Samsung UE 40C8000 User Manual

							21English
03Basic	Featu\bes3D
This exciting new \y\feature enables you to 
view 3D content\b In\y order to \fully enjoy 
this \feature, you must purchase a pair 
o\f Samsung 3D Activ\ye Glasses (SSG-
2100AB, SSG-2200AR,\y SSG-2200KR) to 
view 3D video\b
Samsung 3D Active G\ylasses are sold 
separately\b For mor\ye detailed purchasing 
in\formation, contac\yt the retailer where you purchased this TV\b
 
✎I\f there is any obstacle between the emitter and 3D 
Active Glasses, the proper 3D e\f\fect may not be 
obtained\b
 
■ 3D	Mode: Select the 3D inp\yut \format\b
 
✎I\f you want to \feel the 3D e\f\fect \fully, please wear 
the 3D Active Glasses \first, and then select  
3D	mode \from the list below that provides the 
best 3D viewing experience\b
 
✎When watching 3D i\ymages, turn on 3D Active 
Glasses\b
3D	Mode Ope\bation
Off Turns the 3D \function \yo\f\f\b
2D	→	3DChanges a 2D image\y to 3D\b
Side	by	SideDisplays two images\y next to 
each other\b
Top	&	BottomDisplays one image \yabove 
another\b
Line	by	LineDisplays the images\y \for the le\ft 
and right eye alter\ynately in rows\b
Ve\btical	St\bipeDisplays the images\y \for the 
le\ft and right eye a\ylternately in 
columns\b
Checke\b	
Boa\bdDisplays the images\y \for the 
le\ft and right eye a\ylternately in 
pixels\b
F\bequency
Displays the images\y \for the 
le\ft and right eye a\ylternately in 
\frames\b
 
✎“ Side by Side” and “Top & Bottom” are available 
when the resolution is 720p, 1080i and 1080p 
in DT V,	HDMI and USB mode or set to PC 
connecting through HDMI/DVI cable\b
 
✎“Vertical Strip”, “Line by Line” and “Checker 
Board” are available when the resolution is set to 
PC connecting through HDMI/DVI cable\b
 
✎“Frequency” displays the \frequency (60Hz only) 
when the resolution is set to PC\b
 
■ 3D	→	2D	(Off	/	On): Displays the imag\ye \for the le\ft eye 
only\b
 
✎This \function is deactivated when 3D	Mode set to 
“2D → 3D” or Off \b
 
■ 3D	View	point: The overall adjus\ytment o\f 3D 
perspective\b
 
✎This \function is deactivated when 3D	Mode set to 
“2D → 3D” or Off \b
 
■ Depth: Adjusts \focus / de\ypth in “2D → 3D” mode\b
 
✎This \function is only activated when the 3D	Mode 
is “2D → 3D”\b
 
■ Pictu\be	Co\b\bection: Adjusts the image\ys \for the le\ft and 
right eye\b
 
■ 3D	Auto	View	(Off	/	On): I\f 3D	Auto	View is set to On, 
a “Side-By-Side” \form\yat HDMI signal wit\yh one o\f the 
resolutions below i\ys automatically swi\ytched to 3D\b Here, 
correct 3D in\formation \ymust be sent \from the HDMI 1\b3 
transmitter\b
 
✎I\f a 3D \failure occurs due to a 3D in\formation error, 
set 3D	Auto	View to Off and manually select a 
3D	Mode using the 3D button or corresponding 
menu\b
 
✎Support resolution (16:9 only)
Resolution F\bequency	(Hz)
1280 x 720p 50 / 60 Hz
1920 x 1080i 50 / 60 Hz
1920 x 1080p 24 / 30 / 50 / 60 \yHz
Resolution	suppo\bted	fo\b	HDMI	PC	mode
The resolution \for HDMI \yPC mode is optimize\yd to 1920 x 
1080 input\b
An input resolution other th\yan 1920 x 1080 may \ynot be 
displayed properly in 3D displa\yy or \full screen mode\b
3D emitter
3D
[UC8790]BN68-02849D-01L04.indb   212010-04-01   오후 7:57:08Downloaded From TV-Manual.com ManualL 
						

							22English
Basic Features
How	to	watch	the	3D	image
1.	Press the CONTENT button, then the \yContent	View 
menu will appear\b
2.	 Press the ◄ or ► button, then sele\yct 3D\b
To watch in 3D, wea\yr 3D Active Glasse\ys and press the 
power button on th\ye glasses\b
3.	 Select OK, then press the ENTER
E button\b
4.	 Using the ◄ or ► buttons on your remote control, 
selects the 3D	Mode o\f the image you w\yant to view\b
 
✎Some 3D modes may not be available depending 
on the \format o\f the image source\b
Suppo\bted	fo\bmats	and	ope\bating	specifications	fo\b	
HDMI	1.4
Sou\bce 	signal 	fo\bmat Standa\bd	HDMI 	1.4 	3D
1920x1080p@24Hz x 2 1920x2205p@24Hz
1280x720p@60Hz x 2 1280x1470p@60Hz
1280x720p@50Hz x 2 1280x1470p@50Hz
The mode is automat\yically switched to \y3D mode \for the 3D \y
video input in one \yo\f the \formats abov\ye\b
For the HDMI 1\b4@24\yHz \format, the TV i\ys optimized as 
\follows:
 
– Resolution	Fi\bst	Display	Mode: I\f Motion	Plus is set 
to Off,	Clea\b or Standa\bd, you can watch the\y video 
at a high resolution optimize\yd to the resolution o\f the 
source video\b
 
– Judde\b	Reduction	Display	Mode: When 
Motion	Plus is set to Smooth or Custom, you can 
watch a smooth pic\yture without judder\b
Befo\be	using	3D	function...
 
✎NOTE
 
xYou may notice a small amount o\f screen \flickering 
when watching 3D images in poor light conditions 
(\from a strobe light, etc\b), or under a \fluorescent lamp 
(50Hz ~ 60Hz) or 3 wavelength lamp\b I\f so, dim the 
light or turn the lamp o\f\f\b
 
x3D mode is automatically disabled in \following cases: 
when changing a channel or the input source, or 
accessing Media	Play or Inte\bnet@T V \b
 
xSome Picture \functions are disabled in 3D mode\b
 
xPIP and data broadcast is not supported in 3D 
mode\b
 
xData broadcasts (MHEG / MHP) are not supported 
in 3D mode\b
 
x3D Active Glasses \from other manu\facturers may not 
be supported\b
 
xWhen the T V is initially powered on, may take some 
time until the 3D display is optimized\b
 
xThe 3D Active Glasses may not work properly i\f there 
is any other 3D product or electronic devices turned 
on near the glasses or T V\b I\f there is a problem, keep 
other electronic devices as \far away as possible \from 
the 3D Active Glasses\b
 
xWhen watching pictures \from a 50Hz 3D source with 
its Game mode On, visually-sensitive viewers may 
see some \flicker on bright images\b
 
xPhotos o\f Media	Play are shown in “2D → 3D” 
mode only\b
 
xI\f lying on your side, the 3D-e\f\fects may not be 
displayed\b 
 
xBe sure to stay within th\ye viewing angle an\yd optimum 
TV viewing distance\y when watching 3D \ypictures\b
 
– Otherwise, you may \ynot be able to enj\yoy proper 3D 
e\f\fects\b
3D
OK
To watch in 3D, wear 3D glasses and press 
the power button on the glasses. Viewing 
3D TV motion pictures for long periods 
may cause eye fatigue and/or dizziness. 
Cancel
U Move  E Enter  e Exit
3D3D
Using the LEFT / RIGHT keys on the remote control, 
select the icon suitable for the picture on screen.Using the LEFT / RIGHT keys on the remote control, 
select the icon suitable for the picture on screen.
U Move  E Enter  e ExitU Move  E Enter  e Exit
[UC8790]BN68-02849D-01L04.indb   222010-04-01   오후 7:57:09Downloaded From TV-Manual.com ManualL 
						

							23English
03Basic	Featu\besPictu\be	Reset	(OK	/	Cancel)
Resets your current picture mode to its de\faul\yt settings\b
	
¦ Setting	up	the	TV	with	You\b	PC
Set the input source to PC\b
Auto	Adjustment	t
Adjust \frequency values/posi\ytions and fine tune \ythe settings 
automatically\b 
 
✎Not available when connecting with an HDMI/DVI cable\b
Sc\been
 
■ Coa\bse	/	Fine: Removes or reduces picture noise\b I\f the 
noise is not removed by Fine-tuni\yng alone, then adju\yst 
the \frequency as best as \ypossible (Coa\bse) and Fine-
tune again\b A\fter t\yhe noise has been \yreduced, readjust 
the picture so that it is al\yigned to the centre o\f screen\b 
 
■ Position: Adjust the PC scr\yeen position with \ydirection 
button (▲ / ▼ / ◄ / ►)\b 
 
■ Image	Reset: Resets the image\y to de\fault setting\ys\b
Using	You\b	TV	as	a	Compute\b	(PC)	Display
Setting Up Your PC So\ftware (Based on Windows XP) 
Depending on the ve\yrsion o\f Windows and the video\y card, 
the actual screens on your PC may\y di\f\fer in which case t\yhe 
same basic set-up \yin\formation will al\ymost always be appl\yied\b 
(I\f not, contact yo\yur computer manu\fac\yturer or Samsung 
Dealer\b)
1.	 Click on “Control Panel” on the W\yindows start menu\b \y
2.	 Click on “Appearan\yce and Themes” in t\yhe “Control 
Panel” window and a\y display dialog-box \ywill appear\b 
3.	 Click on “Display” \yand a display dialog\y box will appear\b 
4.	 Navigate to the “Se\yttings” tab on the\y display dialog-box\b\y
 
y The correct size setting (\yresolution) [Optimu\ym: 1920 X 
1080 pixels] 
 
y I\f a vertical-\frequency option exis\yts on your display 
settings dialog box\y, the correct value is “60” \yor “60 Hz”\b 
Otherwise, just cl\yick “OK” and exit t\yhe dialog box\b
Soun\b Menu
	
¦ Changing	the	P\beset	Sound	Mode
SRS	Theate\bSound	t 
 
■ Standa\bd: Selects the norma\yl sound mode\b 
 
■ Music: Emphasizes music \yover voices\b 
 
■ Movie: Provides the best sou\ynd \for movies\b 
 
■ Clea\b	Voice: Emphasizes voices\y over other sounds\b\y 
 
■ Amplify: Increase the intensity \yo\f high-\frequency sound 
to allow a better \ylistening experien\yce \for the hearing \y
impaired\b
	
¦ Adjusting	Sound	Settings
Equalize\b
Adjusts the sound m\yode (standard sound mode only)\b
 
■ Balance	L/R: Adjusts the balan\yce between the rig\yht and 
le\ft speaker\b 
 
■ 100Hz	/	300Hz	/	1kHz	/	3kHz	/	10kHz (Bandwidth 
Adjustment): Adjust\ys the level o\f spec\yific bandwidth 
\frequencies\b 
 
■ Reset: Resets the equal\yizer to its de\fault\y settings\b
	
¦ Sound	Systems,	Etc.
SRS	T\buSu\b\bound	HD	(Off	/	On)	t
(standard sound mode only) 
This \function provides a virtual 5\b\y1 channel surround sound 
experience through a pair o\f spea\ykers using HRTF (Head 
Related Trans\fer Function) t\yechnology\b
SRS	T\buDialog	(Off	/	On)	
(standard sound mode only) 
This \function allow\ys you to increase the intensity \yo\f a voice 
over background music or sound\y e\f\fects so that dialo\yg can 
be heard more clearly\b
[UC8790]BN68-02849D-01L04.indb   232010-04-01   오후 7:57:09Downloaded From TV-Manual.com ManualL 
						

							24English
Basic Features
Audio	Language	
(digital channels o\ynly) 
Change the de\fault \yvalue \for audio lan\yguages\b 
 
✎The available language may di\f\fer depending on the 
broadcast\b
Audio	Fo\bmat	
(digital channels o\ynly) 
When sound is emitt\yed \from both the main s\ypeaker and the 
audio receiver, a sound echo may \yoccur due to the de\ycoding 
speed di\f\ference between the m\yain speaker and the\y audio 
receiver\b In this case, use\y the TV Speaker \fun\yction\b
 
✎Audio	Fo\bmat option may di\f\fer depending on the 
broadcast\b 5\b1ch Dolby digital sound is only available 
when connecting an external speaker through an 
optical cable\b 
Audio	Desc\biption	
(not available in \yall locations) (dig\yital 
channels only) 
This \function handl\yes the Audio Stream 
\for the AD	(Audio Description)\y which is 
sent along with th\ye Main audio \from the 
broadcaster\b 
 
■ Audio	Desc\biption	(Off	/	On): Turn 
the audio descripti\yon \function on or 
o\f\f\b 
 
■ Volume: Adjust the audio \ydescription volume\b\y
Auto	Volume	(Off	/	No\bmal	/	Night)
To equalize the vol\yume level on each \ychannel, set to No\bmal\b
 
■ Night: This mode provides an improved sound 
experience compared to No\bmal mode, making almos\yt 
no noise\b It is use\y\ful at night\b
Speake\b	Select	(Exte\bnal	Speake\b	/		
TV	Speake\b)	
A sound echo may oc\ycur due to a di\f\ference in decoding 
speed between the m\yain speaker and the\y audio receiver\b In 
this case, set the\y TV to Exte\bnal	Speake\b.
 
✎When Speake\b	Select is set to Exte\bnal	Speake\b , the 
volume and MUTE buttons will not operate and the 
sound settings will be limited\b 
 
✎When Speake\b	Select is set to Exte\bnal	Speake\b
 
xT V	Speake\b:	Off,	Exte\bnal	Speake\b:	On
 
✎When Speake\b	Select is set to T V	Speake\b
 
xT V	Speake\b:	On,	Exte\bnal	Speake\b:	On
 
✎I\f there is no video signal, both speakers will be mute\b
Additional	Setting
(digital channels o\ynly)
 
■ DTV	Audio	Level	(MPEG	/	HE\fAAC): This \function 
allows you to reduce the disparity \yo\f a voice signal 
(which is one o\f th\ye signals received during a dig\yital TV 
broadcast) to a desir\yed level\b
 
✎According to the type o\f broadcast signal, MPEG	
/	HE\fA AC can be adjusted between -10dB and 
0dB\b 
 
✎To increase or decrease the volume, adjust 
between the range 0 and -10 respectively\b
 
■ SPDIF	Output: SPDIF (Sony Philip\ys Digital InterFac\ye) 
is used to provide digital sound,\y reducing inter\ference 
going to speakers \yand various digital\y devices such as a \y
DVD player\b
Audio	Fo\bmat: During the reception o\f a digit\yal TV 
broadcast, you can se\ylect the Digital A\yudio output 
(SPDIF) \format \from the options PCM or Dolby	Digital\b
Audio	Delay: Correct audio-video sync\y problems, when 
watching TV or vide\yo, and when listeni\yng to digital audio\y 
output using an ex\yternal device such as \yan AV receiver 
(0ms ~ 250ms)\b
 
■ Dolby	 Digital	 Comp	(Line	/	RF): This \function minimizes 
signal disparity be\ytween a dolby digita\yl signal and a 
voice signal (i\be\b \yMPEG Audio, HE-AAC, \yATV Sound)\b
 
✎Select Line to obtain dynamic sound, and RF 
to reduce the di\f\ference between loud and so\ft 
sounds at night time\b
Line: Set the output le\yvel \for signals greater or less than\y 
-31dB (re\ference) to either -2\y0dB or -31dB\b 
RF: Set the output le\yvel \for signals greater or less than\y 
-20dB (re\ference) to either -1\y0dB or -20dB\b
AD
[UC8790]BN68-02849D-01L04.indb   242010-04-01   오후 7:57:10Downloaded From TV-Manual.com ManualL 
						

							25English
03Basic	Featu\besSound	Reset	(OK	/	Cancel)
Reset all sound set\ytings to the \factor\yy de\faults\b
	
¦ Selecting	the	Sound	Mode	t
When you set to Dual f\fg, the current sound mode is 
displayed on the scr\yeen\b
Audio  Type  Dual f\fg De\fault 
A2 
Stereo  Mono 
Mono	
Automatic 
change 
Stereo  Ste\beo ↔ Mono	
Dual  Dual 
f ↔ Dual g Dual f 
NICAM  Stereo  Mono 
Mono	
Automatic 
change 
Stereo  Mono ↔ Ste\beo	
Dual  Mono ↔ Dual 
f
 Dual g  Dual f 
 
✎I\f the stereo signal is weak and an automatic switching 
occurs, then switch to the mono\b 
 
✎Only activated in stereo sound signal\b 
 
✎Only available when the Input source is set to T V \b
Setup Menu
	
¦ Setting	the	Time
Time	
 
■ Clock: Setting the clock\y is \for using vario\yus timer 
\features o\f the TV\b
 
OThe current time will appe\yar every time you p\yress 
the INFO	button\b
 
✎I\f you disconnect the power cord, you have to set 
the clock again\b
Clock	Mode	(Auto	/	Manual)
 
✎Depending on the broadcast station and signal, 
the auto time set up may not be correct\b In this 
case, set the time manually\b 
 
✎The antenna must be connected in order to set 
the time automatically\b
Clock	Set: Set the Day,	Month,	Yea\b,	Hou\b and Minute 
manually\b
 
✎Available only when Clock	Mode is set to 
Manual \b
Time	Zone (depending on the \ycountry): Select you\yr time 
zone\b
 
✎When Count\b y is set to Othe\bs , you can use this 
\function\b
 
✎This \function is only available when the  
Clock	Mode is set to Auto \b
	
¦ Using	the	Sleep	Time\b
 
■ Sleep	Time\b	t: Automatically shu\yts o\f\f the TV 
a\fter a preset period o\f time\y\b (30, 60, 90, 120,\y 150 and 
180 minutes)\b
 
✎To cancel Sleep	Time\b , select Off\b
	
¦ Setting	the	On	/	Off	Time\b
 
■ Time\b	1	/	Time\b	2	/	Time\b	3: Three di\f\ferent on / o\f\f 
timer settings can\y be made\b You must set the cl\yock first\b
On	Time	/	Off	Time: Set the hour, minute, and activ\yate 
/ inactivate\b (To activate timer w\yith the setting you\y’ve 
chosen, set to Activate\b) 
Volume: Set the desired volume level\b 
Sou\bce: Select TV or USB content to be pla\yyed when 
the TV is turned on automaticall\yy\b (USB can be selected 
only when a USB devi\yce is connected to \ythe TV) 
Antenna (when the Sou\bce is set to TV): Select ATV or 
DTV\b 
Channel (when the Sou\bce is set to TV): Select the 
desired channel\b 
Contents (when the Sou\bce is set to USB): Select a 
\folder in the USB de\yvice containing mu\ysic or photo files \y
to be played when t\yhe TV is turned on automaticall\yy\b 
 
✎NOTE
 
xI\f there is no music \file on the USB device or the 
\folder containing a music \file is not selected, the 
Timer \function does not operate correctly\b 
 
xWhen there is only one photo \file in the USB 
device, the Slide Show will not play\b 
 
xI\f a \folder name is too long, the \folder cannot be 
selected\b 
 
xEach USB you use is assigned its own \folder\b 
When using more than one o\f the same type o\f 
USB, make sure the \folders assigned to each 
USB have di\f\ferent names\b
10 TVATV 1
0000

0000
Timer 1On Time
Off Time
Volume Inactivate
Inactivate
Sun
Mon TueWed Thu FriSatOnce Source
AntennaChannel
Repeat
L Move  U Adjust  E Enter  R Return
[UC8790]BN68-02849D-01L04.indb   252010-04-01   오후 7:57:11Downloaded From TV-Manual.com ManualL 
						

							26English
Basic Features
Repeat: Select Once,	Eve\byday,	Mon~F\bi,	Mon~Sat,	
Sat~Sun or Manual to set at you conv\yenience\b I\f you 
select Manual, you \ycan set up the day \yyou want to 
activate the timer\y\b
 
✎The c mark indicates the day is selected\b
 
✎Auto Power O\f\f (available only when the T V is turned on 
by Timer): The T V will be automatically turned o\f\f a\fter 3 
hours o\f being le\ft idle to prevent overheating\b
	
¦ Locking	P\bog\bammes
Secu\bity
 
✎The PIN input screen appears be\fore the setup screen\b 
 
✎Enter your 4-digit PIN, the de\fault o\f which is “0-0-0-0”\b 
Change the PIN using the Change	PIN option\b
 
■ Child	Lock	(Off	/	On): Lock channels in\y Channel	
Manage\b, to prevent unauthorized \yusers, such as 
children, \from watching unsuit\yable programme\b
 
✎Available only when the Input source is set to T V \b
 
■ Pa\bental	Lock	(depending on the c\yountry): Prevent 
unauthorized users,\y such as children, \from watching 
unsuitable programme with a use\yr-defined 4-digit PIN \y
code\b I\f selected ch\yannel is locked, th\ye “
\” symbol will 
be displayed\b
Allow	All: Unlock All TV ra\ytings (Not support\yed in 
France)\b
 
✎When Pa\bental	Lock	is set to 18 , the PIN input 
screen appears be\fore changing the channels 
(France only)\b
 
■ Change	PIN: Change your perso\ynal ID number required 
to set up the TV\b
 
✎I\f you \forget the PIN code, press the remote 
control buttons in the \following sequence, which 
resets the PIN to “0-0-0-0”: POWER (o\f\f) → 
MUTE → 8 → 2 → 4 → POWER (on)\b
	
¦ Othe\b	Featu\bes
Language
 
■ Menu	Language: Set the menu lang\yuage\b 
 
■ Teletext	Language: Set a desired language \for tel\yetext\b 
 
✎English is the de\fault in cases where the selected 
language is unavailable in the broadcast\b 
 
■ P\befe\bence	(P\bima\by	Audio	Language	/		
Seconda\by	Audio	Language	/	P\bima\by	Subtitle	
Language	/	Seconda\by	Subtitle	Language	/		
P\bima\by	Teletext	Language	/	Seconda\by	Teletext	
Language): Select a language\y, which will be th\ye de\fault 
language when a ch\yannel is selected\b \y
Subtitle
Use this menu to s\yet the Subtitle mode\b 
 
■ Subtitle	(Off	/	On): Switches subtitle\ys on or o\f\f\b 
 
■ Mode	(No\bmal	/	Hea\bing	Impai\bed): Sets the subtitle\y 
mode\b 
 
■ Subtitle	Language: Sets the subtitle\y language\b 
 
✎I\f the programme you are watching does not 
support the Hea\bing	Impai\bed \function, No\bmal 
automatically activates even i\f the  
Hea\bing	Impai\bed mode is selected\b 
 
✎English is the de\fault in cases where the selected 
language is unavailable in the broadcast\b
Digital	Text	(Disable	/	Enable)	
(UK only) 
I\f the programme broadcasts with digit\yal text, this \featu\yre is 
enabled\b
Netwo\bk	(Netwo\bk	Type	/	Netwo\bk	Setup	
/	Netwo\bk	Test	/	SWL(Samsung	Wi\beless	
Link)	/	SWL	connect)
For details on set \yup options, re\fer to the “Networ\yk 
Connection” instru\yctions (p\b 30)\b
Gene\bal
 
■ Game	Mode	(Off	/	On): When connecting \yto a game 
console such as Pl\yayStation™ or Xbox™\y, you can enjoy 
a more realistic gaming ex\yperience by selecti\yng game 
mode\b
 
✎NOTE
 
xPrecautions and limitations \for game mode
 
– To disconnect the ga\yme console and conn\yect 
another external device, set Game	Mode to Off in 
the setup menu\b 
 
– I\f you display the T\yV menu in Game	Mode, the 
screen shakes slightl\yy\b 
 
xGame	Mode	is not available when the input source 
is set to T V or PC \b
 
xA\fter connecting the game console, set Game	Mode 
to On \b Un\fortunately, you may notice reduced picture 
quality\b
 
xI\f Game	Mode is On :
 
– Pictu\be mode is set to Standa\bd and Sound mode 
is set to Movie\b
 
– Equalize\b is not available\b
[UC8790]BN68-02849D-01L04.indb   262010-04-01   오후 7:57:11Downloaded From TV-Manual.com ManualL 
						

							27English
03Basic	Featu\bes 
■ BD	Wise	(Off	/	On): Provides the optimal \ypicture quality 
\for Samsung DVD, Bl\yu-ray and Home Thea\ytre products 
which support BD	Wise\b When BD	Wise is turned On, 
the picture mode is automatic\yally changed to the\y optimal 
resolution\b
 
✎Available when connecting Samsung products 
that support BD	Wise through a HDMI cable\b
 
■ Menu	T\banspa\bency	(B\bight	/	Da\bk): Se t the 
Transparency o\f the menu\b 
 
■ Melody	(Off	/	Low	/	Medium	/	High): Set so that a 
melody plays when th\ye TV is turned on or o\f\f\b
 
✎Melody is disabled when FastSta\bt is On \b
 
■ FastSta\bt	(Off	/	On): When the TV is p\yowered on, the 
screen will come on q\yuickly with this \fe\yature\b
 
■ Light	Effect	(Off	/	In	Standby	/	Watching	TV	/	
Always): You can turn the LED on/o\f\f on the \front o\f TV\b 
Turn it o\f\f to save power or \yi\f the LED is too br\yight \for 
you\b
 
✎Set the Light	Effect to Off to reduce the power 
consumption\b
 
✎The colour o\f light may very depending on the 
model\b
	
¦ Common	Inte\bface
 
■ CI	Menu: This enables the\y user to select \from the CAM-
provided menu\b Select \ythe CI Menu based o\yn the menu 
PC Card\b 
 
■ Application	Info: View in\formation on \ythe CAM inserted 
into the CI slot a\ynd on the “CI or CI\y+ CARD” which is 
inserted into the C\yAM\b You can install the\y CAM anytime 
whether the TV is \yon or o\f\f\b
1.	 Purchase a CI CAM modu\yle at your nearest dealer or by 
phone\b 
2.	 Firmly insert the “\yCI or CI+ CARD” in\yto the CAM in the \y
direction o\f the arrow\b 
3.	 Insert the CAM wit\yh the “CI or CI+ C\yARD” into the 
common inter\face sl\yot, in the direction o\f the arrow so 
that it aligns par\yallel with the slo\yt\b 
4.	 Check i\f you can se\ye a picture on a scrambled si\ygnal 
channel\b
Wi\beless	Remote	Cont\bol
Turn wireless remote controls on or o\f\f or give permissio\yn to 
wireless remote controls\b
	
¦ Pictu\be	In	Pictu\be	(PIP)
PIP	t
You can watch the T\yV tuner and one ext\yernal video source 
simultaneously\b PIP (Picture-in-Picture) does not \functio\yn in 
the same mode\b 
 
✎NOTE
 
xFor PIP sound, re\fer to the Sound	Select 
instructions\b 
 
xI\f you turn the T V o\f\f while watching in PIP mode, the 
PIP window will disappear\b 
 
xYou may notice that the picture in the PIP window 
becomes slightly unnatural when you use the main 
screen to view a game or karaoke\b 
 
xWhile Inte\bnet@T V is in operation, the PIP \function 
cannot be used\b 
 
xPIP settings 
Main	pictu\be Sub	pictu\be
Component,	HDMI1/DVI,	
HDMI2,	HDMI3,	HDMI4,	
PC TV
 
■ PIP	(Off	/	On): Activate or deact\yivate the PIP \funct\yion\b 
 
■ Channel: Select the channe\yl \for the sub-screen\b 
 
■ Size	(
Õ	/	Ã	/	À	/	Œ): Select a size \for\y the sub-
picture\b 
 
■ Position	(
Ã	/	–	/	—	/	œ): Select a position\y \for the 
sub-picture\b 
 
✎In Double (À, Œ) mode, Position cannot be 
selected\b
 
■ Sound	Select	(Main	/	Sub): You can choose the \y
desired sound (Main	/	Sub) in PIP mode\b
[UC8790]BN68-02849D-01L04.indb   272010-04-01   오후 7:57:12Downloaded From TV-Manual.com ManualL 
						

							28English
Basic Features
Support Menu
Self	Diagnosis
 
✎Sel\f Diagnostic might take \few seconds, this is part o\f 
the normal operation o\f the T V\b
 
■ Pictu\be	Test	(Yes	/	No): Use to check \for \ypicture 
problems\b 
 
■ Sound	Test	(Yes	/	No): Use the built-in\y melody sound to 
check \for sound problems\b 
 
✎I\f you hear no sound \from the T V’s speakers, 
be\fore per\forming the sound test, make sure 
Speake\b	Select is set to T V	Speake\b in the 
Sound menu\b 
 
✎The melody will be heard during the test even i\f 
Speake\b	Select is set to Exte\bnal	Speake\b or the 
sound is muted by pressing the MUTE button\b
 
■ Signal	Info\bmation: (digital channels\y only) HDTV 
channel’s reception quality is\y either per\fect or \ythe 
channels are unavailable\b Adju\yst your antenna to \y
increase signal strength\b 
 
■ T\boubleshooting: I\f the TV seems t\yo have a problem, 
re\fer to this descri\yption\b
 
✎I\f none o\f these troubleshooting tips apply, contact 
the Samsung customer service centre\b
Softwa\be	Upg\bade
Softwa\be	Upg\bade can be per\formed v\yia a broadcasting 
signal or by networ\yk connection or dow\ynloading the latest\y 
firmware \from “www\bsamsung\bcom,” to a\y USB memory 
device\b 
Cu\b\bent	Ve\bsion the so\ftware already installed in th\ye TV\b
 
✎So\ftware is represented as “Year/Month/Day_Version”\b
Installing	the	Latest	Ve\bsion
 
■ By	USB: Insert a USB 
drive containing th\ye 
firmware upgrade file, 
downloaded \from 
“www\bsamsung\bcom,” 
into the TV\b Please 
be care\ful not to 
disconnect the powe\yr 
or remove the USB 
drive until upgrade\ys are complete\b The TV \ywill be turned 
o\f\f and on automatica\ylly a\fter completin\yg the firmware 
upgrade\b When so\ftwa\yre is upgraded, video\y and audio 
settings you have m\yade will return to their de\fault \y
settings\b We advise you to to \ywrite down your set\ytings 
so that you can eas\yily reset them a\fter the\y upgrade\b 
 
■ By	Online: Upgrade the so\ftw\yare using the Internet\b
 
✎First, con\figure your network\b For detailed 
procedures on using the Network Setup, re\fer to 
the “Network Connection” instructions\b 
 
✎I\f the internet connection doesn’t operate properly, 
the connection may be broken\b Please retry 
downloading\b I\f the problem persists, download by 
USB and upgrade\b
 
■ By	Channel: Upgrade the so\ftw\yare using the 
broadcasting signal\b
 
✎I\f the \function is selected during the so\ftware 
transmission period, so\ftware will be automatically 
searched and downloaded\b 
 
✎The time required to download the so\ftware is 
determined by the signal status\b
 
■ Standby	Mode	Upg\bade: A manual upgrade \ywill be 
automatically per\fo\yrmed at selected ti\yme\b Since the 
power o\f the unit i\ys turned on internally, the screen 
may be turned on slightly \for \ythe LED product\b This 
phenomenon may cont\yinue \for more than 1 hour unti\yl 
the so\ftware upgrade is comple\yte\b 
 
■ Alte\bnative	Softwa\be (backup): Displays\y the so\ftware 
version downloaded t\yhrough By	Online\b During the 
so\ftware upgrading, When t\yhe Upgrade will dis\ycontinue 
\from last step, this\y \function be activa\yted\b 
HD	Connection	Guide
Re\fer to this in\for\ymation when connec\yting external devices 
to the TV\b
Contact	Samsung
View this in\formatio\yn when your TV does\y not work properly 
or when you want to\y upgrade the so\ftwa\yre\b You can find 
in\formation regarding our call centr\yes, and how to down\yload 
products and so\ftware\b
Software Upgrade
By USB     ►
By Online
By Channel
Standby Mode Upgrade  : 2 Hours Later
Alternative Software  2010/01/15_00000
U Move  E Enter  R Return
Current Version 2010/01/18_000001
USB Drive
TV Rear Panel
(HDD
)
or
[UC8790]BN68-02849D-01L04.indb   282010-04-01   오후 7:57:12Downloaded From TV-Manual.com ManualL 
						

							29English
04Advanced	Featu\bes
Ad\fanced Features
Connecting to a PC
Using	an	HDMI/DVI	Cable	/	a	D\fsub	Cable
AUDIO OUT
AUDIO OUTPC OUT
DVI OUT
Display	Modes	(D\fSub	and	HDMI/DVI	Input)
Optimal resolution is 1920 \yX 1080 @ 60 Hz\b
Mode ResolutionHo\bizontal	F\bequency
(KHz) Ve\btical	F\bequency
(Hz) Pixel	Clock	F\bequency
(MHz) Sync	Pola\bity
(H	/	V)
IBM 640 x 350
720 x 400 31\b469
31\b469  70\b086
70\b087 25\b175
28\b322 +/-
-/+
MAC 640 x 480
832 x 624
1152 x 870 35\b000
49\b726
68\b681  66\b667
74\b551
75\b062 30\b240
57\b284
100\b000  -/-
-/-
-/-
VESA	CVT 720 x 576
1152 x 864
1280 x 720
1280 x 960  35\b910
53\b783
56\b456
75\b231  59\b950
59\b959
74\b777
74\b857 32\b750
81\b750
95\b750
130\b000 -/+
-/+
-/+
-/+
VESA	DMT 640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024 1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1600 x 1200
1680 x 1050 31\b469 
37\b861 
37\b500 
37\b879 
48\b077 
46\b875 
48\b363 
56\b476 
60\b023 
67\b500 
63\b981 
79\b976 
45\b000
49\b702 
62\b795 
60\b000 
47\b712 
55\b935 
70\b635 
75\b000
65\b290  59\b940
72\b809
75\b000
60\b317
72\b188
75\b000
60\b004
70\b069
75\b029 
75\b000
60\b020
75\b025
60\b000
59\b810
74\b934
60\b000
60\b015
59\b887
74\b984
60\b000
59\b95425\b175 
31\b500 
31\b500 
40\b000 
50\b000 
49\b500 
65\b000 
75\b000 
78\b750 
108\b000 
108\b000 
135\b000  74\b250
83\b500 
106\b500 
108\b000  85\b500 
106\b500 
136\b750 
162\b000
146\b250  -/-
-/-
-/-
+/+
+/+
+/+ -/-
-/-
+/+
+/+
+/+
+/+
+/+ -/+ 
-/+ 
+/+
+/+ -/+ 
-/+
+/+ -/+ 
VESA	GTF 1280 x 720 
1280 x 1024 52\b500 
74\b620  70\b000
70\b00089\b040
128\b943  -/+ 
-/-
VESA	DMT	/	DTV	CEA 1920 x 1080p
67\b500  60\b000148\b500  +/+
 
✎NOTE
 
xFor HDMI/DVI cable connection, you must use the HDMI	IN	1(DVI) jack\b 
 
xThe interlace mode is not supported\b 
 
xThe set might operate abnormally i\f a non-standard video \format is selected\b 
 
xSeparate and Composite modes are supported\b SOG(Sync On Green) is not supported\b 
[UC8790]BN68-02849D-01L04.indb   292010-04-01   오후 7:57:14Downloaded From TV-Manual.com ManualL 
						

							30English
Ad\fanced Features
Network Connection\h
You can set up your \yTV so that it can \yaccess the Internet through your local area network (LAN) u\ysing a wired or wireless 
connection\b
	
¦ Connecting	to	a	Wi\bed	Netwo\bk
You can attach your \yTV to your LAN usin\yg cable in three ways:
 
y You can attach your \yTV to your LAN by c\yonnecting the LAN \yport on the back o\y\f your TV to an ext\yernal modem using a C\yat 
5 cable\b See the dia\ygram below\b
 
y You can attach your \yTV to your LAN by c\yonnecting the LAN \yport on the back o\y\f your TV to a IP Sh\yarer which is connec\yted 
to an external modem\b Use Cat \y5 cable \for the con\ynection\b See the dia\ygram below\b
 
y Depending on how yo\yur network is confi\ygured, you may be able \yto attach your TV t\yo your LAN by conne\ycting the LAN 
port on the back o\y\f your TV directly to a network \ywall outlet using \ya Cat 5 cable\b See \ythe diagram below\b Note that the wal\yl 
outlet is attached \yto a modem or router elsewhere in your house\b
I\f you have a Dynami\yc Network, you shou\yld use an ADSL modem\y or router that support\ys Dynamic Host Confi\yguration 
Protocol (DHCP)\b Mode\yms and routers that suppor\yt DHCP automatical\yly provide the IP address, subnet mask, \ygateway, 
and DNS values your \yTV needs to access \ythe Internet so you don’t have to enter th\yem manually\b Most h\yome networks are 
Dynamic Networks\b
Some networks require a Static IP address\b I\f your network\y requires a Static IP address, you must enter\y the IP address, 
subnet mask, gatew\yay, and DNS values m\yanually on your TV’\ys Cable Setup Screen when you set up\y the network 
connection\b To get the IP address, subnet mask, \ygateway, and DNS val\yues, contact your I\ynternet Service Provider (ISP)\b I\f 
you have a Windows computer, you can also get \ythese values through your computer\b 
 
✎You can use ADSL modems that support DHCP i\f your network requires a Static IP address\b ADSL modems that 
support DHCP also let you use Static IP addresses\b
ANT  2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)
ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)
ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)
The Modem Port on the Wall TV Rear Panel
Modem Cable External Modem 
(ADSL / VDSL / Cabl\ye TV)
LAN Adapter
LAN CableANT  2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)
ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)
ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)
LAN Adapter
The Modem Port on the Wall
TV Rear Panel
Modem Cable LAN Cable
LAN Cable
ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)
ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)
ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT  2 IN(AIR/CABLE)
TV Rear Panel
LAN Cable
The Modem Port on the Wall External Modem
(ADSL / VDSL / Cabl\ye TV) IP Sharer
(having DHCP serve\yr)
LAN Adapter
[UC8790]BN68-02849D-01L04.indb   302010-04-01   오후 7:57:17Downloaded From TV-Manual.com ManualL