Panasonic Kx Tva50 Installation Manual

							1.1.6  Recommendations for System ConfigurationIn order for the VPS to handle calls smoothly, generally there should be 1 VPS port for every 6 trunks (CO
lines) connected to the PBX. If Automated Attendant (AA) service is used, allotting 1 VPS port for every 4
trunks (CO lines) should be sufficient. If the PBX and VPS have heavy traffic and callers cannot reach the VPS
because of congestion, more VPS ports should be added.
Recommendations are outlined in the following charts.
KX-TVA50PBXKX-TVA50No. of Trunks (CO Lines)No. of Trunks
(CO Lines) When Using AA Service
No. of PortsNo. of Optional Port Cards1–61–41
0*1
7–125–8213–189–123
1
19–2413–16425–3017–205
2
31–3621–246
*1
The factory-installed jacks should be sufficient.
KX-TVA200
PBXKX-TVA200No. of Trunks (CO Lines)No. of Trunks
(CO Lines) When
Using AA Service
No. of PortsNo. of Optional Port Cards1–61–41
0*1
7–125–8213–189–12319–2413–16425–3017–205
1
31–3621–24637–4225–28743–4829–32849–5433–369
2
55–6037–401061–6641–441167–7245–4812Document Version  3.0  2010/06Installation Manual211.1.6 Recommendations for System Configuration 
						

							PBXKX-TVA200No. of Trunks(CO Lines)No. of Trunks
(CO Lines) When
Using AA Service
No. of PortsNo. of Optional Port Cards73–7849–5213
3
79–8453–561485–9057–601591–9661–641697–10265–6817
4
103–10869–7218109–11473–7619115–12077–8020121–12681–8421
5
127–13285–8822133–13889–9223139–14493–9624
*1The factory-installed jacks should be sufficient.
22Installation ManualDocument Version  3.0  2010/061.1.6 Recommendations for System Configuration 
						

							1.1.7  Compatible PBXsThe VPS can be integrated with the following PBXs using the integration types listed below.
KX-TVA50PBX ModelRecommended Integration TypeMinimum Software Version for
Recommended Integration TypeKX-TDE SeriesDPT Integration1.0KX-TDA SeriesDPT Integration1.0KX-TAW SeriesDPT Integration1.0KX-TA1232DPT IntegrationY831AA10621AKX-TA824APT Integration1.0.44KX-TA624APT IntegrationY581AKX-TD1232DPT IntegrationP231U91227AKX-TD816DPT IntegrationP301O91227AKX-TD500DPT IntegrationP171AA010312AKX-TD308DPT IntegrationP871F91227Third-party ManufacturerInband Integration or No Integration—
KX-TVA200
PBX ModelRecommended Integration TypeMinimum Software Version for
Recommended Integration TypeKX-TDE SeriesDPT Integration1.0KX-TDA SeriesDPT Integration1.0KX-TAW SeriesDPT Integration1.0KX-TA1232DPT IntegrationY831AA10621AKX-TD1232DPT IntegrationP231UKX-TD816DPT IntegrationP301OKX-TD500DPT IntegrationP171AA010312AKX-TD308DPT IntegrationP871F91227Document Version  3.0  2010/06Installation Manual231.1.7 Compatible PBXs 
						

							1.2  Voice Mail Integration
1.2.1  Overview In order for the VPS to function, it must be integrated with the PBX it is connected to. The type of integration
that is used determines how voice (caller messages, VPS prompts, etc.) and data (extension status, button
presses, etc.) are sent between the VPS and the PBX.
DPT Integration
When the VPS and PBX use DPT Integration, voices and data are sent digitally. The most significant advantage
of DPT Integration is that the 2B+D communication provides 2 VPS ports for each port. DPT Integration requires
the proper software level in the PBX as well as 4-conductor connections for each jack. In order for the VPS to
function properly using DPT Integration, the PBX and VPS must be programmed to work together. For a list
of PBXs that are compatible with DPT integration, see 1.1.7  Compatible PBXs.
To use DPT Integration, the lowest numbered jack of the VPS must be connected to the lowest numbered jack
assigned as a voice mail port in the PBX. See the DPT connection example(s) for your VPS model in the
following sections:
1.2.2  Connection Examples—KX-TVA50
1.2.3  Connection Examples—KX-TVA200
Connect the other jacks to the VPS in the same order as they are found in Voice Mail Port Assignment in the
PBX.
APT Integration (KX-TVA50 only)
When the VPS and PBX use APT Integration, voices are sent using analog technology, and data is sent
digitally. APT Integration requires the proper software level in the PBX as well as 4-conductor connections for
each jack. In order for the VPS to function properly using APT Integration, the PBX and VPS must be
programmed to work together. For a list of PBXs that are compatible with APT integration, see 1.1.7  Compatible
PBXs.
Inband Integration (KX-TVA50 only)
When the VPS and PBX use Inband Integration, voices are sent using analog technology, and data is sent
using analog DTMF tones.
No Integration (KX-TVA50 only)
When the VPS and PBX use no integration, voices are sent using analog technology and data is sent to the
VPS through the use of standard audio signals, such as DTMF tones, busy signals, ringback tones, etc.24Installation ManualDocument Version  3.0  2010/061.2.1 Overview 
						

							1.2.2  Connection Examples—KX-TVA50
DPT Integration When using DPT Integration, VPS jacks are connected to the digital extension ports of the PBX. Note that only
odd numbered VPS jacks (1, 3, and 5) can be used. Each of these VPS jacks provides 2 VPS ports and can
handle 1 call per port.
Note
•For DPT Integration, the lowest numbered jack of the VPS must be connected to the lowest numbered
port of the Voice Mail group assigned through PBX programming.
Connection Example (Factory-installed Jacks and KX-TVA502  ´ 2, DPT Integration
Mode)
Document Version  3.0  2010/06Installation Manual251.2.2 Connection Examples—KX-TVA50PBX (KX-TDA50)
Slot 1
Port 2 Port 1
Port 4
Port 3
Port 2
Port 1
KX-TVA50
Assigned as VM (DPT) ports
Jack 1
Jack 2
Factory- installed 
Jacks 
Slot 3
Port 6 Port 5Jack 5
Jack 6
KX-TVA502 
Slot 2
Port 4 Port 3Jack 3
Jack 4
KX-TVA502 
DLC4 Card
01 0203
01 0203
Jack 6
Jack 5
Jack 2
Jack 1
Jack 4
Jack 3  
						

							APT IntegrationWhen using APT Integration, VPS jacks are connected to the hybrid extension jacks of the PBX. Each VPS
jack provides 1 VPS port and can handle 1 call per port.
Note
•Jack 1 must be connected to the PBX.
Connection Example (Factory-installed Jacks and KX-TVA502  ´ 1, APT Integration
Mode)
Note
•A maximum of 4 VPS jacks can be connected to the PBX.
26Installation ManualDocument Version  3.0  2010/061.2.2 Connection Examples—KX-TVA50KX-TVA50PBX (KX-TA824)
Assigned as VM1 APT ports
Jack 7
Jack 8
Port 2 Port 1
Jack 1
Jack 2
Factory- installed 
Jacks 
Slot 1
Port 4 Port 3
Jack 3
Jack 4
KX-TVA502 
Slot 2
Jack 15
Jack 16
01
0203
01
Jack 2
Jack 1  
						

							Inband/No IntegrationWhen using Inband/No Integration, VPS jacks are connected to the SLT ports of the PBX. Each VPS jack
provides 1 VPS port and can handle 1 call per port.
Connection Example (Factory-installed Jacks and KX-TVA502  ´ 2, Inband/No Integration
Mode)Document Version  3.0  2010/06Installation Manual271.2.2 Connection Examples—KX-TVA50PBX (KX-TDA50)
Slot 1
Port 2 Port 1
Port 4 Port 5 Port 6 Port 7 Port 8
Port 3
Port 2
Port 1
KX-TVA50
Jack 1
Jack 2
Slot 3
Port 6 Port 5
Jack 5
Jack 6
KX-TVA502 KX-TVA502 
Slot 2
Port 4 Port 3
Jack 3
Jack 4
KX-TVA502 SLC8 Card
01 0203
01 0203
Jack 6
Jack 5
Jack 2
Jack 1
Jack 4
Jack 3  
						

							1.2.3  Connection Examples—KX-TVA200
DPT Integration The KX-TVA200 supports DPT Integration only, therefore it must be connected to the digital extension ports
of the PBX. Each VPS jack provides 2 VPS ports and can handle 1 call per port.
Note
•For DPT Integration, the lowest numbered jack of the VPS must be connected to the lowest numbered
port of the Voice Mail group assigned through PBX programming.
Connection Example (KX-TVA204  ´ 6, DPT Integration Mode)
28Installation ManualDocument Version  3.0  2010/061.2.3 Connection Examples—KX-TVA200PBX (KX-TDA100)
Slot 1
Port 4Port 3 Port 2Port 1
Port 4
Port 3
Port 2
Port 1 Port 8
Port 7
Port 6
Port 5 Port 12
Port 11
Port 10
Port 9 Port 16
Port 15
Port 14
Port 13
KX-TVA200
Assigned as VM (DPT) ports
Jack 1
Jack 2
KX-TVA204
Slot 3
Port 10
Port 11
Port 12Port  9Jack 5
Jack 6
KX-TVA204
Slot 5
Port 18 Port 17
Port 19
Port 20
Port 21
Port 22
Port 23
Port 24
Jack 10 Jack 9
KX-TVA204
Slot 6
Jack 12 Jack 11
KX-TVA204
Slot 4
Port 14 Port 13
Port 15
Port 16Jack 7
Jack 8 
KX-TVA204
Slot 2
Port 8 Port 7 Port 6Port 5
Jack 3
Jack 4
KX-TVA204
DLC16 Card
To KX-TVA200
12
11
10
9
8
7
6
5
4
3
2
1
0102 0304 05
06
0102 0304 05
06
Jack
Jack 12Jack 8
Jack 4
Jack 3
Jack 7
Jack 2
Jack 1
Jack 11
Jack 10
Jack 9
Jack 6
Jack 5  
						

							1.3  Specifications
HardwareSpecificationKX-TVA50KX-TVA200Available Port Cards2-Port Hybrid Expansion Card
(KX-TVA502)
2-Port Digital Expansion Card
(KX-TVA503)4-Port Digital Expansion Card
(KX-TVA204)Number of Port Card Slots26Data PortsUSB (built-in)
LAN (optional)
Modem (optional)USB (built-in) LAN (built-in)
Modem (optional)Additional HardwareMode SwitchTelephone Line
Connections• APT/DPT Integration: 4-conductor
cable
• Inband/No Integration:
2-conductor cable
4-conductor cable
Message Recording MediumFlash MemoryInternal Hard Disk Drive (HDD)Recording Capacity4 h (expandable to 8 h) *11000 hMain CPU32-bit microprocessorCompression Rate32 KbpsInternal Modem TypeV.90Dialing MethodDTMFFlash Time100 ms/300 ms/600 ms/900 ms
(programmable)–CPC DetectionNone/6.5 ms/150 ms/300 ms/450 ms/600 ms (programmable)–Line Type•Loop start minimum Loop Current:
20 mA
• Minimum Line Voltage: 7 V DC
• Minimum Ringing Voltage: 40 V
AC
–
Extension Numbering2 to 8 digits (programmable)Pause Length100 ms to 9900 ms (programmable)Message Waiting Lamp• APT/DPT Integration: Data Line of
APT/DPT Interface
• Inband Integration:
Programmable DTMF sequence
Data Line of DPT Interface
*1 The recording capacity specification shown here for the KX-TVA50 applies to when one system prompt language is installed.
Recording capacity is reduced by about 1 hour for each additional system prompt language that is installed.
Document Version  3.0  2010/06Installation Manual291.3 Specifications 
						

							SoftwareSpecificationKX-TVA50KX-TVA200Custom ServicesUp to 100Number of MessagesUnlimitedLength of Personal
Greeting MessageUp to 360 s (programmable)Message Retention Time1 to 30 days, unlimited (programmable)Maximum Message Length1 to 60 min., unlimited (programmable)Maximum Combined Length of
Messages per Mailbox1 to 120 min., unlimited (programmable)1 to 600 min., unlimited(programmable)No. of Mailboxes62 Subscriber + 2 Manager1022 Subscriber + 2 ManagerReportsMailbox Information Report
Call Account Report (Group calls by
Port)
Call Account Report (Group calls by
Mailbox)
Port Usage Report
Memory Card Usage Report
Mailbox Usage Report
Fax Call Report
Call Handling Statistics Report
Custom Service Report
Message Status Report
Subscriber Setup Report
Security Information Report
Hourly Statistics Report
E-mail ReportMailbox Information Report
Call Account Report (Group calls by
Port)
Call Account Report (Group calls by
Mailbox)
Port Usage Report
HDD Usage Report
Mailbox Usage Report
Fax Call Report
Call Handling Statistics Report
Custom Service Report
Message Status Report
Subscriber Setup Report
Security Information Report
Hourly Statistics Report
E-mail Report
Environment
SpecificationKX-TVA50KX-TVA200Environmental Requirements5 °C to 40 °C
(41 °F to 104 °F)Refer to "Environmental
Requirements", 2.1  Before InstallationPower Source100 V AC to 240 V AC, 0.25 A,50 Hz/ 60 Hz100 V AC to 240 V AC, 1.5 A, 50 Hz/
60 Hz (Panasonic AC adaptor,
PSLP1244) or 110 V AC to 240 V
AC, 1.35 A, 50 Hz/60 Hz (Panasonic
AC adaptor, PSLP1434)DC Input9 V, 0.75 A (6.75 W)40 V, 1.38 A (55.2 W)Dimensions (W  ´ H  ´ D)249 mm (W)  ´ 316 mm (H)
´  73 mm (D)
(9-13/16 in.  ´ 12-7/16 in.
´  2-7/8 in.)275 mm (W)  ´ 376 mm (H)  ´ 117 mm
(D)
(10-13/16 in.  ´ 14-13/16 in.  ´ 4-5/8
in.)30Installation ManualDocument Version  3.0  2010/061.3 Specifications