Ricoh Mp C5503 User Guide

							ARDF
One-pass duplex scanning ADF
1. Sensors
1. Adjust the original guide to the original size.
2. Place the aligned originals squarely face up in the ADF.
Do not stack originals beyond the limit mark.
The first page should be on the top. • ARDF
• One-pass duplex scanning ADF
Placing Originals
61CSN003
1 1
CVA056 CSN004
1
22   
						

							1. Limit mark
2. Original guide
2. Getting Started
621
2
CVA057   
						

							3. Copy
This chapter describes frequently used copier functions and operations. For the information not included
in this chapter, see Copy/ Document Server
 on the supplied CD-ROM.
Basic Procedure
To make copies of originals, place them on the exposure glass or in the ADF.
When placing the original on the exposure glass, start with the first page to be copied. When placing
the original in the ADF, place them so that the first page is on the top.
For details about how to place the original on the exposure glass, see page 60 "Placing Originals on
the Exposure Glass".
For details about how to place the original in the ADF, see page 60 "Placing Originals in the Auto
Document Feeder".
To copy onto paper other than plain paper, specify the paper type in User Tools according to the weight
of the paper you are using. For details, see "Tray Paper Settings", Connecting the Machine/ System
Settings
.
1. Press the [Home] key on the top left of the control panel, and press the [Copier] icon on
the [Home] screen.
2. Make sure that no previous settings remain.
When there are previous settings remaining, press the [Reset] key.
3. Place the originals.
4. Make desired settings.
5. Enter the number of copies with the number keys.
The maximum copy quantity that can be entered is 999.
63  CJS113   
						

							6.Press the [Start] key.
When placing the original on the exposure glass, press the [
] key after all originals are scanned.
Some functions such as Batch mode may require that you press the [
] key when placing originals
in the ADF. Follow the messages that appear on screen.
7. When the copy job is finished, press the [Reset] key to clear the settings.
3. Copy
64    
						

							Auto Reduce / Enlarge
The machine automatically detects the original size and then selects an appropriate reproduction ratio
based on the paper size you select.
• If you select a reproduction ratio after pressing [Auto Reduce / Enlarge], [Auto Reduce / Enlarge] is canceled and the image cannot be rotated automatically.
This is useful to copy different size originals to the same size paper. If the orientation in which your original is placed is different from that of the paper you are copying onto,
the machine rotates the original image by 90 degrees and fits it on the copy paper (Rotate Copy). For
example, to reduce A3 (11 × 17)
 originals to fit onto A4 (8 1
/ 2 × 11) paper, select a paper tray
containing A4 (8 1
/ 2 × 11)
 paper, and then press [Auto Reduce / Enlarge]. The image is
automatically rotated. For details about Rotate Copy, see "Rotate Copy", Copy/ Document Server
.
The original sizes and orientations you can use with this function are as follows:
(mainly Europe and Asia)
Original locationOriginal size and orientationExposure glassA3, B4 JIS, A4, B5 JIS, A5, 8 1
/ 2 × 13ADFA3, B4 JIS, A4, B5 JIS, A5, B6 JIS, 11
× 17
, 8 1
/ 2 × 11, 8 1
/ 2 × 13
(mainly North America)
Original locationOriginal size and orientationExposure glass11 × 17, 8 1
/ 2 × 14, 8 1
/ 2 × 11, 5 1
/ 2 × 8 1
/ 2ADF11 × 17, 8 1
/ 2 × 14, 8 1
/ 2 × 11, 5 1
/ 2 × 8 1
/ 2
, 10 × 14, 7 1
/ 4 × 10 1
/ 2, A3, A4
Auto Reduce / Enlarge
65CKN008                                                
						

							1.Press [Auto Reduce / Enlarge].
2.Select the paper size.
3. Place the originals, and then press the [Start] key.
3. Copy
66  
						

							Duplex Copying
Copies two 1-sided pages or one 2-sided page onto a 2-sided page. During copying, the image is
shifted to allow for the binding margin.
There are two types of Duplex.
1 Sided 
 2 Sided
Copies two 1-sided pages on one 2-sided page.
2 Sided 
 2 Sided
Copies one 2-sided page on one 2-sided page.
The resulting copy image will differ according to the orientation in which you place your originals (
 or
).
Original orientation and completed copies
To copy on both sides of the paper, select the original and copy orientation according to how you
want the printout to appear.
OriginalPlacing originalsOriginal
OrientationOrientationCopy
Top to TopTop to Bottom
Duplex Copying
67CKN009             
						

							OriginalPlacing originalsOriginal
OrientationOrientationCopyTop to TopTop to Bottom
1. Press [Dup./Combine/Series].
2.Make sure that [Duplex] is selected. If [Duplex] is not selected, press [Duplex].
3. Select [1 Sided 
 2 Sided] or [2 Sided  2 Sided] according to how you want the
document to be output.
To change the original or copy orientation, press [Orientation].
4. Press [OK].
5. Place the originals.
6. Press [Special Original].
3. Copy
68          
						

							7.Select the original orientation, and then press [OK].
8.Press the [Start] key.
Specifying the Original and Copy Orientation
Select the orientation of the originals and copies if the original is two-sided or if you want to copy onto both sides of the paper.
• Top to Top
• Top to Bottom
1. Press [Orientation].
Duplex Copying
69CKN011 CKN012   
						

							2.Select [Top to Top] or [Top to Bottom] for [Original:] if the original is two-sided.
3.Select [Top to Top] or [Top to Bottom] for [Copy:].
4. Press [OK].
3. Copy
70