Konica Minolta magicolor 5670EN User Manual
Have a look at the manual Konica Minolta magicolor 5670EN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Configuration Menu Overview 77 All factory default values are shown in bold. JOB TIME- OUTSettings5 seconds-15 seconds-300 seconds Specify the timeout interval for a print job being received. ETHER- NETTCP/IP ENABLESettingsYES/NO If YES is selected, TCP/IP is enabled. If NO is selected, TCP/IP is disabled. IP ADDRESSSetting000.000.000.000 Set the IP address for this printer on the network. Use the , , , and keys to specify the value. If the IP address is manually specified, DHCP, BOOTP and ARP/PING are automatically set to OFF. SUBNET MASKSetting000.000.000.000 Specify the subnet mask for the network. Use the , , , and keys to specify the value. DEFAULT GATEWAYSetting000.000.000.000 Specify the IP address of the router if one is on the network. Use the , , , and keys to specify the value. DHCPSettingsON/OFF Select whether or not the IP address is automatically acquired. If ON is selected, the IP address is auto- matically acquired. If OFF is selected, the IP address is not automatically acquired. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 78 BOOTPSettingsON/OFF Select whether or not the IP address is automatically acquired. If ON is selected, the IP address is auto- matically acquired. If OFF is selected, the IP address is not automatically acquired. ARP/ PINGSettingsON/OFF Select whether or not the IP address is automatically acquired. If ON is selected, the IP address is auto- matically acquired. If OFF is selected, the IP address is not automatically acquired. HTTP ENABLESettingsYES/NO If YES is selected, HTTP is enabled. If NO is selected, HTTP is dis- abled. FTP ENABLESettingsYES/NO If YES is selected, FTP is enabled. If NO is selected, FTP is dis- abled. TELNETSettingsENABLE/DISABLE Select whether to enable or disable Telnet transmissions. When ENABLE is selected, Telnet trans- missions are enabled. When DISABLE is selected, Telnet transmissions are disabled. BONJOUR ENABLESettingsYES/NO If YES is selected, Bonjour is enabled. If NO is selected, Bonjour is disabled. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 79 DYNAMIC DNSENABLESettingsYES/NO If YES is selected, Dynamic DNS is enabled. If NO is selected, Dynamic DNS is disabled. IPP ENABLESettingsYES/NO If YES is selected, IPP is enabled. If NO is selected, IPP is dis- abled. RAW PORTENABLESettingsYES/NO If YES is selected, Raw Port is enabled. If NO is selected, Raw Port is disabled. BIDI- REC- TIONALSettingsON/OFF If ON is selected, Raw port transmissions are enabled. If OFF is selected, Raw port transmissions are disabled. SLP ENABLESettingsYES/NO If YES is selected, SLP is enabled. If NO is selected, SLP is dis- abled. SMTP ENABLESettingsYES/NO If YES is selected, SMTP is enabled. If NO is selected, SMTP is dis- abled. SNMP ENABLESettingsYES/NO If YES is selected, SNMP is enabled. If NO is selected, SNMP is disabled. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 80 WSD PRINTENABLESettingsYES/NO If YES is selected, WSD print is enabled. If NO is selected, WSD print is disabled. IPSEC ENABLESettingsYES/NO If YES is selected, IPsec is enabled. If NO is selected, IPsec is dis- abled. IP ADDRESS FILTERACCESS PER- MIS- SIONSettingsENABLE/ DISABLED Select whether to enable or disable access granting. If ENABLE is selected, access granting is enabled. If DISABLE is selected, access granting is disabled. ACCESS REFUSESettingsENABLE/ DISABLED Select whether to enable or disable access blocking. If ENABLE is selected, access blocking is enabled. If DISABLE is selected, access blocking is disabled. IPv6 ENABLESettingsYES/NO If YES is selected, IPv6 is enabled. If NO is selected, IPv6 is dis- abled. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 81 AUTO SET- TINGSettingsYES/NO If YES is selected, auto configuration of IPv6 is enabled. If NO is selected, auto config- uration of IPv6 is disabled. LINK LOCALDisplays the Link-Local address. GLOBAL ADDRESSDisplays the global address. GATE- WAY ADDRESSDisplays the gateway address. NETWARE ENABLESettingsYES/NO If YES is selected, NetWare is enabled. If NO is selected, NetWare is disabled. APPLE TALKENABLESettingsYES/NO If YES is selected, AppleTalk is enabled. If NO is selected, AppleTalk is disabled. SPEED/ DUPLEXSettingsAUTO/10BASE FULL/10BASE HALF/100BASE FULL/100BASE HALF/1000BASE FULL Specify the transmission speed for the network and the transmission method for bi-directional transmission. IEEE 802.1XENABLESettingsYES/NO If YES is selected, IEEE 802.1X is enabled. If NO is selected, IEEE 802.1X is dis- abled. MEMORY DIRECTSettingsENABLE/DISABLE Select whether to enable or disable memory direct printing. If ENABLE is selected, memory direct printing is enabled. If DISABLE is selected, memory direct printing is disabled. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 82 CAMERA DIRECTSettingsENABLE/DISABLE Select whether to enable or disable camera direct printing. If ENABLE is selected, camera direct printing is enabled. If DISABLE is selected, camera direct printing is disabled. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 83 SYS DEFAULT MENU With this menu, settings can be specified to adjust the operation of the printer, such as the display language of the message window and the time until the machine enters Energy Saver mode. LANGUAGE EMULATIONDEF. EMULATION POSTSCRIPTWAIT TIMEOUT PS ERROR PAGE PS PROTOCOL PCLCR/LF MAPPING LINES PER PAGE FONT SOURCEFONT NUMBER PITCH SIZE (POINT SIZE) SYMBOL SET PAPERDEFAULT PAPER UNIT OF MEASURE SYS DEFAULT MENU PAPER SIZE CUSTOM SIZE PAPER TYPE GRAYSCALE PAGE DO STARTUP PAGESTARTUP OPTIONS AUTO CONTINUE DIGITAL SIGNATURE XPS ERROR PAGE XPS***** Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 84 LCD CONTRAST SECURITYCHANGE PASSWORD LOCK PANEL CLOCKDATE (xx.xx.xx) TIME HDD FORMAT*USER AREA ONLY ALL RESTORE DEFAULTSRESTORE NETWORK RESTORE PRINTER RESTORE ALL ENERGY SAVER TIME** MENU TIMEOUT ENERGY SAVER TIME ZONE HOLD JOB TIMEOUT* CARD FOR- MAT***USER AREA ONLY ALL Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 85 * These menu items appear only if an optional hard disk kit is installed. ** This menu item appears when you select ON from the ENERGY SAVER menu. *** This menu item appears only if an optional CompactFlash card is installed. **** These menu items appear only if corresponding optional lower feeder unit is installed. ***** This menu item appears only if an optional hard disk kit or a CompactFlash card is installed. ENABLE WARNINGPAPER EMPTYTRAY1 TRAY2 TRAY3**** TRAY4**** TONER LOW I-UNIT LOW Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 86 All factory default values are shown in bold. LAN- GUAGESettingsENGLISH/FRENCH/GERMAN/SPANISH/ ITALIAN/PORTUGUESE/CZECH/JAPANESE/ KOREAN/SIMPLIFIED CHINESE/ TRADITIONAL CHINESE/DUTCH/RUSSIAN/ POLISH The display language of the message window can be changed to the selected language. The language selections appear in the message window in the corresponding language. For example, GERMAN appears as DEUTSCH. EMULA- TIONDEF. EMULA- TIONSettingsAUTO/POSTSCRIPT/PCL Specify the printer emulation language. If AUTO is selected, the printer automatically selects the printer emulation language from the data stream. POST- SCRIPTWAIT TIME OUTSettings0-300 Specify the time until an error is determined to be a PostScript error. If 0 is selected, no timeout is performed. PS ERROR PAGESettingsON/OFF Select whether or not an error page is printed when a Postscript error occurs. PS PROTO- COLSettingsAUTO/NORMAL/BINARY Specify the protocol for data transmissions with a PostScript data stream. If AUTO is selected, the printer automatically selects an applicable protocol from the data stream. Downloaded From ManualsPrinter.com Manuals