Toshiba Strata Dk14, Dk40i, Dk424 System Record Sheets Manual

							Toll Restriction
Program 45-1 – LCR/Toll Restriction Dial Plan
Strata DK System Record Sheets 5/99117
Toll Restriction
Program 45-1 – LCR/Toll Restriction Dial Plan
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:Assigns Dial Plan 7 to the system (current North American Numbering Plan)
Where:




  6SNU   +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
XPlanToll Restriction/LCR Dial Plans
9(101XXXX)+1+NXX+NXX/NXX
8(101YXXX)+1+NXX+NXX/NXX
7(10XXX)+1+NXX+NXX/NXX
6For UK only.
50+ (0+ and universal (Codes 5 and 4) are not used in USA.)
4Universal (0+ and universal (Codes 5 and 4) are not used in USA.)
3(10XXX)+1+AC+NXX/NXX
2(10XXX)+1+AC+NXX/1+NNX
1(10XXX)+AC+NXX/1+NNX
In NXX and NNX,
X =
N =0~9
2~9
NXX =Office code (interchangeable with area and office codes; second digit can be 
0~9)
NNX =Office code (not interchangeable; second digit cannot be 1 or 0)
AC =Area Code
1+ NNX =1 may be dialed before office codes
10XXX =old 5-digit Carrier Access Codes
101YXXX/101XXXX =new 7-digit Carrier Access Codes
Y =0, 5 or 6
DATA = Plan 1~9
Enter Codes 1~9 to indicate the 
dial plan for the system.SELECT = 1 
						

							Toll Restriction
Program 45-2 – Toll Restriction Disable
118Strata DK System Record Sheets 5/99
Program 45-2 – Toll Restriction Disable
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:All LEDs OFF for all CO lines (all lines apply Toll Restriction)




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorCO Line RangeProcessorCO Line Range
DK14 001~004 RCTUBA/BB 001~048
DK40i 001~012 RCTUC/D 001~144
RCTUA 001~016 RCTUE/F 001~200
LEDCO LineXLEDCO LineXLEDCO LineX
20 20 20
19 19 19
18 18 18
17 17 17
16 16 16
15 15 15
14 14 14
13 13 13
12 12 12
11 11 11
10 10 10
09 09 09
08 08 08
07 07 07
06 06 06
05 05 05
04 04 04
03 03 03
02 02 02
01 01 01
LEDs/Buttons
Specify CO lines by setting LED Buttons as defined by 
the table below. All LEDs with an X should be lit when 
finished.
ON = Disable Toll RestrictionSELECT = 2
Press 6FUROO to advance or 3DJH 
to go back.
After programming, press:
•
9ROs to turn all LEDs ON
•9ROt to turn all LEDs OFF 
						

							Toll Restriction
Program 45-3~6 – Special Common Carrier Numbers and Authorization Code Digit Length
Strata DK System Record Sheets 5/99119
Toll Restriction
Program 45-3~6 – Special Common Carrier Numbers 
and Authorization Code Digit Length
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:Assigns blank data to Items 3 and 5 and “00” data to Items 4 and 6. 
Program 45-8~9 – Toll Restriction Override Code
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:Leaves code assignments blank




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
SELECT =DescriptionDATA = (1 to 4 Digits)
8 (Code 1)
9 (Code 2)
DATA =
First five digits of the SPCC number, or digit length 
specified in the table below.
When editing:
• Press 
to move cursor.
• Press LED Button 01 to delete or leave a blank.
• Press LED Button 02 to allow all digits to work.
SELECT = Item 3~6
Enter the Item number 
3~6 from the table below.
DATA = Code
Enter 1 to 4-digit code from the table below.
Press LED Button 01 to delete or leave a blank.
Press LED Button 02 to allow all digits to work.SELECT = Item 8 or 9
Enter 8 to select Code 1.
Enter 9 to select Code 2. 
						

							Toll Restriction
Program *45-1 (1~4) – Toll Restriction for Office Codes
120Strata DK System Record Sheets 5/99
Program *45-1 (1~4) – Toll Restriction for Office Codes
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:Assigns 976 to first office code - blank for other three office codes
Program *45-2 (1~6) – LCR/Toll Restriction Bypass
for Special Numbers that Do Not Begin with */#
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:All data blank




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
SELECT =DATA = Office Code
1976
2
3
4




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
DATA = Office Code (3 digits)
Press LED Button 01 to delete a digit.SELECT = 1
SELECT = 1~4
SELECT = 2
SELECT = 1~6DATA = 1~5 Digit Code
(that are not subject to toll restriction)
First Digit: 0~9 only
Non-first Digits: 0~9, 

, 
When editing:
• Press LED Button 01 to delete or leave a blank.
• Press LED Button 02 to allow all digits to work.SELECT =DATA = 1~5 Digits
1
2
3
4
5
6 
						

							Toll Restriction
Program *45-3 (1~9) – LCR/Toll Restriction Bypass For Special Numbers that Begin with */#
Strata DK System Record Sheets 5/99121
Toll Restriction
Program *45-3 (1~9) – LCR/Toll Restriction Bypass For 
Special Numbers that Begin with */#
Processor Type:DK14, DK40i, All RCTUs (Release 4.15 applies to DK424 RCTUs only)
Program Type:Toll Restriction
Initialized Default:All data blank
Program *45-4 – Special Code Dialing Sequence with 
LCR
Processor Type:DK424, all RCTUs (Release 4.15 and higher)
Program Type:Toll Restriction and LCR
Initialized Default:All LEDs OFF




  6SNU
  +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG




  6SNU
  +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
Button/LEDXLED ONLED OFF
20~3Not used. Not used.
02Sends the digits from Program *45-3 before 
the Programs 55-1 Modified Digits Table 
(MDT) digits.Sends the Programs 55-1 Modified Digits Table 
(MDT) digits before the digits from Program *45-
3.
01
Inserts a pause into the dialing sequence.Does not insert a pause into the dialing 
sequence.
OPTION = 0~3
0 = No Toll Restriction after Special Code
1 = Toll Restriction after Special Code
2 = Special Code Restricted
3 = LCR + Toll Restriction after Special Code 
(R3.2)
DATA = Digit String (1~3 digits)
Do not enter 

 or.
When editing:
• Press LED Button 01 to end the digit string.
• Press LED Button 02 to allow all digits to work.
SELECT = 3
SELECT = 1~9
SELECT =DATA =OPTION =OPTION = 
1
2
3
4
5
6
7
8
9
OPTION = 0~4 (Release 4.15)
0 = Code is not valid in ISDN; is valid in analog line
1 = Privacy Change for ISDN; valid analog line
2 = Privacy Change for ISDN; not valid analog line
3 = No Privacy Change for ISDN; valid analog line
4 = No Privacy Change for ISDN; analog line not 
valid
SELECT = 4 Light the LED Buttons that are 
marked with an X in the table below. 
						

							Toll Restriction
Program 46-2~4 – Toll Restriction Allowed/Denied Area Codes by Class
122Strata DK System Record Sheets 5/99
Program 46-2~4 – Toll Restriction Allowed/Denied Area 
Codes by Class
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:Includes all area codes in all classes
lTables with deny box checked do not represent memory. All area codes in memory are allowed.
lInternational calls may be allowed/denied by entering 011 as the area code. See Program 47 for International Call Restriction by 
Country Codes.




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorToll Restriction ClassProcessorToll Restriction Class
DK14 1~4 RCTUBA/BB 1~4
DK40i 1~4 RCTUC/D 1~8
RCTUA 1~4 RCTUE/F 1~8
Class: (Check one) AllowedpDeniedp
DATA = Area Codes
Class: (Check one) Allowed
pDeniedp
DATA = Area Codes
DATA = Area Codes
Enter or display area codes.
To add a range, enter XXX

XXX (low area code 
 
high area code).
Several ranges or individual area codes may be 
entered by separating them with the # button.
SELECT = Toll Restriction Class 
(see Legend below)
Enter: 2, 3, 4#
2 = add to memory
3 = Delete from memory
4# = Display allowed codes in 
memory (press
# to scroll) 
						

							Toll Restriction
Program 46-6~8 – Toll Restriction Allowed/Denied Local Office Codes Assigned by Class
Strata DK System Record Sheets 5/99123
Toll Restriction
Program 46-6~8 – Toll Restriction Allowed/Denied 
Local Office Codes Assigned by Class
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:Includes all office codes in all classes
lTables with deny box checked do not represent memory. All office codes in memory are allowed.
lInternational calls may be allowed/denied by entering 011 as the area code. See Program 47 for International Call Restriction by 
Country Codes.




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorToll Restriction ClassProcessorToll Restriction Class
DK14 1~4 RCTUBA/BB 1~4
DK40i 1~4 RCTUC/D 1~8
RCTUA 1~4 RCTUE/F 1~8
Class:(Check one)
AllowedpDeniedp
DATA = Office Codes
Class:(Check one)
Allowed
pDeniedp
DATA = Office Codes
DATA = Office Codes
Enter or display office codes.
To add a range, enter XXX

XXX (low office code 
 
high office code).
Several ranges or individual office codes may be 
entered by separating them with the # button.
SELECT = Toll Restriction Class 
(see Legend below)
Enter: 6, 7, 8#
6 = add to memory
7 = Delete from memory
8# = Display allowed codes in 
memory (press # to scroll) 
						

							Toll Restriction
Programs 46-10~80 – Toll Restriction Class Parameters
124Strata DK System Record Sheets 5/99
Programs 46-10~80 – Toll Restriction Class 
Parameters
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:All LEDs OFF




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorToll Restriction ClassProcessorToll Restriction Class
DK14 1~4 RCTUBA/BB 1~4
DK40i 1~4 RCTUC/D 1~8
RCTUA 1~4 RCTUE/F 1~8
Class Number
Button 01 LEDButton 02 LEDButton 03 LEDButton 04 LED
ONOFFONOFFONOFFONOFF
Dial 0 
RestrictedDial 0 
AllowedDial 01 
RestrictedDial 01 
AllowedA/C+555 or 1+A/
C+555 Allowed 
for all A/Cs555 Allowed or 
Denied per A/C 
Restriction 
TA b l eRestrict 
Numbers that 
contain * or # 
within the first 
4 digitsAllow 
Numbers that 
contain * or # 
within the first 
4 digits
1
2
3
4
5
6
7
8
Turn LEDs 01, 02, 03, or 04 ON to select restriction option.Select Class from Legend below. 
						

							Toll Restriction
Programs 46-11~46-81 – Toll Restriction Class (1~8) Parameters
Strata DK System Record Sheets 5/99125
Toll Restriction
Programs 46-11~46-81 – Toll Restriction Class (1~8) 
Parameters
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:Leaves all LEDs OFF




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ProcessorToll Restriction ClassException TableProcessorToll Restriction ClassException Table
DK14 1~4 8 RCTUBA/BB 1~4 8
DK40i 1~4 8 RCTUC/D 1~8 16
RCTUA 1~4 8 RCTUE/F 1~8 16
LEDXLED ONLED OFF
20~17Not Used
16Table 16 Area/Office Exception Not Selected
15Table 15 Area/Office Exception Not Selected
14Table 14 Area/Office Exception Not Selected
13Table 13 Area/Office Exception Not Selected
12Table 12 Area/Office Exception Not Selected
11Table 11 Area/Office Exception Not Selected
10Table 10 Area/Office Exception Not Selected
9Table 09 Area/Office Exception Not Selected
8Table 08 Area/Office Exception Not Selected
7Table 07 Area/Office Exception Not Selected
6Table 06 Area/Office Exception Not Selected
5Table 05 Area/Office Exception Not Selected
4Table 04 Area/Office Exception Not Selected
3Table 03 Area/Office Exception Not Selected
2Table 02 Area/Office Exception Not Selected
1Table 01 Area/Office Exception Not Selected
Light LED Buttons as required to assign Table to Class.Select Class from Legend below. 
						

							Toll Restriction
Program 47 – Toll Restriction Exception Office Codes Assigned by Area Codes (Tables 1~16)
126Strata DK System Record Sheets 5/99
Program 47 – Toll Restriction Exception Office Codes 
Assigned by Area Codes (Tables 1~16)
Processor Type:DK14, DK40i, All RCTUs
Program Type:Toll Restriction
Initialized Default:Assigns no office codes to tables




  6SNU   +ROG 6SNU  +ROG 
6SNU +ROG 
6SNU+ROG 6SNU+ROG
ProcessorException TableProcessorException Table
DK14 01~08 RCTUBA/BB 01~08
DK40i 01~08 RCTUC/D 01~16
RCTUA 01~08 RCTUE/F 01~16
Exception Table:                        Area Code:
DATA = Record of Exception Office Codes
SELECT = Exception Table from Legend 
below.
A new exception table is needed for each 
area code with office codes that are 
exceptions to restriction.AREA CODE =
Enter only one area code per exception table.
DATA =
Enter or display office code(s).
To add a range, enter XXX

XXX (low office 
code 

 high office code).
Several ranges or individual office codes may 
be entered by separating them with the # button.
SELECT = Exception Table (01~16)
Enter: 2, 3, 4#
2 = add to the exception table
3 = Delete from the exception table
4# =Display the exception table’s office codes.