Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
353 Poland 
nId le Cod e: 01010100 
— Trunk Group  Ad ministration Sc reen (Timing ) Dig ital trunk timing  
values should  b e set as for analog CO trunks.
nDID Trunks
— DS1 Ad ministration Sc reen
nCirc uit Pac k: TN464D (not entered as an ad ministrab le item)
nBit Rate: 2.048
nInterfac e Comp anding : A-law
nLine Cod ing: HDB3
nSignaling Mode: CAS
nCountry Protoc ol: 
nInterc onnec t: CO
nCRC?: No
nId le Cod e: 01010100 
— Trunk Group  Ad ministration Sc reen (Timing )
Dig ital trunk timing  values should  b e set as for analog  DID trunks.
nTi e  Tru n k s
— Non-ISDN Sig naling  Examp le (DS1 Ad ministration Sc reen)
nCirc uit Pac k: TN464D (Not entered  as ad ministrab le item; 
TN464C from up g rad es)
nBit Rate: 2.048
nInterfac e Comp anding : A-law
nLine Cod ing: HDB3
nSignaling Mode: CAS
nCountry Protoc ol: 
nInterc onnec t: p b x
nCRC?: no
nId le Cod e: 01010100 
— ISDN-PRI (Private Network) Sig naling 
This examp le assumes use of US Op tion 1 with fac ility assoc iated  
sig naling . Other feature op tions will req uire c hang es in one or more 
ad ministered  items.
nDS1 Ad ministration sc reen
— Circ uit Pac k: TN464D (or TN464C from up g rad es)
— Bit Rate: 2.048 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
354 Poland 
— Interfac e Comp anding : A-law
— Line Cod ing: HDB3
— Sig naling  Mod e: isd n-p ri
— Country Protoc ol: 1
— Connec t: p b x
— Interfac e: user 
—CRC: No
— Id le Cod e: 01010100 
nSignaling Group screen
— Assoc iated Sig naling : Yes
— Primary D_Channel: xxxx16 (xxxx= > dep end s on CP 
p hysical location)
nTrunk Group  Ad ministration sc reen
— Group Type: isdn-pri
— Servic e Typ e: tie
— ISDN-PRI (Public  Network) Not available for this c ountry. 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
355 Republic of Korea 
Republic of Korea
Ta b l e  4 8 shows the rec ommended  c irc uit p ac ks.
Table 48. Recommended and Available CPs in Republic of Korea
Equipment Equipment Type
Cab inet Typ e & Power GAC-MCC DC-MCC AC-SCC DC-SCC 
AC-CMC
AC Power Voltag e & Freq 110V/60Hz 220V/60Hz
Ring Generator 20Hz
Tone Detec tor > TN2182B > TN744D
Tone Cloc k > TN2182B TN780 
R2MFC Circ uit TN744D
Sp eec h Synthesizer > TN725B 
Call Classifier > TN744D
Announc ement TN750C TN750B TN750
Analog  DID Trunk > TN753
Analog  CO Trunk (No PPM)  TN747B TN2147C TN2147
Analog  CO Trunk (w/PPM) n/a
4 Wire Tie Trunk > TN760
2 Wire Tie Trunk TN439
Auxiliary Trunk > TN763D 
Dig ital CO/DID Trunk > TN2464
Dig ital Tie Trunk > TN2464
Dig ital PRI CO Trunk TN2464
Dig ital BRI Trunk > TN2185
Dig ital Converter PRI-DASS    n/a
Dig ital Converter PRI-DPNSS n/a
Dig ital Converter PRI-BRI    n/a
8 Port Analog  Line TN746B
16 Port Analog  Line #TN791 TN479
24 Port Analog  Line n/a
Continued on next page 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
356 Republic of Korea 
4 Wire Digital Line > TN754C
2 Wire Digital Line #TN2214 > TN2181 
Data Line > TN726B 
BRI-U Line TN2198
BRI-ST Line TN556B
Table 48. Recommended and Available CPs in Republic of Korea
Equipment Equipment Type
Continued on next page 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
357 Russia 
Russia
Ta b l e  4 9 shows the rec ommended  c irc uit p ac ks.
Table 49. Recommended and Available CPs in Russia
Equipment Equipment Type
Cab inet Typ e & Power GAC-MCC DC-MCC AC-SCC DC-SCC 
AC-CSCC AC-CMC
AC Power Voltag e & Freq 220V/50Hz 
Ring  Generator 20Hz
Tone Detec tor #TN2182B > TN744D TN420C 
Tone Cloc k #TN2182B > TN780
R2MFC Circ uit > TN744D TN744Bv2
Sp eec h Synthesizer > TN457 
Call Classifier > TN744D
Announc ement TN750C TN750B 
Analog  DID Trunk > TN753v17 > TN2199
Analog  CO Trunk (No PPM)  > TN747Bv12 > TN2199
Analog  CO Trunk (w/PPM) #TN465C > TN465B TN465
4 Wire Tie Trunk > TN760Dv11
2 Wire Tie Trunk
Auxiliary Trunk > TN763D 
Dig ital CO/DID Trunk > TN464F 
D i g i t a l  Ti e  Tr u n k > TN 4 6 4 F 
Dig ital PRI CO Trunk n/a 
Dig ital BRI Trunk
Dig ital Converter PRI-DASS   
Dig ital Converter PRI-DPNSS
Dig ital Converter PRI-BRI   
8 Port Analog  Line n/a
16 Port Analog  Line > TN746B
24 Port Analog  Line n/a
Continued on next page 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
358 Russia 
Country-Specific Features
When the Country Code field  is 15, Russia Multifreq uenc y Shuttle sig naling  c an 
b e enab led  on CO, DID and  DIOD trunk g roup s. ANI transmission, whic h uses 
g ap less R1 multifreq uenc y sig naling and  is c ompleted  within 800ms, c an b e 
ad ministered  on outg oing  CO trunk g roup s. See “ Trunk Group  Ad ministration”  in 
the DEFINITY ECS Ad ministration and  Feature Desc rip tion.
When the Country Code field  is 15 and  the Protoc ol Typ e field  is intol
, the new 
features Intrusion and Re-ring  are enab led .
On DID and  DIOD trunks, when the Country field  is 15, the ANI Req uest feature 
can be enabled when, on the Trunk Group screen, the Protocol Type field is 
inloc
. The ANI is req uested  on rotary and shuttle trunks if the inc oming  c all is 
p roc essed  throug h the ARS/AAR d ig it analysis (or d ig it c onversion). The ANI 
Req uest feature c an b e invoked  either automatic ally (via ARS/AAR) or b y the 
user d uring  the voic e state of a c all b y p ressing  the 
ani-requ b utton ad ministered  
on their p hone.
Feature Administration
The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e 
ap p roval was award ed . The sc reens may have c hang ed  sinc e that d ate.
Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
nARS/AAR Ad ministration
To enab le ARS administration, on the System-Parameters 
Customer-Op tions sc reen, set the ARS
 field  to y
. You also should check all 
ARS/AAR d efaults. All d efault ARS analysis c odes are deleted  b efore 
d ialed  strings are ad d ed for routing when DEFINITY is installed  outsid e of  4 Wire Digital Line > TN754B 
2 Wire Digital Line #TN2224 > TN2181 TN2136
Data Line > TN726B 
BRI-U Line
BRI-ST Line
Ta b l e  4 9 .Recommended and Available CPs in Russia — Continued
Equipment Equipment Type
Continued on next page 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
359 Russia 
North Americ a. Be aware that the d efault for the 10 d ig its c ause dialing 
p rob lems. In p artic ular, the following  c all typ es (ap pear as ARS/AAR 
d efaults) typ ic ally are not used  in non-North Americ an ARS/AAR tab les:
Luc ent rec ommend s only the following  c all typ es b e used  outside North 
Americ a:
nANI Transmission
In ord er to use ANI transmission, ARS must b e used . If the ANI req uested  
sig nal is exp ec ted  at a c ertain p oint in the d ig it string  d uring  d ialing , the 
symb ol & should  b e translated  in the routing  p attern at that p oint.
nANI Req uest via ARS/AAR
In ord er to ac tivate the ANI Req uest feature, on the AAR/ARS Dig it 
Analysis Tab le (Dig it Conversion Tab le) sc reen, set the Ani Reqd  field  to y
 
or r
.
NOTE:
If the op tion r
 is selec ted , the ANI is req uested  on the inc oming  trunk 
(rotary, shuttle, or R2_MFC) and  if for any reason is not rec eived , the 
incoming call drops.
NOTE:
The capability of dropping the incoming call applies also for ISDN 
c alls if the CPN is not rec eived  and :
— on the System Parameter Country-Op tions sc reen, the value 
of the Base Tone Generator field  is 15.
— the c all is p roc essed  throug h the AAR/ARS Dig it Analysis 
Tab le (or Digit Conversion Tab le) sc reen and  the ANI Req d  
field  is r
.
Th e  v a l u e  r
 for the ANI Req d  field  is availab le only if, on the 
Feature-Related System-Parameters sc reen, the Allow ANI Restric tion on 
AAR/ARS field  is y.fnp a: North Americ an numb ers with an area c od e.
hnp a: North Americ an numb ers without an area c od e.
svc : North Americ an numb ers of the sc reen ‘‘x11’’.
int: For all international numbers.
natl: For all national PN numb ers.
pubu: For all other external (that is, not extensions) numbers. 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
360 Russia 
nANI Request via Feature Button
In ord er to ac tivate the ANI Req uest feature via b utton, the user must have 
the 
ani-req u b utton ad ministered on their phone. The ANI d isp lays on their 
p hone only if the user has the 
mc t-c ontr b utton ad ministered .
System Parameter Administration
Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
n Feature-Related  System Parameters Ad ministration
— Trunk-to-Trunk Transfer: Permitted  b y c ountry’s reg ulations - 
Selec tion is c ustomer’s c hoic e.
— Pub lic  Network Trunks on Conferenc e Call: 5
— Conferenc e Parties With PNTs: 6
— Conferenc e Parties Without PNTs: 6
— Line Interc ep t Tone Timer: 30
— Nig ht Servic e Disc onnec t Timer: 180 sec
— Short Interd ig it Timer: 3 sec
— Unanswered  DID Call Timer: 60 
—Auto-Hold: Yes 
18
— Attend ant Tone: Yes
— Bridg ing  Tone: No
— Conferenc e Tone: No
— Intrusion Tone: Yes
— Allow ANI Restric tion on AAR/ARS: Yes
— Rep etitive Call Waiting Tone: No
— DID Busy Treatment: Attend ant
— Pull Transfer: No
— Level of Tone Detec tion: Med ium
— Outp ulse Without Tone: Yes
— (Station-to-switc h) Rec all Timing :
nFlashhook Interval: No 
nDisc onnec t Timing : 350 ms
— Station Tone Forward  Disc onnec t: Busy
18. Althoug h not a Type App roval issue, this rep resents the convention for this country. 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
361 Russia 
— Network Feed b ac k: No
nClass of Restric tion Ad ministration
— Categ ory For C.I.S. ANI: 7
nSystem Parameter Country Op tions Ad ministration
— Comp and ing  Mode: A-law
— Base Tone Generation Set: 15 
— Tone Detec tion Mod e: 4
— Interd ig it Pause: short
— Dig ital Loss Plan: 15 
— Analog  Ring ing  Cad enc e: 15 
Analog Trunk Administration
nCO Trunks
— Trunk Group  Sc reen
nGroup  Typ e: CO 
nCountry: 15
nTrunk Gain: hig h
nDirection: outgoing 
nDig it Ab sorp tion List: b lank 
nPre f i x -1 :  N o
nTrunk Type: loop -start 
nOutg oing  Dial Typ e: rotary 
nTrunk Termination: 600 ohm
nAuto Guard : no 
nDial Ac c ess: Yes
nCall Still Held : no 
nTerminal Balanc ed : yes 
nRec eive Answer Sup ervision: yes 
nAnswer Sup ervision Timeout: 0 (This sets b oth the CP 
firmware timer and  software timer. Set to 0 for any trunk that 
will rec eive answer sup ervision.)
nDisc onnec t Sup ervision - In: yes
nDisc onnec t Sup ervision - Out: Selec tion is c ustomer’s 
choice. 
						

							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
362 Russia 
nDisc onnec t Timing : 500 msec  (This field  will not b e used  with 
CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
Disc onnec t timers. Set these latter two timers from the 
Ad ministrab le Timers Sc reen.)
— Trunk Group  Ad ministration Sc reen (Timing )
Set the following  timers from the Administrab le Timers sc reen 
d uring ad ministration of eac h trunk g roup . Selec t the following  CO 
trunk timer values for this c ountry:
nInc oming  Disc onnec t: 200 ms
nOutg oing  Disc onnec t: 200 ms
nOutg oing  Dial Guard : 100 ms 
nInc oming  Glare Guard : 1500 ms 
nOutg oing  Glare Guard : No effec t
nOutg oing  Dial Pulse Rate (PPS): 10 p p s
nOutg oing  Rotary Dig it Dial Make: 50 ms
nOutg oing  Rotary Dig it Dial Break: 50 ms
nOutg oing  Rotary Dial Interd igit: 700 ms
nRing  Monitor Timer: No effec t
nInc oming  Seizure: No effec t
nOutg oing  End -of-Dial: 254 sec
nOutg oing  Seizure: 200 ms
nProg rammed  Dial Pause: 5000 ms
nDisc onnec t Sig nal Error: 60 sec
nEnd -To-End  Sig naling  Pause: 150 ms (ac c ep t d efault)
nEnd -To-End  Sig naling  Tone: 350 ms (ac c ep t d efault)
nFlash Leng th: No effec t
nOutg oing  Seizure Resp onse: No effec t
nPPM :  N o
nOutp ulsing  Make: 50 ms
nOutp ulsing  Break: 50 ms
— Trunk Group  Ad ministration Features Sc reen
To ad minister Multifreq uenc y Shuttle, selec t the following values:
nShuttle: yes
nStart Position: 1
nDID Trunks