Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual

Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 484
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    363 Russia 
    — Trunk Group  Sc reen
    nGroup  Typ e: DID
    nCountry: 15
    nTrunk Gain: hig h
    nDirection: incoming
    nProtoc ol Typ e: inloc  or intol
    nDig it Ab sorp tion List: b lank 
    nInc oming  Dial Typ e: rotary
    nTrunk Type: loop -start
    nTrunk Termination: rc  (c omp lex imp ed anc e)
    nDisc onnec t Sup ervision: yes
    nDisc onnec t Timing : 500 msec  (This field  will not b e used  with 
    CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
    Disc onnec t timers. Set these latter two timers from the 
    Ad ministrab le Timers Sc reen.)
    nDig it Treatment: b lank 
    nDig its: b lank 
    nExp ec ted  Dig its: d ep end s on system size and  numb ering  
    plan
    nTerminal Balanc ed : yes 
    nDrop  Treatment: silenc e 
    nInc oming  Rotary Timeout (sec ): 5 sec  (This field  will not b e 
    used  with CPs that c an ac c ept the Inc oming  Partial Dial 
    timer. Set this timer from the Ad ministrab le Timers Sc reen.)
    — Trunk Features Sc reen
    nShuttle: yes
    nStart B Sig nal: 1
    nReq uest Categ ory: no
    — Trunk Group  Ad ministration Sc reen (Timing )
    Set the following  timers from the Administrab le Timers sc reen 
    d uring ad ministration of eac h trunk g roup . Selec t the following  DID 
    trunk timer values for this c ountry:
    nInc oming  Rotary Timeout: No effec t
    nDisc onnec t Timing : No effec t
    nInc oming  Disc onnec t: 100 ms
    nInc oming  Dial Guard : 40 ms 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    364 Russia 
    nInc oming  Partial Dial: 10 sec
    nInc oming  Seizure: No effec t
    nInc oming  Inc omplete Dial: 255 sec
    nDisc onnec t Sig nal Error: 60 sec
    nFlash Leng th: No effec t
    nInc oming  Inc omplete Dial Alarm: No effec t
    nAnswer Send : 200 ms
    nEnd -To-End  Sig naling  Pause: 160 ms (ac c ep t d efaults)
    nEnd -To-End  Sig naling  Tone: 360 ms (ac c ep t d efaults)
    nTi e  Tru n k s
    No information regard ing  Typ e App roval-related  setting s is c urrently 
    availab le.
    Digital Trunk Administration
    Not all p ossib le valid  ad ministrab le c omb inations are listed in this sec tion: Only 
    the most c ommon or stand ard c ombination, c omp atib le with p ub lic -network and  
    Typ e Ap proval stand ard s for eac h c ountry is presented :
    nCO Trunks
    — DS1 Ad ministration Sc reen 
    19
    nCirc uit Pac k: TN464D (not entered as an ad ministrab le item)
    nBit Rate: 2.048
    nInterfac e Comp anding : A-law
    nLine Cod ing: HDB3
    nSignaling Mode: CAS
    nCountry Protocol: 15 
    nInterc onnec t: CO
    nCRC?: No
    nId le Cod e: 01010100 
    — Trunk Group  Ad ministration Sc reen (Timing )
    Dig ital trunk timing  values should  b e set as for analog  CO trunks.
    nDID Trunks
    — DS1 Ad ministration Sc reen
    19. DS1 is also analog ous to the term E1 that has b een c oined  for the European T1 or 2 mb it 
    interfac e. 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    365 Russia 
    nCirc uit Pac k: TN464D (not entered as an ad ministrab le item)
    nBit Rate: 2.048
    nInterfac e Comp anding : A-law
    nLine Cod ing: HDB3
    nSignaling Mode: CAS
    nCountry Protocol: 15 
    nInterc onnec t: CO
    nCRC?: No
    nId le Cod e: 01010100 
    — Trunk Group  Ad ministration Sc reen (Timing )
    Dig ital trunk timing  values should  b e set as for analog  DID trunks.
    nTi e  Tru n k s
    — Non-ISDN Sig naling  Examp le (DS1 Ad ministration Sc reen)
    nCirc uit Pac k: TN464D (Not entered  as ad ministrab le item; 
    TN464C from up g rad es)
    nBit Rate: 2.048
    nInterfac e Comp anding : A-law
    nLine Cod ing: HDB3
    nSignaling Mode: CAS
    nCountry Protocol: 1 
    nInterc onnec t: p b x
    nCRC?: no
    nId le Cod e: 01010100 
    — ISDN-PRI (Private Network) Sig naling
    This examp le assumes use of US Op tion1 with fac ility assoc iated  
    sig naling . Other feature op tions will req uire c hang es in one or more 
    ad ministered  items.
    nDS1 Ad ministration sc reen
    — Circ uit Pac k: TN464D (or TN464C from up g rad es)
    — Bit Rate: 2.048
    — Interfac e Comp anding : A-law
    — Line Cod ing: HDB3
    — Sig naling  Mod e: isd n-p ri
    — Country Protoc ol: 1 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    366 Russia 
    — Connec t: p b x
    — Interfac e: user 
    —CRC: No
    — Id le Cod e: 11111111 
    nSignaling Group screen
    — Assoc iated Sig naling : Yes
    — Primary D_Channel: xxxx16 (xxxx= > dep end s on CP 
    p hysical location)
    nTrunk Group  Ad ministration sc reen
    — Group Type: isdn-pri
    — Servic e Typ e: tie
    — ISDN-PRI (Public  Network) (Not availab le for this c ountry. 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    367 Saudi Arabia 
    Saudi Arabia
    Overview
    nR2-MFC DID sig naling  is used .
    nTh e  PBX s u p p l ie s  D I D  Ba t t e r y.
    n600 resistive imp ed anc e is used  on CO trunks.
    nRing b ac k tone to network: 425 Hz 1.2/4.65 Cad enc e.
    Ta b l e  5 0
     shows the rec ommended  c irc uit p ac ks.
    Table 50. Recommended and Available CPs in Saudia Arabia
    Equipment Equipment Type
    Cab inet Typ e & Power GAC-MCC AC-MCC DC-MCC AC-SCC 
    DC-SCC AC-CSCC AC-CMC
    AC Power Voltag e & Freq 110V/60Hz 220V/50Hz
    Ring  Generator 20Hz
    Tone Detec tor > TN2182B > TN744D TN748D TN756
    Tone Cloc k > TN2182B TN780 TN756
    R2MFC Circ uit > TN7444D TN744B
    Sp eec h Synthesizer > TN725B 
    Call Classifier > TN744D
    Announc ement TN750C TN750B 
    Analog DID Trunk > TN753
    Analog  CO Trunk (No PPM)  > TN747B
    Analog  CO Trunk (w/PPM)
    4 Wire Tie Trunk > TN760D
    2 Wire Tie Trunk
    Auxiliary Trunk > TN763D TN763C
    Dig ital CO/DID Trunk > TN464F 
    Dig ital Tie Trunk > TN464F TN464E TN464D TN464C TN464B
    Dig ital PRI CO Trunk n/a 
    Dig ital BRI Trunk
    Continued on next page 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    368 Saudi Arabia 
    NOTE:
    A-law c ompand ing  is the national stand ard  in Saud i Arab ia. 
    However, Mu-law is used  internally to the system for servic e c irc uits 
    and  analog lines. Network interfac es are c onfig ured  as A-law if 
    req uired .
    Feature Administration
    Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
    c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
    nARS/AAR Ad ministration 
    To enab le ARS administration, on the System-Parameters 
    Customer-Op tions sc reen, set the ARS
     field  to y
    . You also should check all 
    ARS/AAR d efaults. All d efault ARS analysis c odes are deleted  b efore 
    d ialed  strings are ad d ed for routing when DEFINITY is installed  outsid e of 
    North Americ a. Be aware that the d efault for the 10 d ig its c ause dialing 
    p rob lems. In p artic ular, the following  c all typ es (ap pear as ARS/AAR 
    d efaults) typ ic ally are not used  in non-North Americ an ARS/AAR tab les: Dig ital Converter PRI-DASS
    Dig ital Converter PRI-DPNSS
    Dig ital Converter PRI-BRI   
    8 Port Analog  Line TN742
    16 Port Analog  Line > TN746B
    24 Port Analog  Line n/a
    4 Wire Digital Line > TN754B 
    2 Wire Digital Line TN#2224 > TN2181 
    Data Line > TN726B 
    BRI-U Line
    BRI-ST Line
    fnp a: North Americ an numb ers with an area c od e.
    hnp a: North Americ an numb ers without an area c od e.
    svc : North Americ an numb ers of the screen ‘‘x11’’.
    Ta b l e  5 0 .Recommended and Available CPs in Saudia Arabia — Continued
    Equipment Equipment Type
    Continued on next page 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    369 Saudi Arabia 
    Luc ent rec ommend s only the following  c all typ es b e used  outside North 
    Americ a:
    System Parameter Administration
    The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e 
    ap p roval was award ed . The sc reens may have c hang ed  sinc e that d ate.
    Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
    c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
    nFeature-Related System Parameters Ad ministration
    — Trunk-to-Trunk Transfer: Permitted  b y c ountry’s reg ulations - 
    Selec tion is c ustomer’s c hoic e.
    — Pub lic  Network Trunks on Conferenc e Call: 5
    — Conferenc e Parties With PNTs: 6
    — Conferenc e Parties Without PNTs: 6
    — Line Interc ep t Tone Timer: 30
    — Nig ht Servic e Disc onnec t Timer: 180 sec
    — Short Interd ig it Timer: 3 sec
    — Unanswered  DID Call Timer: 60 
    —Auto-Hold: Yes 
    20
    — Attend ant Tone: Yes
    — Bridg ing  Tone: No
    — Conferenc e Tone: No
    — Intrusion Tone: Yes
    — Rep etitive Call Waiting Tone: No
    — DID Busy Treatment: Attend ant
    — Pull Transfer: No
    — Level of Tone Detec tion: Broad b and
    — Outp ulse Without Tone: Yes int: For all international numbers.
    natl: For all national PN numb ers.
    pubu: For all other external (that is, not extensions) numbers.
    20. Althoug h not a Type App roval issue, this rep resents the convention for this country. 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    370 Saudi Arabia 
    — (Station-to-switc h) Rec all Timing :
    nFlashhook Interval: Yes 
    nUp p er Bound : 1000 ms 
    nLower Bound : 200 ms 
    nSystem Parameter Multifreq uenc y Sig naling  Ad ministration
    — Incoming Call Type: group-ii-mfc
    — Test Call Extension: As neg otiated
    — Inc oming  Interd ig it Timer: 10 sec
    — Inc oming  Sig nal Types:
    nCountry Op tions Parameters
    — Comp and ing  Mode: mu-law
    NOTE:
    Comp and ing  Mod e: A-law is the national stand ard . Mu-law is 
    used  internal to the system for servic e c irc uits and  analog  
    lines. Network interfac es are c onfig ured  as A-law if req uired .
    — Base Tone Generation Set: 9
    — Tone Detec tion Mod e: d efaultGROUP-I GROUP-II GROUP-A GROUP-B
    11: d rop
    12: ig nored
    13: maint-c all 
    14: ig nore
    15: ig nore1: normal
    2: b usy-rt-attd
    3: normal
    4: normal
    5: b usy-rt-attd
    6: d ata-c all
    7: normal
    8: d ata-c all
    9: b usy-rt-attd
    10: b usy-rt-attd
    11: normal
    12: b usy-rt-attd
    13: normal
    14: b usy-rt-attd
    15: normalUse d efaults 3: b usy
    4: c ong estion
    5: interc ep t
    6: free 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    371 Saudi Arabia 
    — Interdigit Pause: default
    — Dig ital Loss Plan: 9
    — Analog Ringing Cadence: 9
    Analog Trunk Administration
    nCO Trunks
    — Trunk Group  Sc reen
    nGroup  Typ e: CO 
    nCountry: 9
    nTrunk Gain: hig h
    nDirec tion: two-way 
    nDig it Ab sorp tion List: b lank 
    nPre f i x -1 :  N o
    nTrunk Type: loop -start 
    nOutg oing  Dial Typ e: tone 
    nTrunk Termination: rc  (c omp lex imp ed anc e)
    nAuto Guard : no 
    nDial Ac c ess: Yes
    nCall Still Held : no 
    nTerminal Balanc ed : yes 
    nRec eive Answer Sup ervision: no 
    nAnswer Supervision Timeout: 10 (This sets both the CP 
    firmware timer and  software timer. Set to 0 for any trunk that 
    will rec eive answer sup ervision.)
    nDisc onnec t Sup ervision - In: no
    nDisc onnec t Sup ervision - Out: Selec tion is c ustomer’s 
    choice.
    nDisc onnec t Timing : 500 ms (This field  will not be used  with 
    CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
    Disc onnec t timers. Set these latter two timers from the 
    Ad ministrab le Timers Sc reen.)
    — Trunk Group  Ad ministration Sc reen (Timing ) 
    Set the following  timers from the Administrab le Timers sc reen 
    d uring ad ministration of eac h trunk g roup . Selec t the following  CO 
    trunk timer values for this c ountry:
    nInc oming  Disc onnec t: 500 ms 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    372 Saudi Arabia 
    nOutg oing  Disc onnec t: 500 ms
    nOutg oing  Dial Guard : 1600 ms 
    nInc oming  Glare Guard : 1500 ms 
    nOutg oing  Glare Guard : 1500 ms 
    nOutg oing  Dial Pulse Rate (PPS): 10 p p s
    nOutg oing  Rotary Dig it Dial Make: 35 ms
    nOutg oing  Rotary Dig it Dial Break: 65 ms
    nOutg oing  Rotary Dial Interd igit: 800 ms
    nRing  Monitor Timer: 5200 ms
    nInc oming  Seizure: 500 ms
    nOutg oing  End -of-Dial: 10 sec
    nOutg oing  Seizure Resp onse: 240 sec
    nProg rammed  Dial Pause: 1500 ms
    nDisc onnec t Sig nal Error: 240 sec
    nFlash Leng th: 100 ms
    nPPM :  n o
    nDID Trunks
    — Trunk Group  Sc reen
    nGroup  Typ e: DID
    nCountry: 9
    nTrunk Gain: hig h
    nDig it Ab sorp tion List: b lank 
    nInc oming  Dial Typ e: MF
    nTrunk Type: immed -start
    nTrunk Termination: rc  (c omp lex imp ed anc e)
    nDisc onnec t Sup ervision: no
    nDisc onnec t Timing : 500 ms (This field  will not be used  with 
    CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
    Disc onnec t timers. Set these latter two timers from the 
    Ad ministrab le Timers Sc reen.)
    nDig it Treatment: b lank 
    nDig its: b lank 
    nTerminal Balanc ed : yes 
    nExtend ed  Loop  Range: (Used  Only with TN459) no  
    						
    All Lucent Technologies manuals Comments (0)

    Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual