Sony Ke P42xs1 Operating Instructions

							31
GB
The Memory Stick Home Menu
This screen gives an overview of the “Memory 
Stick” content. From this menu you can view 
photos and movies recorded on the “Memory 
Stick” and change settings related to the viewing 
operation. 
To do this:
Once you have inserted a Memory Stick, press the 
 button on the remote control (anytime you want 
to remove the menu, press the   button again). 
Next, read below how to operate into each option.
ADJUSTING SETTINGS
  SLIDE SHOW
This option allows you to display all the “Memory Stick” pictures as a slideshow presentation on 
the TV screen.
To  d o  t h i s :
Whilst the “  Memory Stick Home” menu is displayed, press 
v or V to select   Slide Show. 
Next press the OK button Finally press v or V button to select:
StartTo start the slideshow presentation, select this option and press OK
Advan.To set the length of time a picture is displayed during a slideshow, select this
Slds.option and press OK. Next, press 
v or V to select:
AutoSelect this option and press OK if you want the slideshow to run 
automatically. 
ManualSelect this option and press OK if you want the slideshow to run 
manually. In that case, 
b or B buttons should be pressed to show the 
next or previous picture.
Interval To select the interval between each picture (when “Advan. Slds.” is set to “Auto”), 
select this option and press OK. Next press 
v or V to select between 5 sec, 10 sec, 
30 sec, 1 min or 5 min.
 CloseSelect this option and press OK to back to the previous menu.
Memory Stick
continued...
Slide Show
Option
Select FolderMemory Stick Home
1 min. remain
Select: Set:OK
No.: 3/16
Size: 510 x 480File: ARIADNA.JPG
Date: 27.NOV.2002  11:97
8903241
8903241
Highlighted 
thumbnail Folder name for 
the selected 
folder
Remaining 
recording 
timeInformation about 
the selected image 
or movieIndicates that the thumbnail 
is Protected (for details see 
page 33).
Indicates the thumbnail 
is a movie (MPEG 1) 
instead of a photo 
(JPEG)
 
						

							32
 OPTION
This option allows you to sort the pictures within a folder, to filter the images to be shown, to delete all the pictures 
stored well as display information about the “Memory Stick” information.
To  d o  t h i s :
While the “  Memory Stick Home” menu is displayed, press 
v or V button to select   Option. Next, press the 
OK button Finally, press 
v or V button to select:
 FileSelect this option and press OK. Next, press 
v or V to select:
 The “Sort” and “Filter” options are only available when the “   Digi-Camera Mode” 
option is set to “Off” For details on “   Digi-Camera Mode”, see below.
SortSelect this option and press OK. Next press 
v or V to sort the image file 
alphabetically or by date.
FilterSelect this option and press OK. Next press 
v or V to select Still (to show 
only the still images stored in the  “Memory Stick”), Movie (to show only the 
moving images stored in the “Memory Stick”) or Off (to show all the images 
(still and moving) stored in the “Memory Stick”).
  Select this option and press OK to display information such as used space, available space and 
total capacity for the “Memory Stick”.
 CloseSelect this option and press OK to go back to the previous menu.
SELECT FOLDER
This option allows you to select a specific folder on the “Memory Stick”.
To  d o  t h i s :
While the “  Memory Stick Home” menu is displayed, press 
v or V button to select Select Folder. Next, press 
the OK button Finally press 
v or V button to select:
 Digi. Camera Select this option and press OK. Press 
v or V to select On to automatically show all the
Mode  pictures taken by a digital camera or select Off to display all the folders contained on the  
“Memory Stick”. Finally, press OK to confirm your selection.
/Select this option and press 
b to display the list of folders. Next, press v or V to select the 
folder you want to view and press OK.
O     Select this option and press OK to go to the upper folder stage. 
 CloseSelect this option and press OK to go back to the previous menu.
Memory Stick
continued...
 
						

							33
GB
VIEWING PHOTOS AND PLAYING MOVIES
To  d o  t h i s :
1While the “  Memory Stick Home” menu is displayed, press b to enter to the thumbnail pictures. Then press 
B, b, v or V to highlight the required thumbnail.
2With the required thumbnail highlighted, press OK to display the selected thumbnail together with all available 
options. Press 
v or V to select: 
Full ScreenThis option appears only if the selected thumbnail is a photo. Select this option and press
(for photos)OK to view the selected photo fully in the TV screen. 
 The TV automatically displays the appropriate image size for each image on the full 
screen.
 The quality of the photo when viewed at full screen depends on the resolution of the 
JPG file.
While viewing a photo fully on the TV screen you can:
 
1 Press b or B to display the next or previous file.
 
2 Press OK to access the following additional options:
 Return  Select this option and press OK to return to the “  Memory Stick 
Home” menu.
InformationSelect this option and press OK. Next, press 
v or V to select On to 
display all information about the selected file or Off to remove the 
information from the screen. Finally, press Close to store.
 ProtectSelect this option and press OK. Next, press 
v or V to select On to 
protect the selected thumbnail file from any changes or Off to 
unprotect the file. Press Close to store. 
All the protected files are indicated with the mark  .
 RotateThis option is only available for unprotected still images (photos). 
Select this option and press OK. Next, press 
v or V to select   to 
rotate clockwise or select   to rotate anticlockwise. Next, press 
repeatedly OK to rotate the photo (whenever you press OK, the 
image rotates 90 degrees). Finally, select Close to store.
DeleteThis option is only available for unprotected files. Select this option 
and press OK if you want to delete the selected file. A message asks 
you to confirm deletion. Press 
b or B to select Ye s and press OK to 
confirm.
 Close Select this option and press OK to go back to the previous menu.
Memory Stick
continued...
 
						

							34
Movie PlayerThis option appears only if the selected thumbnail is a movie (marked with the   symbol).
(for movies) Select this option and press OK to operate the movie player. Next press 
B, b, v or V to 
select:
 ReturnSelect this option and press OK to return to the “  Memory Stick Home” 
menu.
 Select this button and press OK to playback the movie. During playing, 
select this button again and press OK to pause the movie.
While the movie is in playback mode, press and hold the 
B button on the 
remote control to rewinds the movie. Normal playback continues when you 
release the button.
 While the movie is in playback mode, press and hold the 
b button on the 
remote control to fast forward the movie. Normal playback continues when 
you release the button.
If you press 
B or b buttons before the movie is in playback
  mode, the next or previous photo or movie will be displayed.
 Select this button and press OK to stop the movie.
Full ScreenSelect this option and press OK to automatically playback the movie at full 
screen size.
 To display the movie player controls again, press 
B, b, v or V or
   OK.
 The TV automatically displays the appropriate image size for each 
movie on the full screen.
 The quality of the movie, when is viewed at full screen, depends on 
the resolution of the MPEG 1 file.
MenuSelect this option and press OK. A new menu is displayed. Next press 
v or 
V to select:
InformationSelect this option and press OK. Next press 
v or V to 
select On (displays all information for the selected file) or 
Off (removes the information from the screen).
 ProtectSelect this option and press OK. Next press 
v or V to 
select On to protect the selected thumbnail file from any 
changes or Off to unprotect the file. Press Close to store.
 All the protected files are indicated with the mark
  .
DeleteThis option is only available for unprotected files. Select 
this option and press OK if you want to delete the selected 
file. A message asks you to confirm deletion. Press 
B or b to select Ye s and press OK to confirm.
 Close Select this option and press OK to go back to the previous 
menu.
 Slide ShowSelect this option and press OK to automatically displays all the photos and movies from the 
selected folder in a slideshow presentation mode.
Memory Stick
continued...
 
						

							35
GB
 ProtectSelect this option and press OK. Next press v or V to select On to protect the selected 
thumbnail file from any changes or Off to unprotect the file. Next press 
v or V to select Close 
to store.
All the protected files are indicated with the symbol  .
 RotateThis option is only available for unprotected still images (photos). Select this option and press 
OK. Next press 
v or V to select  to rotate clockwise or  to rotate anticlockwise. Next, 
press repeatedly OK to rotate the photo (whenever you press OK, the image rotates 90 
degrees). Finally select Close to store.
DeleteThis option is only available for unprotected thumbnails files. Select this option and press OK if 
you want to delete the selected movie or photo. A message asks you to confirm deletion. Press 
B or b to select Ye s and press OK to confirm.
 CloseSelect this option and press OK to back to the previous menu.
Memory Stick
 
						

							36
Teletext
Teletext is an information service transmitted by most TV stations. The index page of the teletext service 
(usually page 100) gives you information on how to use the service. To operate teletext, use the remote control 
buttons as indicated below.
Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal.
To switch on Teletext : 
1Select the broadcast channel which carries the teletext 
service you wish to view.
2Press the    button once to enter Picture And Text 
(PAT) mode. The screen is divided into two with the 
Text display on the left and the TV channel in the 
botton right corner.
   While viewing PAT, you can zoom the picture 
screen by pressing 
v or V buttons. Once the 
two screens are overlapped, they can be swapped 
by pressing the OK button.
3If you wish to view the Text in full screen mode, press 
the   button a second time.
To select a Teletext page:
Input 3 digits for the page number, using the numbered buttons.
  If you make a mistake, retype the correct page number.
  If the counter on the screen continues searching, it is because the page 
is not available. If this is the case, input another page number.
To access the next or preceding page:
Press PROG + ( ) or PROG - ( ) .
To freeze a teletext page:
Press  / . Press it again to cancel the freeze. 
To select a sub page: 
A teletext page may consist of several sub pages. In this case, one or more arrows appear  next 
to the page number. Press 
B or b to display an information line at the bottom of the screen 
showing the number of sub pages contained on this page. As soon as sub pages are available, they 
start to automatically run. If you want to stop the show and select your desired sub page, press 
repeatedly 
B or b. 
To Switch Off Teletext: 
Press .
Fastext
Fastext service lets you access Teletext pages with one button push.
When you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at  
the bottom of the teletext page. Press the appropriate coloured button (red, green, yellow  
or blue) to access the page corresponding to your menu choice.
Teletext
13
46
79
 
						

							37
GB
NexTView*
*(depending on availability of service).
NexTView is an on-screen electronic programme guide, providing you with programme information for 
different broadcasters.
When looking for information you can search by theme (sports, art, etc...) or date.
If wrong characters appear when viewing NexTView, use the menu system to enter the “Language” menu (see 
page 26) and select the same language as the NexTView is broadcasted.
Displaying NexTView  
1Select a broadcast channel providing a NexTView service. In this case the indication 
“NexTView” is displayed as soon as data is available.
2To see NexTView service you have two different types of NexTView interface. These depend 
on the % of available data:
a) “Programme List” interface:
Whilst you are watching TV, and after the indication “NexTView” (coloured orange) is 
displayed on the screen, press the   button on the remote control to watch the 
“Programme List” interface (see fig. 1).
b) “Overview” interface:
Whilst you are watching TV, and after more than 50% of NexTView data is available 
(100% data may not be available depending on the area)  the indication “NexTView” 
(coloured black) is displayed on the screen. Press the   button on the remote control 
to watch the “Overview” interface (see fig. 2).
3  To navigate through NexTView:
 Press 
B or b to move left or right. 
Press 
v or V to move downwards or upwards. 
 Press OK to confirm a selection. 
 If you have selected a programme, press OK to get more information on the 
selected programme. 
4To switch NexTView off, press the   button on the remote control.
                    “Programme List” interface (fig. 1):                               “Overview” interface (fig. 2):
 1 Programmme list         2                                                       3 
Icons’ key:
 
NexTView
General
Praesentiert vonIhrer Programmzeitschrwww.tvmovie.deThu 12 Jun
14:36Thu 12
AttrText
AttrText
AttrText
AttrText
AttrText
AttrText
Krimiserie - Der Fall mit dem mittelmassPerry Mason
RTL2
14:3015:00
15:30 16:00
Tue 17 Jun 14:55 - 16:30
Auf schlimmer undewig
Baywatch
Benny Hill
The Osbournes
Segeln: Louis Vuitton Cup
Twilight Zone
categories
Perry Mason
DateSelect:
1
2
3
General
Praesentiert vonIhrer Programmzeitschrwww.tvmovie.deThu 12 Jun
14:36Thu 12
AttrText
AttrText
AttrText
AttrText
AttrText
AttrText
Krimiserie - Der Fall mit dem mittelmassPerry Mason
RTL2
14:3015:00
15:3016:00
AttrText16
AttrText16
AttrText16
AttrText16
AttrText16
AttrText16
Tue 17 Jun 14:55 - 16:30
CategoriesDateSelect:
1
23
 General: 
All the programme information is listed by time 
and broadcast channels order.
 News
 Movie
 Sports Show
 Children
   Arts
Music
Date:
Press the red button of the remote 
control to display the date screen, 
you can select the desired date by 
pressing v or V. Next press OK to 
confirm.Categories:
Press the blue button of the remote to 
display the icons (see below the Icon’s key) 
for different themes. Next press v or V to 
select the desired icon and finally press the 
OK button to confirm.
 
						

							38
* “PlayStation” is 
a product of Sony 
Computer 
Entertainment, 
Inc.
* “PlayStation” is 
a trademark of 
Sony Computer 
Entertainment, 
Inc.
Connecting Equipment to the TV
 Using the following instructions you can connect a wide range of optional equipment to  your TV set. 
 Connecting cables are not supplied.
Connecting a VCR
To connect a VCR, please refer to the section “Connecting the aerial and VCR” of this instruction manual on page 14. 
Connecting a VCR or a DVD recorder that supports SmartLink
SmartLink is a direct link between the TV set and a SmartLink compatible VCR/DVD recorder. For more 
information on SmartLink, please refer to the instruction manual of your SmartLink VCR/DVD recorder.
If you use a VCR or a DVD recorder that supports SmartLink, please connect the VCR or the DVD recorder to the 
TV using a Scart lead to the Scart  2/  J or  3/  K.
Both Scart connectors  2/  J and  3/  K cannot support SmartLink at the same time. If you 
connect a VCR or a DVD recorder to both Scart connectors, select which Scart supports SmartLink through 
the “SmartLink” option in the “Features” menu. For details see page 23.
If you have connected a decoder or a Set Top Box to the Scart  3/  K or through a 
VCR connected to this Scart
Select the “Manual Programme Preset” option in the “Set Up” menu and after entering in the “Decoder**” option, 
select “On” (refer to page 29). Repeat this option for each scrambled signal.
**This option is only available depending on the country you have selected in the “Country” menu.
(MONO)
L/G/S/I
R/D/D/D
To avoid snowy picture, do not 
connect external equipment to 
connectors A and B at the 
same time.
8mm/Hi8/
DVC
camcorderS VHS/Hi8/
DVC
camcorder
A
B
C
K
DVD
J
Hi-fiDVD recorder with 
component signal formatI
DGH
E
Compact AV
System/Amplifier
VCR
Decoder
PlayStation2
“PlayStation”*
Sub woofer
F
S
S
S
Additional Information
continued...
 
						

							39
GB
Connecting a DVD or DVD recorder
Connect the DVD or the DVD recorder to the Scart connector 2/  J.
Connecting a DVD recorder with 576p signal format
Some DVD recorder may have 576p signal format. In this case, connect the DVD recorder to the Scart connector 
2/  J, to the audio input jacks  4 G and to the video component jacks Y, PB/CB, PR/CR   4 H.
Using this connection, the TV will record from the  AV 2 input ( Scart connector 
2/  J).
To watch the input signal, you can chose from AV 2 (Scart connector 
2/  J) or AV 4 (audio input jacks 
 4 G and video component jacks   4 H). To watch the best picture we recommend you select AV 4.
Connecting Audio Equipment to the TV
To listen to the sound from TV on Hi-fi equipment.
Connect your audio equipment to the audio output sockets E if you wish to amplify the audio output from the TV. 
Next, using the menu system, select the “Sound Adjustment” menu and set the “TV Speakers” to Off (see page 21).
 To control the external speakers using this remote control, set “Audio Output” option to “Variable” in
  the “Sound Adjustment” menu (see page 21).
 The volume of the external speakers can be altered by pressing the volume buttons on the TV remote control.
   The treble and bass setting can also be altered through the “Sound Adjustment” menu (see page 20).
For a sub wooferConnect your sub woofer to the 5 W/G/W/G output jack D using a monaural audio cable.
To enjoy “Dolby Virtual” sound effect through your
audio equipment
Place the speakers of your equipment in front of your listening position and 
beside the TV set.
Then by using the menu system, select the menu “Sound Adjustment”. Next 
set the option Audio Output to Variable and the option Sound Effect to 
Dolby Virtual (see pages 20 and 21). 
To control the volume level of an external amplifier
When you connect the AV mouse and install it in an external amplifier, you can use the external amplifier’s remote 
control toward the TV for controlling the volume level of the external amplifier. Connect the AV mouse to the AV 
MOUSE IN jack F, and install it right above the external amplifier’s remote control sensor.
AV mouse
(supplied)
Amplifier
Remote control sensor
Additional Information
continued...
Your sitting position
~50°
Hi-Fi speakers
 
						

							40
Viewing pictures from equipment connected to the TV
1Connect your equipment to the designated TV socket, as indicated on page 38.
2Switch on the connected equipment.
3To watch the picture from the connected equipment, press the   button repeatedly until the 
correct input symbol appears on the screen.
Symbol    Input Signals
 1 Audio / video input signal through the Scart connector I
 1 RGB input signal through the Scart connector I. This symbol appears only if 
an RGB source has been connected. 
2 Audio / video input signal through the Scart connector J. 
2 RGB input signal through the Scart connector J. This symbol appears only if 
an RGB source has been connected. 
3 Audio/video input signal through the Scart connector K. 
3 S Video Input signal through the Scart connector K. This symbol appears only 
if an S Video source has been connected. 
 4 Component input signal through the Y, P
B/CB, PR/CR jacks H and audio input 
signal through G. 
5 Video input signal through the phono socket B and Audio input signal through 
C. 
5 S Video Input signal through the side S Video input jack A and Audio signal 
through C. This symbol appears only if an S Video source has been connected.
4  Press the   button on the remote control to return to the normal TV picture. 
For Mono Equipment
Connect the phono plug to the L/G/S/I  socket on the side of the TV and select  5 or  5 
input signal using the instructions above. Next, refer to the “Sound Adjustment” section of this 
manual and set “Dual Sound” option to “A” on the sound menu screen (see page 20).
S
S
S
Additional Information