Brother MFC 9320CW User Manual

							Menu and features
199
D
7.Network
(MFC-9320CW)
1.Wired LAN1.TCP/IP 1.Boot MethodAuto*
Static
RARP
BOOTP
DHCPChooses the BOOT 
method that best 
suits your needs.See 
Network 
User
’s 
Guide on 
the 
CD
-ROM.
2.IP Address[000-255]. [000-255]. 
[000-255]. [000-255]Enter the IP address.
3.
Subnet Mask[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Subnet 
mask.
4.Gateway[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Gateway 
address.
5.Node NameBRNXXXXXXXXXXXXEnter the Node 
name.
6.
WINS ConfigAuto*
StaticChooses the WINS 
configuration mode.
7.
WINS ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
WINS server.
8.DNS ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
DNS server.
9.APIPA On*
OffAutomatically 
allocates the IP 
address from the 
link-local address 
range.
0.IPv6On
Off*Enable or Disable the 
IPv6 protocol. If you 
want to use the IPv6 
protocol, visit 
http://solutions.
brother.com/ for 
more information. Main 
MenuSubmenu Menu Selections Options Descriptions Page
 
						

							200
7.Network
(MFC-9320CW)
(Continued)
1.Wired LAN
(Continued)2.Ethernet—Auto*
100B-FD
100B-HD
10B-FD
10B-HDChooses the 
Ethernet link mode.
See 
Network 
User
’s 
Guide on 
the 
CD
-ROM.
3.Set to
Default—1.Reset
2.ExitRestore the wired 
network setting to 
factory default.
4.
Wired Enable—On*
OffEnable or Disable the 
Wired LAN manually.
2.WLAN 1.TCP/IP 1.
Boot MethodAuto*
Static
RARP
BOOTP
DHCPChooses the BOOT 
method that best 
suits your needs.
2.IP Address[000-255]. [000-255]. 
[000-255]. [000-255]Enter the IP address.
3.
Subnet Mask[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Subnet 
mask.
4.Gateway[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Gateway 
address.
5.Node NameBRWXXXXXXXXXXXXEnter the Node 
name.
6.
WINS ConfigAuto*
StaticChooses the WINS 
configuration mode.
7.
WINS ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
WINS server.
8.DNS ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
DNS server.
9.APIPA On*
OffAutomatically 
allocates the IP 
address from the 
link-local address 
range. Main 
MenuSubmenu Menu Selections Options Descriptions Page
 
						

							Menu and features
201
D
7.Network
(MFC-9320CW)
(Continued)
2.WLAN
(Continued)1.TCP/IP
(Continued)0.IPv6On
Off*Enable or Disable the 
IPv6 protocol. If you 
want to use the IPv6 
protocol, visit 
http://solutions.
brother.com/ for 
more information.
See 
Network 
User
’s 
Guide on 
the 
CD
-ROM.
2.Setup Wizard1.On
2.Off— You can configure 
your print server.
3.
SES/WPS/AOSS1.On
2.Off— You can easily 
configure your 
wireless network 
settings using the 
one-button push 
method.
4.
WPS w/PIN
Code1.On
2.Off— You can easily 
configure your 
wireless network 
settings using WPS 
with a PIN code.
5.
WLAN Status1.StatusActive(11b)
Active(11g)
Wired LAN Active
WLAN OFF
AOSS Active
Connection FailYou can see the 
current wireless 
network status.
2.SignalStrong
Medium
Weak
NoneYou can see the 
current wireless 
network signal 
strength.
3.SSID— You can see the 
current SSID.
4.Comm. ModeAd-hoc
InfrastructureYou can see the 
current 
Communication 
Mode.
6.Set to
Default—1.Reset
2.ExitRestore the wireless 
network settings to 
factory default.
7.
WLAN Enable—On
Off*Enable or disable the 
wireless LAN 
manually. Main 
MenuSubmenu Menu Selections Options Descriptions Page
 
						

							202
7.Network
(MFC-9320CW)
(Continued)
3.Scan To
FTP——Color 100 dpi*
Color 200 dpi
Color 300 dpi
Color 600 dpi
Gray 100 dpi
Gray 200 dpi
Gray 300 dpi
B&W 200 dpi
B&W 200x100 dpiChooses the file 
format to send the 
scanned data via 
FTP.See 
Network 
User
’s 
Guide on 
the 
CD
-ROM.
4.ScanTo
Network——Color 100 dpi*
Color 200 dpi
Color 300 dpi
Color 600 dpi
Gray 100 dpi
Gray 200 dpi
Gray 300 dpi
B&W 200 dpi
B&W 200x100 dpiYou can scan a black 
and white or colour 
document directly to 
a CIFS server on 
your local network or 
on the internet.
5.
Time Zone——UTCXXX:XXSets the time zone 
for your country.
0.Network
Reset1.Reset—1.Yes
2.NoRestores all network 
settings to factory 
default.
2.Exit—— Main 
MenuSubmenu Menu Selections Options Descriptions Page
 
						

							Menu and features
203
D
Main Menu Submenu Menu Selections Options Descriptions Page
8.
Machine Info.
(MFC-9320CW)
6.
Machine Info.
(MFC-9120CN)1.Serial No.— — You can check the 
serial number of your 
machine.177
2.Page Counter—Total
Fax/List
Copy
PrintYou can check the 
number of total 
pages the machine 
has printed during its 
life.177
3.Parts Life 1.Drum1.Black(K)
2.Cyan(C)
3.Magenta(M)
4.Yellow(Y)You can check the 
percentage of a 
machine part’s life 
that remains 
available.177
2.Belt Unit—
3.PF Kit—
4.Fuser—
0.
Initial Setup1.Receive Mode—Fax Only*
Fax/Tel
External TAD
ManualChooses the receive 
mode that best suits 
your needs.44
2.Date&Time— — Puts the date and 
time on the LCD and 
in headings of faxes 
you send.See 
Quick 
Setup 
Guide.
3.Station ID—Fax:
Tel:
Name:Sets your name and 
fax number to appear 
on each page you 
fax.
4.Tone/Pulse—Tone*
PulseChooses the dialling 
mode.65
5.Dial Tone—Detection
No Detection*You can shorten the 
dial tone detect 
pause.131
6.Phone Line Set—Normal*
ISDN
PBXSelect the phone line 
type.51
7.Reset 1.Network1.Reset
2.ExitRestores all network 
settings to factory 
default.177
2.
Address & Fax1.Reset
2.ExitRestores all stored 
phone numbers and 
fax settings.
3.
All Settings1.Reset
2.ExitRestores all the 
machine settings to 
factory default.
 
						

							204
Entering textD
When setting certain menu selections, such as the Station ID, you will need to type text 
characters. The dial pad keys have letters printed on them. The keys: 0, # and l do not have 
printed letters because they are used for special characters.
Press the appropriate dial pad key the number of times shown in this reference table to access 
the character you want.
For menu selections that do not allow lower case character selection, please use this reference 
table.
Inserting spaces
To enter a space in a fax number, press c once between numbers. To enter a space in a name, 
press c twice between characters.
Making corrections
If you entered a letter incorrectly and want to change it, press d to move the cursor to the incorrect 
character, and then press Clear/Back.
Repeating letters
To enter a character on the same key as the previous character, press c to move the cursor right 
before pressing the key again.
Press 
Keyone 
timetwo 
timesthree 
timesfour 
timesfive 
timessix 
timesseven 
timeseight 
timesnine 
times
1@. /1@. /1@
2abcABC2ab
3de fDEF3de
4gh iGHI 4gh
5jklJKL5jk
6mn oMNO6mn
7pq r sPQRS7
8tuvTUV8tu
9w x y zWXYZ 9
Press Keyone timetwo timesthree timesfour timesfive times
2ABC2A
3DEF3D
4GH I 4G
5JKL5J
6MNO6M
7PQRS7
8TUV8T
9WX Y Z 9
 
						

							Menu and features
205
D
Special characters and symbols
Press l, # or 0, then press d or c to move the cursor to the symbol or character you want. Press 
OK to choose it. The symbols and characters below will appear depending on your menu 
selection.
Press lfor (space) !  # $ % & ’ ( ) l + , - . / m
Press #for : ; < = > ? @ [ ] ^ _ \ ~ ` | { } 
Press 0for Ä Ë Ö Ü À Ç È É 0 
 
						

							206
E
GeneralE
1When making a copy from one sheet
2Measured in accordance with ISO 9296.
SpecificationsE
Printer TypeLED
Print MethodElectrophotographic LED
Memory Capacity64 MB 
LCD (liquid crystal display)16 characters × 2 lines
Power Source220 - 240 V AC 50/60Hz
Power ConsumptionPeak: 1176 W
Copying:
Average 480 W
1
Sleep: (MFC-9120CN) Average 11 W
(MFC-9320CW) Average 12 W
Standby: Average 75 W
Dimensions
 
WeightWithout Drum/Toner Unit:  20.1  kg
Noise level Sound power
Operating 
(Colour Copying):
2
LWAd = 6.42 Bell (A)
Operating 
(Monochrome Copying):L
WAd = 6.46 Bell (A)
Office equipment with L
WAd > 6.30 Bell (A) is not suitable for use 
in room where people do primarily intellectual work. Such 
equipment should be placed in separate rooms because of the 
noise emission.
Standby: L
WAd = 4.31 Bell (A)
Sound pressure
Operating (Printing): L
PAm 53 dB (A)
Standby: L
PAm 30 dB (A)
428 mm491 mm
401 mm
 
						

							Specifications
207
E
TemperatureOperating: 10 to 32.5°C
Storage: 0 to 40°C
HumidityOperating: 20 to 80% (without condensation)
Storage: 10 to 90% (without condensation)
ADF (automatic document 
feeder)Up to 35 pages (Staggered) [80 g/m
2]
Recommended Environment for Best Results:
Temperature: 20 to 30°C
Humidity: 50% - 70%
Paper:
Xerox Premier TCF 80 g/m
2 or 
Xerox Business 80 g/m
2
Paper Tray
250 Sheets [80 g/m2]
 
						

							208
Print mediaE
1For labels, we recommend removing printed pages from the output paper tray immediately after they exit the machine 
to avoid the possibility of smudging.
2When using paper that is smaller than 105 × 148 mm (or A6 size) open the back cover (back output tray).
Paper Input  Paper Tray
„Paper Type: Thin paper, Plain paper or Recycled paper
„Paper Size: Letter, A4, B5 (ISO), A5, A5 (Long Edge), 
B6 (ISO), A6, Executive, Legal and Folio
„Paper Weight:
60 to 105 g/m
2
„Maximum Paper Tray 
Capacity:Up to 250 sheets of 80 g/m2 Plain Paper
Manual Feed Slot
„Paper Type: Thin paper, Plain Paper, Thick paper, 
Thicker Paper, Bond paper, Recycled 
Paper, Envelopes or Labels
1
„Paper Size:
Width: 76.2 to 220 mm2
Length:116 to 406.4 mm2
„Paper Weight:
60 to 163 g/m2
Paper OutputUp to 100 sheets (face down print delivery to the output paper tray)