Konica Minolta magicolor 5670EN User Manual

							Configuration Menu Overview 97
LEFT 
ADJUST
MENTLEFT 
ADJ 
TRAY1Settings-15-15
When printing on media in Tray 1, specify 
the size of the left margin.
LEFT 
ADJ 
TRAY2Settings-15-15
When printing on media in Tray 2, specify 
the size of the left margin.
LEFT 
ADJ 
TRAY3Settings-15-15
When printing on media in Tray 3, specify 
the size of the left margin.
LEFT 
ADJ 
TRAY4Settings-15-15
When printing on media in Tray 4, specify 
the size of the left margin.
LEFT 
ADJ 
DUPLEXLEFT 
ADJ 
TRAY1Settings-15-15
When duplex printing on media in Tray 1, 
specify the size of the left margin.
LEFT 
ADJ 
TRAY2Settings-15-15
When duplex printing on media in Tray 2, 
specify the size of the left margin.
LEFT 
ADJ 
TRAY3Settings-15-15
When duplex printing on media in Tray 3, 
specify the size of the left margin.
LEFT 
ADJ 
TRAY4Settings-15-15
When duplex printing on media in Tray 4, 
specify the size of the left margin.
TRANS-
FER 
POWERSIM-
PLEX 
PASSPLAIN 
PAPERSettings-8-7
When printing on plain paper 
using simplex pass, correct 
the secondary image transfer 
current.
TRANS-
PARENCYSettings-8-7
When printing on transparency 
using simplex pass, correct 
the secondary image transfer 
current.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 98
THICK 
1Settings-8-7
When printing on thick 1 using 
simplex pass, correct the sec-
ondary image transfer current.
THICK 
2Settings-8-7
When printing on thick 2 using 
simplex pass, correct the sec-
ondary image transfer current.
POST-
CARDSettings-8-7
When printing on postcard 
using simplex pass, correct 
the secondary image transfer 
current.
ENVELO
PESettings-8-7
When printing on envelope 
using simplex pass, correct 
the secondary image transfer 
current.
LABELSettings-8-7
When printing on LABEL using 
simplex pass, correct the sec-
ondary image transfer current.
GLOSSY 
1Settings-8-7
When printing on GLOSSY 1 
using simplex pass, correct 
the secondary image transfer 
current.
GLOSSY 
2Settings-8-7
When printing on GLOSSY 2 
using simplex pass, correct 
the secondary image transfer 
current.
DUPLEX 
PASSPLAIN 
PAPERSettings-8-7
When printing on plain paper 
using duplex pass, correct the 
secondary image transfer cur-
rent.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 99
MANUAL 
DUPLEXPLAIN 
PAPERSettings-8-7
When printing on plain paper 
using manual duplex pass, 
correct the secondary image 
transfer current.
THICK 
1Settings-8-7
When printing on THICK 1 
using manual duplex pass, 
correct the secondary image 
transfer current.
THICK 
2Settings-8-7
When printing on THICK 2 
using manual duplex pass, 
correct the secondary image 
transfer current.
POST-
CARDSettings-8-7
When printing on POST-
CARD using manual duplex 
pass, correct the secondary 
image transfer current.
ENVE-
LOPESettings-8-7
When printing on ENVELOPE 
using manual duplex pass, 
correct the secondary image 
transfer current.
LABELSettings-8-7
When printing on LABEL using 
manual duplex pass, correct 
the secondary image transfer 
current.
GLOSSY 
1Settings-8-7
When printing on GLOSSY 1 
using manual duplex pass, 
correct the secondary image 
transfer current.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 100
GLOSSY 
2Settings-8-7
When printing on GLOSSY 2 
using manual duplex pass, 
correct the secondary image 
transfer current.
IMG 
ADJ 
THICKCYANSettings-5-0-5
When printing on thick paper, adjust the 
cyan in the image.
MAGENTASettings-5-0-5
When printing on thick paper, adjust the 
magenta in the image.
YELLOWSettings-5-0-5
When printing on thick paper, adjust the 
yellow in the image.
BLACKSettings-5-0-5
When printing on thick paper, adjust the 
black in the image.
IMG 
ADJ 
BLACKSettings-2-0-2
When printing in grayscale, adjust the black in the 
image.
SUP-
PLIESRE-
PLACETRANS. 
BELTSettingsYES/NO
Reset the service life counter for the 
transfer belt unit.
TRANS. 
ROLLERSettingsYES/NO
Reset the service life counter for the 
transfer roller.
FUSER 
UNITSettingsYES/NO
Reset the service life counter for the 
fuser unit.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 101 SERVICE MENU
With this menu, the service representative can adjust the printer and perform 
maintenance operations. This menu cannot be used by the user.
QUICK 
SET-
TINGUPDATE 
SETTINGSetupEXECUTE / CANCEL
Select whether or not to update the 
printer settings from the definitions file on 
the USB memory device.
If 
EXECUTE is selected, the printer set-
tings are updated.
If 
CANCEL is selected, the settings are 
not updated.
BACKUP SET-
TINGBackupEXECUTE / CANCEL
Select whether or not to save the printer 
settings information on a USB memory 
device.
If 
EXECUTE is selected, the printer set-
tings are saved on a USB memory 
device.
If 
CANCEL is selected, the settings are 
not saved.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 102
Downloaded From ManualsPrinter.com Manuals 
						

							Camera Direct
Downloaded From ManualsPrinter.com Manuals 
						

							Camera Direct 104
Camera Direct
If a digital camera with PictBridge (1.0 or later) is connected to the printer 
through the Camera Direct Print port, images stored on the digital camera can 
be printed directly from the printer.
For details on using the digital camera, refer to your digital cameras 
manual.
The following features are not supported with Camera Direct.
- DPOF AUTOPRINT image print
- Cropping print
- Borderless
- Print quality (printer setup)
- Paper type (printer setup)
- DPOF cable disconnect recovery
Printing Directly from a Digital Camera
1From the printer’s Camera Direct Menu, specify settings for Paper 
Source
, Layout, Paper Margin and Image Quality.
The Media Type setting that is used is the default printer setting 
that is selected.
The Media Type setting cannot be selected from the digital cam-
era.
If these settings can be specified from the digital camera, they do 
not need to be specified from the control panel. These settings are 
overridden by settings configured within the digital camera.
For details on control panel settings, refer to “CAMERA DIRECT” 
on page 71.
2Connect the USB cable to the dig-
ital camera and to the KONICA 
MINOLTA Digital Camera Direct 
Print Port.
A USB cable is not 
included with the printer 
and must be purchased 
separately, if not supplied 
with your digital camera.
3From the digital camera, specify 
the image that you wish to print and the desired number of copies.
4Start printing from the digital camera.
Downloaded From ManualsPrinter.com Manuals 
						

							Memory Direct
Downloaded From ManualsPrinter.com Manuals 
						

							Memory Direct 106
Memory Direct
PDF, XPS, JPEG and TIFF files saved on USB memory devices can be 
printed by plugging the USB memory device into the printer.
Memory direct can be used only if an optional hard disk kit or a Com-
pactFlash card is installed.
In order to perform collated printing with memory direct, an optional 
hard disk kit or a CompactFlash card of 1 GB or more must be 
installed.
For details on specifying settings with the control panel, refer to “MEM-
ORY DIRECT” on page 68.
Printing From a Connected USB Memory Device
1Plug the USB memory device 
into the KONICA MINOLTA Digi-
tal Camera Direct Print Port.
The USB icon appears in the 
upper-right corner of the mes-
sage window, and the 
Memory 
Direct
 menu appears.
2Select LIST OF FILES, and then press the Menu/Select key.
When JPEG and TIFF files are displayed, select PDF, XPS, JPEG, 
TIFF for TYPE OF FILES.
3From the file list, select the file that you wish to print, and then press the 
Menu/Select key.
If the file to be printed is in a folder, select the folder, and then press the 
Menu/Select key.
A maximum of 99 folders and files can be displayed.
Up to 7 folder levels can be displayed.
4Select PRINT, and then press the Menu/Select key.
When printing is finished, the status screen appears again.
Settings can be specified for the paper size, duplex printing, num-
ber of copies, collating, the output tray, and finishing.
Do not unplug the USB memory device from the KONICA 
MINOLTA Digital Camera Direct Print Port during memory direct 
printing.
Downloaded From ManualsPrinter.com Manuals