Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
43 Australia 
nInterfac e Comp anding : A-law
nLine Cod ing: HDB3
nSignaling Mode: CAS
nCountry Protoc ol: 2
nInterc onnec t: p b x
nCRC?: no
nId le Cod e: 11111111 
— ISDN-PRI (Private Network) Sig naling
This examp le assumes use of US Op tion 1 with fac ility assoc iated  
sig naling . Other feature op tions will req uire c hang es in one or more 
ad ministered  items.
nDS1 Ad ministration sc reen
— Circ uit Pac k: TN464D (TN464C,B from up g rad es)
— Bit Rate: 2.048
— Interfac e Comp anding : A-law
— Line Cod ing: HDB3
— Sig naling  Mod e: isd n-p ri
— Country Protoc ol: 2
— Connec t: p b x
— Interfac e: user 
—CRC: No
— Id le Cod e: 11111111 
nSignaling Group screen
— Assoc iated Sig naling : Yes
— Primary D_Channel: xxxx16 (xxxx= > dep end s on CP 
p hysical location)
nTrunk Group  Ad ministration sc reen
— Group Type: isdn-pri
— Servic e Typ e: tie
— ISDN-PRI (Public  Network)
nDS1 Ad ministration sc reen
— Circ uit Pac k: TN464D (Not entered  as ad ministrab le 
item; TN464C from up grad es)
— Bit Rate: 2.048
— Interfac e Comp anding : A-law 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
44 Australia 
— Line Cod ing: HDB3
— Sig naling  Mod e: isd n-p ri
— Country Protoc ol: 2
— Connec t: Network
—CRC: No
— Id le Cod e: 11111111 
nSignaling Group screen
— Assoc iated Sig naling : Yes
— Primary D_Channel: xxxx16 (xxxx= > dep end s on CP 
p hysical location)
nTrunk Group  Ad ministration sc reen
— Group Type: isdn-pri
— Service Type: public_ntwrk 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
45 Belgium & Luxembourg 
Belgium & Luxembourg
Ta b l e  1 7 shows the rec ommended  c irc uit p ac ks.
Table 17. Recommended and Available CPs in Belgium & Luxembourg 
Equipment Equipment Type
Cab inet Typ e & Power GAC-MCC DC-MCC AC-SCC AC-CSCC 
AC-CMC
AC Power Voltag e & Freq 220V/50Hz 
Ring  Generator 25Hz
Tone Detec tor > TN2182B > TN744D TN420C
Tone Cloc k > TN2182B TN780
R2MFC Circ uit > TN744D TN744B
Sp eec h Synthesizer > TN457 
Call Classifier > TN744D
Announc ement TN750C TN750B
Analog DID Trunk > TN2146
Analog  CO Trunk (No PPM)  > TN2147C TN2147
Analog  CO Trunk (w/PPM) #TN465C > TN465B
4 Wire Tie Trunk > TN760Dv11
2 Wire Tie Trunk n/a
Auxiliary Trunk > TN763D 
Dig ital CO/DID Trunk > TN464F TN464E TN464D
Dig ital Tie Trunk > TN464F TN464E TN464D 
Dig ital PRI CO Trunk > TN464F TN464E TN464D 
Dig ital BRI Trunk > TN2185
Dig ital Converter PRI-DASS   
Dig ital Converter PRI-DPNSS
Dig ital Converter PRI-BRI   
8 Port Analog  Line n/a
16 Port Analog  Line #TN2183> TN2149 
24 Port Analog  Line n/a
Continued on next page 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
46 Belgium & Luxembourg 
Feature Administration
The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e 
ap p roval was award ed . The sc reens may have c hang ed  sinc e that d ate.
Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
nARS/AAR Ad ministration
To enab le ARS administration, on the System-Parameters 
Customer-Op tions sc reen, set the ARS
 field  to y
. You also should check all 
ARS/AAR d efaults. All d efault ARS analysis c odes are deleted  b efore 
d ialed  strings are ad d ed for routing when DEFINITY is installed  outsid e of 
North Americ a. Be aware that the d efault for the 10 d ig its c ause dialing 
p rob lems. In p artic ular, the following  c all typ es (ap pear as ARS/AAR 
d efaults) typ ic ally are not used  in non-North Americ an ARS/AAR tab les:
Luc ent rec ommend s only the following  c all typ es b e used  outside North 
Americ a: 4 Wire Digital Line > TN754B 
2 Wire Digital Line #TN2224 > TN2181 TN2136
Data Line > TN726B 
BRI-U Line
BRI-ST Line
fnp a: North Americ an numb ers with an area c od e.
hnp a: North Americ an numb ers without an area c od e.
svc : North Americ an numb ers of the screen ‘‘x11’’.
int: For all international numbers.
natl: For all national PN numb ers.
pubu: For all other external (that is, not extensions) numbers. Ta b l e  1 7 .Recommended and Available CPs in Belgium & Luxembourg  — 
Continued
Equipment Equipment Type
Continued on next page 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
47 Belgium & Luxembourg 
nRoute Pattern ad ministration 
— First Dial Tone Detec tion (always need ed )
nNumb er Delete Dig its: 0
nInserted  Digits: +
— Sec ond  Dial Tone Detec tion (need ed  on some analog CO trunks)
nNumb er Delete Dig its: 2 (Dialed  String  00)
nInserted  Digits: + 00+
System Parameter Administration
Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
n Feature-Related  System Parameters Ad ministration
— Off Premise Tone Detection Timeout: 10 sec
— Trunk-to-Trunk Transfer: Not p ermitted  in Belg ium
— Distinc tive Aud ib le Alerting :
nInt: 1
nExt: 2
nPri o r it y:  2
— DID/TIE/ISDN Interc ep t Treatment: Attend ant
— Pub lic  Network Trunks on Conferenc e Call: 1
— Conferenc e Parties With PNTs: 3
— Conferenc e Parties Without PNTs: 6
— Line Interc ep t Tone Timer: 30
— Nig ht Servic e Disc onnec t Timer: 180 sec
— Short Interd ig it Timer: 3 sec
— Unanswered  DID Call Timer: 25 sec
—Auto-Hold: Yes 
2
— Attend ant Tone: Yes
— Bridg ing  Tone: No
— Conferenc e Tone: No
— Intrusion Tone: Yes
— Rep etitive Call Waiting Tone: Yes
2. Althoug h not a Type App roval issue, this rep resents the convention for this country. 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
48 Belgium & Luxembourg 
— DID Busy Treatment: Attend ant
— Pull Transfer: No
— Level of Tone Detec tion: Med ium
— Outp ulse Without Tone: Yes
— (Station-to-switc h) Rec all Timing :
nFlashhook Interval: No 
nDisc onnec t Timing : 350 ms
— Network Feed b ac k During  Tone Detec tion: No
nSystem Parameter Multifreq uenc y Sig naling  Ad ministration
— Inc oming  Call Typ e: non-g roup-ii-mfc  (use d efault translations)
— Test Call Extension: 160 or as neg otiated .
nSystem Parameter Country Op tions Ad ministration
— Comp and ing  Mode: A-law
— Base Tone Generation Set: 8
— Tone Detec tion Mod e: 5
— Dig ital Loss Plan: 8
— Interd ig it Pause: long
— Dial Tone Valid ation Timer: 600 ms
— Analog Ringing Cadence: 8
— Customized Individual Tones
Customized  tone d efinitions follow the syntax as sp ec ified :
[ (Freq uenc y/Level)|silenc e|g oto)] [ (Duration ms)|(Step)]
nInterc ept Tone:
1. (425/-4)(250)
2. (silenc e)(250)
3. (goto)(1)
nConferenc e Tone:
1. (425/-11)(200)
2. (silenc e)(9800)
3. (goto)(1)
n1 Call Wait Tone:
1. (425/-11)(200) 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
49 Belgium & Luxembourg 
n2 Call Wait Tone:
1. (425/-11)(200)
Analog Trunk Administration
nCO Trunks
— Trunk Group  Sc reen
nGroup  Typ e: CO 
nDirec tion: two-way
NOTE:
All trunks in Belg ium are one-way b ut outgoing trunks 
must b e marked two-way in ord er to b e ab le to selec t 
c yc lic al hunt =  y.
nDig it Ab sorp tion List: b lank 
nCountry Code: 8
nDial Ac c ess: No
nPre f i x -1 :  N o
nTrunk Type: loop -start
nOutg oing  Dial Typ e:
— Dig ital Trunks: tone
— Analog  Trunks: tone or rotary
nTrunk Termination: rc  (c omp lex imp ed anc e)
nAuto Guard : no 
nSig  Bit Inversion: none
nCall Still Held : no 
nTerminal Balanc ed : no 
nRec eive Answer Sup ervision: no Trunk Gain Loop Length 
hig h long
low short
RA Trunk Loss Loop Length
2d B long
0d B short 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
50 Belgium & Luxembourg 
nAnswer Supervision Timeout: 10 (This sets both the CP 
firmware timer and  software timer. Set to 0 for any trunk that 
will rec eive answer sup ervision.)
nDisc onnec t Sup ervision - In:
— Analog Trunks: no
— Dig ital Trunks: yes
nDisc onnec t Sup ervision - Out: Selec tion is c ustomer’s 
choice.
nDisc onnec t Timing : 500 msec  (This field  will not b e used  for 
CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
Disc onnec t timers. Set these latter two timers from the 
Ad ministrab le Timers Sc reen.)
nCyc lic al Hunt: Yes
nSup p ress # Outpulsing : yes
— Trunk Group  Ad ministration Sc reen (Timing )
Set the following  timers from the Administrab le Timers sc reen 
d uring ad ministration of eac h trunk g roup . Selec t the following  CO 
trunk timer values for this c ountry:
nInc oming  Disc onnec t: 600 ms
nOutg oing  Disc onnec t: 500 ms
nOutg oing  Dial Guard : 1600 ms 
nInc oming  Glare Guard : 1500 ms 
nOutg oing  Glare Guard : 1500 ms 
nOutg oing  Dial Pulse Rate (PPS): 10 p p s
nOutg oing  Rotary Dig it Dial Make: 35 ms
nOutg oing  Rotary Dig it Dial Break: 65 ms
nOutg oing  Rotary Dial Interd igit: 800 ms
nRing  Monitor Timer: 5200 ms
nInc oming  Seizure: 500 ms
nOutg oing  End -of-Dial: 10 sec
nOutg oing  Seizure Resp onse: 
— Analog  trunks: 10 sec
— Dig ital trunks: 2 sec
nProg rammed  Dial Pause: 1500 ms
nEnd -To-End  Sig naling  Pause: 150 ms (ac c ep t d efault)
nEnd -To-End  Sig naling  Tone: 350 ms (ac c ep t d efault) 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
51 Belgium & Luxembourg 
nPPM: yes 
nFreq uenc y: 16 khz
nFlash Leng th: 100 ms
nDID Trunks
— Trunk Group  Sc reen
nGroup  Typ e: DID
nDirection: incoming
nCountry Code: 8
nTrunk Gain: hig h or low as req uired  b y loop  leng th
nDig it Ab sorp tion List: b lank 
nInc oming  Dial Typ e: MF
nTrunk Type: immed -start
nTrunk Termination: rc  (c omp lex imp ed anc e)
nDisc onnec t Timing : 500 msec  (This field  will not b e used  with 
CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
Disc onnec t timers. Set these latter two timers from the 
Ad ministrab le Timers Sc reen.)
nDig it Treatment: b lank 
nDig its: b lank 
nExpected Digits: 3 or 4
nTerminal Balanc ed : no 
nRA Trunk Loss: 0d B 
nExtend ed  Loop  Range: (Used  Only with TN459) no 
nDrop  Treatment: silenc e 
nDisc onnec t Sup ervision:
— Analog Trunks: no
— Dig ital Trunks: yes
nInc oming  Rotary Timeout (sec ): 5 sec  (This field  will not b e 
used  with CPs that c an ac c ept the Inc oming  Partial Dial 
timer. Set this timer from the Ad ministrab le Timers Sc reen.)
nSup p ress # Outpulsing : yes
— Trunk Group  Ad ministration Sc reen (Timing )
Set the following  timers from the Administrab le Timers sc reen 
d uring ad ministration of eac h trunk g roup . Selec t the following  DID 
trunk timer values for this c ountry:
nInc oming  Disc onnec t: 600 ms 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
52 Belgium & Luxembourg 
nInc oming  Dial Guard : 50 ms
nInc oming  Partial Dial: 18 sec
nInc oming  Inc omplete Dial: 60 sec
nFlash Leng th: 100 ms
nTi e  Tru n k s
No sp ec ial Typ e Ap p roval reg ulations ap ply. Tie trunks are ad ministered  
on a c ase-b y-c ase b asis.
Digital Trunk Administration
This sec tion d oes not list all p ossib le valid  ad ministrable c omb inations: Only the 
most c ommon or stand ard  c omb ination, c omp atib le with p ub lic -network and  
Typ e Ap proval stand ard s for eac h c ountry, is p resented :
nCO Trunks
— DS1 Ad ministration Sc reen
nCirc uit Pac k: TN464D
nBit Rate: 2.048
nInterfac e Comp anding : A-law
nLine Cod ing: HDB3
nSignaling Mode: CAS
nCountry Protoc ol: 8
nInterc onnec t: CO
nCRC?: No
nId le Cod e: 01010100 
— Trunk Group  Ad ministration Sc reen (Timing )
Dig ital trunk timing  values should  b e set as for analog  CO trunks 
with the following  exc ep tion.
nOutg oing  Seizure Resp onse: 2 sec .
nDID Trunks
— DS1 Ad ministration Sc reen
nCirc uit Pac k: TN464D
nBit Rate: 2.048
nInterfac e Comp anding : A-law
nLine Cod ing: HDB3
nSignaling Mode: CAS
nCountry Protoc ol: 8