Toshiba Strata Dk14, Dk40i, Dk424 System Record Sheets Manual

							System & Station
Program 58 – DK424 Attendant Console Series (Part 1)
Strata DK System Record Sheets 5/9977
System & Station
Program 58 – DK424 Attendant Console Series (Part 1)
Processor Type:RCTUBA/BB, RCTUC/D and RCTUE/F
Program Type:Station
Initialized Default:see each program
Program 58-1 – Attendant Console Overflow Timer
Initialized Default:32 seconds
Program 58-2 – Attendant Console Display Type
Initialized Default:All LEDs OFF




  6SNU   +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
Attendant 
ConsoleButton 01 LEDButton 02 LEDButton 03 LED
ON
 (EL)OFF 
(EGA)ON (FIFO)OFF (58-4)ON 
(Call Waiting Tone)OFF 
(No Call Waiting Tone)
1
2
3
4
DATA = 011~999 seconds
DATA =SELECT = 1
LED Button 01 ON for EL or OFF for EGA display
LED Button 02 ON sets Answer Button operation for First In/
First Out (FIFO) or priority per Program 58-4
LED Button 03 ON sets Attendant Console Call Waiting ToneSELECT = 2
Console Number (1~4) 
						

							System & Station
Program 58 – DK424 Attendant Console Series (Part 1)
78Strata DK System Record Sheets 5/99
Program 58-4 – Attendant Console Answer Button Priority Assignments
Initialized Default:0, 1, 2, 3, 4, 5, 6
Program 58-5 – Attendant Console Overflow Destination Assignments
Initialized Default:  Blank




  6SNU   +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG




  6SNU   +ROG  6SNU  +ROG 6SNU+ROG 6SNU+ROG
Processor[PDN] Port RangeMax. Consoles
RCTUBA/BB 000~079 2
RCTUC/D 000~239 4
RCTUE/F 000~335 4
Lowest PriorityHighest Priority
Enter button numbers in priority order.SELECT = 4
Console Number (1~4)
Button NamePark-RCTra ns RCHold-RCIn-TransLINEIn Dial “O”[PDN]
Button Number0123456
Enter the overflow destination port number.SELECT = 5
Console Number (1~4)
Console overflow destination = 
						

							System & Station
Program 59 – Attendant Console Flexible Button Codes
Strata DK System Record Sheets 5/9979
System & Station
Program 59 – Attendant Console Flexible Button 
Codes
Processor Type:RCTUBA/BB, RCTUC/D, RCTUE/F
Program Type:Station
Initialized Default:Given throughout this section




  6SNU   +ROG+ROG 6SNU+ROG 6SNU+ROG
Codes (Left Buttons 1~12) Codes (Right Buttons 1~12)
Split (295) Join Loop (239) Sup. Loop (296) Conf (297) Overflow (299) Night (439)
In-Emrg (261) In-DN (257)In-Dial “0” (262) Redial (496) Spdial (497) SD13 (*13)
In-Trans (258) Trans-RC (260) Hold-RC (259) BLF (298) Out Dial (294) SD12 (*12)
In-LG3 (243) In-LG2 (242) In-LG1 (241) Attd Call (000) SD10 (*10) SD11 (*11)
Console 1
LeftRight
10 11 12 10 11 12
07 08 09 07 08 09
04 05 06 04 05 06
01 02 03 01 02 03
Console 2
LeftRight
10 11 12 10 11 12
07 08 09 07 08 09
04 05 06 04 05 06
01 02 03 01 02 03
Console 3
LeftRight
10 11 12 10 11 12
07 08 09 07 08 09
04 05 06 04 05 06
01 02 03 01 02 03
Console 4
LeftRight
10 11 12 10 11 12
07 08 09 07 08 09
04 05 06 04 05 06
01 02 03 01 02 03
DATA = Button Code
See legend.
Press LED Buttons 01~12 on Programming Telephone 
to enter data for corresponding console button.Attendant Console (1~4)
1 = Left
2 = Right 
						

							System & Station
Program 59 – Attendant Console Flexible Button Codes
80Strata DK System Record Sheets 5/99
Table 2 Required PC Attendant Console Button Codes
Button FunctionButton LabelsCodeNotes
Conference Conf 297 Starts conference calls.
Hold Recall Hold-RC 259 Held calls recall on this button.
Incoming Dial “0” In-Dial “0” 262 Dial “0” calls ring in on this button.
Incoming Directory Number In-DN 257Incoming calls to the console DN ring on this 
button. The console [DN] is the Prog 04 
assignment of the Prog 04 console port 
number.
Incoming Ring Transfer In-Trans 258 Receive call transfer.
Join-Loop Join-Loop 293 Connects any held call to an existing call.
Out Dial Out Dial 294Switches ATTD consoles dial pad from digital 
to tone mode.
Redial Last Number 
(
 Button)Redial or RDL 496 Redials the last number.
Release to Idle Release Call or RLS 476 Releases current call and makes station idle.
Speed Dial Select (

Button) Speed Dial or SDS 497 Begins speed dial selection.
Split Call Split 295Allows attendant to talk to either party 
separately on a conference call.
Supervised Loop Sup Loop 296Places call on attendant hold loop key so 
attendant can supervise call.
Transfer Recall Trans-RC 260No answer transferred calls, recall on this 
button.
Attendant Call Attd Call 000Can originate calls on this button. The 
Attendant Call LED is lit red any time the 
attendant talk path is connected. 
Table 3 Recommended PC Attendant Console Button Codes
Button FunctionButton LabelsCodeNotes
Display BLF BLF 298 Displays BLF on CRT or EL display.
Incoming Emergency In-Emrg 261Indicates to all consoles an incoming 
emergency call.
Message Waiting/Flash Msg Wait, Flash or MW/FL 499Indicates a message from station or VM 
device to Attendant. Disconnects and recalls 
dial tone on CO line; accesses Centrex or 
PBX features; enters pause or flash during 
speed dial programming.
Overflow Overflow 299 Places console in the call overflow mode.
Park Recall Park-RC 263 Parked calls recall on this button. 
						

							System & Station
Program 59 – Attendant Console Flexible Button Codes
Strata DK System Record Sheets 5/9981
System & Station
Table 4 Incoming Line Group Button Assignments
In-LG1~241 In-LG5~245 In-LG9~249 In-LG13~253
In-LG2~242 In-LG6~246 In-LG10~250 In-LG14~254
In-LG3~243 In-LG7~247 In-LG11~251 In-LG15~255
In-LG4~244 In-LG8~248 In-LG12~252 In-LG16~256
Table 5 Optional Attendant Console Button Codes
Button FunctionButton LabelsCodeNotes
Alarm Alarm Reset or ALRM 477 Resets alarm condition system-wide.
Call Pickup Tenant 1~Call 
Pickup Tenant 4PKUP 1~PKUP 4 435~438 Picks up tenant 3s ringing CO calls.
CO Line Appearance CO line access of appearing calls. CO 
line ranges vary according to processor:
Line 1~48 001~048 RCTUBA/BB
Line 1~144 001~144 RCTUC/D
Line 1~200 001~200 RCTUE/F
Door Lock 0~Door Lock 4 
(DDCB/HDCB)DRLK 0~4 471~475 Momentarily unlocks door (3 or 6 
seconds). The PC attendant activates 
these options when these buttons are 
assigned.
Emergency Page Access Emrg Page 292 Activates ALL CALL Paging to 
telephone speakers (not EXTR Page). 
Overrides any existing ALL CALL page.
Night Transfer 
Tenant 1~Tenant 4Night Transfer1 or NT1~Night 
Transfer4 or NT4439~442 Sets Tenant 1 CO line DAY/NIGHT ring 
mode.
Privacy Privacy On Line or PRIV 453 Prevents Privacy Override (not 
Executive Override).
Privacy Release Privacy Release or PRV RLS 479 Changes station Privacy mode to Non-
private for CO lines.
Pause Spd Dial Pause or PAU 495 Sets pause in Speed dial (see Program 
12-3.)
Pause (Long) Spd Dial Lng Pause or PAU/L 493 Sets a 10-second pause in Speed Dial.
Unanswered Caller ID and/
or ANI Stored Number 
Auto DialLost Call Auto Dial or LCAD 462 Will Auto Dial a Caller ID and/or 
Automatic Number Identification (ANI) 
telephone number that was stored in 
station Caller ID/ANI memory.  
						

							System & Station
Program 59 – Attendant Console Flexible Button Codes
82Strata DK System Record Sheets 5/99
Table 6 Additional Feature Button Codes 
Button FunctionButton LabelsCodeNotes
Account Code Account Code or ACCNT 450 Allows a Voluntary Account Code to be 
entered.
Alert Signaling Alert 1~4 427~430 Console can alert another station but 
another station cannot alert the console. 
See Program 39 for more information.
All Call Voice Page All Call Page or AC 489 Pages up to 120 idle electronic or digital 
telephones over speaker.
Automatic Busy Redial Auto Busy Redial or ABR 470 Sets ABR of busy outgoing number.
Automatic Callback Busy Auto Callback or ACB 494 Sets ACB for station recalled by busy 
line.
Call Forward All Calls Call Frwd All Calls or CFAC 487 All calls forward to selected station.
Call Forward A.C. Fixed Call Frwd to: or CFF 486 Forwards all calls to pre-defined 
destination. See Program 36.
Call Forward Busy Call Frwd Busy or CFB 459 Forwards calls to selected station if 
station is busy.
Call Forward Busy/
No AnswerCall Frwd Busy/NAns or CFB/NA 457 Forwards calls to selected station if 
station is busy or does not answer.
Call Forward External Call Frwd External or CF-EXT 460 Forward calls externally.
Call Forward No Answer Call Frwd No Answer or CFNA 458 Forwards calls to selected station if 
station does not answer.
Call Park Park in Orbit or PARK 464 Call Park Only.
Call Park LCD Display Park Orbit DIsplay or CPD 465 CP Display Button and Mode 64 can be 
used interchangeably. Displays call 
parked via telephone LCD.
Call Park and Page Call Park/Page or CP/PG 463 Parking and Paging Park Pickup. 
Call Pickup (Directed) Directed Pickup or PKUP 484 Picks up ringing or held intercom, trunk 
calls, and page.
Call Pickup (Group)4 Group Pickup 480 Picks up a call to any group to which 
station is assigned in *31.
Do Not Disturb Do Not Disturb or DND 498 Prevents calls to station.
ISDN Sub-address Sub-address 467Separates the called party’s ISDN sub-
address from the called party number. 
The 
 digit performs this function on 
standard telephones.
ISDN Start Start 469 Initiates DK to send dialed digits to the 
ISDN network when this button is 
pressed from a digital or electronic 
telephone. Program *63-2 invokes the 
same function when the Dial Timer 
expires. Also see Tone Button in this 
table.
LCD Message Select LCD Msg Select or LCD M 481 Begins LCD message selection. 
						

							System & Station
Program 59 – Attendant Console Flexible Button Codes
Strata DK System Record Sheets 5/9983
System & Station
Night Transfer Lock 
Tenant 1~Night Transfer 
Lock Tenant 4Night Lock1 or NT1 L1~Night 
Lock4 or NT4 L4431~434 Used to lock system ringing mode: DAY, 
DAY2, NIGHT See Programs 74 and *36 
for NT Lock Password assignments.
Release and Answer Release and Ans and RLS/ANS 466 Simulates On-hook/Off-hook operation 
to release an existing call and answer 
new incoming/ringing call.
Save Last Dialed Number Save Last Number or SAVE 485 Saves last number dialed for future 
speed dial.
Station Speed Dial Codes SD Reserves button for station speed dial 
for the following processors:
*10~*49 RCTUBA/BB
*10~*49 RCTUC/D
*100~*139 RCTUE/F
System Speed Dial Codes SD Speed dial number is set by station port 
000. 
*600~*699 RCTUBA/BB
*600~*699 RCTUC/D
*200~*999 RCTUE/F
Tone Tone Dial Select or TONE 490 CO dial signals set to tone or pulse.
For ISDN applications, after the user 
presses the Tone Dial Select button, any 
digits dialed after it is will be sent using 
DTMF tones.
Table 6 Additional Feature Button Codes (continued)
Button FunctionButton LabelsCodeNotes 
						

							System & Station
Program 60-1 – SMDR Data Output Options
84Strata DK System Record Sheets 5/99
Program 60-1 – SMDR Data Output Options
Processor Type:DK14, DK40i, All RCTUs
Program Type:System
Initialized Default:LED 01 OFF




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
LED/ButtonXLED ONLED OFF
20
19
18
17
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
Caller ID, ANI and DNIS data will be sent from the system 
SMDR portAccount code data will be sent from the system SMDR 
port
Light the LED Buttons that are marked 
with an X in the table below.SELECT = 1 
						

							System & Station
Program 60-2~7 – SMDR Output/Account Code Digit Length
Strata DK System Record Sheets 5/9985
System & Station
Program 60-2~7 – SMDR Output/Account Code Digit 
Length
Processor Type:DK14, DK40i, All RCTUs
Program Type:System
Initialized Default:Item 2: 10 seconds
Item 3: SMDR output is enabled for answered incoming/outgoing calls 
Item 4: a 6-digit length is assigned to all Forced/Voluntary Account Codes
Item 7: 21 digits




  6SNU   +ROG  6SNU +ROG 6SNU+ROG 6SNU+ROG
ItemDescriptionData
2
SMDR Threshold Time
0 =1 second
1 = 10 secondsTime
3
SMDR Output when a call is completed
0 = Outgoing Only
1 = Incoming and OutgoingSMDR COR
4
Forced/Voluntary Account Code Digit Length 04~15
(See Program 69 for Verified Account Codes)
Digits are verified per Program 30, Button/LED 14 and Program 69Account
5
SMDR Printout Options
Toll Dial:
0 = All Calls (item 3, printout outgoing call only is still available)
1 = Dial “0” calls only
2 = Dial “1” calls only
3 = Dial “00” calls only
4 = Dial “1”, “0” calls only
5 = Dial “1”, “00” calls onlyToll Dial Data
6
DISA Security Code
01~15 digits, may be changed from station, per Program 30
If a security code is not programmed, outgoing trunk access via DISA 
will not require a security code when dialing.Data
Button 01 = blank
Button 02 is wild card 
(any digit from 1~9)
7
Credit Card Call Digit Length, 01~30 digits
(see Program 43)Credit
Number of digits required when “0” is the 
first digit dialed; if this number of digits is 
not dialed, the system will disconnect the 
call after 20 seconds. “0” is counted as a 
digit. Example: 0 + 714 + 583 - 3700 = 11 
digits; 11 should be programmed as a 
minimum in this case.
See table below.SELECT = 2~7 (Item)
Make a selection from 
the table below. 
						

							System & Station
Program 60-8 – Call Forward External (Remote Change, Security) ID Code
86Strata DK System Record Sheets 5/99
Program 60-8 – Call Forward External (Remote 
Change, Security) ID Code
Processor Type:DK14, DK40i, All RCTUs
Program Type:System
Initialized Default:No digits




  6SNU   +ROG  6SNU  ‡‡‡ +ROG 6SNU+ROG 6SNU+ROG
Processor[PDN] Port RangeProcessor[PDN] Port Range
DK14 000~009 RCTUBA/BB 000~079
DK40i 000~027 RCTUC/D 000~239
RCTUA 000~031 RCTUE/F 000~335
Telephone Port 
NumberCF/EKT ID Code 
(1~15 digits)Telephone Port 
NumberCF/EKT ID Code 
(1~15 digits)Telephone Port 
NumberCF/EKT ID Code 
(1~15 digits)
More Codes
DATA = ID code (1~15 digits)
When entering less than 15 digits, enter digits, 
then press Hold.
LED Button 01 = blanks, erases data
LED Button 02 = a wild card (can be any digit 
from 1~9
)
SELECT = 8
Telephone port number to 
which the CF Ext ID 
(security) code will be 
assigned.