Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual
Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual
Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 403 South Africa Feature Administration The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e ap p roval was award ed . The sc reens may have c hang ed sinc e that d ate. Only those feature-related p arameters that may have a Typ e Ap p roval or b asic c onnec tivity imp lic ation for a p artic ular c ountry are listed here. nARS/AAR Ad ministration To enab le ARS administration, on the System-Parameters Customer-Op tions sc reen, set the ARS field to y . You also should check all ARS/AAR d efaults. All d efault ARS analysis c odes are deleted b efore d ialed strings are ad d ed for routing when DEFINITY is installed outsid e of North Americ a. Be aware that the d efault for the 10 d ig its c ause dialing p rob lems. In p artic ular, the following c all typ es (ap pear as ARS/AAR d efaults) typ ic ally are not used in non-North Americ an ARS/AAR tab les: Luc ent rec ommend s only the following c all typ es b e used outside North Americ a: 4 Wire Digital Line > TN754B 2 Wire Digital Line #TN2224 > TN2181 Data Line > TN726B BRI-U Line BRI-ST Line fnp a: North Americ an numb ers with an area c od e. hnp a: North Americ an numb ers without an area c od e. svc : North Americ an numb ers of the screen ‘‘x11’’. int: For all international numbers. natl: For all national PN numb ers. pubu: For all other external (that is, not extensions) numbers. Ta b l e 5 3 .Recommended and Available CPs in South Africa — Continued Equipment Equipment Type Continued on next page
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
404 South Africa
System Parameter Administration
Only those feature-related p arameters that may have a Typ e Ap p roval or b asic
c onnec tivity imp lic ation for a p artic ular c ountry are listed here.
nFeature-Related System Parameters Ad ministration
change system-parameters features Page 1 of 6
FEATURE-RELATED SYSTEM PARAMETERS
Trunk-to-Trunk Transfer: none
Coverage Subsequent Redirection No Answer Interval: 2
Coverage - Caller Response Interval (seconds): 4
Keep Held SBA at Coverage Point? y
Automatic Callback - No Answer Timeout Interval (rings): 3
Call Park Timeout Interval (minutes): 10
Off-Premises Tone Detect Timeout Interval (seconds): 20
AAR/ARS Dial Tone Required? y
Music/Tone on Hold: none
Music (or Silence) on Transferred Trunk Calls? no
DID/Tie/ISDN Intercept Treatment: 2500
Messaging Service Adjunct (MSA) Connected? n
Internal Automatic Answer for Attendant Extended Calls? n
Automatic Circuit Assurance (ACA) Enabled? n
change system-parameters features Page 2 of 6
FEATURE-RELATED SYSTEM PARAMETERS
LEAVE WORD CALLING PARAMETERS
Maximum Number of Messages Per Station (when MSA not in service): 10
Stations with System-wide Retrieval Permission (enter extension)
1: 3: 5: 7: 9:
2: 4: 6: 8: 10:
WARNING: SEE USER DOCUMENTATION BEFORE CHANGING TTI STATE
Terminal Translation Initialization (TTI) Enables? n
SECURITY VIOLATION NOTIFICATION (SVN) PARAMETERS HAVE MOVED TO
THE SYSTEM-PARAMETERS SECURITY SCREEN
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
405 South Africa
change system-parameters features Page 3 of 6
FEATURE-RELATED SYSTEM PARAMETERS
Reserved Slots for Attendant Priority Queue: 5
Time before Off-hook Alert: 10
Emergency Access Redirection Extension:
Service Observing Warning Tone? y
Call Pickup Alerting? y
Deluxe Paging and Call Park Timeout to Originator? n
Controlled Outward Restriction Intercept Treatment: tone
Controlled Termination Restriction (Do Not Disturb): tone
Controlled Station to Station Restriction : tone
AUTHORIZATION CODE PARAMETERS Authorization Codes Enabled: n
change system-parameters features Page 4 of 6
FEATURE-RELATED SYSTEM PARAMETERS
SYSTEM PRINTER PARAMETERS
System Printer Extension Lines Per Page: 60
EIA Device Bit Rate: 9600
SYSTEM-WIDE PARAMETERS
Switch Name:
CALL CENTER SYSTEM PARAMETERS
Direct Agent Announcement Delay:
Converse First Data Delay: 0
Direct Agent Announcement Extension: Converse Second Data Delay: 2
CALL MANAGEMENT SYSTEM PARAMETERS
BCMS Measurement Interval: hour
BCMS/VuStats Abandon Call Timer (seconds):
ACD Login Identification Length: 0 Adjunct CMS Release:
MALICIOUS CALL TRACE PARAMETERS
Apply MCT Warning Tone? n MCT Voice Recorder Trunk Group:
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
406 South Africa
nSystem Parameter Multifreq uenc y Sig naling Ad ministration
— Incoming Call Type: group-ii-mfc
— Outgoing Call Type: group-ii-mfc
— Maintenanc e Call Typ e: none
— Test Call Extension: Ac c ept d efault
— Interdigit Timer (sec): 15
— Outg oing Forward Signal Present Timer (sec ): 20
system-parameters features Page 5 of 6
FEATURE-RELATED SYSTEM PARAMETERS
Public Network Trunks on Conference Call: 1
Conference Parties with Public Network Trunks: 3
Conference Parties without Public Network Trunks: 6
Night Service Disconnect Timer (seconds): 180
Short Interdigit Timer (seconds): 3
Unanswered DID Call Timer (seconds):
Line Intercept Tone Timer (seconds): 30
Auto Start? y
Auto Hold? y
Attendant Tone? y
Bridging Tone? y
Conference Tone? n
Intrusion Tone? y
DID Busy Treatment: tone
DISTINCTIVE AUDIBLE ALERTING
Internal: 2 External: 2 Priority: 3
display system-parameters features Page 6 of 6
FEATURE-RELATED SYSTEM PARAMETERS
Pull Transfer: n
Level Of Tone Detection: medium
Wait Answer Supervision Timer? y
Repetitive Call Waiting Tone? y
Repetitive Call Waiting interval (sec): 4
Outpulse Without Tone? y
Network Feedback During Tone Detection? y
Intercept Treatment On Failed Trunk Transfers? n
Vector Disconnect Timer (min):
Station Busy Tone Forward Disconnect: intercept
RECALL TIMING
Flashhook Interval? y Upper Bound (msec): 600
Lower Bound (msec): 200
ENHANCED DCS
Enhanced DCS Enabled? n
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 407 South Africa — Outg oing Forward Signal Ab sent Timer (sec ): 30 — Multifreq uenc y Sig naling Inc oming Interc ept Treatment?: n — Received Signal Gain (-Loss) (dB): 0 — Transmitted Sig nal Gain (-Loss) (dB): -3 —ANI Prefix: — ANI for PBX: — Next ANI Dig it: send -ani — Collec t All Dig its Before Seizure? n — Inc oming Forward Signal Typ es: GROUP-I GROUP-II GROUP-A GROUP-B 11: ig nored 12: ig nored 13: ig nored 14: ig nored 15: end -of-d ial1: normal 2: normal 3: normal 4: normal 5: normal 6: normal 7: normal 8: normal 9: normal 10: normal 11: normal 12: normal 13: normal 14: normal 15: normal1: next-d ig it 3: end -of-dial3: b usy 5: c ong estion 6: free
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
408 South Africa
— Outgoing Forward Signal Types:
nSystem Parameter Country Op tions Ad ministration
— Comp and ing Mode: A-law
— Base Tone Generation Set: 13
— 440Hz PBX-d ial Tone? n
— 440Hz Sec ond ary-dial Tone? n
— Dig ital Loss Plan: 13
— Analog ue Ring ing Cad enc e: 10
— Tone Detec tion Mod e: 5
— Interd ig it Pause: long
— Dial Tone Valid ation Timer: 600ms
— Analog Ring ing Cad enc e: 10
— Customized tone d efinitions follow the syntax as sp ec ified :
[ (Freq uenc y/Level)|silenc e|g oto)] [ (Duration ms)|(Step)]
nRingback:
— (375+ 425/-15.0)(400) GROUP-I GROUP-II GROUP-A GROUP-B
15: end -of-d igits
:
:
:
:2: normal
5: attend ant
6: d ata-c all
:
:
:
:
:
:
:
:
:
:
:
:1: next-d ig it
2: c ong estion
3: end -of-d ial
4: c ong estion
5: c all-info-ani
6: setup-sppath
7: last-2-d ig its
8: last-3-d ig its
9: c ong estion
10: c ong estion
11: c ong estion
12: c ong estion
13: c ong estion
14: c ong estion
15: c ong estion1: free
2: c ong estion
3: b usy
4: c ong estion
5: c ong estion
6: free
7: interc ep t
8: c ong estion
9: c ong estion
10: c ong estion
11: c ong estion
12: c ong estion
13: c ong estion
14: c ong estion
15: c ong estion
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 409 South Africa — (silence)(200) — (375+ 425/-15.0)(400) — (silenc e)(2000) — (go to)(1) nSec ond ary-Dial: — (375+ 425/-15.0)(50) — (go to)(1) nBusy: — (404/-11.0)(500) — (silence)(500) —(goto)(1) nInterc ept: — (404/-11.0)(2500) — (silence)(500) —(goto)(1) nRe o rd e r : — (404/-11.0)(250) — (silence)(250) —(goto)(1) Trunk Administration nBothWay CO Trunk — Trunk Gain: low — RA Trunk Loss: 0d B — Make/Break Ratio: 35/65
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
410 South Africa
change trunk-group 1 Page 1 of 10
TRUNK GROUP
Group Number: 1 Group Type: co CDR Reports: y
Group Name: OUTSIDE CALL COR: 1 TAC: 30
Direction: two-way Outgoing Display? n
Dial Access? y Busy Threshold: 99 Night Service:
Queue Length: 0 Country: 13 Incoming Destination: 2100
Comm Type: voice Auth Code? n Digit Absorption List:
Prefix-1? n Trunk Flash? n Toll Restricted? n
TRUNK PARAMETERS
Trunk Type: loop-start
Outgoing Dial Type: tone Cut-Through? n
Trunk Termination: rc Disconnect Timing(msec): 500
Auto Guard? n Call Still Held? n Sig Bit Inversion: none
Terminal Balanced? n RA Trunk Loss: 0db
Trunk Gain: low
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 10 Receive Answer Supervision? n
change trunk-group 1 Page 2 of 10
TRUNK FEATURES
ACA Assignment? n Measured: none
Maintenance Tests? y
Data Restriction? n
Abandoned Call Search? n
Suppress # Outpulsing? n
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
411 South Africa
nAnalog ue E&M Trunk (setup as wink/wink for Transtel)
— Make/Break Ratio: 35/65
change trunk-group 1 Page 3 of 10
TRUNK GROUP
ADMINISTRABLE TIMERS
Incoming Disconnect(msec): 500 Outgoing Disconnect(msec): 500
Outgoing Dial Guard(msec): 1600
Incoming Glare Guard(msec): 1500 Outgoing Glare Guard(msec): 1500
Ringing Monitor(msec): 5200 Incoming Seizure(msec): 500
Outgoing End of Dial(sec): 10 Outgoing Seizure Response(sec): 5
Programmed Dial Pause(msec): 1500
Flash Length(msec): 540
END TO END SIGNALING
Tone(msec): 350 Pause(msec): 150
OUTPULSING INFORMATION
PPS: 10 Make(msec): 35 Break(msec): 65 PPM? n
change trunk-group 2 Page 1 of 10
TRUNK GROUP
Group Number: 2 Group Type: tie CDR Reports: y
Group Name: e&m COR: 1 TAC: 31
Direction: two-way Outgoing Display? n Trunk Signaling Type:
Dial Access? y Busy Threshold: 99 Night Service:
Queue Length: 0 Incoming Destination:
Comm Type: voice Auth Code? n
TRUNK PARAMETERS (tone or rotary)
Trunk Type (in/out): immed/immed Incoming Rotary Timeout (sec): 10
Outgoing Dial Type: rotary Incoming Dial Type: rotary
Disconnect Timing(msec): 500
Digit Treatment: Digits:
Sig Bit Inversion: none
Connected to Toll? n STT Loss: normal DTT to DCO Loss: normal
Incoming Dial Tone? y
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 10 Receive Answer Supervision? n
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
412 South Africa
nMFC-R2 DID
— Country: 8
— Trunk Gain: low
change trunk-group 2 Page 2 of 10
TRUNK FEATURES
ACA Assignment? n Measured: none
Internal Alert? n Maintenance Tests? n
Data Restriction? n
Abandoned Call Search? n
Suppress # Outpulsing? n
Used for DCS? n
Suppress # Outpulsing? n
Seize When Maintenance Busy: neither-end
change trunk-group 2 Page 3 of 10
TRUNK GROUP
ADMINISTRABLE TIMERS
Incoming Disconnect(msec): 500 Outgoing Disconnect(msec): 500
Incoming Dial Guard (msec): 70 Outgoing Dial Guard(msec): 1600
Incoming Glare Guard (msec): 1500 Outgoing Glare Guard(msec): 1500
Incoming Partial Dial (sec): 18
Outgoing Rotary Dial Interdigit (msec): 800
Outgoing End of Dial(sec): 10 Outgoing Seizure Response(sec): 5
Programmed Dial Pause(msec): 1500 Disconnect Signal Error (sec): 240
Incoming Incomplete Dial Alarm (sec): 255
END TO END SIGNALING
Tone(msec): 350 Pause(msec): 150
OUTPULSING INFORMATION
PPS: 10 Make(msec): 35 Break(msec): 65