Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
183 France 
Time of Day Routing
nOBJECT: time-of-d ay-routing
— En g li s h :  EN TER A C TI VATI O N  RO U TE PL A N ,  D AY &  TI M E
Translation: SAISIR H/DATE ACTIVATION AGENDA ROUTAGE
— En g li s h :  EN TER D EA C TI VATI O N  D AY A N D  TI M E
Translation: SAISIR H/DATE DESACTIVATION AGENDA
— Eng lish: OLD ROUTE PLAN: ENTER NEW PLAN:
Translation: ANCIEN AGENDA: SAISIR NOUVEAU:
— Eng lish: OLD ROUTE PLAN: NEW PLAN:
Translation: ACIEN AGENDA: NOUVEAU:
— En g li s h :  ROU TE PL A N :  FO R A C T- TI M E:
Translation: AGENDA: HeureDeb ut:
— En g li s h :  ROU TE PL A N :  FO R D EA C T- TI M E:
Translation: AGENDA: POUR Heure Fin:
Softkey Labels
The following  translations are c onsistent with the 8400 and 9400 DCP Terminals - 
Foreig n Lang uag e Translation Req uirements).
nOBJECT: softkey-lab els
—English: AD 
Translation: NoAb r
— Eng lish: AutCB   
Translation: Rap pl 
—English: CFrwd   
Translation: RTemp
— Eng lish: CnLWC    
Translation: AnMsg
— Eng lish: Cnslt   
Translation: Notif
— Eng lish: Count    
Translation: Comp t
— Eng lish: CPark     
Translation: Parc 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
184 France 
— Eng lish: CPkUp    
Translation: Intc p
—English: Dir
Translation: Rp ert
—English: Excl
Translation: Protc
—English: HFAns
Translation: inter
— Eng lish: IAuto
Translation: IAuto 
— Eng lish: IDial
Translation: IAbr 
— Eng lish: Insp t
Translation: Info 
— Eng lish: Last
Translation: Bis
—English: LWC
Translation: Msg
—English: Mark
Translation: ModMF
— English: Pause 
Translation: Pause
— Eng lish: PCall
Translation: Prior
—English: Prog
Translation: Prog
— Eng lish: Rng Of 
Translation: SOff
—English: SAC
Translation: RFixe
—English:SFunc
Translation: FSp ec 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
185 France 
—English: Spres
Translation: Sup p r
— Eng lish: Stats
Translation: Stats
— Eng lish: Stop
Translation: Stop
—English: Timer
Translation: Chron
— Eng lish: TmDay    
Translation: H/Dat
— Eng lish: View
Translation: AffNo
—English: Wait
Translation: AttTo
Vu S t a t s
nOBJECT: vustats
—English: FORMAT 
Translation: FORMAT
— Eng lish: NOT DEFINED
Translation: NON DEFINI
— En g li s h :  D O ES N O T A L L OW OR REQU I RE I D  
Translation: NO IDENTIFICATION REQUIS
—English: AGENT
Translation: AGENT
— Eng lish: SPLIT/SKILL 
Translation: GROUPE ACD
— Eng lish: TRUNK GROUP
Translation: GR. LIGNES
—English: VDN
Translation: VDN
— En g li s h :  N O T AD M I N I STERED
Translation: NON ADMINISTRE 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
186 France 
— Eng lish: NOT MEASURED
Translation: NON MESURE
— En g l i s h :  A GEN T N O T L OG G ED  I N
Tr a n sl a t i o n :  AG EN T N ’AYA N T PA S ETA B L I  L A 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
187 Germany 
Germany
Ta b l e  2 9 shows the rec ommended  c irc uit p ac ks.
Table 29. Recommended and Available CPs in Germany
Equipment Equipment Type
Cab inet Typ e & Power GAC-MCC DC-MCC AC-SCC AC-CSCC 
AC-CMC
AC Power Voltag e & Freq 220V/50Hz 
Ring  Generator 25Hz
Tone Detec tor > TN2182B > TN744D TN420C
Tone Cloc k > TN2182B TN780
R2MFC Circ uit n/a
Sp eec h Synthesizer n/a
Call Classifier > TN744D
Announc ement #TN750C > TN750B 
Analog  DID Trunk > TN2184 (See the note that follows this 
tab le.)
Analog  CO Trunk (No PPM)  > TN2147C
Analog  CO Trunk (w/PPM) > TN2184
4 Wire Tie Trunk n/a
2 Wire Tie Trunk n/a
Auxiliary Trunk > TN763D 
Dig ital CO/DID Trunk n/a
Dig ital Tie Trunk > TN464F TN464E 
Dig ital PRI CO Trunk > TN464F
Dig ital BRI Trunk > TN2185
Dig ital Converter PRI-DASS   
Dig ital Converter PRI-DPNSS
Dig ital Converter PRI-BRI    #TN-PRI-BRI
8 Port Analog  Line n/a
16 Port Analog  Line #TN2183 > TN2180
Continued on next page 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
188 Germany 
NOTE:
TN2184 p rovides DIOD op eration and PPM at 12Hz or 16Hz, b ut not at 
50Hz.
Feature Administration
The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e 
ap p roval was award ed . The sc reens may have c hang ed  sinc e that d ate.
Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
nARS/AAR Ad ministration
To enab le ARS administration, on the System-Parameters 
Customer-Op tions sc reen, set the ARS
 field  to y
. You also should check all 
ARS/AAR d efaults. All d efault ARS analysis c odes are deleted  b efore 
d ialed  strings are ad d ed for routing when DEFINITY is installed  outsid e of 
North Americ a. Be aware that the d efault for the 10 d ig its c ause dialing 
p rob lems. In p artic ular, the following  c all typ es (ap pear as ARS/AAR 
d efaults) typ ic ally are not used  in non-North Americ an ARS/AAR tab les: 24 Port Analog  Line n/a
4 Wire Digital Line > TN754B 
2 Wire Digital Line #TN2224 > TN2181 
Data Line > TN726B 
BRI-U Line
BRI-ST Line TN556B
fnp a: North Americ an numb ers with an area c od e.
hnp a: North Americ an numb ers without an area c od e.
svc : North Americ an numb ers of the sc reen ‘‘x11’’.
Ta b l e  2 9 .Recommended and Available CPs in Germany — Continued
Equipment Equipment Type
Continued on next page 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
189 Germany 
Luc ent rec ommend s only the following  c all typ es b e used  outside North 
Americ a:
System Parameter Administration
Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
nFeature-Related System Parameters Ad ministration
— Trunk-to-Trunk Transfer: Restric ted (of Pub lic  trunks not p ermitted  in 
Germany)
— Coverag e - Sub sequent Redirec tion No Answer Interval: 1
— Coverag e - Caller Resp onse Interval (sec ond s): 1
— Keep  Held  SBA at Coverag e Point? y
— Automatic  Callb ac k - No Answer Timeout Interval (ring s): 2
— Call Park Timeout Interval (minutes): 3
— Off-Premises Tone Detec t Timeout Interval (sec ond s): 15
— AA R/ ARS Dia l To ne Req u ire d :  y
— DID/TIE/ISDN Interc ep t Treatment: Attend ant
— Time b efore Off-hook Alert: 10
— Servic e Ob serving  Warning  Tone: Yes
— Pub lic  Network Trunks on Conferenc e Call: 1
— Conferenc e Parties With PNTs: 3
— Conferenc e Parties Without PNTs: 6
— Nig ht Servic e Disc onnec t Timer: 180 sec
— Short Interd ig it Timer: 3 sec
— Unanswered  DID Call Timer: 25 sec
— Line Interc ep t Tone Timer (sec onds): 30
—Auto-Hold: Yes1
— Attend ant Tone: Yes
— Bridg ing  Tone: No int: For all international numb ers.
natl: For all national PN numbers.
p ub u: For all other external (that is, not extensions) 
numbers. 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
190 Germany 
— Conferenc e Tone: Yes
— Intrusion Tone: Yes
— DID Busy Treatment: Attend ant
— Pull Transfer: No
— Level of Tone Detec tion: Med ium
— Wait Answer Sup ervision Timer: No
— Rep etitive Call Waiting Tone: Yes
— Outp ulse Without Tone: No
— Network Feed b ac k During  Tone Detec tion: No
— Interc ept Treatment On Failed  Trunk Transfers: No
— (Station-to-switc h) Rec all Timing :
nFlashhook Interval: No
nDisc onnec t Timing : 250 ms
nSystem Parameter Country Op tions Ad ministration
— Comp and ing  Mode: A-law
— Base Tone Generation Set: 13
— Tone Detec tion Mod e: 4
— Interd ig it Pause: long
— Dial Tone Valid ation Timer: 600ms
— Analog  Ring ing  Cad enc e: 13
— Customized Individual Tones
— Customized  tone d efinitions follow the syntax as sp ec ified :
[ (Freq uenc y/Level)|silenc e|g oto)] [ (Duration ms)|(Step)]
nBusy
— (425/-4)(500)
— (silence)(500) (475 is desired, but not possible)
— (go to)(1)
nRe o rd e r
— (425/-4)(250)
— (silence)(250)
— (go to)(1)
nRingback
— (425/-4)(1000) 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
191 Germany 
— (silenc e)(4000)
— (go to)(1)
Analog Trunk Administration
nCO Trunks
— Trunk Group  Sc reen
nGroup  Typ e: CO 
nCOR: COR for CO trunks must have a hig her FRL than all 
inc oming  Tie trunk g roup s. (This is req uired  sinc e German 
reg ulations p rohib it c onnec ting  two trunks even throug h a 
p rivate network.)
nDirec tion: two-way 
nDial Ac c ess: Customer Op tion, No is rec ommend ed  to avoid  
toll fraud
nCountry Code: 13
nDig it Ab sorp tion List: b lank
nPre f i x -1 :  N o
nTrunk Type: loop -start
nOutg oing  Dial Typ e: tone
nTrunk Termination: rc  (c omp lex imp ed anc e)
nParameters b ased  on loop  leng th (whic h itself is not 
ad ministrable)
nAuto Guard : no
nSig  Bit Inversion: none
nCall Still Held : no
nRec eive Answer Sup ervision: no
nAnswer Supervision Timeout: 10 (This sets both the CP 
firmware timer and  software timer. Set to 0
 for any trunk 
rec eiving  answer supervision.)
nDisc onnec t Sup ervision - In:
— Analog Trunks: yes
— Dig ital Trunks: yes Loop Length Trunk Gain Terminal Balance RA Trunk Loss
short low n 0dB
long high n 2dB 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
192 Germany 
nDisc onnec t Sup ervision - Out: no
nDisc onnec t Timing : 500 msec  (This field  will not b e used  with 
CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
Disc onnec t timers. Set these latter two timers from the 
Ad ministrab le Timers Sc reen.)
nSup p ress # Outpulsing : yes
— Trunk Group  Ad ministration Sc reen (Timing )
Set the following  timers from the Administrab le Timers sc reen 
d uring ad ministration of eac h trunk g roup . Selec t the following  CO 
trunk timer values for this c ountry:
nInc oming  Disc onnec t: 1100 ms
nOutg oing  Disc onnec t: 1100 ms
nOutg oing  Dial Guard : 4000 ms
nInc oming  Glare Guard : 1500 ms
nOutg oing  Glare Guard : 1500 ms
nOutg oing  Rotary Dial Interd igit: 800 ms
nRing  Monitor Timer: 5200 ms
nInc oming  Seizure: 500 ms
nOutg oing  End -of-Dial: 10 sec
nOutg oing  Seizure Resp onse:
— Analog  trunks: 5 sec
— Dig ital trunks: 2 sec
nProg rammed  Dial Pause: 1500 ms
nFlash Leng th: 540 ms
nEnd -To-End  Sig naling  Pause: 150 ms
nEnd -To-End  Sig naling  Tone: 350 ms
nPPS:  1 0
nMake: 40 ms
nBreak: 60 ms
nPPM :  n  
nDIOD Trunks
— Trunk Group  Sc reen
nGroup  Typ e: DIOD
nDirec tion: two-way
nCountry Code: 13