Xerox WorkCentre Pro 128 User Manual

							Properties 
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 171Protocol SettingsUnicode Support – Allows you to specify whether to enable 
Unicode support in the host name and workgroup name 
during SMB transmission.
Auto Master Mode – Allows you to enable or disable (on/off) 
Auto Master Mode.
Encrypt Password – Allows you to enable or disable 
password encryption during SMB transmission.
NetWare
Allows you to configure the settings for NDS, transport 
protocol and SLP, as follows.
Host Name – Enter the host name.
Active Mode – Selects the Active Mode for the printer when 
using NetWare.
• Bindery:PServer Mode: Select this when using the printer 
server mode in bindery service.
• Directory:PServer Mode: Select this when using the 
printer server mode in directory service.
File Server Name – Enter the file server name.
Polling Interval – Allows you to set the time interval from 
when print data enter the print queue until printing starts.
Number of searches – Enter the maximum number of 
searches.
Password – Enter the print server (PServer) password.
Re-enter Password – Allows you to verify the PServer 
password by re-entering the same password.
TBCP Filter – This is only displayed when PostScript is 
enabled.
NDS – Configure the NDS settings.
Tree Name – Enter the tree name.
Context Name – Enter the context name of the Print Server 
Object. Up to 511 characters can be entered, with the 
exception of + (plus sign),  (backslash), and ~ (tilde).
Transport Protocol (IPX/SPX) – Configure the IPX/SPX 
settings.
Frame Type – Select the frame type.
• Auto: Automatically configures the active frame type. 
• Ethernet II: Selects Ethernet frame type. 
• Ethernet 802.3: Selects IEEE802.3 frame type. 
• Ethernet 802.2: Selects IEEE802.3/IEEE802.2 frame 
type.
• Ethernet SNAP: Selects IEEE802.3/IEEE802.2/SNAP 
frame type.
Network Address – Displays the network address in the 
XXXXXXXX:XXXXXXXXXXXX format.
SLP – SLP will only be displayed when NetWare is selected 
in Port Status and TCP/IP is selected as the Transport 
Protocol.
Active Discovery – Allows you to enable or disable the 
automatic detection of the SLP directory agent.
Feature Setting items
Downloaded From ManualsPrinter.com Manuals 
						

							9 CentreWare Internet Services 
172 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide Protocol Settings TCP/IP
Allows you to configure the following TCP/IP settings. 
Host Name – Enter the host name.
Get IP Address – Allows you to set the method for obtaining 
the IP address by selecting the drop down menu to access 
the following options.
• Manual: The user will specify all the addresses.
• DHCP: The address will automatically be set via DHCP.
• BOOTP: The address will automatically be set via 
BOOTP.
• RARP: The address will automatically be set via RARP.
• DHCP/Autonet: The address will be automatically set by 
Autonet via DHCP.
IP Address – Enter the IP address allocated to the printer in 
the xxx.xxx.xxx.xxx format.
Subnet Mask – Enter the subnet mask in the xxx.xxx.xxx.xxx 
format.
Gateway Address – Enter the gateway address in the 
xxx.xxx.xxx.xxx format.
DNS
Allows you to configure DNS settings as follows.
• Get DNS Address – Allows you to enable or disable the 
automatic setting of the DNS server address via DHCP.
• DNS Address 1–3 – Enter the DNS address 1, DNS 
address 2 and DNS address 3 in the xxx.xxx.xxx.xxx 
format.
• DNS Name – Enter the DNS domain name.
• Generate Domain Search List Automatically – Allows you 
to enable or disable the automatic setting to generate the 
domain search list.
• Domain Name 1–3 – Enter the domain name for domain 
name 1, domain name 2 and domain name 3.
• Connection Time-Out – Allows you to specify the time-out 
period when searching the domain.
• Dynamic DNS Update – Allows you to enable or disable 
the dynamic DNS update.
WINS Server
• Get WINS Server Address – Allows you to enable or 
disable the automatic setting of the primary and 
secondary WINS server address via DHCP.
• Primary WINS Server Address – Enter the primary WINS 
address in the xxx.xxx.xxx.xxx format.
• Secondary WINS Server Address – Enter the secondary 
(backup) WINS address in the xxx.xxx.xxx.xxx format.
Feature Setting items
Downloaded From ManualsPrinter.com Manuals 
						

							Properties 
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 173Protocol Settings IP Address List
Allows you to limit the IP address used for receiving print 
data when TCP/IP is enabled.
• IP Filter – Allows you to enable or disable IP filtering.
• No. – Displays the entry number of the IP address list 
from 1 to 10.
• Permitted IP Address – Enter the IP address for receiving 
print data when TCP/IP is enabled.
• IP Mask – Enter an IP address mask for each IP address 
entered in permitted IP address.
LPD
Allows you to configure the time-out settings for the LPD 
port.
Port Number – Allows you to configure the port number. The 
default is “515”.
TBCP Filter – This is only displayed when PostScript is 
enabled.
Connection Time-Out – Allows you to specify the connection 
time-out period when transmission fails.
SNMP
Allows you to configure the following options when 
accessing the printer via SNMP.
Community Name (Read Only) – Enter the community name 
used for display.
Community Name (Read/Write) – Enter the community 
name for display and update.
Community Name (Trap Notification) – Enter the trap 
notification community name.
System Administrator – Enter the name of the System 
Administrator.
Trap Notification Settings – Allows you to set the trap 
destination addresses.
IPP
Allows you to configure the following options when using IPP 
(Internet Printing Protocol).
Port Number – The default IPP port number 631 will be 
displayed. This is a display-only item.
Add Port No. – Enter the port number. 
TBCP Filter – Only displayed when PostScript is enabled.
Administrator Mode – Allows you to enable or disable the 
Administrator Mode.
DNS – Allows you to configure whether to enable/disable 
DNS.
Connection Time-Out – Allows you to specify the connection 
time-out period when transmission fails.
Feature Setting items
Downloaded From ManualsPrinter.com Manuals 
						

							9 CentreWare Internet Services 
174 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide Protocol Settings Port9100
Allows you to configure the time-out settings for the Port9100.
Port Number – Enter a value for the port number between 
8000 and 9999.
TBCP Filter – Only displayed when PostScript is enabled.
Connection Time-Out – Allows you to specify the connection 
time-out period when transmission fails.
E-mail
Allows you to configure the e-mail and Internet Fax settings as 
follows.
Receiving Protocol – Allows you to select the receiving 
protocol for the job.
Print Mail Headers and Contents – Allows you to select the 
print e-mail headers and contents option.
Print Internet Fax Headers and Contents – Allows you to 
select the print Internet Fax headers and contents option.
Auto Print Delivery Confirmation Mail – Allows you to enable 
or disable printing delivery confirmation e-mail, and printing 
undelivered mail.
Auto Print Error Mail – Allows you to specify whether to print 
the error e-mail automatically.
Maximum E-mail Size – Allows you to specify the maximum 
e-mail size.
Max. No. of pages for Split Send – Allows you to set the size 
of outgoing e-mail in pages.
Response to Read Receipts (MDN) – Select whether to send 
a confirmation to MDN.
POP3 Server Address – Enter the POP3 server address. Up 
to 128 characters can be entered, including periods (.) and 
hyphens (-).
POP3 Port Number – Specify the POP3 port number.
POP Receive Authentication – Select to enable APOP 
authentication.
POP3 Server Check Interval – Enter the interval to check the 
POP3 server between 1 and 120 minutes in 1 minute increments.
POP User Name – Enter the POP user address.
POP User Password – Enter the POP user password.
SMTP Server Address – Enter the SMTP server address. Up 
to 128 characters can be entered, including. (period) and - 
(hyphen).
SMTP Port Number – Specify the SMTP port number.
SMTP Send Authentication – Select whether and how users 
are required to authenticate before sending e-mail using an 
SMTP server.
• Off: User authentication is not required to use an SMTP 
server.
• POP before SMTP: POP server authentication is required 
before using an SMTP server.
• SMTP Authentication: SMTP server authentication is 
required to send e-mail.
Feature Setting items
Downloaded From ManualsPrinter.com Manuals 
						

							Properties 
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 175Protocol SettingsSMTP Authentication User Name – Specify the user ID for 
SMTP authentication.
SMTP Authentication Password – Specify the password for 
SMTP authentication.
Domain Filtering - Receive – Allows you to specify whether 
to restrict incoming e-mail.
Permitted Domain – Enter the domain name to permit 
incoming mails when Domain Filter is enabled.
HTTP
Allows you to configure the HTTP protocol settings as 
follows.
Port Number – Enter the port number that receives requests 
from the browser.
Maximum Sessions – Enter the maximum number of 
sessions between 1 and 15.
Connection Time-Out – Allows you to specify the connection 
time-out period when transmission fails.
UPnP
Allows you to specify the port number for UPnP.
Port Number – Specify the UPnP port number.
SSDP
Allows you to configure the SSDP protocol settings as 
follows.
Valid Advertising Period – Specify the time during which the 
advertising period remains valid.
Maximum TTL – Specify the maximum TTL.
LDAP
Allows you to configure the LDAP protocol settings as 
follows.
LDAP Server Address – Enter the LDAP server address.
Port Number – Specify the LDAP port number.
Emulation Settings Print Mode
Allows you to specify the type of printer language to use 
when a print job is sent using Parallel, USB, EtherTalk, SMB, 
NetWare, LPD, IPP, or Port9100. Only the enabled protocol 
will be displayed.
Auto – Allows you to set the machine so that it will 
automatically determine and use the most suitable language 
to print data received from the host device.
PostScript – Sets PostScript as the printer language.
PCL – Sets PCL as the printer language.
TIFF – Sets TIFF as the printer language.
PJL – Allows you to enable or disable PJL. PJL is a 
command independent of printer languages. You can specify 
the printer language to use for the next job regardless of the 
printer language that is currently being used.
Feature Setting items
Downloaded From ManualsPrinter.com Manuals 
						

							9 CentreWare Internet Services 
176 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide Emulation Settings PostScript
Allows you to configure the settings when PostScript is 
enabled as follows.
Logical Printer Number – Enter the logical printer number 
and click the [Edit] button.
Paper Tray – Allows you to select the paper tray.
Output Size – Allows you to select the paper size.
Output Destination – Allows you to select the destination for 
your output.
Print Quantity Setup – Allows you to select the print quantity 
setup that has priority over other settings.
Quantity – Allows you to specify the print quantity.
2 Sided Print – Allows you to select whether to print both 
sides of paper.
Collated – Allows you to specify whether to collate the 
output.
Offset Stacking – Allows you to select the offset method.
Stapling – Allows you to select the stapling method.
Screen Type – Allows you to specify the screen type 
settings.
Image Enhancement – Allows you to specify whether to 
enable or disable image enhancement.
Resolution – Allows you to specify the resolution.
Bypass Tray - Wait User – Allows you to specify whether to 
enable/disable this feature when the Tray 5 (Bypass) is 
selected.
TIFF
Allows you to configure the settings when TIFF is enabled.
Logical Printer Number – Enter the logical printer number 
and click the [Edit] button.
Memory Settings – Allows you to select a memory setting 
when the machine is switched off/on.
Document Size – Allows you to select image size or 
standard size.
Paper Tray – Allows you to select the paper tray.
Output Size – Allows you to select the paper size.
Output Destination – Allows you to select the destination for 
your output.
Print Quantity Setup – Allows you to select the Print Quantity 
Setup that has priority over other settings.
Quantity – Enter the number of sets to print when stored jobs 
is selected for Print Quantity Setup.
2 Sided Print – Allows you to select whether to print on both 
sides of paper.
Origin – Allows you to specify the origin of the coordinates.
Image Orientation – Allows you to select the orientation of 
the document.
Multiple Up – Allows you to specify settings for Multiple-Up.
Zoom – Allows you to specify the zoom ratio.
Variable Y% – Allows you to specify the Y% between 25 and 
100%.
Feature Setting items
Downloaded From ManualsPrinter.com Manuals 
						

							Properties 
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 177Emulation SettingsVariable X% – Allows you to specify the X% between 25 to 
100%.
Up/Down Adjustment – Allows you to specify a value 
between -250 and 250 mm (-9.8–9.8 inches) to adjust the 
vertical position.
Left/Right Adjustment – Allows you to specify a value 
between -250 and 250 mm  (-9.8–9.8 inches) to adjust the 
horizontal position.
Paper Margin – Allows you to specify a value between 0 and 
99 mm for the paper margin.
Collated – Allows you to specify whether to collate the output.
Stapling – Allows you to select the stapling method.
Image Enhancement – Allows you to enable or disable 
image enhancement. 
Bypass Tray - Wait User – Allows you to specify whether to 
enable or disable this feature when Tray 5 (Bypass) is 
selected.
PCL
This page allows you to configure the settings when PCL is 
enabled.
Paper Tray – Allows you to select the paper tray.
Output Size – Allows you to select the paper size.
Paper Size (Bypass) – Allows you to select the paper size for 
Tray 5 (Bypass).
Output Destination – Allows you to select the destination for 
your output.
Quantity – Allows you to specify the number of sets to print 
between 1 and 999.
2 Sided Print – Allows you to select whether to print both 
sides of paper.
Image Orientation – Allows you to select the image orientation.
Form Lines – Allows you to specify the page length (printing 
area) of one page. 
Font – Allows you to select the required font from the list of 
fonts available.
Font Size – Allows you to specify the font size between 4.00 
and 50.00 points in 0.25 point increments.
Font Pitch – Allows you to specify the font pitch between 
6.00 and 24.00 points in 0.01 point increments.
Symbol Set – Allows you to select the desired symbol set 
from the list of symbol sets available.
Handle CR As – Allows you to enable or disable carriage 
return and line feed for the PCL mode.
Handle LF and FF As – Allows you to enable or disable 
carriage return and line feed, and also carriage return and 
form feed, for the PCL mode.
HexDump – Allows you to enable or disable hexadecimal 
memory dump for the PCL mode.
Image Enhancement – Allows you to enable or disable 
image enhancement.
Feature Setting items
Downloaded From ManualsPrinter.com Manuals 
						

							9 CentreWare Internet Services 
178 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide Memory Settings Memory Settings
Allows you to change the settings for the free space 
available and the print page buffer size for Parallel, USB, 
EtherTalk, SMB, NetWare, LPD, IPP, Port9100, and 
PostScript memory.
Parallel – Enter the print page buffer of the parallel interface 
between 64 KB and 1024 KB in 32 KB increments.
USB – Enter the print page buffer of the USB interface 
between 64 KB and 1024 KB in 32 KB increments.
EtherTalk – Enter the print page buffer of the EtherTalk 
interface between 1024 KB and 2048 KB in 32 KB 
increments.
SMB – Select the spool destination for the job.
• Memory: Enter a value between 512 KB and 32 MB 
(32768 KB) in 256 KB increments.
• Hard Disk: The print page buffer text box will be blank and 
the value cannot be updated.
• Off: Enter a value between 64 KB and 1024 KB in 32 KB 
increments.
NetWare – Enter the print page buffer of NetWare between 
64 KB and 1024 KB in 32 KB increments.
LPD – Allows you to select the spool destination for the job.
• Memory: Enter a value between 512 KB and 32 MB 
(32768 KB) in 256 KB increments.
• Hard Disk: The print page buffer text box will be blank and 
the value cannot be updated.
• Off: Enter a value between 1024KB and 2048KB in 32 KB 
increments.
IPP – Allows you to select the spool destination for the job.
• Hard Disk: The print page buffer text box will be blank and 
the value cannot be updated.
• Off: Enter a value between 64 KB and 1024 KB in 32 KB 
increments.
Port9100 – Enter the print page buffer of the Port9100 
interface between 64 KB and 1024 KB in 32 KB increments.
PostScript Memory – Enter the PostScript working memory 
between 8192 KB and 98304 KB in 256 KB increments.
Feature Setting items
Downloaded From ManualsPrinter.com Manuals 
						

							Maintenance 
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 179
Maintenance
This page displays the Error History. It contains the following details on jobs where an 
error has occurred. Click the [Maintenance] tab on the Main Panel on the home page.
• Date/Time – Displays the date and time when the error occurred. Information is 
displayed in the form of mm/dd/yyyy hh:mm.
• Error Code – Displays the error code. Information is displayed in the form of xxx-yyy.
Support
This page displays the link to the customer support website. The name for the link 
displayed on the screen and the URL for the customer support website can be 
changed.
NOTE: The customer support website will not be displayed if the machine is not 
connected to Internet.
Changing the Settings
Click [Change Settings], enter the new name and URL for the website, then click [Apply 
New Settings].
NOTE: If the Administrator Mode is enabled, you will be prompted to enter the user ID 
and password before changes are made. The default user ID is “11111”, and the 
password is “x-admin”.
Downloaded From ManualsPrinter.com Manuals 
						

							9 CentreWare Internet Services 
180 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Downloaded From ManualsPrinter.com Manuals