Panasonic Kx Tva50 Installation Manual

							2.Insert and tighten the screws as shown.
Note
•The KX-TVA502 operates at SELV.
Document Version  3.0  2010/06Installation Manual512.7.1 2-Port Hybrid Expansion Card (KX-TVA502)Screw  
						

							2.7.2  2-Port Digital Expansion Card (KX-TVA503)Each KX-TVA503 adds 2 ports to the VPS which can be used for DPT Integration. KX-TVA503 cards can be
installed in slots 2 and 3 of the VPS.
Integration Type
Basic ConfigurationMaximum Configuration
KX-TVA503  ´ 2No. of JacksNo. of PortsNo. of JacksNo. of PortsDPT Integration123 (1 per card)6
Included Items
Screw  ´ 2
Installation 1.Position the front of the card so that the jacks fit in the open slot. Holding the card firmly in place, lower the
other end of the card so that the card’s hole fits over the extension bolt.
CAUTION
When installing optional cards, do not put pressure on the main board. Doing so may result in damage
to the VPS.
52Installation ManualDocument Version  3.0  2010/062.7.2 2-Port Digital Expansion Card (KX-TVA503)2
1
Extension Bolt  
						

							2.Insert and tighten the screws as shown.
Note
•The KX-TVA503 operates at SELV.
Document Version  3.0  2010/06Installation Manual532.7.2 2-Port Digital Expansion Card (KX-TVA503)Screw  
						

							2.7.3  Memory Expansion Card (KX-TVA524)The KX-TVA524 adds an additional 4 hours of recording time to the VPS.
Included Items
None
Installation 1.Insert the card between the guide rails and slide it down as shown.
2. Secure the latch by flipping it toward the center of the card and slightly pressing down on it.
CAUTION
When installing optional cards, do not put pressure on the main board. Doing so may result in damage to
the VPS.
54Installation ManualDocument Version  3.0  2010/062.7.3 Memory Expansion Card (KX-TVA524)  
						

							2.7.4  LAN Interface Card (KX-TVA594)The KX-TVA594  allows the VPS to be accessed over a local area network (LAN) for administration purposes.
Included Items
Screw  ´ 1
Installation 1.Insert the card between the guide rails and slide it down as shown.
2. Secure the latch by flipping it toward the center of the card and slightly pressing down on it.
CAUTION
When installing optional cards, do not put pressure on the main board. Doing so may result in damage
to the VPS.
Document Version  3.0  2010/06Installation Manual552.7.4 LAN Interface Card (KX-TVA594)  
						

							3.Insert and tighten the screw as shown.56Installation ManualDocument Version  3.0  2010/062.7.4 LAN Interface Card (KX-TVA594)Screw  
						

							2.7.5  Modem Card (KX-TVA296)The KX-TVA296 allows the VPS to be accessed remotely for administration purposes.
Included Items
Screw  ´ 1
Installation 1.Insert the card between the guide rails and slide it down as shown.
2. Secure the latch by flipping it toward the center of the card and slightly pressing down on it.
CAUTION
When installing optional cards, do not put pressure on the main board. Doing so may result in damage
to the VPS.
Document Version  3.0  2010/06Installation Manual572.7.5 Modem Card (KX-TVA296)  
						

							3.Insert and tighten the screw as shown.
Note
•The KX-TVA296 operates at TNV.
58Installation ManualDocument Version  3.0  2010/062.7.5 Modem Card (KX-TVA296)Screw  
						

							2.8  Installing Optional Cards—KX-TVA200The KX-TVA200 can be expanded by installing the following optional cards.ModelModel NameMaximum QuantityKX-TVA2044-Port Digital Expansion Card6KX-TVA296Modem Card1
CAUTIONBefore installing optional cards, it is very important that the power to the unit be turned off. Before
touching the optional cards or any components within the unit, discharge any static electricity from
your body by touching the ground terminal (if it is connected to ground) or by using a grounding
strap (user-supplied). This is a critical step that must be performed to protect the circuit board and
other components from damage caused by static electricity.
Document Version  3.0  2010/06Installation Manual592.8 Installing Optional Cards—KX-TVA200 
						

							2.8.1  4-Port Digital Expansion Card (KX-TVA204)Each KX-TVA204 adds 4 ports to the VPS which can be used for DPT Integration. KX-TVA204 cards can be
installed in slots 2 to 6 of the VPS.
Integration Type
Basic ConfigurationMaximum Configuration
(KX-TVA204  ´ 6)No. of JacksNo. of PortsNo. of JacksNo. of PortsDPT Integration24 (2 per jack)1224 (2 per jack)
Included Items
Extension Bolt  ´ 3, Screw  ´ 3
Installation 1.Position the front of the card so that the jacks fit in the open slot. Make sure that the tabs on both sides of
the card fit into place. Holding the card firmly in place, lower the other end of the card so that the card’s
hole fits over the extension bolt.
CAUTION
When installing optional cards, do not put pressure on the main board. Doing so may result in damage
to the VPS.
60Installation ManualDocument Version  3.0  2010/062.8.1 4-Port Digital Expansion Card (KX-TVA204)1
2Extension Bolt