Panasonic Kx Taw848 Programing Manual

							2.10 [4] Extension
PC Programming Manual 351
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual References
1.17.4 Time Service
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used temporarily on a certain PS.
Default
1
Value Range
1–7
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings—TRS
2.13 [7] TRS
Feature Manual References
1.4.4 Dial Tone Transfer
1.17.5 TRS (Toll Restriction)
Parameter Selection (for Time Service - Automatic / Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to automatic.
Default
1
Value Range
1–8
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
2.8.5 [2-4] Week Table 
						

							2.10 [4] Extension
352 PC Programming Manual
Feature Manual References
1.17.4 Time Service
Ext. No. / Floating Ext. No. (for DSS)
Specifies the number of an extension to be accessed.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
None
Feature Manual References
None
Ext. No. / Floating Ext. No. (for ICD Group)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Feature Manual References
1.9.1 ICD GROUP FEATURES
Ext. No. / Floating Ext. No. (for Message Waiting)
Specifies the number of an extension or floating extension number of an incoming call distribution 
group for which messages are checked. If this cell is left empty, the PS will check its own messages 
only. 
						

							2.10 [4] Extension
PC Programming Manual 353
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
None
Feature Manual References
1.11.3 Message Waiting
Ext. No. / Floating Ext. No. (for Group Fwd (Both))
Specifies the floating extension number of an incoming call distribution group for which both intercom 
and CO line calls are forwarded.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
Feature Manual References
1.6.6 FWD (Call Forwarding)
Ext. No. / Floating Ext. No. (for Group Fwd (External))
Specifies the floating extension number of an incoming call distribution group for which CO line calls 
are forwarded.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button 
						

							2.10 [4] Extension
354 PC Programming Manual
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
Feature Manual References
1.6.6 FWD (Call Forwarding)
Ext. No. / Floating Ext. No. (for Group Fwd (Internal))
Specifies the floating extension number of an incoming call distribution group for which intercom calls 
are forwarded.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
Feature Manual References
1.6.6 FWD (Call Forwarding)
Ext. No. / Floating Ext. No. (for Log-in/Log-out)
Specifies the floating extension number of an incoming call distribution group to log-in to or log-out 
from.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out 
						

							2.10 [4] Extension
PC Programming Manual 355
Ext. No. / Floating Ext. No. (for Hurry-up)
Specifies the floating extension number of the incoming call distribution group whose longest waiting 
call will be redirected (Manual Queue Redirection).
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Overflow No Answer
Feature Manual References
1.9.5 ICD Group Features—Queuing
Ext. No. / Floating Ext. No. (for Two-way Record)
Specifies the floating extension number of the VM (DPT) group containing the PSs mailbox.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
2.9.16 [3-7-2] VM(DPT) Group—Unit Settings
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
Ext. No. / Floating Ext. No. (for Two-way Transfer)
Specifies the floating extension number of the VM (DPT) group containing the desired mailbox.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9) 
						

							2.10 [4] Extension
356 PC Programming Manual
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
2.9.16 [3-7-2] VM(DPT) Group—Unit Settings
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired mailbox.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
2.9.16 [3-7-2] VM(DPT) Group—Unit Settings
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
1.19.5 Voice Mail DTMF Integration
Dial (for One-touch)
Specifies the number to be dialed. The PBX can have a maximum of 500 One-touch Dialing buttons 
for PSs.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
None 
						

							2.10 [4] Extension
PC Programming Manual 357
Feature Manual References
1.12.2 One-touch Dialing
Optional Parameter (or Ringing Tone Type Number) (for Time Service)
Specifies the Time Table to be used for changing time modes in the Automatic Switching mode.
Default
1
Value Range
1–8
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual References
1.17.4 Time Service
Optional Parameter (or Ringing Tone Type Number) (for Call Park)
Specifies the number of the parking zone a call is to be parked in when a Call Park button with 
Parameter Selection (for Call Park) on this screen set to Specific is pressed.
Default
0
Value Range
0–99
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
None
Feature Manual References
1.3.5 Call Park
Ext No. of Mailbox (for Two-way Transfer)
Specifies the number of the extension whose mailbox will be used to record conversations using One-
touch Two-way Transfer. (For example, a secretary can record a conversation into the mailbox of a 
boss.) If the cell is left empty, the extension user must specify the number of an extension each time. 
						

							2.10 [4] Extension
358 PC Programming Manual
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.10 [4-2-3] Portable Station—Flexible Button
Programming Manual References
None
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
2.10.11 [4-2-3] Portable Station—Flexible Button—Flexible Button 
Data Copy
The flexible CO button settings of a PS can be copied to different PSs.
Destination Extension Line
Select the number and name of the PS that will receive the copied settings. Multiple PSs can be 
selected. To select all PSs at once, click Select All.
Maintenance Console Location
2.10.11 [4-2-3] Portable Station—Flexible Button—Flexible Button Data Copy
Programming Manual References
2.10.10 [4-2-3] Portable Station—Flexible Button
Feature Manual References
None
2.10.12 [4-2-4] Portable Station—Simplified Voice Message
When an SVM card is installed in the PBX, Simplified Voice Message features can be provided for 
each PS.
This screen allows you to specify which card each extension belongs to, and the maximum number 
of messages that can be stored for each extension.
For more information on Simplified Voice Message, see 1.16.5 SVM (Simplified Voice Message) in 
the Feature Manual.
Extension Number
Indicates the extension number (reference only). 
						

							2.10 [4] Extension
PC Programming Manual 359
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.12 [4-2-4] Portable Station—Simplified Voice Message
Programming Manual References
2.7.12 [1-2] Portable Station—Extension No.
Feature Manual References
None
Extension Name
Indicates the name of the extension (reference only).
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.10.12 [4-2-4] Portable Station—Simplified Voice Message
Programming Manual References
2.7.12 [1-2] Portable Station—Extension Name
2.10.8 [4-2-1] Portable Station—Extension Settings—Extension Name
Feature Manual References
None
Simplified Voice Message
Selects which SVM card to use to store and play back greetings and messages for the extension.
Each extension must be assigned to a specific SVM card, and can only use the assigned card. If two 
SVM cards are installed in the PBX, you should assign a number of extensions to each card, to 
ensure that the necessary resources, such as message recording space, are available for each 
extension.
Default
Card1
Value Range
None, Card1, Card2 
						

							2.10 [4] Extension
360 PC Programming Manual
Maintenance Console Location
2.10.12 [4-2-4] Portable Station—Simplified Voice Message
Programming Manual References
None
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
Maximum of SVM Log
Specifies the maximum number of voice messages (not including greeting messages) that can be 
stored for the extension.
Default
10
Value Range
1–100
Maintenance Console Location
2.10.12 [4-2-4] Portable Station—Simplified Voice Message
Programming Manual References
None
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
2.10.13 [4-3] DSS Console—Flexible Button
A DSS Console can be used in conjunction with a PT. A maximum of 4 DSS Consoles can be 
programmed. The DPT Type—Type (for Hybrid port) of the extension port that DSS Console is 
connected must be set to DSS in 2.7.4 [1-1] Slot—Extension Port.
Each flexible DSS button can be customized to access a certain feature. A maximum of 66 flexible 
DSS buttons can be customized for each DSS Console. Select the desired DSS Console from the 
DSS Console No. list. 
To copy the flexible DSS button settings from one location to another, click the Copy to button.
For more information on flexible buttons, see 1.6.3 Flexible Buttons in the Feature Manual.
Pair Extension
Specifies the extension number of the PT to be used in pair with the DSS Console.
Default
None