Toshiba Strata Dk14, Dk40i, Dk424 System Record Sheets Manual

							Strata DK System Record Sheets 5/997
System & Station
System & Station2
Program 01 – Station Logical Port Display and/or 
Change
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:Logical port number = physical port number 
Program 90, 91-1, or 91-9 initializes Program 01




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
Processor[PDN] Port RangeProcessor[PDN] Port Range
DK14 000~009 RCTUBA/BB 000~079
DK40i 000~027 RCTUC/D 000~239
RCTUA 000~031 RCTUE/F 000~335
To Save existing Logical Port6SNU
SELECT = Physical Port Number
The logical port number associated with 
the physical port displays after the 
physical port number is entered.Enter new Logical Port
to change existing Logical Port 
						

							System & Station
Program 02 – Station Physical Port Display and/or Change
8Strata DK System Record Sheets 5/99
Program 02 – Station Physical Port Display and/or 
Change
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:Logical port number = physical port number
Program 90, 91-1, or 91-9 initializes Program 02
Program 03 for DK14 – Slot Assignments
When DK14 is powered ON, Program 03 automatically assigns the correct codes for installed 
PCBs. No record sheet is needed. Refer to the following table for PCB slot and slot code 
information:
DK14 Base KSU
Notes
lIn the DK14 software: QCDU2 digital ports are considered to be installed in slot 11. QCDU2 
CO lines are considered to be installed in slot 12.
lopt=QRCU3
lopt=Always assigns 8 ports (000~007), digital ports (OCA/DIU). No DSS allowed.
lAlways assigns 4 CO lines
lAlways assigns 2 ports (008, 009) standard telephone ports




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
Processor[PDN] Port RangeProcessor[PDN] Port Range
DK14 000~009 RCTUBA/BB 000~079
DK40i 000~027 RCTUC/D 000~239
RCTUA 000~031 RCTUE/F 000~335
WMAUDKUCOU
and QCDU2QSTU2None
Slot Number00 11 12 13 14
PCB Code91 or 92 62  11 00 or 31 00
PCB TypeQRCU3
OptionsOCA/DIU
Station Numbers000~007 008~009
CO Line Numbers001~004
To Save existing Physical Port6SNU
SELECT = Logical Port Number
The physical port number associated 
with the logical telephone port displays 
after the logical port number is entered.Enter new Physical Port
to change existing Physical Port 
						

							System & Station
Program 03 for DK40i – Flexible PCB Slot Assignments
Strata DK System Record Sheets 5/999
System & Station
Program 03 for DK40i – Flexible PCB Slot Assignments
Processor Type:DK40i
Program Type:System
Initialized Default:PCB codes of PCBs installed prior to running Program 91-1 or Program 91-9
Code 00 for empty slots (15~18), Base KSU has codes for PCBs




  6SNU   +ROG  6SNU +ROG Turn System Power OFF (5 sec) then ON
PCB Code Reference Table
PCB Fixed SlotCodePorts/Type
Common Control 91 None
Common Control w/K4RCU3 92 4 DTMF/ABR
Common Control w/K5RCU 
or K5RCU298 5 DTMF/ABR
PIOU/PIOUS/RSSU/PEPU 41 None
PEKU 21 8 EKT
PEKU with EOCU 22 8 EKT
PEKU with DSS 23 8 EKT
PEKU with EOCU, DSS 24 8 EKT
PESU 25 2 SLT/4 EKT
PESU with EOCU 26
KSTU2/RSTU2/Stratagy DK 31 4 SLT/8 SLT/
8VM
TCOU/PCOU/RCOU/RGLU2 11 4/CO
RCOU + RCOS 17 8 Loop CO
Base Unit DKT CKTs, PDKU, 
and RWIU61 8 DKT
Base Unit DKT CKTs 
& PDKU w/ DIU 
or SP-OCA62 8 DKT
Base Unit DKT CKTs and 
PDKU with DSS (w/ or w/o 
DIU or SP-OCA)64 8 DKT
KCDU 65 2/CO, 4 DKT
KCDU SP-OCA or DIU 66 2/CO, 4 DKT
RDSU (RSTS) 27 4 DKT/4 SLT
RDSU (RSTS) with DIU or 
SP-OCA28 4 DKT/4 SLT
RDDU/TDDU 16 4 DID Lines
REMU 13 4 Tie Lines
RCIU2/RCIS/TCIU2 81 4 or 8 Caller ID
TBSU or RBSU 77 2 BRI S/T
RBSU/RBSS 78 4 BRI S/T
TSIU No Code Required
None 00 None
more codes
...or
Run Program 91-2
SELECT = Slot Number (00, 11~18)
CARD = PCB Code (See Reference Table)
DK40i Base KSU
DK40i Expansion KSU
TMAU2DKUTBSU,
TCOU
or TDDUKSTU2TCIU2
Slot Number00 11 12 13 14
PCB Code91, 92 or
9862 or 64 00, 11, 
16, or 7700 or 31 00 or 81
PCB Type
Options
Station/BRI 
Port Numbers
CO/DID/BRI 
Line 
Numbers
Cabinet Label04050607
Slot Number15 16 17 18
PCB Code
PCB Type
Options
Station/BRI 
Port Numbers
CO/Tie/DID/BRI 
Line Numbers
  
						

							System & Station
Program 03 for DK424 – Flexible PCB Cabinet Slot Assignments
10Strata DK System Record Sheets 5/99
Program 03 for DK424 – Flexible PCB Cabinet Slot 
Assignments
Processor Type:All RCTUs
Program Type:System
Initialized Default:PCB codes of PCBs installed prior to running Programs 91-1 or 91-9;
Code 00 for empty slots




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG 
DK424 Base Cabinet 1
Slot Number00
(R11)01 
(RCTU)S11S12S13S14S15S16
PCB Code
PCB Type
Options
Station/Tie/DID/ISDN
Port Numbers
CO/Tie/DID/ISDN Line Numbers
DK424 Expansion Cabinet 2
Slot NumberS21S22S23S24S25S26S27S28
PCB Code
PCB Type
Options
Station/Tie/DID/ISDN
Port Numbers
CO/Tie/DID/ISDN Line Numbers
DK424 Expansion Cabinet 3
Slot NumberS31S32S33S34S35S36S37S38
PCB Code
PCB Type
Options
Station/Tie/DID/ISDN
Port Numbers
CO/Tie/DID/ISDN Line Numbers
DK424 Expansion Cabinet 4
Slot NumberS41S42S43S44S45S46S47S48
PCB Code
PCB Type
Options
Station/Tie/DID/ISDN
Port Numbers
CO/Tie/DID/ISDN Line Numbers
more codes
SELECT = Slot Number (00, 01, 11~78)
CARD = PCB Code (See Reference Table)Turn System Power OFF (5 sec) then ON.
or...
Run Program 91-2 
						

							System & Station
Program 03 for DK424 – Flexible PCB Cabinet Slot Assignments
Strata DK System Record Sheets 5/9911
System & Station
DK424 PCB Codes
See the following text for specific installation rules on the above PCBs. DK424 Expansion Cabinet 5
Slot NumberS51S52S53S54S55S56S57S58
PCB Code
PCB Type
Options
Station/Tie/DID/ISDN
Port Numbers
CO/Tie/DID/ISDN Line Numbers
DK424 Expansion Cabinet 6
Slot NumberS61S62S63S64S65S66S67S68
PCB Code
PCB Type
Options
Station/Tie/DID/ISDN
Port Numbers
CO/Tie/DID/ISDN Line Numbers
DK424 Expansion Cabinet 7
Slot NumberS71S72S73S74S75S76S77S78
PCB Code
PCB Type
Options
Station/Tie/DID/ISDN
Port Numbers
CO/Tie/DID/ISDN Line Numbers
PCBCodePorts/TypePCBCodePorts/Type
RCOU, RGLU2 11 4 Gnd./Loop Lines RDTU 71 8 T1 Channels
RCOU/RCOS 17 8 Loop CO Lines RDTU 72 16 T1 Channels
RDDU 16 4 DID Lines/4 Stations RDTU 7324 T1­channels
REMU 13 4 Tie Lines/4 Stations RCTU 91 None
PEKU 21 8 Stations RCTU (with 4-CKT RRCS) 92 None
PEKU (EOCU) 22 8 Stations RCTU (with 8-CKT RRCS) 93 None
PEKU w/DSS 23 8 Stations RCTU (with 12-CKT RRCS) 94 None
PEKU (DSS, EOCU) 24 8 Stations NONE 00 00
PESU 25 6 Stations RATU 51 4 Stations
PESU (OCA) 26 6 Stations RSIU 49 I/O Interface
RDSU/RSTS 27 8 Stations RCIU2/RCIS 81 8 CKT, Caller ID
RDSU/RSTS (OCA, DIU) 28 8 Stations Stratagy DK 31 8 VM Ports
RSTU2 31 8 Stations RBUU without RBUS  75 2 U Interfaces 
(4 stations/4 CO lines)
PIOU, PIOUS/ RSSU, PEPU 41 Remote Maintenance (TTY) RBUU with RBUS 76 4 U Interfaces
(8 stations/8 CO lines)
PIOU/PIOUS/RSSU 42 MIS for ACD (TTY) RBSU without RBSS 77 2 S/T Interfaces
(4 stations/4 CO lines)
PIOU/PIOUS/RSSU 43 SMDI VM Interface (TTY) RBSU with RBSS  78 4 S/T Interfaces
(8 stations/8 CO lines)
PDKU2, RWIU 61 8 Stations RPTU Interface Card 79 PRI Interface
(24 CO lines)
PDKU2 (OCA, DIU) 62 8 Stations
PDKU2 (DSS, OCA, DIU) 64 8 Stations 
						

							System & Station
Program *03 for DK424 – Cabinet Type Identification
12Strata DK System Record Sheets 5/99
Program *03 for DK424 – Cabinet Type Identification
Processor Type:RCTUE/F only
Program Type:System
Initialized Default:All cabinets = 1




  6SNU
  +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG 
SELECT = 
(Cabinet No. 1~7)Cabinet Type
(1 or 2)
1 (Base)
2 (1st Expansion)
3 (2nd Expansion)
4 (3rd Expansion)
5 (4th Expansion)
6 (5th Expansion)
7 (6th Expansion) 1 only
SELECT = Cabinet No. (1~7)
CABINET = 1 or 2 (type)
Type 1 (DK424)
Type 2 (DK280)Turn System Power OFF (5 sec) then ON.
or...
Run Program 91-2
Expansion Cabinet Universal PCB Slot Availability
Case 1
RCTUE/F in DK424 Base Cabinet with MBJU removed
Case 2
RCTUE/F in DK280 Base Cabinet
Expansion Cabinet (max 6)Universal PCB Slots
DK424 1~8 available
DK280 1~6 available
Expansion Cabinet (max 5)Universal PCB Slots
DK424 1~6 available
DK280 1~6 available 
						

							System & Station
Program 04 – Station Logical Port [PDN] Assignment
Strata DK System Record Sheets 5/9913
System & Station
Program 04 – Station Logical Port [PDN] Assignment
Processor Type:DK14, DK40i, All RCTUs
Program Type:Station
Initialized Default:See [PDNs] in the record sheets
DK14 Record Sheet
 
1. Supports a Digital Telephone or a DDCB Door Phone Control Box.
2. Supports Alternate Background Music (BGM).




  6SNU   +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Physical 
Ports Modular Jack 
Location RecordLogical 
Ports [PDNs]
(Initialized)Port Type for Different Base Configurations
KSU1st QCDU22nd QCDU2QSTU2
000 000
(10)
4 - Digital 
Telephone 
Ports 001 001
(11)
002
10021(12)
003
10031(13)
004 004
(14)2 -Digital 
Telephone 
Ports 005 005
(15)
006 006
(16)
2 - Digital 
Telephone 
Ports 007 007
(17)
008 008
(18)
2 - Standard 
Telephone 
Ports 009
20092(19)
SELECT = Station Logical Port Number(s)
(see table below)[PDN] (1~4 digits) 
						

							System & Station
Program 04 – Station Logical Port [PDN] Assignment
14Strata DK System Record Sheets 5/99
DK40i Record Sheet
Important!Refer to Chapter 2 – DK40i Configuration before installing PCBs in slots 15~18.
Expansion Slot Configuration Record: Slot 15 ______  Slot 16 ______  Slot 17 ______  Slot 18 ______ 




  6SNU   +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Physical 
PortsModular Jack 
Location RecordLogical Ports[PDNs]
(Initialized)
Port Type for Different Base Configurations
TCOU or TDDUTCOU, TBSU 
or 
TDDU+KSTU2TBSUTBSU+KSTU2
000 000
(10)
Base Slot 11
8 - Digital 
Telephone 
PortsBase Slot 11
8 - Digital 
Telephone 
PortsBase Slot 11
8 - Digital 
Telephone 
PortsBase Slot 11
8 - Digital 
Telephone 
Ports 001 001
(11)
002 002
(12)
003 003
(13)
004 004
(14)
005 005
(15)
006 006
(16)
007 007
(17)
008 008
(18)
Expansion 
Slots 15~18Base Slot 13
4 KSTU2 PortsBase Slot 12*
TBSU CKT 1
2 Ports
Base Slot 12*
TBSU CKT 2
2 PortsBase Slot 12*
TBSU CKT 1
2 Ports
Base Slot 12*
TBSU CKT 2
2 Ports 009 009
(19)
010 010
(20)
011 011
(21)
012 012
(22)
Expansion 
Slots 15~18Expansion 
Slots 15~18Base Slot 13
4 KSTU2 Ports 013 013
(23)
014 014
(24)
015 015
(25)
016 016
(26)
Expansion 
Slots 15~18 017 017
(27)
018 018
(28)
019 019
(29)
020 020
(30)
021 021
(31)
022 022
(32)
023 023
(33)
024 024
(34)
025 025
(35)
026 026
(36)
027 027
(37)
NoteExpansion slots 15~18: See DK40i Configuration tables in Chapter 2 of the Strata DK Installation and 
Maintenance Manual.
*If TBSU circuits that are set as station-side in Program *60, use two station ports per circuit. TBSU circuits 
that are set to line-side do not use station ports.
SELECT = Station Logical Port Number(s)
(see table below)[PDN] (1~4 digits)Logical 
Ports 
(Initialized) 
						

							System & Station
Program 04 – Station Logical Port [PDN] Assignment
Strata DK System Record Sheets 5/9915
System & Station
DK424 Record Sheet




  6SNU   +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Processor[PDN] Port RangeInitialized [PDNs]DISA PortReserved for Special Functions
RCTUA 000~031 200~231 039 032~039
RCTUBA/BB 000~079 200~279 089 080~089
RCTUC/D 000~239 200~239 249 240~249
RCTUE/F 000~335 100~435 344 336~349
Physical 
PortsModular Jack 
Location RecordLogical 
Ports [PDN]Cabinet and 
Slot NumberPhysical 
PortsModular Jack 
Location RecordLogical 
Ports [PDN]Cabinet and 
Slot Number
Cabinet: 
______
Slot: ______
Cabinet: 
______
Slot: ______
Cabinet: 
______
Slot: ______
Cabinet: 
______
Slot: ______
Cabinet: 
______
Slot: ______
Cabinet: 
______
Slot: ______
Cabinet: 
______
Slot: ______
Cabinet: 
______
Slot: ______
SELECT = Station Logical Port Number(s)
Press [PDN] or Button LED 01 to erase (1~4 digits) 
						

							System & Station
Program *04 – [PhDN] and Distributed Hunt [DN] Assignments For Internal and Tie Line Calls
16Strata DK System Record Sheets 5/99
Program *04 – [PhDN] and Distributed Hunt [DN] 
Assignments For Internal and Tie Line Calls
Processor Type:DK14, DK40i, all RCTUs
Program Type:Station
Initialized Default:See the legend below




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Processor[PhDN] Port RangeInitialized [PhDN]DH [DN] Port RangeInitialized DH [DN]
DK14 500~509 50~59 900~915 850~865
DK40i 500~527 50~77 900~915 850~865
RCTUA 500~531 500~531 900~915 850~865
RCTUBA/BB 500~579 500~579 900~915 850~865
RCTUC/D 500~739 500~739 900~915 850~865
RCTUE/F 500~835 450~785 900~915 850~865
[PhDN] or DH [DN]
Port XXXInitialized 
[PhDN] or DH 
[DN] (YYYY)[PhDN] or DH [DN]
Port XXXInitialized 
[PhDN] or DH 
[DN] (YYYY)[PhDN] or DH [DN]
Port XXXInitialized 
[PhDN] or DH 
[DN] (YYYY)
SELECT = [PhDN] or DH [DN] Port Number 
(see table below)
To erase existing [PDNs], enter XXX

XXX 
(low port 

 high port). Adding a new range of 
[PDNs] cannot be done in this manner.[PhDN] or DH [DN] assigned to port number
(1~4 digits, see table below)
Press LED Button 01 to erase [PhDNs] and 
DH[DNs].