Konica Minolta magicolor 5670EN User Manual

							Configuration Menu Overview 67
COLOR 
SEPARA-
TIONSettingsON/OFF
If ON is selected, color separation are performed. The 
contents of a color page is separated into the color pages for 
yellow, magenta, cyan and black, and each is printed with 
black gradations as individual pages. The printing order is 
yellow, magenta, cyan, then black.
If 
OFF is selected, color separation is not performed. A 
normal color separation is performed.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 68
MEMORY DIRECT
This menu item appears when an optional hard disk kit or a CompactFlash 
card is installed, and 
INTERFACE MENU/MEMORY DIRECT is set to 
ENABLE.
In addition, this menu item does not appear if public user access has not 
been permitted through authentication settings. For details on the authentica-
tion settings, refer to the Reference Guide on the Utilities and Documentation 
CD-ROM.
With this menu, settings for “memory direct” function can be specified.
For details on memory direct, refer to “Memory Direct” on page 106.
* This menu item appears when a USB memory device is plugged into 
the KONICA MINOLTA Digital Camera Direct Print Port.
All factory default values are shown in bold.
LIST 
OF 
FILESSelect the file that you wish to output, and then press the Menu/
Select key.
If the file to be printed is in a folder, select the folder, and then 
press the Menu/Select key.
Empty folders are not displayed.
Settings
PRINT
Select this setting to output a file.
Settings
CANCEL
Select this setting to stop outputting and to return to the file list.
LIST OF FILES*
TYPE OF FILES
MEMORY DIRECT
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 69
LETTER/
A4SettingsLETTER/LEGAL/EXECUTIVE/A4/
A5/A6/B5(JIS)/B6(JIS)/GOVT 
LETTER/STATEMENT/FOLIO/SP 
FOLIO/UK QUARTO/FOOLSCAP/
GOVT LEGAL/16K/PHOTO 4×6/
KAI 16/KAI 32/ENV C5/ENV 
C6/ENV DL/ENV MONARCH/ENV 
CHOU#3/ENV CHOU#4/B5(ISO)/
ENV #10/ENV YOU#4/JPOST/
JPOST-D/CUSTOM
Change the size of the paper.
The default setting for North America is 
LETTER. The default setting for all other 
regions is 
A4.
Depending on the setting selected for SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
, PHOTO 4×6 may change to 
PHOTO 10×15.
This menu item does not appear if the 
selected file is a PDF and XPS file.
DUPLEX:
OFFSettingsOFF/LONG EDGE/SHORT EDGE/
Select whether to perform duplex printing.
If 
OFF is selected, duplex printing is not performed.
If 
LONG EDGE is selected, the page will be printed 
on both sides of the paper for long edge binding.
If 
SHORT EDGE is selected, the page will be 
printed on both sides of the paper for short edge 
binding.
This menu item appears only if the optional 
duplex unit (Duplex Option) is installed.
COPIES:1Settings1-9999
Specify the number of copies to be printed (between 
1 and 9999).
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 70
COLLATESettingsON/OFF
Select whether to collate the copies.
If 
ON is selected, collated printing is performed.
If 
OFF is selected, collated printing is not performed.
This menu item appears only if an optional 
hard disk kit or a CompactFlash card of 1GB 
or more is installed.
MAIN 
TRAYSettingsSUB TRAY/MAIN TRAY/OFFSET/
STAPLING
Select the output tray and finishing settings.
When 
SUB TRAY is selected, the paper is fed to 
the sub output tray.
When 
MAIN TRAY is selected, the paper is fed to 
the main output tray.
When 
OFFSET is selected, the paper is fed to the 
main output tray with each copy slightly shifted.
When 
STAPLING is selected, each copy is stapled 
and fed to the main output tray.
This menu item appears only if the optional 
staple finisher is installed.
TYPE 
OF 
FILESSettingsPDF,XPS,JPEG,TIFF/PDF,XPS
Select the type of files to be displayed.
When PDF, XPS is selected, the folder is not displayed in 
LIST OF FILES.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 71 CAMERA DIRECT
This menu item appears when INTERFACE MENU/CAMERA DIRECT is 
set to 
ENABLE.
In addition, this menu item does not appear if public user access has not 
been permitted through authentication settings. For details on the authentica-
tion settings, refer to the Reference Guide on the Utilities and Documentation 
CD-ROM.
With this menu, settings for “camera direct” function can be specified.
These settings are overridden by any settings configured within the 
digital camera.
For details on camera direct, refer to “Camera Direct” on page 104.
ECONOMY PRINT
GLOSSY MODE
RGB SOURCE
BRIGHTNESS
CONTRAST
RGB INTENT
PAPER SOURCE
LAYOUT
CAMERA DIRECT
PAPER MARGIN
IMAGE QUALITY
RGB GRAY
HALFTONE
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 72
All factory default values are shown in bold.
PAPER 
SOURCESettingsTRAY1/TRAY2/TRAY3/TRAY4
Select the Lower Feeder Unit that is used for camera direct 
printing.
TRAY3 and TRAY4 appear only if the optional lower 
feeder units are installed.
LAYOUTSettings1-UP/2-UP/3-UP/4-UP/6-UP/8-UP
Specify the number of images printed on a single sheet of media.
When set to 
1-UP, only one image will be printed on a single 
sheet of media.
PAPER 
MARGINSettingsSTANDARD/MINIMUM
Select the size of the media margins (area that is not printed in).
If 
STANDARD is selected, the standard media margin size is 
specified.
If 
MINIMUM is selected, the media margins are reduced.
IMAGE 
QUAL-
ITYBRIGHT-
NESSSettings-15%/-10%/-5%/0%/+5%/+10%/
+15%
The brightness of the printed image can be 
adjusted.
CONTRASTSettings-15%/-10%/-5%/0%/+5%/+10%/
+15%
The contrast of the image can be adjusted.
ECONOMY 
PRINTSettingsON/OFF
Select whether to print graphics with a reduced 
density by reducing the amount of toner that is used.
If 
ON is selected, the amount of toner used is 
reduced when printing.
If 
OFF is selected, the amount of toner used is not 
reduced when printing.
If GLOSSY MODE is set to ON, the amount of 
toner used is not reduced when printing, even 
if 
ON was selected for this menu item.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 73
GLOSSY 
MODESettingsON/OFF
Select whether to relax the limitations on the amount 
of toner used in order to widen the color reproduc-
tion range and produce glossy prints.
If 
ON is selected, glossy prints are produced.
If 
OFF is selected, glossy prints are not produced.
If ON is selected, the amount of toner used is 
not reduced when printing, even if 
ECONOMY 
PRINT
 is set to ON.
RGB 
SOURCESettingsDEVICE COLOR/sRGB
Specify the color space for RGB image data.
If 
DEVICE COLOR is selected, no color space is 
specified.
If 
RGB source profiles are downloaded with the 
Download Manager, they are available from the list 
of settings.
RGB 
INTENTSettingsVIVID/PHOTOGRAPHIC
Specify the characteristic applied when converting 
RGB image data to CMYK data.
If 
VIVID is selected, a vivid output is produced.
If 
PHOTOGRAPHIC is selected, a brighter output is 
produced.
RGB GRAYSettingsCOMPOSITE BLACK/BLACK AND 
GRAY/BLACK ONLY
Specify how black and grays are reproduced in RGB 
image data.
If 
COMPOSITE BLACK is selected, black is 
reproduced using the CMYK colors.
If 
BLACK AND GRAY is selected, black and gray 
are reproduced using black only.
If 
BLACK ONLY is selected, black is reproduced 
using only black.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 74
HALFTONESettingsLINE ART/DETAIL/SMOOTH
Select how halftones are reproduced.
If 
LINE ART is selected, halftones are reproduced 
with high precision.
If 
DETAIL is selected, halftones are reproduced 
with detail.
If 
SMOOTH is selected, halftones are reproduced 
with smoothness.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 75 INTERFACE MENU
With this menu, interface settings can be specified.
Restart the printer after changing settings in the ETHERNET menu.
SUBNET MASK*
DEFAULT 
GATEWAY*
HTTP*
FTP*
TCP/IPENABLE
IP ADDRESS*
JOB TIMEOUT
ETHERNET
INTERFACE MENU
MEMORY 
DIRECT**
ARP/PING*
CAMERA 
DIRECT
TELNET*
BONJOUR*
DYNAMIC DNS*
IPP*
DHCP*
BOOTP*
ENABLE
ENABLE
ENABLE
ENABLE
ENABLE
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 76
*This menu item appears when INTERFACE MENU/ETHERNET/
TCP/IP/ENABLE
 is set to YES.
** This menu item appears only if an optional hard disk kit or a Com-
pactFlash card is installed.
SNMP*
WSD PRINT*
IPSEC*
ENABLE
ENABLE
SLP*
SMTP*
NETWARE
APPLETALK
SPEED/
DUPLEX
IP ADDRESS 
FILTER*
IEEE802.1X
IPv6*
ENABLE
RAW PORT*ENABLE
BIDIREC-
TIONAL
ENABLE
ENABLE
ENABLE
ENABLE
ENABLE
ACCESS PER-
MISSION
ACCESS 
REFUSE
ENABLE
LINK LOKAL
GLOBAL 
ADDRESS
AUTO 
SETTING
GATEWAY 
ADDRESS
Downloaded From ManualsPrinter.com Manuals