Samsung UE 40C8000 User Manual

							11English
02Connections
Changing the \fnput S\hource
Sou\bce	List
Use to select TV o\yr other external input 
sources such as DVD / \yBlu-ray players 
/ cable box / STB s\yatellite receiver 
connected to the TV\y\b 
 
■ TV	/	Ext.1	/	Ext.2	/	PC	/	AV	/	
Component	/	HDMI1/DVI	/	HDMI2	/	
HDMI3	/	HDMI4	/	USB
 
✎In the Sou\bce	List , connected 
inputs will be highlighted\b 
 
✎Ext.1,	Ext.2 and PC always stay activated\b
Edit	Name
 
■ VCR	/	DVD	/	Cable	STB	/	Satellite	STB	/	PVR	STB	/	
AV	Receive\b	/	Game	/	Camco\bde\b	/	PC	/	DVI	PC	/		
DVI	Devices	/	TV	/	IPTV	/	Blu\f\bay	/	HD	DVD	/	DMA: 
Name the device con\ynected to the input\y jacks to make 
your input source selection easie\yr\b
 
✎When a PC with a resolution o\f 1920 x 1080 @ 
60Hz is connected to the HDMI	IN	1(DVI) port, 
you should set to DVI	PC mode under Edit	Name \b
 
✎When connecting an HDMI/DVI cable to the  
HDMI	IN	1(DVI) port, you should set to DVI	PC or 
DVI	Devices mode under Edit	Name \b
CONNECTIONS	COMMON	INTERFACE	Slot
To watch paid channe\yls, the “CI or CI+\y CARD” must be ins\yerted\b  
y I\f you don’t insert the “CI o\yr CI+ CARD,” some \ychannels will 
display the message\y “Scrambled Signal”\b\y
 
y The pairing in\forma\ytion containing a \ytelephone number, the “CI or 
CI+ CARD” ID the H\yost ID and other in\y\formation will be d\yisplayed 
in about 2~3 minut\yes\b I\f an error message is displ\yayed, please 
contact your servic\ye provider\b
 
y When the configurat\yion o\f channel in\fo\yrmation has finishe\yd, the 
message “Updating C\yompleted” is displa\yyed, indicating the \y
channel list is up\ydated\b
 
✎NOTE
 
xYou must obtain a “CI or CI+ CARD” \from a local cable service provider\b 
 
xWhen removing the “CI or CI+ CARD”, care\fully pull it out with your hands since dropping the “CI or CI+ CARD” may 
cause damage to it\b
 
xInsert the “CI or CI+ CARD” in the direction marked on the card\b
 
xThe location o\f the COMMON	INTERFACE slot may be di\f\ferent depending on the model\b
 
x“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer\b
 
xI\f you have any problems, please contact a service provider\b
 
xInsert the “CI or CI+ CARD” that supports the current antenna settings\b The screen will be distorted or will not be 
seen\b
 
xWhen you are watching the satellite T V, remove the “CI or CI+ CARD” o\f terrestrial and cable\b The screen will be 
distorted or will not be seen\b
SOURCE
[UC8790]BN68-02849D-01L04.indb   112010-04-01   오후 7:56:59Downloaded From TV-Manual.com ManualL 
						

							12English
Basic Features
How to Navigate Me\hnus
Be\fore using the TV, \follow the steps \ybelow to learn how to 
navigate the menu \yand select and adjus\yt di\f\ferent \functions\b
POWERSOURCEON/OFF
INTERNET@TV
CONTENT
MEDIA.P
P.SI\fEADSUBT.
ABCD
3D
TTX/MIXPRE\bCH
GUIDE
CH LIST
MUTE
TOOLSINFO
RETURNEXIT
MENU
2
1
4
3
1	ENTERE / Direction button: Mov\ye the cursor and 
select an item\b Con\yfirm the setting\b
2	 RETURN button: Returns to the previous menu\b
3	 MENU button: Displays t\yhe main on-screen menu\b
4	 EXIT button: Exits the \yon-screen menu\b
How	to	Ope\bate	the	OSD	(On	Sc\been	Display)
The access step ma\yy di\f\fer depending on the\y selected menu\b
1MENU mThe main menu opti\yons appear on 
the screen:
Pictu\be,	Sound,	Channel,	Setup,	
Input,	Application,	Suppo\bt\b
2▲ / ▼ Select an icon with\y the ▲ or ▼ 
button\b
3ENTER EPress ENTERE to access the 
sub-menu\b
4▲ / ▼ Select the desired submenu with 
the ▲ or ▼ button\b
5◄ / ►Adjust the value o\f\y an item with the \y
◄ or ► button\b The adjust\yment in 
the OSD may di\f\fer depending on 
the selected menu\b
6ENTER EPress ENTERE to complete the 
configuration\b
7EXIT ePress EXIT\b
Using the \fNFO butt\hon (Now & Next gui\h\be)
The display identifie\ys the current channel 
and the status o\f c\yertain audio-video \y
settings\b
The Now & Next gui\yde shows daily TV 
programme in\formation\y \for each channel 
according to the broadcasting time\b
 
y Scroll ◄, ► to view in\formatio\yn \for a 
desired programme while watc\yhing the 
current channel\b 
 
y Scroll  ▲, ▼ to view in\formation \for other channels\b I\f you 
want to move to th\ye currently selected chan\ynel, press 
the ENTER
E button\b
Planning Your Viewing
Guide
The EPG (Electronic Programme Guide) 
in\formation is provided by broadcasters\b 
Using programme schedules p\yrovided 
by broadcasters, you can\y speci\fy 
programmes you want t\yo watch in 
advance so that the\y channel automatic\yally 
changes to the sel\yected programme 
channel at the spe\ycified time\b Programme 
entries may appear \yblank or out o\f dat\ye depending on a 
channel status\b 
Using	Channel	View
 
INFO
GUIDE
DTV  Air
15
DEF18:00  ~ 6:00  Life  On Venu\f  AvenueUnc\ba\f\fifie d
No  Detai\bd  Information E 
18:11 Thu 6 Jan
Watch
Information
 DTV Air 800 fiveHome and Awa\f
18:00 - 18:\b0
DramaDani is devastated\w when scott makes c\wlear his views on m\warriage...
 
 
 27
28
800
24
16
6 Discover\f
Discover\fH&
L
five
price-drop.tv
QVC
R4DTTAmerican Choppe rProgrammes resume \wat 06:00
Home and...
No Information
QVC Selection
No Information Tine Team
Fiv...
18:00 - 19:00
19:00 - 20:00)Famil\f Affairs)Dark Angel
800 ve
 View Mode    +24 Hours    Ch. Mode    Information  k Page E Watch
2:10 Tue 1 Jun
Guide
Channel View - TV
123456
       Today
[UC8790]BN68-02849D-01L04.indb   122010-04-01   오후 7:57:01Downloaded From TV-Manual.com ManualL 
						

							13English
03Basic	Featu\besUsing	Scheduled	View
1	
 Red (View	Mode): View the list o\f programmes that 
are playing now or co\yming up\b
2	
 Yellow (+24	Hou\bs): Viewing the list o\f \yprogrammes to 
be broadcasted a\fter 24 h\yours\b
3	
 Blue (Ch.	Mode): Select the type \yo\f channels you 
want to display on \ythe Channel	View window\b 
 
– The Ch.	Mode di\f\fers according to the antenna\y 
source\b 
4	 Info\bmation: Displays details \yo\f the selected 
programme\b
5	
k (Page): Move to next or \yprevious page\b
6	 ENTER
E button
 
– When selecting the\y current programme, you can 
watch the selected \yprogramme\b
 
– When selecting the\y \future programme, you can 
reserve to watch th\ye selected programme\b To cancel 
the schedule, press the ENTER
E button again and 
select Cancel	Schedules\b
Channel	Manage\b
Delete or set \favou\yrites channels and \yuse the programme 
guide \for digital br\yoadcasts\b Select a c\yhannel in the 
Channels,	My	Channels,	Satellite	or	Scheduled	screen\b
 
 
■	Channels: Shows the channel\y list according to 
channel type\b
 
■
*	My	Channels: Shows the group o\f the channel\b\y
 
■
	Satellite: Shows the channel\y list according to 
satellite signal\b
 
■
Scheduled: Shows all the cur\yrently reserved 
programmes\b
 
✎Using the colour buttons with the Channel	Manage\b
 
x Red ( Antenna ): Toggle among Ai\b,	Cable or 
Satellite \b
 
x Green ( Zoom): Enlarges or shrinks a channel 
number\b
 
x Yellow ( Select): Select desired channels and press 
the Yellow button to set all the selected channels at 
the same time\b The 
c mark appears to the le\ft o\f 
the selected channels\b
 
x Blue ( So\bt): Change the list ordered by channel 
name or channel number\b
 
xk ( Page ): Move to next or previous page\b
 
xT ( Tools ): Displays the Channel	Manage\b option 
menu\b (The options menus may di\f\fer depending on 
the situation\b)
Channel	Status	Display	Icons
Icons Ope\bations
AAn analogue channe\yl\b
cA channel selected\b\y
*A channel set as a\y Favourite\b
( A programme currently being broadcast\b
\A locked channel\b
)A reserved programme\b
Guide	Type	(Samsung	/	Guide	Plus+)
(depending on the c\yountry)
You can select a di\f\y\ferent type o\f Guide\b
 
■ Samsung: Uses the guide pr\yogramme by provided 
samsung\b
 
■ Guide	Plus+: Uses the guide pr\yogramme provided by 
Rovi International Solutions\b\y For more in\formation, re\fer 
to “www\beurope\bguideplus\bcom\b”
c 1   1futech
  2  * 24ore.tv
 15   abc1 
  3   BBC Worl\f
  23   bi\f-u\b.tv
  33   Boonerang
  32   Cartoon Nwk
  5   Class News
  4   Coming Soon
  27   Discover y
Satellite               Antenna   Zoom   Select   Sort   k Page  T Tools
Channels
All
TV
Radio
Data/Other
Free
Scrambled
Searched
 DTV Air 800 fiveFamily Affairs
18\f00 - 18\f30
DramaTanya \bonfesses all \1to a stunned Babs. \1Conrad is anxious to\1 hear...
 
 
 18\f30
19\f15)Family Affairs)Dark Ange l 800
800
five
five
800 ve
 View Mode   Information  E Cancel
2:10 Tue 1 Jun
Guide
Scheduled View
146
Today
Today
[UC8790]BN68-02849D-01L04.indb   132010-04-01   오후 7:57:02Downloaded From TV-Manual.com ManualL 
						

							14English
Basic Features
	
¦ Using	Favou\bite	Channels
*	My	Channels
(in Channel	Manage\b)
Shows all \favourite\y channels\b
 
■ Edit	My	Channels	
t: You can set the sel\yected 
channels to desired my channels group\b 
 
✎The “*” symbol will be displayed and the channel will 
be set as a my channel\b
1.	 Select a channel an\yd press the TOOLS button\b 
2.	 Add or delete a chan\ynel in the my chann\yel groups 
you want among 1, 2\y, 3 and 4\b
 
xOne or more groups can be selected\b
3.	 A\fter you have chan\yged the settings, t\yhe channel list 
\for each group can be viewed i\yn my channels\b
Channel	List
You can see all the\y channels searched\b
Channel Menu
	
¦ Retu\bning	Channels
Antenna	(Ai\b	/	Cable	/	Satellite)
Be\fore your television c\yan begin memorizin\yg the available 
channels, you must \yspeci\fy the type o\f \ysignal source that is 
connected to the TV\y (i\be\b an Ai\b,	Cable or Satellite system)\b
Count\by	
The PIN input screen appears\b Enter y\your 4 digit PIN num\yber\b 
 
■ Digital	Channel: Change the count\yry \for digital 
channels\b
 
■ Analogue	Channel: Change the count\yry \for analogue 
channels\b
Auto	Sto\be	
Scans \for a channel\y automatically and \ystores in the TV\b
 
✎Automatically allocated programme numbers may not 
correspond to actual or desired programme numbers\b I\f 
a channel is locked using the Child	Lock \function, the 
PIN input window appears\b
 
■ Antenna	Sou\bce	(Ai\b	/	Cable	/	Satellite)	
t: 
Select the antenna \ysource to memorise\b
When	Antenna	Sou\bce	is	set	to	Ai\b	o\b	Cable:  
■ Channel	Sou\bce	(Digital	&	Analogue	/	Digital	/	
Analogue): Select the channe\yl source to memorise\b
When selecting Cable → Digital	&	Analogue or Digital: 
Provide a value to sc\yan \for cable channe\yls\b
Sea\bch	Mode	(Full	/	Netwo\bk	/	Quick): Scans \for all 
channels with acti\yve broadcast stations an\yd stores them 
in the TV\b
 
✎I\f you select Quick , you can set up the Netwo\bk,	
Netwo\bk	ID,	F\bequency,	Modulation, and 
Symbol	Rate manually by press the button on the 
remote control\b
Netwo\bk	(Auto	/	Manual): Selects the Netwo\bk	ID 
setting mode among \yAuto or Manual\b
Netwo\bk	ID: When Netwo\bk is Manual, you can set up 
Netwo\bk	ID using the numeric\y buttons\b
F\bequency: Displays the \frequency \for the cha\ynnel\b 
(di\f\fers in each countr\yy)
Modulation: Displays availabl\ye modulation values\y\b
Symbol	Rate: Displays availabl\ye symbol rates\b
CH LIST
c  1   1futech
  2  * 24ore.tv
 15   abc1 
  3   BBC Worl\f
  23   bi\f-u\b.tv
  33   Boonerang
  32   Cartoon Nwk
  5   Class News
  4   Coming Soon
  27   Discover y
Satellite               Antenna   Zoom   Select   Sort   k Page  T Tools
Channels
All
TV
Radio
Data/Other
Free
Scrambled
Searched
Edit My Channels
Lock
Timer Recording
Timer Viewing
Edit Channel Number
Delete 
d
[UC8790]BN68-02849D-01L04.indb   142010-04-01   오후 7:57:03Downloaded From TV-Manual.com ManualL 
						

							15English
03Basic	Featu\besWhen	Antenna	Sou\bce	is	set	to	Satellite:
 
■ Channel	Type	(All	/	TV	/	Radio): Select the Channe\yl 
type to memorise\b
 
■ Satellite: Selects the satel\ylite to scan\b
 
■ Scan	Mode	(All	Channels	/	F\bee	Channels	Only): 
Selects the scannin\yg mode o\f the selec\yted satellite\b 
Manual	Sto\be	
Scans \for a channel\y manually and stores in the TV\b
 
✎I\f a channel is locked using the Child	Lock \function, 
the PIN input window appears\b
When	Antenna	Sou\bce	is	set	to	Ai\b	o\b	Cable:  
■ Digital	Channel: When scanning ha\ys finished, channels\y 
are updated in the ch\yannel list\b
 
✎When selecting Antenna → Ai\b:	Channel,	
F\bequency,	Bandwidth
 
✎When selecting Antenna → Cable:	F\bequency,	
Modulation,	Symbol	Rate
 
■ Analogue	Channel	(P\bog\bamme,	Colou\b	System,	
Sound	System,	Channel,	Sea\bch): I\f there is abnormal 
sound or no sound, \yreselect the sound s\ytandard 
required\b
 
✎Channel mode
 
xP (programme mode): When tuning is complete, 
the broadcasting stations in your area have been 
assigned to position numbers \from P0 to P99\b You 
can select a channel by entering the position number 
in this mode\b
 
xC (aerial channel mode) / S (cable channel mode): 
These two modes allow you to select a channel 
by entering the assigned number \for each aerial 
broadcasting station or cable channel\b
When	Antenna	Sou\bce	is	set	to	Satellite:  
■ Satellite: Selects the satel\ylite using the up/\ydown 
buttons\b
 
■ T\bansponde\b: Selects the trans\yponder using the up\y/
down buttons\b
 
■ Scan	Mode	(All	Channels	/	F\bee	Channels	Only): 
Selects either \free or all channels\y to store\b
 
■ Netwo\bk	Sea\bch	(Disable	/	Enable): Enable / Disable \y
network search using the up/dow\yn buttons\b
 
■ Signal	Quality: Display the current status o\f 
broadcasting signal\b
 
✎In\formation on a satellite and its transponder is subject 
to change depending on the broadcasting conditions\b
 
✎When setting is completed, move to Sea\bch and press 
the ENTERE button\b Channel scan is started\b
Satellite	System	Setup
The PIN input screen appears\b Enter y\your 4 digit PIN num\yber\b 
Satellite	System	Setup is available when\y Antenna is set to 
Satellite\b Be\fore runZning Auto	Sto\be, set 
Satellite	System	Setup\b Then channel scan\y is run normally\b
 
■ Satellite	Selection: You can choose the \ysatellites \for 
this TV\b
 
■ LNB	Powe\b	(Off	/	On): Enables or disable\ys the power 
supply \for the LNB\b
 
■ LNB	Settings: Configures the outdoor equi\ypment\b
 
■ Satellite: Selects the satel\ylite \for receiving digital 
broadcasts\b
T\bansponde\b: Selects a transpo\ynder \from the list or 
adds a new transpon\yder\b
DiSEqC	Mode: Selects DiSEqC mode\y \for the selected 
LNB\b
Lowe\b	LNB	Oscillato\bs: Sets the LNB osci\yllators to a 
lower \frequency\b
Uppe\b	LNB	Oscillato\bs: Sets the LNB osci\yllators to a 
higher \frequency\b
Tone	22	kHz	(Off	/	On	/	Auto): Selects the Tone 22 
kHz depending on th\ye LNB type\b For a u\yniversal LNB it 
should be Auto\b
Signal	Quality: Display the current status o\f 
broadcasting signal\b
 
■ Positione\b	Settings: Configures the antenna pos\yitioner\b
Positione\b	(On	/	Off): Enables or disable\ys the positioned 
control\b
Positione\b	Type	(USALS	/	DiSEqC	1.2): Sets 
the positioned type\y between DiSEqC 1\b2 \yand 
USALS(Universal Sate\yllite Automatic Lo\ycation System)\b
 
– My	Longitude: Sets the longitud\ye \for my location\b
 
– My	Latitude: Sets the latitude\y \for my location\b
 
– Satellite	Longitude	Settings: Sets the longitud\ye o\f 
user defined satelli\ytes\b
Use\b	Mode: Sets the position\y o\f satellite anten\yna 
according to each satell\yite\b I\f you store the current 
position o\f satelli\yte antenna according to a certain 
satellite, when th\ye signal o\f that sa\ytellite is needed, \y
the satellite ante\ynna can be moved to\y pre-populated 
position\b  
– Satellite: Selects the satel\ylite to set the po\ysition \for\b 
 
– T\bansponde\b: Selects a transpo\ynder \from the list \for 
signal reception\b 
 
– Moving	Mode: Selects the movem\yent mode between 
discrete and continuous \ymovement\b 
 
– Step	Size: Adjusts the step \ysize degrees \for the 
antenna rotation\b Step Size i\ys available when M\yoving 
Mode is set to Step\y\b 
[UC8790]BN68-02849D-01L04.indb   152010-04-01   오후 7:57:04Downloaded From TV-Manual.com ManualL 
						

							16English
Basic Features
 
– Go	to	Sto\bed	Position: Rotates the ante\ynna to the 
stored satellite positi\yon\b 
 
– Antenna	Position: Adjusts and stores the antenna 
position \for the se\ylected satellite\b 
 
– Sto\be	Cu\b\bent	Position: Stores current position as 
the selected positi\yoner limit\b 
 
– Signal	Quality: Display the current status o\f 
broadcasting signal\b
Installe\b	Mode: Sets limits to th\ye scope o\f movement\y 
o\f satellite antenn\ya or reset the position\b \yGenerally, 
installation guide \yuses this \function\b\y  
– Limit	Position	(East	/	West): Selects the direction o\f 
the positioner Lim\yit\b 
 
– Antenna	Position: Adjusts and stores the antenna 
position \for the se\ylected satellite\b 
 
– Sto\be	Cu\b\bent	Position: Stores the current position 
as the selected pos\yitioner Limit\b 
 
– Go	to	Ze\bo: Moves the antenn\ya to the re\ference 
position\b 
 
– Reset	Positione\b	Limit: Allows the anten\yna to rotate 
over the \full arc\b
 
■ Reset	All	Setting	(OK	/	Cancel): All satellite se\yttings will 
be reset to the initia\yl values\b
	
¦ Editing	Channels
Channel	Manage\b	Option	Menu	
(in Channel	Manage\b)
1.	 Select a channel an\yd press the TOOLS button\b 
2.	 Edit the channel nam\ye or number using \ythe 
Edit	Channel	Name or Edit	Channel	Numbe\b menu\b
 
■ Edit	Channel	Name (analogue channel\ys only): Assign 
your own channel na\yme\b 
 
■ Edit	Channel	Numbe\b (digital channels \yonly): Edit the 
number by pressing the number \ybuttons desired\b
	
¦ Othe\b	Featu\bes
Cable	Sea\bch	Option
(depending on the c\yountry) 
Sets additional sear\ych options such as\y the \frequency and 
symbol rate \for a c\yable network search\b
 
■ F\beq.Sta\bt	/	F\beq.Stop: Set the start or \ystop \frequency 
(di\f\fers in each countr\yy) 
 
■ Symbol	Rate: Displays availabl\ye symbol rates\b 
 
■ Modulation: Displays availabl\ye modulation values\y\b
Channel	Manage\b
Channel	Manage\b	Option	Menu	
Set each channel us\ying the Channel	Manage\b menu options 
(Lock	/	Unlock,	Time\b	Reco\bding,	Time\b	Viewing,	So\bt,	
Reo\bde\b,	Delete,	Select	All	/	Deselect	All)\b Option menu 
items may di\f\fer depending on the\y channel status\b
1.	Select a channel an\yd press the TOOLS button\b 
2.	 Select a \function a\ynd change its setti\yngs\b
 
■ Lock	/	Unlock: Lock a channel s\yo that the channel\y 
cannot be selected \yand viewed\b
 
✎NOTE
 
xThis \function is available only when the  
Child	Lock is set to On \b
 
xThe PIN input screen appears\b Enter your 
4-digit PIN, the de\fault o\f which is “0-0-0-0”\b 
Change the PIN using the Change	PIN option\b
 
■ Time\b	Reco\bding (digital channels \yonly): Allows you t\yo 
record a programme currently being broadcasted or 
make a reservation to record a programme scheduled 
\for broadcast\b
 
✎A USB device with 4GB o\f memory or greater 
must be connected to the T V\b
 
✎A USB storage device cannot record until it 
completes the Device Per\formance Test\b
 
✎In case o\f USB-HDD,\y over 5400rpm
 
✎In case o\f USB Stick\y, USB 2\b0 and SLC Type\b 
(Minimum size o\f US\yB Stick is 2GB\b)
 
■ Time\b	Viewing: You can set a desired channel to be 
displayed automatica\ylly at the reserved time\b Set th\ye 
current time first to u\yse this \function\b 
 
✎When a digital channel is selected in  
Channel	Manage\b , press the ► button to view 
the digital Programme\b
 
■ So\bt (analogue channel\ys only): This opera\ytion allows 
you to change the p\yrogramme numbers o\f \ythe stored 
channels\b This oper\yation may be necess\yary a\fter using 
the auto store\b 
 
■ Reo\bde\b (when the Antenna\y was set to Satelli\yte): 
Rearrange the chan\ynel manager in num\yerical order\b 
 
■ Delete: You can delete a cha\ynnel to display the\y channels 
you want\b
 
■ Select	All	/	Deselect	All: Select all the ch\yannels 
or deselect all the\y selected channels \yin the channel 
manager\b
[UC8790]BN68-02849D-01L04.indb   162010-04-01   오후 7:57:04Downloaded From TV-Manual.com ManualL 
						

							17English
03Basic	Featu\bes
Scheduled	
(in Channel	Manage\b)
You can view, modi\fy or delete a\y show you have reserved to 
watch\b
 
■ Change	Info: Change a show you\y have reserved to 
watch\b
 
■ Cancel	Schedules: Cancel a show you\y have reserved 
to watch\b
 
■ Info\bmation: Display a show yo\yu have reserved 
to watch\b (You can also change\y the reservation 
in\formation\b)
 
■ Select	All	/	Deselect	All: Select or deselec\yt all reserved 
programmes\b
Channel	List	T\bansfe\b
The PIN input screen appears\b Enter y\your 4 digit PIN num\yber\b 
Imports or exports\y the channel map\b Y\you should connect a\y 
USB storage to use \ythis \function\b
 
■ Impo\bt	f\bom	USB: Import channel l\yist \from USB\b
 
■ Expo\bt	to	USB: Export channel li\yst to USB\b this \func\ytion 
is available when \yUSB is connected\b
Fine	Tune	
(analogue channels\y only)
I\f the signal is we\yak or distorted, fin\ye tune the channel\y 
manually\b 
 
✎Fine tuned channels are marked with an asterisk “*”\b 
 
✎To reset the \fine-tuning, select Reset \b
Picture Menu
	
¦ Changing	the	P\beset	Pictu\be	Mode
Mode	t
Select your pre\ferred picture type\b 
 
■ Dynamic: Suitable \for a br\yight room\b 
 
■ Standa\bd: Suitable \for a no\yrmal environment\b 
 
■ Natu\bal: Suitable \for reducing eye strain\b \y
 
✎Natu\bal is not available in PC mode\b 
 
■ Movie: Suitable \for watc\yhing movies in a da\yrk room\b 
	
¦ Adjusting	Pictu\be	Settings
Backlight	/	Cont\bast	/	B\bightness	/	
Sha\bpness	/	Colou\b	/	Tint	(G/R)	
Your television has\y several setting o\yptions \for picture quality 
control\b
 
✎NOTE
 
xIn analogue T V,	Ext.,	AV modes o\f the PAL system, 
the Tint	(G/R) \function is not available\b
 
xIn PC mode, you can only make changes to 
Backlight,	Cont\bast and B\bightness \b
 
xSettings can be adjusted and stored \for each 
external device connected to the T V\b
	
¦ Economical	Solutions
Eco	Solution
 
■ Ene\bgy	Saving	(Off	/	Low	/	Medium	/	High	/		
Pictu\be	Off	/	Auto)	t: Adjust the bright\yness 
o\f the TV in order to reduce power consump\ytion\b I\f you 
select Pictu\be	Off, the screen is turned o\f\f, but the 
sound remains on\b Press any button exce\ypt volume 
button to turn on the screen\b 
 
■ Eco	Senso\b	(Off	/	On): To enhance your powe\yr savings; 
the picture settings will au\ytomatically adapt t\yo the light 
in the room\b
 
✎I\f you adjust the Backlight , the Eco	Senso\b will 
be set to Off \b
Min	Backlight: When Eco	senso\b is On, the minimum 
screen brightness can\y be adjusted manual\yly\b
 
✎I\f Eco	Senso\b is On , the display brightness 
may change (become slightly darker or brighter) 
depending on the surrounding light intensity\b
 
■ No\fSignal	Powe\b	Off	(Off	/	15	min	/	30	min	/	60	min): 
To avoid unnecessary\y energy consumption\y, set how long 
you want the TV to \yremain on i\f it’s not receiving a signal\b
 
✎Disabled when the PC is in power saving mode\b
[UC8790]BN68-02849D-01L04.indb   172010-04-01   오후 7:57:05Downloaded From TV-Manual.com ManualL 
						

							18English
Basic Features
	
¦ Changing	the	Pictu\be	Options
Advanced	Settings
(available in Standa\bd	/	Movie mode)
You can adjust the d\yetailed setting \for\y the screen including 
colour and contrast\y\b
 
✎In PC mode, you can only make changes to 
Dynamic	Cont\bast,	Gamma,	White	Balance and 
LED	Motion	Plus \b
 
■ Black	Tone	(Off	/	Da\bk	/	Da\bke\b	/	Da\bkest): Select the 
black level to adju\yst the screen depth\b 
 
■ Dynamic	Cont\bast	(Off	/	Low	/	Medium	/	High): Adjust 
the screen contrast\b 
 
■ Gamma: Adjust the primar\yy colour intensity\b
 
■ Expe\bt	Patte\bn	(Off	/	Patte\bn1	/	Patte\bn2): By running 
the Expe\bt	Patte\bn \function, the pict\yure can be 
calibrated without \ya generator or filt\yer\b I\f the OSD menu 
disappears or a men\yu other than the P\yicture menu is 
opened, the calibra\ytion is saved and t\yhe Expe\bt	Patte\bn 
window disappears\b
 
✎While the Expe\bt	Patte\bn is running, sound is not 
outputted\b
 
✎Only enabled in DT V, Component and HDMI 
modes\b
 
■ RGB	Only	Mode	(Off	/	Red	/	G\been	/	Blue): You can 
adjust Colou\b or Tint	(G/R) o\f Red,	G\been or Blue \for 
the picture \from an external device (DVD pla\yyer, home 
theatre, etc\b)\b   
■ Colou\b	Space	(Auto	/	Native	/	Custom): Adjust the 
range o\f colours av\yailable to create the image\b To adjust 
Colou\b,	Red,	G\been,	Blue and Reset, set 
Colou\b	Space to Custom\b 
 
■ White	Balance: Adjust the colour\y temperature \for a 
more natural picture\b 
R\fOffset	/	G\fOffset	/	B\fOffset: Adjust each colou\yr’s 
(red, green, blue) darkness\y\b 
R\fGain	/	G\fGain	/	B\fGain	: Adjust each colou\yr’s (red, 
green, blue) brightn\yess\b 
Reset: Resets the White	Balance to it’s de\fault settings\b \y
 
■ 10p	White	Balance	(Off	/	On): Controls the white 
balance in 10 poin\yt interval by adjus\yting the red, green, 
and blue brightness\y\b
 
✎Available when the picture mode is set to Movie 
and when the external input is set to HDMI or 
Component\b 
 
✎Some external devices may not support this 
\function\b
Inte\bval: Select interval t\yo adjust\b 
Red: Adjust the red level\b 
G\been: Adjust the green level\b 
Blue: Adjust the blue l\yevel\b 
Reset: Resets the 10p	White	Balance to its de\fault 
settings\b 
 
■ Flesh	Tone: Emphasize pink “F\ylesh Tone\b” 
 
■ Edge	Enhancement	(Off	/	On): Emphasize object \y
boundaries\b 
 
■ xvYCC	(Off	/	On): Setting the xvYCC mode on 
increases detail and colour space when watching movies 
\from an external device (e\bg\b DVD\y player) connected \yto 
the HDMI or Compon\yent IN jacks\b 
 
✎Available when the picture mode is set to Movie 
and when the external input is set to HDMI or 
Component\b
 
✎Some external devices may not support this 
\function\b
 
■ LED	Motion	Plus	(Off	/	No\bmal	/	Cinema	/	Ticke\b): 
Removes drag \from \fast scenes with\y a lot o\f movement \y
to provide a clear pictu\yre\b
Advanced Settings
Black Tone   : Off  ►
Dynamic Contrast  : Medium
Gamma  : 0
Expert Pattern   : Off
RGB Only Mode  : Off
Colour Space  : Native
White Balance
                                            ▼
U Move  E Enter  R Return
[UC8790]BN68-02849D-01L04.indb   182010-04-01   오후 7:57:06Downloaded From TV-Manual.com ManualL 
						

							19English
03Basic	Featu\besPictu\be	Options
 
✎In PC mode, you can only make changes to the  
Colou\b	Tone,	Size and Auto	P\botection	Time \b
 
■ Colou\b	Tone	(Cool	/	No\bmal	/	Wa\bm1	/	Wa\bm2)
 
✎Wa\bm1 or Wa\bm2 will be deactivated when the 
picture mode is Dynamic \b
 
✎Settings can be adjusted and stored \for each 
external device connected to an input on the T V\b
 
■ Size	: Your cable box/sate\yllite receiver 
may have its own se\yt o\f screen sizes as 
well\b However, we highly recommend you 
use 16:9 mode most \yo\f the time\b
Auto	Wide: Automatically adj\yusts the 
picture size to the 16:9\y aspect ratio\b 
16:9 : Adjusts the pict\yure size to 16:9 \for \y
DVDs or wide broadcasting\b 
Wide	Zoom: Magnifies the pic\yture size more than 4:3\b 
 
✎Adjusts the Position by using ▲ , ▼ buttons\b 
Zoom: Magnifies the 16:\y9 wide pictures vertically to fit\y 
the screen size\b 
 
✎Adjusts the Position or Size by using ▲ , ▼ 
button\b 
4:3 : The de\fault sett\ying \for a movie or \ynormal 
broadcasting\b
 
✎Do not watch in 4:3 \format \for a long time\b Traces 
o\f borders displayed on the le\ft, right and centre 
o\f the screen may cause image retention(screen 
burn) which are not covered by the warranty\b Sc\been	Fit: Displays the \full\y image without any \ycut-o\f\f 
when HDMI (720p / \y1080i / 1080p) or \yComponent 
(1080i / 1080p) si\ygnals are inputted\b
 
✎NOTE
 
xWhen Double (À, Œ) mode has been set in PIP, 
the Picture Size cannot be set\b 
 
xDepending on the input source, the picture size 
options may vary\b 
 
xThe available items may di\f\fer depending on the 
selected mode\b 
 
xIn PC mode, only 16:9 and 4:3 modes can be 
adjusted\b 
 
xSettings can be adjusted and stored \for each 
external device connected to an input o\f the T V\b 
 
xA\fter selecting Sc\been	Fit in HDMI (1080i / 1080p) 
or Component (1080i / 1080p) mode: Adjusts the 
Position or Size by using ▲ , ▼, ◄ , ► button\b 
 
xI\f you use the Sc\been	Fit \function with HDMI 720p 
input, 1 line will be cut at the top, bottom, le\ft and 
right as in the overscan \function\b
 
■ Sc\been	Mode	(16:9	/	Wide	Zoom	/	Zoom	/	4:3): 
Available only when \ypicture size is set to Auto	Wide\b You 
can determine the d\yesired picture size at the 4:3 \yWSS 
(Wide Screen Service) size o\yr the original siz\ye\b Each 
European country requires di\f\ferent picture size\b
 
✎Not available in PC, Component or HDMI mode\b
 
■ Digital	Noise	Filte\b	(Off	/	Low	/	Medium	/	High	/	Auto	
/	Auto	Visualisation): When the broadcast signal is 
weak, some static \yand ghosting may ap\ypear\b Select one 
o\f the options unti\yl the best picture is displayed\b 
Auto	Visualisation: When changing an\yalogue channels, 
displays the intens\yity o\f the current signal and defin\yes 
the screen noise filter\b
 
✎Only available \for analogue channels\b
 
■ MPEG	Noise	Filte\b	(Off	/	Low	/	Medium	/	High	/	
Auto): Reduces MPEG noise\y to provide improved 
picture quality\b 
 
■ HDMI	Black	Level	(No\bmal	/	Low): Selects the black\y 
level on the screen to adjust the s\ycreen depth\b
 
✎Available only in HDMI mode (RGB signals)\b
 
■ Film	Mode	(Off	/	Auto1	/	Auto2): Sets the TV to 
automatically sense\y and process film signals \y\from all 
sources and adjust the \ypicture \for optimum quali\yty\b
 
✎Available in T V, AV, COMPONENT (480i / 1080i) 
and HDMI (480i / 1080i)\b
P.SIZE
Picture Options
Colour Tone  : Normal   ►
Size  : Auto Wide
Screen Mode  : 16:9
Digital Noise Filter  : Auto
MPEG Noise Filter   : Auto
HDMI Black Level  : Normal
Film Mode  : Off
                                            ▼
U Move  E Enter  R Return
[UC8790]BN68-02849D-01L04.indb   192010-04-01   오후 7:57:06Downloaded From TV-Manual.com ManualL 
						

							20English
Basic Features
 
■ Motion	Plus	(Off	/	Clea\b	/	Standa\bd	/	Smooth	/	
Custom	/	Demo): Removes drag \from \fast scenes with\y 
a lot o\f movement t\yo provide a clearer picture\b
 
✎I\f noise occurs on the screen, please set up the 
Motion	Plus to Off \b I\f Motion	Plus is Custom , 
you can set up the Blu\b	Reduction,	Judde\b	
Reduction or Reset manually\b 
 
✎I\f Motion	Plus is Demo , you can compare the 
di\f\ference o\f on and o\f\f modes\b
Blu\b	Reduction: Adjusts the blur \yreduction level \from 
video sources\b 
Judde\b	Reduction: Adjusts the judder\y reduction level 
\from video sources when playing fil\yms\b 
Reset: Reset the custom\y settings\b
 
■ Auto	P\botection	Time	(2	hou\bs	/	4	hou\bs	/	8	hou\bs	
/	10	hou\bs	/	Off): I\f the screen remains idle with a \ystill 
image \for a certain\y period o\f time defin\yed by the user, 
the screen saver is activ\yated to prevent the \formation\y o\f 
ghost images on th\ye screen\b
 
■ Sma\bt	LED	(Off	/	Low	/	Standa\bd	/	High	/	Demo): 
Controls LED backlight t\yo maximize picture clarity\b 
Demo: Displays the di\f\ference between Sma\bt	LED on 
and o\f\f modes\b
	
¦ Viewing	TV	using	the	3D	function
IMPORTANT	SAFETY	INFORMATION.	READ	THE	
FOLLOWING	WARNINGS	BEFORE	YOU	OR	YOUR	
CHILD	USE	THE	3D	FUNCTION
	
[WARNING
 
xAs the TV turns on, the le\ft and\y right sides o\f 3D \y
pictures may overlap more than usual\b It ma\yy take 
time until the pic\yture quality is optimi\yzed\b
 
xThe 3D e\f\fect may be experie\ynced di\f\ferently 
depending on the vi\yewer\b You may not notice t\yhe 3D 
e\f\fect at all i\f you h\yave a prescription \for one \yeye that 
is very di\f\ferent \from the other eye\b
 
x	 Parents’ care\ful supervision is required particularly 
when children or teenagers view 3D images\b 
 
xPhotosensitive Seizure Warning and Other Health 
Risks
 
– Some viewers may ex\yperience an epilep\ytic seizure 
or stroke when exposed to\y certain flashing i\ymages 
or lights containe\yd in certain televi\ysion pictures or 
video games\b I\f you \yor any o\f your relatives has a 
history o\f epilepsy \yor strokes, please consu\ylt with a 
medical specialist \ybe\fore using the 3D \func\ytion\b 
 
– Even those without \ya personal or \famil\yy history 
o\f epilepsy or stroke may have an und\yiagnosed 
condition that can \ycause “photosensit\yive epileptic 
seizures\b”
 
– Do not watch 3D pi\yctures when you \feel 
incoherent, sleepy, tired or sick\b Avoid watching 3D 
pictures \for long hours\b  
– I\f you experience a\yny o\f the \following \ysymptoms 
immediately stop wa\ytching 3D pictures and 
consult a medical s\ypecialist: (1)	alte\bed	vision;	(2)	
lightheadedness;	(3)	dizziness;	(4)	involunta\by	
movements	such	as	eye	o\b	muscle	twitching;	
(5)	confusion;	(6)	nausea;	(7)	loss	of	awa\beness;	
(8)	convulsions;	(9)	c\bamps;	and/o\b	(10)	
diso\bientation. Parents should monitor\y and ask 
their children about the above\y symptoms-children 
and teenagers may b\ye more likely than adult\ys to 
experience these s\yymptoms\b
 
xNote that watching T V while sitting too close to the 
screen \for an extended period o\f time may weaken 
your eyesight\b 
 
xNote that watching T V while wearing 3D Active 
Glasses \for an extended period o\f time may cause a 
headache or \fatigue\b I\f you \feel headache, \fatigue or 
dizziness, stop watching T V and rest\b
 
x  Some 3D pictures may startle viewers\b The pregnant, 
elderly, epileptic and those su\f\fering \from serious 
physical conditions are advised to avoid utilizing the 
unit’s 3D \functionality\b
 
xWe don’t recommend 3D pictures to those who are 
in bad physical condition, who are sleep-deprived or 
who drank liquor\b
 
xPlease take care to be aware o\f the world around 
you\b This product is designed to be immersive\b DO 
NOT use this product near open stairwells, cables, 
balconies, or other objects that can be tripped over, 
run into, knocked down, broken or \fallen over\b Being 
startled or deluding yoursel\f into thinking that the 3D 
images are real may cause you to crush a nearby 
object or get injured trying to move your body\b
 
x  Do not use the 3D Active Glasses \for any other 
purpose than \for which it was designed\b Wearing the 
with an HDMI/DVI \for any other purpose (as general 
spectacles, sunglasses, protective goggles, etc\b) 
may physically harm you or weaken your eyesight\b 
 
xImmersive video can potentially have adverse e\f\fects 
on the user including motion sickness, perceptual 
a\fter e\f\fects, disorientation, eye strain, and 
decreased postural stability\b Take \frequent breaks to 
lessen the potential o\f these e\f\fects, as is commonly 
suggested \for other items, such as keyboards and 
computer monitors, that you may tend to \fixate or 
concentrate on\b I\f your eyes show signs o\f \fatigue or 
dryness or i\f you have any o\f the above symptoms, 
immediately discontinue use o\f this device and do 
not resume using it \for at least thirty minutes a\fter 
the symptoms have subsided\b
 
xThe ideal viewing distance should be three times 
or more the height o\f the screen\b We recommend 
sitting with viewer’s eyes on a level with the screen\b
[UC8790]BN68-02849D-01L04.indb   202010-04-01   오후 7:57:07Downloaded From TV-Manual.com ManualL