Konica Minolta magicolor 4690MF User Manual
Have a look at the manual Konica Minolta magicolor 4690MF User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Replacing Consumables 169 Replacing the Transfer Roller When the time to replace the transfer roller is reached, the message Trans. Roll. Life appears. Printing can continue even after this message appears; however, since the print quality is reduced, the transfer roller should be replaced immediately. When replacing the transfer roller, also replace the ozone filter. A new ozone filter is included with the new transfer roller. Replacing the Transfer Roller 1Pull the lever, and then open the right side cover. Before opening the right side cover, fold up Tray 1. 2Move the lever toward you. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 170 3Remove the transfer roller. 4Prepare a new transfer roller. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 171 5Insert the shaft of the transfer roller into the bearings. 6Move the levers away from you until it snaps into place. 7Close the right side cover. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 172 8Reset the counter with ADMIN. MANAGEMENT/SUPPLIES REPLACE/TRANSFER ROLLER in the UTILITY menu. 9Replace the ozone filter, using the following procedure. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 173 Replacing the Ozone Filter 1Remove the ozone filter from the machine. 2Slide the new ozone filter into the machine until it snaps into place. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 174 Replacing the Transfer Belt Unit When the time to replace the transfer belt unit is reached, the message Trans. Belt Life appears. Printing can continue even after this mes- sage appears; however, since the print quality is reduced, the transfer belt unit should be replaced immediately. 1Turn off the machine and discon- nect the power cord and inter- face cover. 2Pull the lever, and then open the right side cover. Before opening the right side cover, fold up Tray 1. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 175 3Use a coin to loosen the screws securing the transfer belt unit. 4Open the machine’s front cover. 5Remove the waste toner bottle. For details on removing the waste toner bottle, refer to “Replacing the Waste Toner Bottle” on page 165. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 176 6Remove the all imaging units. For details on removing the imaging unit, refer to “Replacing an Imaging Unit” on page 159. Cover the removed imag- ing unit to protect it from direct sunlight. 7Remove the output tray. K K YMC K K Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 177 8Open the left side cover. 9On the left side, pull to the right the blue shutter lever for the transfer belt unit. Do not remove the blue lever. 10Hold the arm, and then carefully pull out the transfer belt unit. Downloaded From ManualsPrinter.com Manuals
Replacing Consumables 178 11Prepare a new transfer belt unit. Be careful not to touch the surface of the belt. Do not remove the blue lever. 12Remove all packing tape from the new transfer belt unit. 13Remove the protective cover from the new transfer belt unit. 14Insert the new transfer belt unit along the rails. Downloaded From ManualsPrinter.com Manuals