Samsung UE 46C6500 User Manual

							31English
04Advanced	Featu\besSWL(Samsung	Wi\beless	Link)
This \function lets \yyou connect a Samsu\yng device that 
supports the PBC (WPS) to your TV\b You can connect 
devices to the TV e\yven i\f a sharer is not connecte\yd to the TV\b
 
✎To use the Internet@T V, the AP (access point) must be 
connected to the wireless network\b
 
✎I\f a Samsung Wireless L AN Adapter is connected to the 
USB	2 port, the network may not operate normally\b We 
recommend to connecting it to the USB	1	(HDD) port\b
 
✎Only sharers using the 2\b4 Ghz band are supported\b 
Sharers using the 5 Ghz band are not supported\b
SWL	connect
You can directly connect a dev\yice that supports \ythe PBC 
(WPS) to the TV\b
 
✎This \function is available when SWL(Samsung	
Wi\beless	Link) is set to On \b
How	to	connect	Samsung	Wi\beless	Link
For the procedures to establish a \yconnection, re\fer to the 
\following:
1.	 Follow Steps 1 through 5 in the “How\y to set up using 
PBC (WPS)” (p\b 28)\b
2.	 Select SWL(Samsung	Wi\beless	Link) by using the ▼ 
button and press the ENTER
E button to turn it On\b
3.	 Select SWL	connect by using the ▼ button and press 
the ENTER
E button\b
4.	 I\f the “P\bess	the	PBC	button	on	the	device	which	
suppo\bts	PBC	button	to	connect	within	120	
seconds” message appears,\y press the PBC button\y on 
the device to conne\yct\b
 
✎For more in\formation, re\fer to the wireless network 
setup manual o\f the device to be connected\b 
5.	 I\f the device is co\ynnected properly to the TV a\f\yter 
starting count on \ymessage box then m\yessage box will 
be disappeared automatically\b
 
✎I\f the connection \fails, please retry a\fter 2 minutes\b
If	You\b	TV	Fails	to	Connect	to	the	Inte\bnet
Your TV may not be a\yble to connect to \ythe Internet 
because your ISP ha\ys permanently registered the 
MAC address (a unique ident\yi\fying number) o\f yo\yur 
PC or modem, which \yit then authentica\ytes each time 
you connect to the \yInternet as a way o\f preventing 
unauthorized access\y\b As your TV has a \ydi\f\ferent MAC 
address, your ISP can n\yot authenticate it\ys MAC address, 
and your TV can not\y connect\b
To resolve this problem, ask your ISP\y about the 
procedures required to connect devic\yes other than a PC\y 
(such as your TV) t\yo the Internet\b
I\f your Internet service provider requires an ID or passwo\yrd 
to connect to the \yInternet, your TV may no\yt be able to 
connect to the Int\yernet\b I\f this is the\y case, you must ent\yer 
your ID or password when connecting t\yo the Internet\b
The internet connection may \y\fail because o\f a fi\yrewall 
problem\b I\f this is t\yhe case, contact yo\yur Internet service 
provider\b 
I\f you cannot conne\yct to the Internet even a\fter you \yhave 
\followed the procedures o\f your Internet service provider, 
please contact Samsung Electronics at 1-800-SAMSUNG\b
[UC6500_XH]BN68-02694B-00L05-1.indb   312010-02-27   오후 12:20:08Downloaded From TV-Manual.com ManualL 
						

							32 English 
 Ad\fanced Features 
  Me\bia Play  
	
¦ 		Connecting	a	USB	De\dvice		
		1.	 Turn on your TV\b 
	2.	 Connect a USB devic\ye containing photo\y, music and/or movi\ye fi les to the   USB	1	
(HDD)  or   USB	2  jack on the side o\y\f the TV\b 
	3.	 When USB is connect\yed to the TV, popup window appe\yars\b Then you can s\yelect 
  Media	Play \b  
	
¦ 		Connecting	to	the	P\dC	th\bough	netwo\bk		
  You can play pictures, music and video\ys saved on your PC \ythrough a network con\ynection in the   Media	Play  mode\b   
 
✎  I\f you use   Media	Play  through saved \file on your PC, you should download “PC Share Manager” and users manual \from 
“www\bsamsung\bcom\b”  
		1.	 For more in\formation on ho\yw to confi gure your network, re\fer to “Network Co\ynnection\b” (p\b 25)\b \y 
 
–   You are recommended to locat\ye both TV and PC in\y same subnet\b The fi\y rst 3 parts o\f the \ysubnet address o\f the TV and 
the PC IP addresses should be the\y same and only the \ylast part (the hos\yt address) should be chan\yged\b (e\bg\b IP Address: 
123\b456\b789\b**)  
		2.	 Using a LAN cable,\y connect between t\yhe external modem and the P\yC onto which the Sa\ymsung PC Share Manager 
programme will be in\ystalled\b  
 
–   You can connect the\y TV to the PC directly without conne\ycting it through a Sharer (Router)\b  
 Enjoy photos, music \yand/or movie fi les saved on 
a USB Mass Storage \yClass (MSC) device \yand/or 
your PC\b 
 LAN Cable 
 PC 
 External Modem 
(ADSL/VDSL/Cable TV\y) 
 LAN 
 Samsung 
Wireless LAN  Adapter 
 Wireless IP Sharer 
 TV Rear Panel 
 or 
MEDIA.P
 USB Drive 
 TV Rear Panel 
(HDD)
 or 
SUM   Change Device     View Devices      E   Enter      R   Return  
  MediaPlay  
  Videos  
[UC6500_XH]BN68-02694B-00L05-1.indb   322010-02-27   오후 12:20:09Downloaded From TV-Manual.com ManualL 
						

							33English
04Advanced	Featu\bes 
✎No supported \functions when connecting to the PC through network:
 
xThe Backg\bound	Music and Backg\bound	Music	Setting \functions\b
 
xSorting \files by pre\ference in the Photos , Music, and Videos \folders\b
 
xThe � (REW) or µ (FF) button while a movie is playing\b
 
✎The Divx DRM, Multi-audio, embedded caption does not supported\b
 
✎Samsung PC Share manager should be permitted by the \firewall programme on your PC\b
 
✎When you use Media	Play mode through a network connection, According to \functions o\f the provided server:
 
xThe sorting method may vary\b
 
xThe scene search \function may not be supported\b
 
xThe Play	Continuously \function, which resumes playing o\f a video, may not be supported\b
 
– The Play	Continuously \function does not \ysupport multiple u\ysers\b (It will have\y only memorised the\y point where the 
most recent user stopped \yplaying\b)
 
xThe ◄ or ► button may not work depending on the content in\formation\b
 
xI\f you experience any \file stuttering issue while playing a video over a wireless network, we recommend using a wired 
network
 
✎It might not work properly with unlicenced multimedia \files\b
 
✎Need-to-Know List be\fore using Media	Play
 
xMTP (Media Trans\fer Protocol) is not supported\b
 
xThe \file system supports FAT16, FAT32 and NTFS\b
 
xCertain types o\f USB Digital camera and audio devices may not be compatible with this T V\b
 
xMedia Play only supports USB Mass Storage Class (MSC) devices\b MSC is a Mass Storage Class Bulk-Only 
Transport device\b Examples o\f MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not 
supported)\b Devices should be connected directly to the T V’s USB port\b 
 
xBe\fore connecting your device to the T V, please back up your \files to prevent them \from damage or loss o\f data\b 
SAMSUNG is not responsible \for any data \file damage or data loss\b
 
xConnect a USB HDD to the dedicated port, USB	1	(HDD) port\b
 
xDo not disconnect the USB device while it is loading\b
 
xThe higher the resolution o\f the image, the longer it takes to display on the screen\b
 
xThe maximum supported JPEG resolution is 15360X8640 pixels\b
 
xFor unsupported or corrupted \files, the “Not Supported File Format” message is displayed\b
 
xI\f the \files are sorted by Basic View, up to 1000 \files can be displayed in each \folder\b
 
xMP3 \files with DRM that have been downloaded \from a non-\free site cannot be played\b Digital Rights Management 
(DRM) is a technology that supports the creation o\f content, the distribution and management o\f the content in an 
integrated and comprehensive way, including the protection o\f the rights and interests o\f the content providers, the 
prevention o\f the illegal copying o\f contents, as well as managing billings and settlements\b
 
xI\f more than 2 PTP devices are connected, you can only use one at a time\b
 
xI\f more than two MSC devices are connected, some o\f them may not be recognized\b A USB device that requires high 
power (more than 500mA or 5V) may not be supported\b
 
xI\f an over-power warning message is displayed while you are connecting or using a USB device, the device may not 
be recognized or may mal\function\b
 
xI\f the T V has been no input during time set in Auto	P\botection	Time , the Screensaver will run\b
 
xThe power-saving mode o\f some external hard disk drives may be released automatically when connected to the T V\b
 
xI\f a USB extension cable is used, the USB device may not be recognized or the \files on the device may not be read\b
 
xI\f a USB device connected to the T V is not recognized, the list o\f \files on the device is corrupted or a \file in the list is 
not played, connect the USB device to the PC, \format the device and check the connection\b
 
xI\f a \file deleted \from the PC is still \found when Media Play is run, use the “Empty the Recycle Bin” \function on the PC 
to permanently delete the \file\b
[UC6500_XH]BN68-02694B-00L05-1.indb   332010-02-27   오후 12:20:10Downloaded From TV-Manual.com ManualL 
						

							34English
Ad\fanced Features
	
¦ Sc\been	Display
Move to the file you\y desired using the up/dow\yn/right/le\ft button\ys and then press the ENTERE or � (Play) button\b The\y file is 
played\b 
 
✎Supports the View	Devices and Home in Media	Play homepage\b
 
Videos
Playing	Video
1.	 Press the ◄ or ► button to select \yVideos, then press the ENTER
E button in the Media	Play menu\b
2.	 Press the ◄/►/▲/▼ button to select \ythe desired file in the file l\yist\b
3.	 Press the ENTER
E button or � (Play) button\b
 
– The selected file is\y displayed on the to\yp with its playing \ytime\b
 
– I\f video time in\form\yation is unknown, \yplay time and progress bar are not displayed\b
 
– During playing the \yvideo, you can sear\ych using the ◄ and ► button\b 
 
✎In this mode, you can enjoy movie clips contained on a Game, 
but you cannot play the Game itsel\f\b 
 
y Supported Subtitle F\yormats
Name File	extension Fo\bmat
MPEG-4 time-based te\yxt \bttxtXML
SAMI \bsmiHTML
SubRip \bsrtstring-based
SubViewer \bsubstring-based
Micro DVD \bsub or \btxtstring-based
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010 Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
/Movie 01.avi
1/1
Movie 01.avi
SUM Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 0\f.avi
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.aviIn\formation:
You can ascertain the selected 
file name and the number o\f files  and page\b
Sort List Section:
Displays sorting standard\b
 
✎Sorting standard is 
di\f\ferent depending on the 
contents\b
Operation Buttons
 Red (Change 	Device ): Selects a connected device\bB Green ( P\befe\bence ): Sets the file pre\ference\b (not supported in Basic view) Yellow (Select): Selects multiple files \from file list\b Selected files are marked with a symbol\b Blue (So\bting ): Selects the sort list\bT Tools : Displays the option menu\b
 
✎Using the � (REW) or µ (FF) button, file list can move to next or previous page\b
File List Section:
You can confirm the files 
and groups that is sorted by 
each category\b
VideosPage
  Change Device Select     Sorting    T Tools
Movie 01.avi 00:04:03 / 00:07:3\
8
1/1
SUME Chaptering  L Jump  T Tools  R Return
[UC6500_XH]BN68-02694B-00L05-1.indb   342010-02-27   오후 12:20:11Downloaded From TV-Manual.com ManualL 
						

							35English
04Advanced	Featu\bes 
y Supported Video Formats
File	Extension Containe\b Video	Codec ResolutionF\bame	\bate	
(fps) Bit	\bate	
(Mbps) Audio	Codec
*\bavi
*\bmkv AVI 
MKV Divx 3\b11 / 4\bx / 5\y\b1 / 6\b0
1920x10806 ~ 308
MP3 / AC3 / LPCM /\y ADPCM / DTS Core
XviD
1920x10806 ~ 308
H\b264 BP / MP / HP 1920x10806 ~ 3025
MPEG4 SP / ASP 1920x10806 ~ 308
Motion JPEG 800x6006 ~ 30 8
*\bas\f ASFDivx 3\b11 / 4\bx / 5\y\b1 / 6\b0
1920x10806 ~ 308
MP3 / AC3 / LPCM /\y ADPCM / WMA
XviD
1920x10806 ~ 308
H\b264 BP / MP / HP 1920x10806 ~ 3025
MPEG4 SP / ASP 1920x10806 ~ 308
Motion JPEG 800x6006 ~ 30 8
*\bwmv ASFWindow Media Video v9 1920x10806 ~ 3025 WMA
*\bmp4 MP4 H\b264 BP / MP / HP
1920x10806 ~ 3025
 MP3 / ADPCM / AAC\y
MPEG4 SP / ASP 1920x10806 ~ 308
XVID 1920x10806 ~ 308
*\b3gp 3GPP H\b264 BP / MP / HP
1920x10806 ~ 3025
ADPCM / AAC / HE-AA\yC
MPEG4 SP / ASP 1920x10806 ~ 308
*\bvro VRO 
VOB MPEG1 
1920x108024 / 25 / 30 30
AC3 / MPEG / LPCM
MPEG2 1920x108024 / 25 / 30 30
*\bmpg
*\bmpeg PS MPEG1
1920x108024 / 25 / 30 30
AC3 / MPEG / LPCM /\y AAC
MPEG2 1920x108024 / 25 / 30 30
H\b264 1920x10806 ~ 3025
*\bts
*\btp
*\btrp TS MPEG2
1920x108024 / 25 / 30 30
AC3 / AAC / MP3 / \yDD+ / 
HE-AAC
H\b264
1920x10806 ~ 3025
VC1 1920x10806 ~ 3025
Othe\b	Rest\bictions
 
✎NOTE
 
xI\f there are problems with the contents o\f a codec, the codec will not be supported\b
 
xI\f the in\formation \for a Container is incorrect and the \file is in error, the Container will not be able to play 
correctly\b
 
xSound or video may not work i\f the contents have a standard bitrate/\frame rate above the compatible Frame/sec 
listed in the table above\b
 
xI\f the Index Table is in error, the Seek (Jump) \function is not supported\b
Video	Decode\b Audio	Decode\b
•   Supports up to H\b264, Level 4\b1
•   H\b264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not 
supported\b
•   XVID, MPEG4 SP, ASP :
 
– Below 1280 x 720: \y60 \frame max
 
– Above 1280 x 720: \y30 \frame max
•  GMC 2 over is not supported\b
•   H\b263 is not supported\b
•   Only Samsung Techwin MJPEG is supported\b  •
  Supports up to WMA 7, 8, 9, STD
•   WMA 9 PRO does not support 2 channel excess multi channel or 
lossless audio\b
•   WMA sampling rate 22050Hz mono is not supported\b
[UC6500_XH]BN68-02694B-00L05-1.indb   352010-02-27   오후 12:20:12Downloaded From TV-Manual.com ManualL 
						

							36English
Ad\fanced Features
Playing	movie	file	continuously	(Resume	Play)
I\f you exit the pla\yying Videos \function, it \ycan be played later\y \from the point where it was stopped\b
I\f you press the ENTER
E button (Chapte\bing) during playing th\ye file, you can expl\yore scene divided into\y 5 chapters you 
want\b
1.	 Select the movie fil\ye you want to play \ycontinuously by pressing 
the ◄ or ► button to select \yit \from the file list se\yction\b
2.	 Press the 
� (Play) / ENTERE button\b
3.	 Select Play	Continuously (Resume Play) by p\yressing the Blue 
button\b The Movie w\yill begin to play \f\yrom where it was stopped\b
 
✎The Blue button is available when resuming play\b
 
✎I\f the Continuous	Movie	Play	Help \function is set to On 
in the Settings menu, a pop-up message will appear 
when you resume play a movie \file\b
Music
Playing	Music
1.	 Press the ◄ or ► button to select \yMusic, then press the 
ENTER
E button in the Media	Play menu\b
2.		 Press the ◄/►/▲/▼ button to select \ythe desired file in the file 
list\b
3.	 Press the ENTER
E button or � (Play) button\b
 
– During playing the \ymusic, you can sear\ych using the ◄ and ► 
button\b
 
–
� (REW) and µ (FF) buttons do no\yt \function during p\ylay\b
 
✎Only displays the \files with MP3 and PCM \file extension\b Other 
\file extensions are not displayed, even i\f they are saved on the 
same USB device\b
 
✎I\f the sound is strange when playing MP3 \files, adjust the Equalize\b in the Sound menu\b (An over-modulated MP3 \file 
may cause a sound problem\b)
 
✎You can create My	Playlist selecting the desired music in the \file, and can play My	Playlist \b 
Photos
Viewing	a	Photo	(o\b	Slide	Show)
1.	Press the ◄ or ► button to select \yPhotos, then press the 
ENTER
E button in the Media	Play menu\b
2.		 Press the ◄/►/▲/▼ button to select \ythe desired file in the file 
list\b
3.	 Press the ENTER
E button or � (Play) button\b
 
– While a photo list\y is displayed, press the 
� (Play) / 
ENTERE button on the remote control to start slide s\yhow\b
 
– All files in the fil\ye list section wil\yl be displayed in th\ye slide show\b
 
– During the slide sh\yow, files are displayed in order \from 
currently being shown\b
 
✎Music \files can be automatically played during the Slide Show i\f 
the Backg\bound	Music is set to On \b
 
✎The BGM	Mode cannot be changed until the BGM has \finished 
loading\b
Movie 01.avi 00:04:03 / 00:07:3\
8
1/1
SUM Play continuously  E Chaptering  L Jump  T Tools  R Return
Resumes playing from the last viewed 
scene. Play continuously
3/15I Love you
Jhon
Music 1No SingerMusic \fNo SingerMusic 3No SingerMusic 4No SingerMusic 5No Singer
I Love You
Jhon
1st A\bbum
Pop
\f010
4.\fMB
01:10 / 04:0\f
SUME Pause   L Jump   T Tools   R Return
Playlist
Image1024.jpg          1024x768  2010/2/1 3/1\f
SUME Pause   L Previous/Next   T Tools   R Return
Normal
[UC6500_XH]BN68-02694B-00L05-1.indb   362010-02-27   오후 12:20:13Downloaded From TV-Manual.com ManualL 
						

							37English
04Advanced	Featu\bes	
¦ Playing	the	Multiple	Files	
Playing	the	selected	video/music/photo	files
1.	 Press the Yellow button in th\ye file list to sele\yct the desired file\b
2.		 Repeat the above o\yperation to select\y multiple files\b
 
✎NOTE
 
xThe c mark appears to the le\ft o\f the selected \files\b
 
xTo cancel a selection, press the Yellow button again\b 
 
xTo deselect all selected \files, press the TOOLS button 
and select Deselect	All \b
3.		 Press the TOOLS button and select \yPlay	Selected	Contents\b
Playing	the	video/music/photo	file	g\boup
1.	 While a file list i\ys displayed, move to\y the any file in des\yired group\b
2.	 Press the TOOLS button and select \yPlay	Cu\b\bent	G\boup\b
	
¦ Media	Play	Additional	Function
So\bting	the	file	list
Press the Blue butto\yn in the file list \yto sort the files\b
Catego\by Ope\bationsVideosMusic Photos
	Basic 	View It shows whole \folder\b You can view the photo by selecting the \folder\b>
> >
	Title It sorts and displays the file title in Symbol/Number/Alphabet/Special order\b>
> >
	P\befe\bence It sorts and displays the file by pre\ference\b You can change the file pre\ference in the file list 
section using the Green button\b>
> >
	Latest 	Date It sorts and shows files by latest date\b>
>
	Ea\bliest 	Date It sorts and shows files by earliest date\b>
>
	A\btist It sorts the music file by artist in alphabetical\b>
	
Album It sorts the music file by album in alphabetical order\b>
	
Gen\be It sorts music files by the genre\b>
	
Mood It sorts music files by the mood\b You can change the music mood in\formation\b>
	
Monthly It sorts and shows photo files by month\b It sorts only by month (\from January to December) 
regardless o\f year\b>
1/1/Movie 01.avi
SUM
Movie 01.avi Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010 Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 0\f.avi Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
 Change Device  Select     Sorting  T Tools
Videos
2 files selected
Page
[UC6500_XH]BN68-02694B-00L05-1.indb   372010-02-27   오후 12:20:15Downloaded From TV-Manual.com ManualL 
						

							38English
Ad\fanced Features
Videos/Music/Photos	Play	Option	menu
During playing a fil\ye, press the TOOLS button\b
Catego\byOpe\bationsVideosMusicPhotos
Title You can move the other file directly\b
>
Repeat	Mode You can play recorded, movie and music files repeatedly\b>>
Pictu\be	Size You can adjust the picture size \for pre\ference\b>
Pictu\be	Setting You can adjust the picture setting\b (p\b 15, 16, 17, 18)> >
Sound	Setting You can adjust the sound setting\b (p\b 18, 19, 20)>>>
Subtitle	Setting You can play the video file with Subtitle\b This \function only works i\f the subtitles are the 
same file name as the video file\b>
Audio You can enjoy video in one o\f supported languages as required\b The \function is only 
enabled when stream-type files which support multiple audio \formats are played\b>
Stop	Slide 	Show 	/	
Sta\bt 	Slide 	Show You can start or stop a Slide Show\b>
Slide
	Show 	Speed You can select the slide show speed during the slide show\b>
Slide	Show 	Effect You can set variously the slide show e\f\fect\b>
Backg\bound	Music You can set and select background music when watching a Slide Show\b>
Zoom You can zoom into images in \full screen mode\b>
RotateYou can rotate images in \full screen mode\b>
Home	Backg\bound You can move the file to the  Media	Play  desktop\b>
Info\bmation You can see detailed in\formation about the played file\b>>>
Settings
Using	the	Setup	Menu
 
■ Backg\bound	Setting: Select to display \ythe background you want\b
 
■ Cont.	movie	play	help	(Resume	Play)	(On	/	Off): Select to display \ythe help pop-up me\yssage \for continuou\ys movie 
playback\b
 
■ Get	the	DivX®	VOD	\begist\bation	code: Shows the registration code au\ythorized \for the TV\y\b I\f you connect to \ythe DivX web 
site and register the registration code wi\yth a personal acco\yunt, you can downlo\yad VOD registration file\b I\f\y you play the VOD 
registration using \yMedia Play, the registration is com\ypleted\b
 
✎For more in\formation on DivX® VOD, visit “www\bDivX\bcom\b”
 
■ Get	the	DivX®	VOD	deactivation	code: When DivX® VOD i\ys not registered, the registration deactiv\yation code is 
displayed\b I\f you exe\ycute this \function \ywhen DivX® VOD is \yregistered, the current DivX® VOD registration is deac\ytivated\b
 
■ Info\bmation: Select to view in\y\formation about the\y connected device\b
[UC6500_XH]BN68-02694B-00L05-1.indb   382010-02-27   오후 12:20:15Downloaded From TV-Manual.com ManualL 
						

							39English
04Advanced	Featu\besAnynet+
What	is	Anynet+?	t
Anynet+ is a \functi\yon that enables you\y to control all connected Sa\ymsung devices that \ysupport Anynet+ wit\yh your Samsung 
TV’s remote\b The Anynet+ \ysystem can be used \yonly with Samsung de\yvices that have th\ye Anynet+ \feature\b To be sure your 
Samsung device has \ythis \feature, check i\f there is an Anynet+ log\yo on it\b
To	connect	to	Home	Theat\be
1.	Connect the HDMI	IN (1(DVI),	2,	3 or 4) jack on the TV a\ynd the HDMI OUT jac\yk o\f the corresponding Anynet+ de\yvice 
using an HDMI cabl\ye\b
2.	 Connect the HDMI I\yN jack o\f the home \ytheatre and the HDMI OUT \yjack o\f the corresponding Anynet+ de\yvice using an 
HDMI cable\b
 
✎NOTE 
 
xConnect the Optical cable between the DIGITAL	AUDIO	OUT	(OPTICAL) jack on your T V and the Digital Audio Input 
on the Home Theatre\b
 
xWhen \following the connection above, the Optical jack only outputs 2 channel audio\b You will only hear sound \from 
the Home Theatre’s Front, Le\ft and Right speakers and the subwoo\fer\b I\f you want to hear 5\b1 channel audio, connect 
the DIGITAL	AUDIO	OUT	(OPTICAL) jack on the DVD / Satellite Box (i\be\b Anynet Device 1 or 2) directly to the 
Ampli\fier or Home Theatre, not the T V\b
 
xConnect only one Home Theatre\b
 
xYou can connect an Anynet+ device using the HDMI cable\b Some HDMI cables may not support Anynet+ \functions\b
 
xAnynet+ works when the AV device supporting Anynet+ is in the standby or on status\b
 
xAnynet+ supports up to 12 AV devices in total\b Note that you can connect up to 3 devices o\f the same type\b
TV Home TheatreAnynet+ 
Device 1 Anynet+ Device 
2, 3, 4
HDMI Cable HDMI Cable
HDMI Cable
Optical Cable
[UC6500_XH]BN68-02694B-00L05-1.indb   392010-02-27   오후 12:20:16Downloaded From TV-Manual.com ManualL 
						

							40English
Ad\fanced Features
Anynet+	Menu
The Anynet+ menu ch\yanges depending on \ythe type and status\y o\f the Anynet+ devi\yces connected to th\ye TV\b
Anynet+	MenuDesc\biption
View	TV Changes Anynet+ mod\ye to TV broadcast mode\b
Device	List Shows the Anynet+ de\yvice list\b
(device_name) MENU Shows the connected\y device menus\b E\bg\b I\y\f a DVD recorder is connected, t\yhe disc menu o\f 
the DVD recorder will appear\b
(device_name) INFO Shows the play menu\y o\f the connected de\yvice\b E\bg\b I\f a DVD r\yecorder is connected, t\yhe 
play menu o\f the DV\yD recorder will appear\b
Reco\bding: (*recorder) Starts recording immediately usi\yng the recorder\b (This is only ava\yilable \for devices \ythat 
support the recording \function\b)
Stop	Reco\bding: (*recorder) Stops recording\b
Receive\b Sound is played through the receiver\b
I\f more than one recording device is conn\yected, they are displayed as (*recorder) and i\f only one\y recording device is 
connected, it will \ybe represented as (*device\y_name)\b
	
¦ Setting	Up	Anynet+	
 
■ Setup
Anynet+	(HDMI\fCEC)	(Off	/	On): To use the Anynet+ F\yunction, Anynet+	(HDMI\fCEC) must be set to On\b
 
✎When the Anynet+	(HDMI\fCEC) \function is disabled, all the Anynet+ related operations are deactivated\b
Auto	Tu\bn	Off	(No	/	Yes): Setting an Anynet\y+ Device to turn o\f\f automatically whe\yn the TV is turned o\f\f\b
 
✎The active source on the T V must be set to T V to use the Anynet+ \function\b
 
✎Even i\f an external device is still recording, it may turn o\f\f\b
	
¦ Switching	between	Anynet+	Devices	
1.	 Anynet+ devices con\ynected to the TV ar\ye listed\b
 
✎I\f you cannot \find a device you want, press the Red button to re\fresh the list\b
2.	 Select a device and \ypress the ENTER
E button\b You can switch to t\yhe selected device\b
 
✎Only when you set Anynet+	(HDMI\fCEC) to On in the Application menu, the Device	List menu appears\b
 
xSwitching to the selected device may take up to 2 minutes\b You cannot cancel the operation during the switching 
operation\b
 
xI\f you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ \function\b 
Make sure to switch to an Anynet+ device by using the Device	List \b
	
¦ Reco\bding	
You can make a recording o\f a TV Programme using a Sam\ysung recorder\b
1.	 Select Reco\bding\b
 
✎When there are more than two recording devices
 
xWhen multiple recording devices are connected, the recording devices are listed\b Select one recording device in 
the Device	List \b
 
✎When the recording device is not displayed, select Device	List and press the Red button to search devices\b
2.	 Press the EXIT button to exit\b
 
✎You can record the source streams by selecting Reco\bding : (device_name)\b
 
✎Pressing the � (REC) button will record whatever you are currently watching\b I\f you are watching video \from 
another device, the video \from the device is recorded\b
 
✎Be\fore recording, check whether the antenna jack is properly connected to the recording device\b To properly 
connect an antenna to a recording device, re\fer to the recording device’s users manual\b
[UC6500_XH]BN68-02694B-00L05-1.indb   402010-02-27   오후 12:20:16Downloaded From TV-Manual.com ManualL