Konica Minolta magicolor 5670EN User Manual
Have a look at the manual Konica Minolta magicolor 5670EN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Lower Feeder Unit 267 10Close the right side cover of the lower feeder unit. 11Declare Paper Source Unit 3/4 in the Windows printer driver (Properties/ Configure tab). Downloaded From ManualsPrinter.com Manuals
Staple Finisher 268 Staple Finisher When the staple finisher is installed, job separation, offset and staple printing can be performed. Accessories 1 6 2 5 4 3 71 3 4 5 2 67 1 Staple Finisher 2 Relay Unit 3 Main output tray 4 Sub output tray 5 Hooks (For securing the relay unit) 6 Hooks (For installing the staple finisher) 7 Mounting clips for the main output tray Downloaded From ManualsPrinter.com Manuals
Staple Finisher 269 Unpacking and installing the Staple Finisher 1Open the box for the optional finisher. 2Unpack the relay unit, and then open the relay unit cover 3Remove all packing tape. 4Close the relay unit cover. Downloaded From ManualsPrinter.com Manuals
Staple Finisher 270 5Remove the two mounting hooks in the bag taped to the back of the relay unit. Since the gears (1) are exposed, be careful not to grab them or hit them. Since the performance of the transport roller and springs (2) may be greatly reduced if they are firmly grabbed, treat them with special care. 6Turn off the machine and discon- nect the power cord and inter- face cables. 2 1 Downloaded From ManualsPrinter.com Manuals
Staple Finisher 271 7Remove the output tray from the machine. While lightly bending the output tray as much as possible, remove the out- put tray. 8Remove the inside cover (three locations) at the top of the machine. 9Use a coin to remove the front cover (two locations) at the top of the machine. Downloaded From ManualsPrinter.com Manuals
Staple Finisher 272 10Install the relay unit on the machine. 11Open the relay unit cover. Downloaded From ManualsPrinter.com Manuals
Staple Finisher 273 12With your fingers, press the left and right pins. Make sure that the pins are pushed in. 13Secure the relay unit on the machine with the two mounting hooks. 14Lock the relay unit lever. Downloaded From ManualsPrinter.com Manuals
Staple Finisher 274 15Close the relay unit cover. 16Remove the two finisher-mount- ing hooks from the box. 17Remove the main output tray and the sub output tray, and then unpack them. 18Hold the left and right sides of the staple finisher and lift it out of the box. When grabbing the staple finisher, be sure to grab the areas indicated in the illustration. 19Remove the sheet from the sta- ple finisher. Downloaded From ManualsPrinter.com Manuals
Staple Finisher 275 20Remove the packing tape and packing materials from the con- nectors and the outside of the staple finisher. 21Open the stapler cover, and then remove the tape securing the staple cartridge. 22Use a coin to remove the cover (two locations) on the left side of the machine. Downloaded From ManualsPrinter.com Manuals
Staple Finisher 276 23Secure the two mounting hooks on the staple finisher to the left side of the machine. 24Align the side of the relay unit with that of the staple finisher, and then hook them onto the fin- isher to install them. When grabbing the staple finisher, be sure to grab the areas indicated in the illustration. Downloaded From ManualsPrinter.com Manuals