Toshiba Strata Dk14, Dk40i, Dk424 System Record Sheets Manual

							ISDN
ISDN
Program *62 – Non-ISDN Station Bearer Service
Strata DK System Record Sheets 5/99167
Program *62 – Non-ISDN Station Bearer Service
Processor Type:DK40i, All RCTUs (Release 4.0 or higher)
Program Type:System, PRI and BRI
Initialized Default:see below




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
DataPad Level (db)DataPad Level (db)
00 4-12
1-3 5-15
2-6 6-18
3-9 7+3
 *62-1
Bearer 
Service  *62-2
Outgoing 
Pad Level *62-3
Incoming 
Pad Level 
Station Ports
Station Logical Port Number
Enter the port number(s) being defined. To add a 
port range, enter XXX

XXX (low port 
 high port). SEL =  1~3
1 - Bearer Service
2 - Outgoing Call
3 - Incoming Call
DATA = Bearer Service (0 or 1)
0 - 3.1 kHz Audio (faxes)
1 - Speech
For options 2 and 3, enter the 
Pad Level. See legend below. 
						

							ISDN
Program *63 – ISDN Dialing Parameters
168Strata DK System Record Sheets 5/99
Program *63 – ISDN Dialing Parameters
Processor Type:DK40i, All RCTUs (Release 4.0 or higher)
Program Type:System, PRI and BRI
Initialized Default:4 seconds
Program *64-1 – Direct Inward Dialing Parameters
Processor Type:DK40i, All RCTUs (Release 4.0 or higher)
Program Type:Trunk, PRI and BRI
Initialized Default:LED 01 ON for DID or DNIS programming




  6SNU
  +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
SelectTimeout ParameterVa lu eComments
1
Sub-address dialing Value 00 to 10 seconds (default 04)
2
Outdialing Value 02 to 10 second (default 04)




  6SNU
   +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
LEDLED ONLED OFF
01
Use DID/DNIS for incoming calls. Direct ring the called station.
Tru nk  
GroupsPortsLEDs
01
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DATA = Seconds 
(see table below)SEL = 1 or 2
(see table below)
LED 01: ON = Use DID/DNIS tables in 
Programs *09 or 71
OFF = Use direct ringing tables in 
Programs 81~89, *81, *84, *87
Enter the trunk group(s)
To add a range of trunk groups, 
enter XX*XX (low trunk group 

 
high trunk group)
SEL = 1 
						

							ISDN
ISDN
Program *64-2 – Number of DID/DNIS Digits for Trunk Groups
Strata DK System Record Sheets 5/99169
Program *64-2 – Number of DID/DNIS Digits for Trunk 
Groups
Processor Type:DK40i, All RCTUs (Release 4.0 or higher)
Program Type:System, PRI and BRI
Initialized Default:Blank




  6SNU
  +ROG  6SNU   +ROG 6SNU+ROG 6SNU+ROG
Trunk 
GroupsNumber of DID Incoming Call 
Digits per Trunk Group
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DATA = Enter the number of digits to 
use for incoming call DID digits (2~5) SEL = 2
Enter Trunk Group Number
To add a range of trunk groups, 
enter XX

XX (low trunk group 

 high trunk group) 
						

							ISDN
Program *65 – ISDN Channel Group Assignment
170Strata DK System Record Sheets 5/99
Program *65 – ISDN Channel Group Assignment
Processor Type:All RCTUs (Release 4.0 or higher)
Program Type:System, PRI
Initialized Default:All LEDS OFF (see Important! below)
NoteProgram *65 must be assigned before entering Program*66.




  6SNU
  +ROG  6SNU+ROG 6SNU+ROG 6SNU+ROG
ISDN
B-channel LinesRCTUARCTUBA/BBRCTUC/DRCTUE/F
PRI (T) 23 47 141 188
Channel 
GroupCO Line Ports (B-Channels)
1234567891011121314151617181920
1
2
3
4
5
6
7
8
GRP = Light LEDs to select PRI 
B-channels for the channel group.
Press 
6FUROO to advance or 3DJH to go back.
SEL = Channel Group (1~8) 
						

							ISDN
ISDN
Program *66-1 – Channel Group Number Parameters
Strata DK System Record Sheets 5/99171
Program *66-1 – Channel Group Number Parameters
Processor Type:All RCTUs (Release 4.0 or higher)
Program Type:Trunk, PRI
Initialized Default:Blank
NoteProgram *65 must be assigned before entering Program *66. If Program *65 changes, then 
this program will be affected. Program *66 defaults back to the settings in Program *65.




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Trunk Groups
12345678910111213141516
CHGP = Channel Group Number (1~8)SEL = 1
Enter the ISDN Trunk 
Group Number 
						

							ISDN
Programs *66-2 and *66-4 – Call-by-Call Trunk Group Codes and Network ID
172Strata DK System Record Sheets 5/99
Programs *66-2 and *66-4 – Call-by-Call Trunk Group 
Codes and Network ID
Processor Type:All RCTUs (Release 4.0 or higher)
Program Type:Trunk, PRI
Initialized Default:Blank
Program *66-4 Call-by-Call Network ID
Processor Type:All RCTUs (Release 4.0 or higher)
Program Type:Trunk, PRI
Initialized Default:Blank
Record Sheet
Use the record sheet for Program *66-2.




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Tr un k  
GroupFacility 
CodeService 
ParametersCarrier Code
(Prog. *66-4)Trunk 
GroupFacility 
CodeService 
ParametersCarrier Code
(Prog. *66-4)
19
210
311
412
513
614
715
816




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
SV = Service Parameters
Enter ISDN Trunk Group
FA = Enter the Facility Code
SEL = 2
SEL = 4ID = Network ID Code
(3 or 4 digits)
Enter ISDN Trunk 
Group Number 
						

							ISDN
ISDN
Program *66-3 – Channel Group/Trunk Parameters
Strata DK System Record Sheets 5/99173
Program *66-3 – Channel Group/Trunk Parameters
Processor Type:All RCTUs (Release 4.0 or higher)
Program Type:Trunk, PRI
Initialized Default:Blank
LEDs 03~06 specify the trunk types shown in the following table.




  6SNU
  +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
LEDsPOTSFXTie
(senderized)Tie 
(cutthrough)OutWATS
(IntraLATA)OutWATS
(InterLATA)InWATS
03 ON ON ON
04 ON ON ON ON
05ON
06 ON ON
LEDsSettingTrunk Groups
12345678910111213141516
01
ON:  Operator Calls Allowed/
OFF: Not allowed
02ON:  Carrier Access allowed 
OFF:  Not allowed
03Trunk Group Type (see above table).
04Trunk Group Type (see above table).
05Trunk Group Type (see above table).
06Trunk Group Type (see above table).
07~10Not Used
11ON:  Called Party Number Type Unknown  
OFF: Standard Called Party Number Type
12ON:  DK sends Ringback Tone to Network
OFF: No RBT to Network. 
(Default is ON.)
13ON: DMS CO switches only
OFF: Belcore (default is OFF.)
DATA = Light LEDS to assign 
features. See tables below. SEL = 3
Enter the ISDN Trunk
Group Number (01~16) 
						

							ISDN
Program *66-5 – Line Directory Number (LDN) Registration
174Strata DK System Record Sheets 5/99
Program *66-5 – Line Directory Number (LDN) 
Registration
Processor Type:DK40i, All RCTUs (Release 4.0 or higher)
Program Type:Trunk, PRI and BRI
Initialized Default:Blank




  6SNU
  +ROG  6SNU   +ROG 6SNU+ROG 6SNU+ROG
Ch. 
GroupLDN 
IndexLDNCh. 
GroupLDN 
IndexLDNCh. 
GroupLDN 
IndexLDN
LDN = Listed Directory Number
Use LED Button 01 to enter a blank.
Wild card (*) entries are valid.
Enter the Channel Group
0 = BRI
1~8 = PRI
Enter LDN Index (01~48)
SEL = 5 
						

							ISDN
ISDN
Program *66-6 – LDN/Trunk Group to Channel Group Assignments
Strata DK System Record Sheets 5/99175
Program *66-6 – LDN/Trunk Group to Channel Group 
Assignments
Processor Type:DK40i, All RCTUs (Release 4.0 or higher)
Program Type:Trunk, PRI and BRI
Initialized Default:Blank
 




  6SNU
  +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
Channel 
GroupIndexCO Line PortsChannel 
GroupIndexCO Line PortsChannel 
GroupIndexCO Line Ports
GRP = Select ISDN trunk ports for each LDN index.
Press 
3DJH or 6FUROO for the next CO line ports.
Enter the LDN Index (1~48)
SEL = 6
Enter the Channel Group Number: 
0 = BRI; 1~8 = PRI 
						

							ISDN
Program *66-7 – LDN/Trunk Group Assignments
176Strata DK System Record Sheets 5/99
Program *66-7 – LDN/Trunk Group Assignments
Processor Type:All RCTUs (Release 4.0 or higher)
Program Type:Trunk, PRI
Initialized Default:Blank




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Channel 
GroupLDN 
IndexTrunk Groups
12345678910111213141516
DIR = Trunk Group (1~16).
0 = blank. The lowest POTS trunk 
group is used.
Enter the Channel 
Group Number (1~8)
Enter the LDN Index (1~48). 
See Program *66-5 SEL = 7