Toshiba Strata Dk14, Dk40i, Dk424 System Record Sheets Manual

							System & Station
Program *31 – Group Pickup Assignments
Strata DK System Record Sheets 5/9947
System & Station
Program *31 – Group Pickup Assignments
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:All LEDs OFF




  6SNU
  +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
Processor TypePort RangePickup GroupsProcessor TypePort RangePickup Groups
DK14 000~009 8 RCTUBA/BB 000~079 20
DK40i 000~027 16 RCTUC/D 000~239 20
RCTUA 000~031 20 RCTUE/F 000~335 20
Pickup GroupLEDPort
Pickup Group 2020
Pickup Group 1919
Pickup Group 1818
Pickup Group 1717
Pickup Group 1616
Pickup Group 1515
Pickup Group 1414
Pickup Group 1313
Pickup Group 1212
Pickup Group 1111
Pickup Group 1010
Pickup Group 909
Pickup Group 808
Pickup Group 707
Pickup Group 606
Pickup Group 505
Pickup Group 404
Pickup Group 603
Pickup Group 202
Pickup Group 101
Station Logical Port Number
Enter the station logical port which will 
be assigned to a pickup group or groups. 
To add a port range, enter XXX

XXX 
(low port 

 high port).Light LED Buttons for the port specified in the last 
step. In the table below, mark an “X” for all LED 
Buttons which should be lit. 
						

							System & Station
Program 32 – Automatic Preference
48Strata DK System Record Sheets 5/99
Program 32 – Automatic Preference
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:Assigns Ringing Code 1 and Automatic Off-hook (Preference) Code 00 for all ports




  6SNU   +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Processor 
Ty p ePort Range
Port Reference NumberNumber of CO Line 
GroupsProcessor 
Ty p ePort Range
Port Reference NumberNumber of CO Line 
Groups
DK14 000~007 01~04 RCTUBA/BB 000~079 01~08
DK40i 000~027 01~08 RCTUC/D 000~239 01~16
RCTUA 000~031 01~08 RCTUE/F 000~335 01~16
Port NumberRinging CodeAutomatic 
Preference CodePort NumberRinging CodeAutomatic 
Preference Code
SELECT = Station Logical Port Number
Enter the port number of the station having 
preference defined. To add a port range, 
enter XXX

XXX (low port 
 high port).
DATA = Ringing Code
0 = Disable Ringing Line Preference
1 = Enable Ringing Line PreferenceAutomatic Preference Code:
00 = No selection
01 = [PDN]
02 = Lowest CO, Tie, or DID line
11~26 = 01~16 Line groups 
(See legend below for maximum line groups.) 
						

							System & Station
Program *32 – RS-232 Voice Mail Message Center Port
Strata DK System Record Sheets 5/9949
System & Station
Program *32 – RS-232 Voice Mail Message Center Port
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:Blank
Program *32 Overview
This program assigns which Voice Mail Message Center port number will be called when a station 
user presses the flashing 
0VJ button. When using SMDI or DTMF voice mail integration, the 
Voice Mail Port Message Center must be assigned for each station. The Message Center port must 
be the lowest voice mail standard telephone port in the Program 31 Voice Mail Group. It is 
normally the same port for all stations.




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Processor TypePort RangeProcessor TypePort Range
DK14 008~009 RCTUBA/BB 000~079
DK40i 008~027 RCTUC/D 000~239
RCTUA 000~031 RCTUE/F 000~335
PortMW Center PortPortMW Center PortPortMW Center PortPortMW Center Port
SELECT = Station Logical Port Number
(see ranges below)
Enter the port number having a Message 
Center assigned. Enter all station ports 
using the same Voice Mail machine.
To add a port range, enter XXX

XXX 
(low port 

 high port).VM PORT = Voice Mail Message Port
Enter the Voice Mail Message Center Port 
number (see ranges below) that should be 
assigned to each station.
Enter the lowest KSTU2, QSTU2 or RSTU2 port 
number that is connected to the VM machine.
If VM ports are assigned to a Distributed Hunt 
(DH) Group in Program *40, enter the port 
number of the first DH Group member, not the 
DH Group port (900~915). See example following  
						

							System & Station
Program 33 – [PDN]/ [PhDN] Station Hunting (Voice Calls Only)
50Strata DK System Record Sheets 5/99
Program 33 – [PDN]/ [PhDN] Station Hunting (Voice 
Calls Only)
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:Blank




  6SNU   +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Processor[PDN] Port Range[PhDN] Port RangeProcessor[PDN] Port Range[PhDN] Port Range
DK14 000~009 500~509 RCTUBA/BB 000~079 500~579
DK40i 000~027 500~527 RCTUC/D 000~239 500~739
RCTUA 000~031 500~531 RCTUE/F 000~335 500~835
Hunt FromHunt ToHunt FromHunt ToHunt FromHunt ToHunt FromHunt To
SELECT = [PDN] or [PhDN] Port 
Reference Number of the “hunt-from” 
station.
To add a port range, enter XXX

XXX 
(low port 

 high port).HUNT TO = [PDN] or [PhDN] Port Reference 
Number of the “hunt-to” station.
Press LED Button 01 to delete digit from the 
“hunt-to” port. 
						

							System & Station
Program *33 – [PhDN] Owner Telephone Assignment
Strata DK System Record Sheets 5/9951
System & Station
Program *33 – [PhDN] Owner Telephone Assignment
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:Blanks (no data)




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Processor[PhDN] Port 
Reference Number[PDN] Port RangeProcessor[PhDN] Port 
Reference Number[PDN] Port Range
DK14 500~509 000~009 RCTUBA/BB 500~579 000~079
DK40i 500~527 000~027 RCTUC/D 500~739 000~239
RCTUA 500~531 000~031 RCTUE/F 500~835 000~335
[PhDN] Port 
Reference 
NumberOwner Telephone 
(Program 04)
Port Number[PhDN] Port 
Reference 
NumberOwner Telephone 
(Program 04)
Port Number[PhDN] Port 
Reference 
NumberOwner Telephone 
(Program 04)
Port Number
SELECT = [PhDN] Port Reference Number Enter the [PDN] Owner Station Logical Port 
Number. 
						

							System & Station
Program 34 – Hold Recall Timing
52Strata DK System Record Sheets 5/99
Program 34 – Hold Recall Timing
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:Assigns a Hold Recall Time of 032 seconds to all ports




  6SNU   +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
ProcessorPort RangeProcessorPort Range
DK14 000~009 RCTUBA/BB 000~079
DK40i 000~027 RCTUC/D 000~239
RCTUA 000~031 RCTUE/F 000~335
PortSecondsPortSecondsPortSecondsPortSeconds
SELECT = Station Logical Port Number
Enter the port number having its Hold 
Recall Time defined.
To add a port range, enter XXX

XXX 
(low port 

 high port).HUNT TIME = Seconds
Enter the number of seconds the system will 
wait (three digits).
Enter 000 for no Hold Recall. Enter 011~160 for 
11 to 160 seconds. 
						

							System & Station
Program *34 – Station Class Of Service
Strata DK System Record Sheets 5/9953
System & Station
Program *34 – Station Class Of Service
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:LED 01 ON for all ports




  6SNU
  +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorPort RangeProcessorPort Range
DK14 000~009 RCTUBA/BB 000~079
DK40i 000~027 RCTUC/D 000~239
RCTUA 000~031 RCTUE/F 000~335
FeatureLEDPort
20
19
18
17
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
Camp-on Tone to standard telephone, 
DKT, or EKT handset/Spkr01
SELECT = Station Logical Port Number
Enter the port number(s) being defined.
To add a port range, enter XXX

XXX 
(low port 

 high port).LED = Select LEDs to light for the port 
specified in the last step. Mark an “X” in the 
table below for all LEDs which should be lit. 
						

							System & Station
Program 35 – Station Class of Service
54Strata DK System Record Sheets 5/99
Program 35 – Station Class of Service
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:LED 01, 02, 04, 05, 16 are ON, all other LEDs OFF.




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorPort RangeMaximum LCD Phones With 
Personal MessagesProcessorPort RangeMaximum LCD Phones With 
Personal Messages
DK14 000~009 8 RCTUBA/BB 000~079 32
DK40i 000~027 16 RCTUC/D 000~239 96
RCTUA 000~031 16 RCTUE/F 000~335 96
FeatureLEDPort
Busy Station Transfer 20
Busy Station Ringing 19
Automatic Hold 18
DKT 2000 Telephone 
Continuous DTMF Tones 
OFF17
No CF/NA Handsfree or OCA 16
Not used 15
Toll Restriction After Answer 14
Toll Restriction After Answer 13
Not used 12~07
Disable Hold Display 
Scrolling (Release 3.2 and 
higher)06
LCD Personal Message 
(10~19) Allowed05
Message Waiting (RCV) 04
Message Waiting Lamp 
Standard. Telephones03
LCD Type/32-ON/12-OFF 02
LCD Display 01
SELECT = Station Logical Port Number
Enter the port number(s) being defined.
To add a port range, enter XXX

XXX 
(low port 

 high port).LED = Select LEDs to light for the port 
specified in the last step. Mark an “X” in the 
table below for all LEDs which should be ON. 
						

							System & Station
Program 36 – Fixed Call Forward
Strata DK System Record Sheets 5/9955
System & Station
Program 36 – Fixed Call Forward
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:Does not assign a Fixed Call Forward location to any port




  6SNU   +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Processor[PDN] Port 
Range[PhDN] Port 
RangeDH Group 
PortsProcessor[PDN] Port 
Range[PhDN] Port 
RangeDH Group 
Ports
DK14 000~009 500~509 900~915 RCTUBA/BB 000~079 500~579 900~915
DK40i 000~027 500~527 900~915 RCTUC/D 000~239 500~739 900~915
RCTUA 000~031 500~531 900~915 RCTUE/F 000~335 500~835 900~915
PortForward to Tel PortPortForward to Tel PortPortForward to Tel PortPortForward to Tel Port
SELECT = Station Logical Port Number
Enter the port number of the station that 
needs a Fixed Call Forward location 
assigned.
To add a port range, enter XXX

XXX 
(low port 

 high port).FORWARD TO TEL = Port Number
Enter the port number of the [PDN], [PhDN] or 
DH [DN] that will be call forwarded to when the 
)L[HG&DOO)RUZDUG button is pressed.
[PhDNs] or DH [DNs] can be entered with DK 
Release 3.2 and above software only. 
						

							System & Station
Program *36 – System NT Button Lock Password Changing Station Assignment
56Strata DK System Record Sheets 5/99
Program *36 – System NT Button Lock Password 
Changing Station Assignment
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:000




  6SNU
  +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorPort RangeProcessorPort Range
DK14 000~009 RCTUBA/BB 000~079
DK40i 000~027 RCTUC/D 000~239
RCTUA 000~031 RCTUE/F 000~335
Tenant NumberNT Lock Station or Console Port
1
2
3
4
Tenant Number 1~4 DATA = Station port designated as Night Transfer Lock 
Password Change Station for selected tenant.