Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual

Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 484
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    113 China 
    nDig ital DID Trunks
    — Trunk Group  sc reen
    nExp ec ted  Dig its: 4 (as neg otiated  with the serving  switc h)
    display trunk-group 1                                    Page   3 of  11   SPE A
                                     TRUNK GROUP
      ADMINISTRABLE TIMERS
        Incoming Disconnect(msec): 500             Outgoing Disconnect(msec): 500
        Incoming Dial Guard(msec): 70              Outgoing Dial Guard(msec): 1600
       Incoming Glare Guard(msec): 1500           Outgoing Glare Guard(msec): 1500
            Ringing Monitor(msec): 5200               Incoming Seizure(msec): 500
        Outgoing End of Dial(sec): 10         Outgoing Seizure Response(sec): 5
      Programmed Dial Pause(msec): 1500
               Flash Length(msec): 540   Incoming Incomplete Dial Alarm(sec): 255
     END TO END SIGNALING
         Tone(msec): 350      Pause(msec): 150
     OUTPULSING INFORMATION
          PPS: 10    Make(msec): 40   Break(msec): 60      PPM? n
                                    TRUNK GROUP
                                      Group Type: did
                                         Country: 11
                                       Auth Code? n
    TRUNK PARAMETERS
                Trunk Type: immed-start      Incoming Rotary Timeout(sec): 5
                                                       Incoming Dial Type: mf
         Trunk Termination: rc                    Disconnect Timing(msec): 500
           Digit Treatment:                                        Digits:
           Expected Digits: 4                           Sig Bit Inversion: none
         Terminal Balanced? n                               RA Trunk Loss: 0db
       Extended Loop Range? n         Trunk Gain: high     Drop Treatment: silence
     Disconnect Supervision - In? y
                                    TRUNK GROUP
     ADMINISTRABLE TIMERS
       Incoming Disconnect(msec): 500
       Incoming Dial Guard(msec): 50
              Flash Length(msec): 100   Incoming Incomplete Dial Alarm(sec): 255 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    114 China 
    Detailed Description for China
    Forced Disconnect
    Forc ed  Disc onnec t allows a network op erator to d isc onnec t a c alled  p arty from a 
    loc al c all and  c onnec t the c alled  p arty to an inc oming  toll c all. Parties on the 
    loc al c all hear a warning  tone b efore d isc onnec t. Forc ed  Disc onnec t is allowed  
    only for c allers on loc al sing le-station c alls. It is ignored b y DEFINITY ECS on 
    c onferenc e, transferred , and  forwarded  c alls. It is also ignored  for c alls to g roup  
    users and  tand em c alls.
    Mode-of-Release Control
    Mod e-of -Release Control inhibits release of a trunk c irc uit when a c aller g oes 
    on-hook, b ased  on c all type and direc tion. Instead  of releasing  the trunk c irc uit, 
    DEFINITY ECS keep s the c irc uit ac tive and  rec onnec ts the c all if the c aller g oes 
    b ac k off-hook. Call typ es for whic h this ap p lies are toll, loc al, or servic e. Direc tion 
    is inc oming  or outg oing . There are three typ es of c ontrol.
    Calling-Party Control
    When Calling -Party Control is ac tive, the trunk is not released  until the c aller g oes 
    on-hook. Several situations may oc c ur.
    nIf the c aller g oes on-hook, the trunk is released  immed iately. The c alled  
    p arty rec eives busy tone.
    nIf the c alled  p arty goes on-hook, the trunk is not released  until the c aller 
    g oes on-hook or the re-answer timer for outg oing  c alls exp ires. The c alled  
    p arty c an re-answer the c all and  talk to the c alling  p arty. See Re-ring on 
    page 115.
    nIf the re-answer timer is ac tivated  and  exp ired , the trunk is released  on 
    outgoing c alls with Calling -Party Control.
    Called-Party Control
    When Called -Party Control is ac tive, the trunk is not released  until the c alled  
    p arty g oes on-hook. Several situations may oc c ur.
    nIf the c alled  p arty goes on-hook, the trunk is released  immed iately. The 
    c aller rec eives b usy tone.
    nIf the c aller g oes on-hook, the trunk is not released until the c alled  p arty 
    g oes on-hook. The c aller c an g o off-hook again to rec onnec t. There is no 
    timer involved  with Called -Party Control.
    First-Party Control
    When First-Party Control is ac tive, the trunk is released  immed iately reg ard less of 
    whether the c aller or c alled  p arty g oes on-hook first. The p arty that is still 
    connec ted receives busy tone. The default or normal Mode-of-Release Control 
    f o r  D EFI N I TY EC S i s Fir s t - Pa r t y  C o n t ro l. 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    115 China 
    Re-ring
    Re-ring  oc c urs for inc oming  c alls to DEFINITY ECS with Calling -Party Control. 
    Basic ally, when the c alled  p arty g oes on-hook, the trunk is not released  and  
    Re-ring  allows the CO op erator to re-ring  the c alled  p arty and  rec onnec t the c all.
    Interactions
    Forced Disconnect
    nConference
    If the network toll c all terminates at a p hone involved  in a c onferenc e, the 
    Forc ed  Disc onnec t sig nal is not sent b y the network.
    nCall Forward ing
    For c alls forward ed on-p remises, on-net, or off-net, the Forc ed Disc onnec t 
    sig nal is not forward ed .
    nGroup  Users
    If a network toll c all terminates to a g roup  user, the Forc ed  Disc onnec t 
    sig nal is not sent b y the network.
    nNon-Station Users
    If a network toll c all terminates to a non-station user, the Forc ed  
    Disc onnec t sig nal is not sent b y the network.
    nTand em Trunks
    DEFINITY ECS d oes not tand em a Forc ed  Disc onnec t sig nal.
    nTransfer
    If a network toll c all is transferred, the Forc ed  Disc onnec t sig nal is not sent 
    by the network.
    Mode-of-Release Control
    nConference
    A c all involved  in a c onferenc e is c hang ed  to First-Party Control as the 
    mod e-of-release c ontrol.
    nFo r w a rd
    A forward ed c all on-p remises, on-net, or off-net is c hang ed  to First-Party 
    Control as the mod e-of-release c ontrol.
    nGroup  Users (Hunt, Trunk, TEG, AUDIX, VDN)
    Calls terminating  to g roup users are c hang ed  to First-Party Control as the 
    mod e-of-release c ontrol. 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    116 China 
    nNon-Station Users (Personal Attend ant, Data-mod ule, Announc ement, 
    Voice Synthesis)
    Calls terminating  to non-station users are c hang ed  to First-Party Control as 
    the mod e-of-release c ontrol.
    nTand em Trunks
    DEFINITY ECS terminates tand em c alls, b ut the mod e-of-release c ontrol is 
    c hang ed  to First-Party Control.
    nTransfer
    A transferred  c all is c hang ed to First-Party Control as the mod e-of-release 
    control.
    Re-ring
    nConference
    A c all involved  in a c onferenc e is c hang ed  to First-Party Control as its 
    mod e-of-release c ontrol. First-Party Control c alls d o not re-ring .
    nCall Forward ing
    For c alls forward ed  on-p remises, on-net, or off-net, Re-ring  sig nals are not 
    forwarded.
    nGroup  Users (Hunt, Trunk, TEG, AUDIX, and  VDN, etc .)
    Re-ring signals sent to group users are ignored by DEFINITY ECS.
    nNon-Station Users (Personal Attend ant, Data-mod ule, Announc ement, 
    Voice Synthesis)
    Re-ring  sig nals sent to non-station users are ignored  b y DEFINITY ECS.
    nTand em Trunks
    DEFINITY ECS d oes not tand em re-ring sig nals.
    nTransfer
    A transferred  c all is c hang ed  to First-Party Control as its mod e-of-release 
    control. First-Party Control calls d o not re-ring . 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    117 Colombia 
    Colombia
    Ta b l e  2 3 shows the rec ommended  c irc uit p ac ks.
    Table 23. Recommended and Available CPs in Colombia 
    Equipment Equipment Type
    Cab inet Typ e & Power GAC-MCC DC-MCC AC-SCC DC-SCC 
    AC-CSCC AC-CMC
    AC Power Voltag e & Freq 120V/50Hz 240V/50Hz
    Ring  Generator 20Hz
    Tone Detec tor > TN2182B > TN744D
    Tone Cloc k > TN2182B
    R2MFC Circ uit
    Sp eec h Synthesizer
    Call Classifier > TN744D
    Announc ement > TN750C 
    Analog  DID Trunk
    Analog  CO Trunk (No PPM) 
    Analog  CO Trunk (w/PPM)
    4 Wire Tie Trunk
    2 Wire Tie Trunk
    Auxiliary Trunk
    Dig ital CO/DID Trunk > TN464F 
    D i g i t a l  Ti e  Tr u n k > TN 4 6 4 F 
    Dig ital PRI CO Trunk > TN464F
    Dig ital BRI Trunk
    Dig ital Converter PRI-DASS   
    Dig ital Converter PRI-DPNSS
    Dig ital Converter PRI-BRI   
    8 Port Analog  Line
    16 Port Analog  Line
    24 Port Analog  Line n/a
    Continued on next page 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    118 Colombia 
    4 Wire Digital Line > TN754B 
    2 Wire Digital Line #TN2224 > TN2181 
    Data Line
    BRI-U Line
    BRI-ST Line
    Ta b l e  2 3 .Recommended and Available CPs in Colombia  — Continued
    Equipment Equipment Type
    Continued on next page 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    119 Costa Rica 
    Costa Rica
    Ta b l e  2 4 shows the rec ommended  c irc uit p ac ks.
    Table 24. Recommended and Available CPs in Costa Rica
    Equipment Equipment Type
    Cab inet Typ e & Power GAC-MCC AC-MCC DC-MCC AC-SCC 
    DC-SCC AC-CSCC AC-CMC
    AC Power Voltag e & Freq 120V/60Hz 240V/60Hz
    Ring  Generator 20Hz
    Tone Detec tor > TN2182B > TN744D TN748D TN748C 
    Tone Cloc k > TN2182B TN780 TN768
    R2MFC Circ uit
    Sp eec h Synthesizer > TN725B
    Call Classifier > TN744D
    Announc ement > TN750C TN750B 
    Analog  DID Trunk
    Analog  CO Trunk (No PPM) > TN747B
    Analog  CO Trunk (w/PPM)
    4 Wire Tie Trunk > TN760D
    2 Wire Tie Trunk
    Auxiliary Trunk > TN763D 
    Dig ital CO/DID Trunk > TN464F TN464E TN464D TN464C
    Dig ital Tie Trunk > TN464F TN464E TN464D TN464C
    Dig ital ISDN CO Trunk
    Dig ital BRI Trunk
    Dig ital Converter PRI-DASS   
    Dig ital Converter PRI-DPNSS
    Dig ital Converter PRI-BRI   
    8 Port Analog  Line
    16 Port Analog  Line > TN746B
    24 Port Analog  Line n/a
    Continued on next page 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    120 Costa Rica 
    Feature Administration
    The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e 
    ap p roval was award ed . The sc reens may have c hang ed  sinc e that d ate.
    nARS/AAR Ad ministration
    To enab le ARS administration, on the System-Parameters Customer-Op tions 
    sc reen, set the ARS
     field  to y
    . You also should c hec k all ARS/AAR d efaults. All 
    default ARS analysis codes are deleted before dialed strings are added for 
    routing when DEFINITY is installed  outsid e of North Americ a. Be aware that the 
    d efault for the 10 dig its c ause d ialing  p rob lems. In p artic ular, the following  c all 
    types (ap pear as ARS/AAR d efaults) typ ic ally are not used  in non-North 
    Americ an ARS/AAR tab les:
    Luc ent rec ommend s only the following  c all typ es b e used  outside North 
    Americ a: 4 Wire Digital Line > TN754B 
    2 Wire Digital Line > TN2224 TN2181 
    Data Line > TN726B 
    BRI-U Line
    BRI-ST Line  TN556B
    fnpa: North Americ an numbers with an area code.
    hnpa: North Americ an numbers without an area code.
    svc: North Americ an numbers of the sc reen ‘‘x11’’.
    int: For all international numb ers.
    natl: For all national PN numbers.
    p ub u: For all other external (that is, not extensions) numb ers.
    Ta b l e  2 4 .Recommended and Available CPs in Costa Rica — Continued
    Equipment Equipment Type
    Continued on next page 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    121 Costa Rica 
    System Parameter Administration
    Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
    c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
    Feature-Related System Parameters
                                                                     Page   1 of  6
                            FEATURE-RELATED SYSTEM PARAMETERS
                                    Trunk-to-Trunk Transfer: all
       Coverage - Subsequent Redirection No Answer Interval: 2
              Coverage - Caller Response Interval (seconds): 4
                            Keep Held SBA at Coverage Point? y
    Automatic Callback - No Answer Timeout Interval (rings): 7
                       Call Park Timeout Interval (minutes): 10
        Off-Premises Tone Detect Timeout Interval (seconds): 20
                                 AAR/ARS Dial Tone Required? y
                                         Music/Tone on Hold: none
              Music (or Silence) on Transferred Trunk Calls? no
                           DID/Tie/ISDN Intercept Treatment: attd
     Internal Automatic Answer for Attendant Extended Calls? n
                  Automatic Circuit Assurance (ACA) Enabled? n
                                                                    Page   2 of  6
                                FEATURE-RELATED SYSTEM PARAMETERS
    LEAVE WORD CALLING PARAMETERS
      Maximum Number of Messages Per Station (when MSA not in service):20
      Stations with System-wide Retrieval Permission (enter extension)
      1:          2:          3:          4:          5:
      6:          7:          8:          9:         10:
      WARNING!    SEE USER DOCUMENTATION BEFORE CHANGING TTI STATE 
                    Terminal Translation Initialization (TTI) Enabled? n
           External Coverage Treatment for Transferred Incoming Calls? n
    SECURITY VIOLATION NOTIFICATION (SVN) PARAMETERS HAVE MOVED TO
    THE SYSTEM-PARAMETERS SECURITY SCREEN 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    122 Costa Rica 
                                                                     Page   3 of  6
                             FEATURE-RELATED SYSTEM PARAMETERS
                         Reserved Slots for Attendant Priority Queue: 5
                                          Time before Off-hook Alert: 10
                              Emergency Access Redirection Extension: 
                                      Service Observing Warning Tone? y
                Number of Emergency Calls Allowed in Attendant Queue: 5
                                                Call Pickup Alerting? n
                   Deluxe Paging and Call Park Timeout to Originator? n
          Controlled Outward Restriction Intercept Treatment: tone
         Controlled Termination Restriction (Do Not Disturb): tone
                   Controlled Station to Station Restriction: tone
    AUTHORIZATION CODE PARAMETERS        Authorization Codes Enabled?
                                           Authorization Code Length:
                              Authorization Code Cancellation Symbol: #
                                             Attendant Time Out Flag? n
                                          Display Authorization Code? n
                                                                     Page   4 of  6
                              FEATURE-RELATED SYSTEM PARAMETERS
    SYSTEM PRINTER PARAMETERS
                 System Printer Extension:                      Lines Per Page: 60
    SYSTEM-WIDE PARAMETERS
                              Switch Name:
    CALL CENTER SYSTEM PARAMETERS
      Direct Agent Announcement Extension:
                                               Direct Agent Announcement Delay: 
                                               Converse Delay  Data1: 0  Data2: 2
       Direct Agent Announcement Extension:        Converse Pulse ON: 100  OFF: 70
                                                      Prompting Timeout (secs): 10
    CALL MANAGEMENT SYSTEM PARAMETERS
            BCMS/VuStats Measurement Interval: hour
    BCMS/VuStats Abandon Call Timer (seconds):              Validate Login IDs? n
              ACD Login Identification Length:             Adjunct CMS Release:
    MALICIOUS CALL TRACE PARAMETERS
                   Apply MCT Warning Tone? n    MCT Voice Recorder Trunk Group: 
    						
    All Lucent Technologies manuals Comments (0)

    Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual