Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual
Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual
Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 343 Philippines Philippines Ta b l e 4 6 shows the rec ommended c irc uit p ac ks. Table 46. Recommended and Available CPs in Philippines Equipment Equipment Type Cab inet Typ e & Power GAC-MCC DC-MCC AC-SCC DC-SCC AC-CMC AC Power Voltag e & Freq 220V/60Hz Ring Generator 20Hz/25Hz Tone Detec tor > TN2182B > TN748D Tone Cloc k > TN2182B R2MFC Circ uit TN744D Sp eec h Synthesizer > TN457 Call Classifier > TN744D Announc ement TN750B Analog DID Trunk > TN753 Analog CO Trunk (No PPM) TN747B Analog CO Trunk (w/PPM) n/a 4 Wire Tie Trunk > TN760D 2 Wire Tie Trunk n/a Auxiliary Trunk > TN763D TN763C Dig ital CO/DID Trunk > TN2464 Dig ital Tie Trunk > TN2464 Dig ital PRI CO Trunk TN2464 Dig ital BRI Trunk > TN2185 Dig ital Converter PRI-DASS n/a Dig ital Converter PRI-DPNSS TN-CCSC-2 Dig ital Converter PRI-BRI n/a 8 Port Analog Line n/a 16 Port Analog Line #TN746B 24 Port Analog Line TN2793 Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 344 Philippines 4 Wire Digital Line > TN754B 2 Wire Digital Line > TN2181 Data Line > TN726B BRI-U Line TN2198 BRI-ST Line TN556 Table 46. Recommended and Available CPs in Philippines Equipment Equipment Type Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 345 Poland Poland The information p rovid ed here is p reliminary and sub jec t to c hang e. Ta b l e 4 7 shows the rec ommend ed c irc uit p ac ks. Table 47. Recommended and Available CPs in Poland Equipment Equipment Type Cab inet Typ e & Power GAC-MCC AC-SCC AC-CSCC AC-CMC AC Power Voltag e & Freq 220V/50Hz Ring Generator 20Hz Tone Detec tor > TN2182B > TN744D TN748D TN748C Tone Cloc k > TN2182B TN780 TN756 R2MFC Circ uit > TN744D TN744B Sp eec h Synthesizer > TN725B Call Classifier > TN744D Announc ement TN750C TN750B Analog DID Trunk > TN753 Analog CO Trunk (No PPM) > TN747B Analog CO Trunk (w/PPM) 4 Wire Tie Trunk > TN760D 2 Wire Tie Trunk Auxiliary Trunk > TN763D Dig ital CO/DID Trunk Dig ital Tie Trunk > TN464F TN464E TN464D Dig ital PRI CO Trunk n/a Dig ital BRI Trunk > TN2185 Dig ital Converter PRI-DASS Dig ital Converter PRI-DPNSS Dig ital Converter PRI-BRI 8 Port Analog Line TN742 16 Port Analog Line > TN746B 24 Port Analog Line n/a Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 346 Poland NOTE: A-law c ompand ing is the national stand ard in Poland . However, Mu-law is used internally to the system for servic e c irc uits and analog lines. Network interfac es are c onfig ured as A-law if req uired . Feature Administration The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e ap p roval was award ed . The sc reens may have c hang ed sinc e that d ate. Only those feature-related p arameters that may have a Typ e Ap p roval or b asic c onnec tivity imp lic ation for a p artic ular c ountry are listed here. nARS/AAR Ad ministration To enab le ARS administration, on the System-Parameters Customer-Op tions sc reen, set the ARS field to y . You also should check all ARS/AAR d efaults. All d efault ARS analysis c odes are deleted b efore d ialed strings are ad d ed for routing when DEFINITY is installed outsid e of North Americ a. Be aware that the d efault for the 10 d ig its c ause dialing p rob lems. In p artic ular, the following c all typ es (ap pear as ARS/AAR d efaults) typ ic ally are not used in non-North Americ an ARS/AAR tab les: 4 Wire Digital Line > TN754B 2 Wire Digital Line #TN2224 > TN2181 TN2136 Data Line > TN726B BRI-U Line BRI-ST Line fnpa: North Americ an numbers with an area code. hnpa: North Americ an numbers without an area code. svc: North Americ an numbers of the sc reen ‘‘x11’’. Ta b l e 4 7 .Recommended and Available CPs in Poland — Continued Equipment Equipment Type Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 347 Poland Luc ent rec ommend s only the following c all typ es b e used outside North Americ a: System Parameter Administration Only those feature-related p arameters that may have a Typ e Ap p roval or b asic c onnec tivity imp lic ation for a p artic ular c ountry are listed here. nFeature-Related System Parameters Ad ministration — Trunk-to-Trunk Transfer: Permitted b y c ountry’s reg ulations - Selec tion is c ustomer’s c hoic e. — Pub lic Network Trunks on Conferenc e Call: 5 — Conferenc e Parties With PNTs: 6 — Conferenc e Parties Without PNTs: 6 — Line Interc ep t Tone Timer: 30 — Nig ht Servic e Disc onnec t Timer: 180 sec — Short Interd ig it Timer: 3 sec — Unanswered DID Call Timer: 60 —Auto-Hold: Yes 16 — Attend ant Tone: Yes — Bridg ing Tone: No — Conferenc e Tone: No — Intrusion Tone: Yes — Rep etitive Call Waiting Tone: No — DID Busy Treatment: Attend ant — Pull Transfer: No — Level of Tone Detec tion: Med ium — Outp ulse Without Tone: Yes — (Station-to-switc h) Rec all Timing : nFlashhook Interval: Yes int: For all international numb ers. natl: For all national PN numb ers. p ub u: For all other external (that is, not extensions) numb ers. 16. Althoug h not a Type App roval issue, this rep resents the convention for this country.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 348 Poland nUp p er Bound : 1100 msec nLower Bound : 600 msec n System Parameter Multifreq uenc y Sig naling Ad ministration — Incoming Call Type: group-ii-mfc — Outgoing Call Type: group-ii-mfc — Test Call Extension: Ac c ept d efault — Inc oming Interd ig it Timer: Ac c ep t default — Inc oming Sig nal Types: GROUP-I GROUP-II GROUP-A GROUP-B 11: ig nored 12: ig nored 13: ig nored 14: ig nored 15: end -of-d ial1: normal 2: normal 3: normal 4: normal 5: normal 6: d ata-c all 7: normal 8: d ata-c all 9: normal 10: normal 11: normal 12: normal 13: normal 14: normal 15: normal1: next-d ig it 3: end -of-d ial 4: c ong estion3: b usy 4: congestion 5: interc ep t 6: free
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 349 Poland — Outgoing Signal Types: nSystem Parameters Country Op tions — Comp and ing Mode: A-law NOTE: Comp and ing Mod e: A-law is the national stand ard . Mu-law is used internal to the system for servic e c irc uits and analog lines. Network interfac es are c onfig ured as A-law if req uired . — Base Tone Generation Set: — Tone Detec tion Mod e: 5 — Interd ig it Pause: short — Dig ital Loss Plan: — Analog Ringing Cadence: GROUP-I GROUP-II GROUP-A GROUP-B 15: end -of-d ial 1: normal 1: attend ant 6: d ata-c all1: next-d ig it 2: last-d igit 3: end -of-d ial 4: c ong estion 5: c all-info-ani 6: setup-sp p ath 7: last-2-d igits 8: last-3-d igits 9: c ong estion 10: c ong estion 11: c ong estion 12: c ong estion 13: c ong estion 14: c ong estion 15: c ong estion1: free 2: b usy 3: b usy 4: congestion 5: congestion 6: free 7: interc ep t 8: congestion 9: congestion 10: c ong estion 11: c ong estion 12: c ong estion 13: c ong estion 14: c ong estion 15: c ong estion
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 350 Poland Analog Trunk Administration nCO Trunks — Trunk Group Sc reen nGroup Typ e: CO nCountry: nTrunk Gain: hig h nDirec tion: two-way nDig it Ab sorp tion List: b lank nPre f i x -1 : N o nTrunk Type: loop -start nOutg oing Dial Typ e: tone/rotary nTrunk Termination: 600 ohm nAuto Guard : No nDial Ac c ess: No nCall Still Held : No nTerminal Balanc ed : Yes nRec eive Answer Sup ervision: yes nAnswer Supervision Timeout: 10 (This sets both the CP firmware timer and software timer. Set to 0 for any trunk that will rec eive answer sup ervision.) nDisc onnec t Sup ervision - In: no nDisc onnec t Sup ervision - Out: Selec tion is c ustomer’s choice. nDisc onnec t Timing: 500 msec or 1000 msec - 1000 msec for p ub lic trunk with flash. (This field will not b e used with CPs that c an ac c ep t the Inc oming Disc onnec t and Outg oing Disc onnec t timers. Set these latter two timers from the Ad ministrab le Timers Sc reen.) — Trunk Group Ad ministration Sc reen (Timing ) Set the following timers from the Administrab le Timers sc reen d uring ad ministration of eac h trunk g roup . Selec t the following CO trunk timer values for this c ountry: nInc oming Disc onnec t: 500 msec or 1000 msec nOutg oing Disc onnec t: 500 msec or 1000 msec nOutg oing Dial Guard : 1600 ms nInc oming Glare Guard : 1500 ms
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 351 Poland nOutg oing Glare Guard : 1500 ms nOutg oing Dial Pulse Rate (PPS): 10 p p s nOutg oing Rotary Dig it Dial Make: 35 ms nOutg oing Rotary Dig it Dial Break: 65 ms nOutg oing Rotary Dial Interd igit: 800 ms nRing Monitor Timer: 5200 ms nInc oming Seizure: 500 ms nOutg oing End -of-Dial: 255 sec nOutg oing Seizure Resp onse: 0 nProg rammed Dial Pause: 1500 ms nDisc onnec t Sig nal Error: 240 sec nEnd -To-End Sig naling Pause: 150 ms (ac c ep t d efault) nEnd -To-End Sig naling Tone: 350 ms (ac c ep t d efault) nFlash Leng th: 100 ms nPPM : N o n DID Trunks — Trunk Group Sc reen nGroup Typ e: DID nCountry: nTrunk Gain: hig h nDig it Ab sorp tion List: b lank nInc oming Dial Typ e: rotary or mf NOTE: It is very imp ortant to have DID trunk over DS1 with rotary! nTrunk Type: immed -start nTrunk Termination: rc (c omp lex imp ed anc e) nDisc onnec t Sup ervision: no nDisc onnec t Timing : 500 msec (This field will not b e used with CPs that c an ac c ep t the Inc oming Disc onnec t and Outg oing Disc onnec t timers. Set these latter two timers from the Ad ministrab le Timers Sc reen.) nDig it Treatment: b lank nDig its: b lank
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 352 Poland nExp ec ted Dig its: d ep end s on system size and numb ering plan nTerminal Balanc ed : yes nExtend ed Loop Range: (Used Only with TN459) no nDrop Treatment: silenc e nInc oming Rotary Timeout (sec ): 5 sec (This field will not b e used with CPs that c an ac c ept the Inc oming Partial Dial timer. Set this timer from the Ad ministrab le Timers Sc reen.) — Trunk Group Ad ministration Sc reen (Timing ) Set the following timers from the Administrab le Timers sc reen d uring ad ministration of eac h trunk g roup . Selec t the following DID trunk timer values for this c ountry: nInc oming Disc onnec t: 100 ms nInc oming Dial Guard : 10 ms nInc oming Partial Dial: 18 sec nInc oming Inc omplete Dial: 255 sec nTi e Tru n k s No information regard ing Typ e App roval-related setting s is c urrently availab le. Digital Trunk Administration Not all p ossib le valid ad ministrab le c omb inations are listed in this sec tion: Only the most c ommon or stand ard c ombination, c omp atib le with p ub lic -network and Typ e Ap proval stand ard s for eac h c ountry is presented : nCO Trunks — DS1 Ad ministration Sc reen 17 nCirc uit Pac k: TN464D (not entered as an ad ministrab le item) nBit Rate: 2.048 nInterfac e Comp anding : A-law nLine Cod ing: HDB3 nSignaling Mode: CAS nCountry Protoc ol: nInterc onnec t: CO nCRC?: No 17. DS1 is also analog ous to the term E1 that has b een c oined for the European T1 or 2 mb it interfac e.