs7000-37FABE(config)#show file information flash flash:: type is directory NOTE: This command is not available in the USER EXEC Mode. information Displays file information – Specify the file name. systems Lists all file systems present in the system
SHOW COMMANDS 6 - 39 6.1.20 firewall show commands Displays wireless firewall information, such as DHCP snoop table entries, denial of service statistics, active session summaries etc. Supported in the following platforms: AP300 AP621 AP650 AP6511 AP6521 AP6532 AP71XX RFS4000 RFS6000 RFS7000 NX9000 NX9500 Syntax show firewall [dhcp|dos|flows] show firewall [dhcp snoop-table|dos stats] {on }] show firewall flows {[filter|management|on|stats|wireless-client ]} show firewall flows {filter [dir|dst port |ether|flow-type|icmp| igmp|ip|max-idle|min-bytes|min-idle|min-pkts|not|port|src|tcp|udp]} show firewall flows {management {on }|stats {on }|wireless-client |on } Parameters • show firewall [dhcp snoop-table|dos stats] dhcp snoop-table Displays Dynamic Host Configuration Protocol (DHCP) snoop table entries snoop-table – Displays DHCP snoop table entries DHCP snooping acts as a firewall between non-trusted hosts and the DHCP server. Snoop table entries contain MAC address, IP address, lease time, binding type, and interface information of non-trusted interfaces. dos stats Displays Denial of Service (DoS) statistics on The following are common to the DHCP snoop table and DoS stats parameters: on – Optional. Displays snoop table entries, or DoS stats on a specified device – Specify the name of the AP or wireless controller.
6 - 40 WiNG CLI Reference Guide • show firewall flows {management {on }|stats {on }|wireless-client |on } • show firewall flows filter [(dir|dst|ether|flow-type|icmp|igmp|ip| max-idle|min-bytes|min-idle|min-pkts|not|port|src|tcp|udp)] {(dir|dst|ether| flow-type|ip|max-idle|min-bytes|min-idle|min-pkts|port|src)} firewall flows Notifies a session has been established management {on }Optional. Displays management traffic firewall flows on – Optional. Displays firewall flows on a specified device – Specify the name of the AP or wireless controller. stats {on }Optional. Displays active session summary on – Optional. Displays active session summary on a specified device – Specify the name of the AP or wireless controller. wireless-client Optional. Displays wireless clients firewall flows – Specify the MAC address of the wireless client. on Optional. Displays all firewall flows on a specified device – Specify the name of the AP or wireless controller. firewall filter Defines additional firewall flow filter parameters dir [wired-wired|wired- wireless|wireless- wired|wireless-wireless] Matches the packet flow direction wired-wired – Wired to wired flows wired-wireless – Wired to wireless flows wireless-wired – Wireless to wired flows wireless-wireless – Wireless to wireless flows dst Matches the destination port with the specified port – Specifies the destination port – Specify the destination port number from 1 - 65535. ether [dst |host | src|vlan]Displays Ethernet filter options dst – Matches the destination MAC address host – Matches flows containing the specified MAC address src – Matches only the source MAC address vlan – Matches the VLAN number of the traffic with the specified value. Specify a value from 1- 4094. flow-type [bridged|natted|routed| wired|wireless]Matches the traffic flow type bridged – Bridged flows natted – Natted flows routed – Routed flows wired – Flows belonging to wired hosts wireless – Flows containing a mobile unit
SHOW COMMANDS 6 - 41 icmp {code|type} Matches flows with the specified Internet Control Message Protocol (ICMP) code and type code – Matches flows with the specified ICMP code type – Matches flows with the specified ICMP type igmp Matches Internet Group Management Protocol (IGMP) flows ip [dst |host |proto | src ] Filters firewall flows based on the IPv4 parameters passed dst – Matches destination IP address host – Matches flows containing IPv4 address proto – Matches the IPv4 protocol src – Matches source IP address max-idle Filters firewall flows idle for at least the specified duration. Specify a max-idle value from 1 - 4294967295 bytes. min-bytes Filters firewall flows seen at least the specified number of bytes. Specify a min-bytes value from 1 - 4294967295 bytes. min-idle Filters firewall flows idle for at least the specified duration. Specify a min-idle value from 1 - 4294967295 bytes. min-pkts Filters firewall flows with at least the given number of packets. Specify a min-bytes value from 1 - 4294967295 bytes. not Negates the filter expression selected port Matches either the source or destination port. Specify a port from 1 - 65535. src Matches the source port with the specified port. Specify a port from 1 - 65535. tcp Matches TCP flows udp Matches UDP flows
6 - 42 WiNG CLI Reference Guide Examples rfs7000-37FABE(config)#show firewall dhcp snoop-table on rfs7000-37FABE Snoop Binding Type Controller-SVI, Touched 32 seconds ago -------------------------------------------------------------------------- Snoop Binding Type Controller-SVI, Touched 1 seconds ago -------------------------------------------------------------------------- rfs7000-37FABE(config)# rfs7000-37FABE(config)#show firewall flows management on rfs7000-37FABE ========== Flow# 1 Summary ========== Forward: Vlan 1, TCP 172.16.10.10 port 3995 > 172.16.10.1 port 22 00-02-B3-28-D1-55 > 00-15-70-37-FA-BE, ingress port ge1 Egress port: , Egress interface: vlan1, Next hop: (00-15-70-37-FA-BE) 573 packets, 49202 bytes, last packet 0 seconds ago Reverse: Vlan 1, TCP 172.16.10.1 port 22 > 172.16.10.10 port 3995 00-15-70-37-FA-BE > 00-02-B3-28-D1-55, ingress port local Egress port: ge1, Egress interface: vlan1, Next hop: 172.16.10.10 (00-02-B3-28-D1-55) 552 packets, 63541 bytes, last packet 0 seconds ago TCP state: Established Flow times out in 1 hour 30 minutes rfs7000-37FABE(config)# rfs7000-37FABE(config)#show firewall flows stats on rfs7000-37FABE Active Flows 2 TCP flows 1 UDP flows 0 DHCP flows 1 ICMP flows 0 IPsec flows 0 L3/Unknown flows 0 rfs7000-37FABE(config)#