Konica Minolta magicolor 5670EN User Manual
Have a look at the manual Konica Minolta magicolor 5670EN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Using Media Downloaded From ManualsPrinter.com Manuals
Media Specifications 108 Media Specifications What types and sizes of media can I load? Media Media Size Tray* Duplex (double-sided)Inch Millimeter Letter 8.5 x 11.0 215.9 x 279.4 1/2/3/4 Yes Legal 8.5 x 14.0 215.9 x 355.6 1/3/4 Yes Statement 5.5 x 8.5 139.7 x 215.9 1/2** No Executive 7.25 x 10.5 184.2 x 266.7 1/2**/3/4 Yes A4 8.2 x 11.7 210.0 x 297.0 1/2/3/4 Yes A5 5.9 x 8.3 148.0 x 210.0 1/2** No A6 4.1 x 5.8 105.0 x 148.0 1/2** No B5 (JIS) 7.2 x 10.1 182.0 x 257.0 1/2**/3/4 Yes B6 5.0 x 7.2 128.0 x 182.0 1/2** No Folio 8.25 x 13.0 210.0 x 330.0 1 Yes SP Folio 8.5 x 12.69 215.9 x 322.3 1 Yes Foolscap 8.0 x 13.0 203.2 x 330.2 1 Yes UK Quarto 8.0 x 10.0 203.2 x 254.0 1/2** No Government Letter 8.0 x 10.5 203.2 x 266.7 1/2** Yes Government Legal 8.5 x 13.0 215.9 x 330.2 1/3/4 Yes Photo Size 4 x 6/10 x 15 4.0 x 6.0 100.0 x 150.0 1/2** No 16 K 7.7 x 10.6 195.0 x 270.0 1/2** Yes Kai 16 7.3 x 10.2 185.0 x 260.0 1/2** Yes Kai 32 5.1 x 7.3 130.0 x 185.0 1/2** No Japanese Postcard 3.9 x 5.8 100.0 x 148.0 1/2** No Japanese Postcard-D 5.8 x 7.9 148.0 x 200.0 1/2** No B5 (ISO) 6.9 x 9.8 176.0 x 250.0 1/2** No Envelope #10 4.125 x 9.5 104.8 x 241.3 1/2** No Envelope DL 4.3 x 8.7 110.0 x 220.0 1/2** No Envelope C5 6.4 x 9.0 162.0 x 229.0 1/2** No Envelope C6 4.5 x 6.4 114.0 x 162.0 1/2** No Envelope Monarch 3.875 x 7.5 98.4 x 190.5 1/2** No Envelope Chou #3 4.7 x 9.2 120.0 x 235.0 1/2** No Envelope Chou #4 3.5 x 8.1 90.0 x 205.0 1/2** No Envelope You #4 4.1 x 9.3 105.0 x 235.0 1/2** No Custom, Minimum 3.6 x 5.9 92.0 x 148.0 1/2** No*** Custom, Maximum 8.5 x 47.2 216.0 x 1200.0 1***** No**** Notes: * Tray 1= Manual feed tray Tray 3/4 = Lower feeder units (optional) ** When the 500 sheet tray is the standard paper tray, applies to Tray 1 only. *** The minimum possible size for duplex (double-sided) printing is B5(JIS). **** The maximum possible size for duplex printing is Legal. ***** Banner paper longer than 355.6 mm (14.0) can only be fed through Tray 1 one sheet at a time. Downloaded From ManualsPrinter.com Manuals
Media Types 109 For custom sizes, use the printer driver to specify the settings within the ranges shown in the above table. Media Types Before purchasing a large quantity of special media, do a trial print with the same media and check the print quality. Keep media on a flat, level surface in its original wrapper until it is time to load it. For a list of approved media, refer to printer.konicaminolta.com. Plain Paper (Recycled Paper) Use media that is Suitable for plain paper laser printers, such as standard or recycled office paper.Capacity Tray 1 (Manual Feed Tray)Up to 100 sheets, depending on the paper weight. Tray 2500 sheet tray: Up to 500 sheets, depending on the paper weight. 250 sheet tray: Up to 250 sheets, depending on the paper weight. Tray 3/4Up to 500 sheets, depending on the paper weight. Orientation Tray 1 (Manual Feed Tray)Face down Tray 2/3/4Face up Driver Media Type Plain Paper (Recycled) Weight60–90 g/m² (16–24 lb bond) DuplexingSee page 108 for supported sizes. Glossy Mode ON/OFF Supported Glossy mode is Disabled at Grayscale (Color Mode), or Duplex Print. Downloaded From ManualsPrinter.com Manuals
Media Types 110 Note Do not use the media types listed below. These could cause poor print quality, media misfeeds, or damage to the printer. DO NOT use media that is „Coated with a processed surface (such as carbon paper, and colored paper that has been treated) „Carbon backed „Unapproved iron-on transfer media (such as heat-sensitive paper, heat-pressure paper, and heat-press transfer paper) „Cold-water-transfer paper „Pressure sensitive „Designed specifically for inkjet printers (such as superfine paper, glossy paper, glossy film, and postcards) „Paper that has already been printed on –Paper that has been printed on with an inkjet printer –Paper that has been printed on with a monochrome/color laser printer/ copier –Paper that has been printed on with a heat-transfer printer –Paper that has been printed on with any other printer or fax machine „Dusty „Wet (or damp) Keep media between 35% and 85% relative humidity. Toner does not adhere well to moist or wet paper. „Layered „Adhesive „Folded, creased, curled, embossed, warped, or wrinkled „Perforated, three-hole punched, or torn „Too slick, too coarse, or too textured „Different in texture (roughness) on the front and back „Too thin or too thick „Stuck together with static electricity „Composed of foil or gilt; too luminous „Heat sensitive or cannot withstand the fusing temperature (180°C [356°F]) „Irregularly shaped (not rectangular or not cut at right angles) Downloaded From ManualsPrinter.com Manuals
Media Types 111 „Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons „Acidic „Any other media that is not approved Thick Stock Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. Test all thick stock to ensure acceptable performance and to ensure that the image does not shift. DO NOT use thick stock that is „Mixed with any other media (as this will cause printer misfeeding) Capacity Tray 1 (Manual Feed Tray)Up to 20 thick stock sheets, depending on their thickness. Tray 2500 sheet tray: Not supported 250 sheet tray: Up to 50 sheets, depending on the paper weight. Tray 3/4Not supported Orientation Tray1 (Manual Feed Tray )Face down Tray 2Face up Driver Media TypeThick 1 (91-150 g/m 2) Thick 2 (151-210 g/m2) Weight91–210 g/m² (25–55.9 lb bond) DuplexingNot supported Glossy Mode ON/OFF Supported Glossy mode is Disabled at Grayscale (Color Mode), or Duplex Print. Downloaded From ManualsPrinter.com Manuals
Media Types 112 Envelopes Print on the front (address) side only. Some parts of the envelope consist of three layers of paper—the front, back, and flap. Anything printed in these lay- ered regions may be lost or faded. Use envelopes that are „Common office envelopes approved for laser printing with diagonal joints, sharp folds and edges, and ordinary gummed flaps Because the envelopes pass through heated rollers, the gummed area on the flaps may seal. Using envelopes with emulsion-based glue avoids this problem. „Approved for laser printing „Dry DO NOT use envelopes that have „Sticky flaps „Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal- ing „Transparent windows „Too rough of a surface „Material that will melt, vaporize, offset, discolor, or emit dangerous fumes „Been presealed Capacity Tray 1 (Manual Feed Tr a y )Up to 10 envelopes, depending on their thickness Tr a y 2500 sheet tray: Not supported 250 sheet tray: Up to 10 sheets, depending on the paper weight. Tr a y 3 / 4Not supported Orientation Tray 1 (Manual Feed Tray)Face down Tray 2Face up Driver Media TypeEnvelope Weight91–163 g/m² (25–43 lb bond) DuplexingNot supported Glossy ModeNot supported Downloaded From ManualsPrinter.com Manuals
Media Types 113 Labels A sheet of labels consists of a face sheet (the printing surface), adhesive, and a carrier sheet: „The face sheet must follow the plain paper specification. „The face sheet surface must cover the entire carrier sheet, and no adhe- sive should come through on the surface. You can print continuously with label sheets. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Try printing your data on a sheet of plain paper first to check placement. Check your application documentation for more information on printing labels. Use label sheets that are „Recommended for laser printers „Letter or A4 size (adhesive label stock) Capacity Tray 1 (Manual Feed Tray)Up to 20 label sheets, depending on their thickness Tray 2500 sheet tray: Not supported 250 sheet tray: Up to 20 sheets, depending on the paper weight. Tray 3/4Not supported Orientation Tray 1 (Manual Feed Tray )Face down Tray 2Face up Driver Media TypeLabel Weight60–163 g/m² (16–43 lb bond) DuplexingNot supported Glossy Mode ON/OFF Supported Glossy mode is Disabled at Grayscale (Color Mode), or Duplex Print. Downloaded From ManualsPrinter.com Manuals
Media Types 114 DO NOT use label sheets that „Have labels that easily peel off or have parts of the label already removed „Have backing sheets that have peeled away or have exposed adhesive Labels may stick to the fuser, causing them to peel off and media misfeeds to occur. „Are precut or perforated Letterhead Try printing your data on a sheet of plain paper first to check placement. Capacity Tray 1 (Manual Feed Tr a y )Up to 20 sheets, depending on their size and thickness Tr a y 2500 sheet tray: Not supported 250 sheet tray: Up to 20 sheets, depending on the paper weight. Tr a y 3 / 4Not supported Orientation Tray 1 (Manual Feed Tray)Face down Tray 2Face up Driver Media TypeLetterhead Weight60–90 g/m² (16–24 lb) DuplexingSee page 108 for supported sizes. Glossy Mode ON/OFF Supported Glossy mode is Disabled at Grayscale (Color Mode), or Duplex Print. Full-page labels (uncut) Do not useOK to use Shiny backed paper Downloaded From ManualsPrinter.com Manuals
Media Types 115 Postcards Try printing your data on a sheet of plain paper first to check placement. Use postcards that are „Approved for laser printers DO NOT use postcards that are „Coated „Designed for inkjet printers „Precut or perforated „Preprinted or multicolored If the postcard is warped, press on the warped area before putting it in the tray. Capacity Tray 1 (Manual Feed Tray)Up to 20 postcards, depending on their thickness Tray 2500 sheet tray: Not supported 250 sheet tray: Up to 50 sheets, depending on the paper weight. Tray 3/4Not supported Orientation Tray 1 (Manual Feed Tray )Face down Tray 2Face up Driver Media TypePostcard Weight60–163 g/m² (16–90 lb bond) DuplexingNot supported Glossy Mode ON/OFF Supported Glossy mode is Disabled at Grayscale (Color Mode), or Duplex Print. Downloaded From ManualsPrinter.com Manuals
Media Types 116 Transparencies Do not fan transparencies before loading them. Resulting static elec- tricity may cause printing errors. If you touch the face of the transparencies with your bare hands, print quality may be affected. Keep the printer path clean. Transparencies are especially sensitive to a dirty media path. If there are shadows on either the top or the bottom of the sheets, see chapter 9, “Maintaining the Printer” . Remove transparencies as soon as possible from the output tray to avoid static buildup. You can print continuously with transparencies. However, this could affect the media feed, depending on the media quality, static buildup, and printing envi- ronment. Try printing your data on a sheet of plain paper first to check placement. If you have problems feeding 20 sheets, try loading only 1–10 sheets at a time. Loading a large number of transparencies at one time may cause static buildup, thus causing feeding problems. Always first test a small quantity of a particular type of transparency. Use transparencies that are „Approved for laser printing Capacity Tray 1 (Manual Feed Tr a y )Up to 20 transparencies, depending on their thickness Tr a y 2500 sheet tray: Not supported 250 sheet tray: Up to 20 sheets, depending on the paper weight. Tr a y 3 / 4Not supported Orientation Tray 1 (Manual Feed Tray)Face down Tray 2Face up Driver Media TypeTransparency DuplexingNot supported Glossy ModeNot supported Downloaded From ManualsPrinter.com Manuals