Panasonic Kx Tva50 Installation Manual

							Section  7
Configuring VPS Features via PC Programming
This section explains how to configure the PBX via PC
Programming to use certain VPS features.Document Version  3.0  2010/06Installation Manual181 
						

							7.1  KX-TDE, KX-TDA, and KX-TAW Series
Programming for VPS Features
7.1.1  Live Call Screening Assignment via PC Programming KX-TDE, KX-TDA, and KX-TAW series PBX users can program Live Call Screening features via PC
programming. Follow the procedure below to assign each feature.
1. Go to the  Extension-Wired Extension-Extension Settings  screen.
2.Select the  Option 4 tab.
3. Set  LCS Recording Mode  to Keep Record  or Stop Record .
4. Set  LCS Answer Mode  to Hands free  or Private .
5. Click  Apply  to save the settings.
182Installation ManualDocument Version  3.0  2010/067.1.1 Live Call Screening Assignment via PC Programming  
						

							7.1.2  Button Assignment via PC ProgrammingKX-TDE, KX-TDA, and KX-TAW series PBX users can assign buttons for Live Call Screening (LCS), Two-way
Recording (TWR), Two-way Transfer (TWT), and Voice Mail Transfer (VTR) via PC Programming. Follow the
procedure below to assign each button.
1. Go to the  Extension-Wired Extension-Flexible Key  screen.
2.Select the  Extension Number / Name  for the extension you want to program.
3. Assign the desired key type to the  Key Location you wish to program. When  Two-way Record, Two-way
Transfer  or Voice Mail Transfer  is selected, enter the VM Port floating extension number in  Ext No. or
Floating Ext No. . When Two-way Transfer  is selected, you can enter the extension number of a desired
destination under  Extension Number of Mailbox . If no extension number is assigned, you will have to
enter an extension number each time you use the Two-way Transfer feature.
4. Repeat these steps for each extension.
5. Click  Apply  to save the settings.
Document Version  3.0  2010/06Installation Manual1837.1.2 Button Assignment via PC Programming  
						

							7.2  KX-TA824 Programming for VPS Features
7.2.1  Live Call Screening Assignment via PC Programming KX-TA824 users can program Live Call Screening features via PC programming. Follow the procedure below
to assign each feature.
1. Go to the  2.Extension - 2.Feature Settings  screen.
2. Under  LCS Password :
1. To set the LCS Password, enter a 3-digit number (using 0–9).
2. To cancel the LCS Password, delete the 3-digit number.
3. Click  Apply  to save the setting.
3.Go to the  2.Extension - 1.Main  screen.
4. Under  LCS Recording Mode , select Stop Recording  or Keep Recording .
184Installation ManualDocument Version  3.0  2010/067.2.1 Live Call Screening Assignment via PC Programming  
						

							5.Click  Apply  to save the setting.
6.Go to the  2.Extension - 3.PT personal settings  screen.
7. Under  LCS Mode , select Private or Hands-free .
8. Click  Apply  to save the setting.
Document Version  3.0  2010/06Installation Manual1857.2.1 Live Call Screening Assignment via PC Programming   
						

							7.2.2  Button Assignment via PC ProgrammingKX-TA824 users can assign buttons via PC programming. Follow the procedure below to assign each button.
1. Go to the  2.Extension - 4.Flexible Buttons  screen.
2. Select the desired CO button.
1. Select  LCS from the menu.
2. Click  OK to save the button.
3. Select the desired CO button.
1. Select  LCS Cancel  from the menu.
2. Click  OK to save the button.
4. Select the desired CO button.
1. Select  2-way Record  from the menu.
2. Enter the extension number of the VPS.
3. Click  OK to save the button.
5. Select the desired CO button.
1. Select  2-way Transfer  from the menu.
2. Enter the extension number of the VPS.
3. Click  OK to save the button.
4. Select the desired CO button.
a. Select  Voice Mail Transfer  from the menu.
b. Enter the extension number of the VPS.
c. Click  OK to save the button.186Installation ManualDocument Version  3.0  2010/067.2.2 Button Assignment via PC Programming  
						

							7.3  KX-TD500 Programming for VPS Features
7.3.1  Live Call Screening Assignment via PC Programming KX-TD500 users can program Live Call Screening features via PC programming. Follow the procedure below
to assign each feature.
1. Go to the  4-2 Extension Line  screen.
2.Select the  Card No. and Port No.  which you are going to program.
3. In LCS Setting :
1. To set the LCS Password, enter a 3-digit number (using 0–9) in  LCS Password.
Note
•To cancel the password, erase the 3-digit number
2. To assign LCS Recording Mode, set  Recording Mode to Keep Rec  or Stop Rec .
3. To assign LCS Private/Hands-free Mode, set  Operation Mode to Private  or Hands-free .
4. To activate the LCS status, set  Status to Active .
Note
•To utilize the Live Call Screening features, it is necessary to first assign the LCS Password and
LCS Button (see 7.3.2  Button Assignment via PC Programming), and then activate the LCS
status.
4. Click  Apply .
5. Repeat steps 2 to 4 for each extension.
Document Version  3.0  2010/06Installation Manual1877.3.1 Live Call Screening Assignment via PC Programming  
						

							7.3.2  Button Assignment via PC ProgrammingKX-TD500 users can assign buttons via PC programming. Follow the procedure below to assign each button.
1. Go to the  4-2 Extension Line  screen.
2. Select the  Card No. and Port No.  which you are going to program.
3. Click  CO Key  in the upper right corner. The  Flexible CO Key screen (for all CO keys) is displayed.
4.Click the button corresponding to the CO key you want to program.
The  Flexible CO Key  screen is displayed.
188Installation ManualDocument Version  3.0  2010/067.3.2 Button Assignment via PC Programming   
						

							5.Select the desired  Key Type. When 2WAY-REC , 2WAY-TRN , or VTR  is selected, enter the extension
number in  DN.
6. Click  OK. The Flexible CO Key screen (for all CO keys) is displayed again.
7. Click  OK. The  4-2 Extension Line  screen is displayed again.
8. Click  OK or Apply .
9. Repeat these steps for each extension.
Document Version  3.0  2010/06Installation Manual1897.3.2 Button Assignment via PC Programming  
						

							190Installation ManualDocument Version  3.0  2010/067.3.2 Button Assignment via PC Programming