Panasonic Kx Taw848 Programing Manual

							2.9 [3] Group
PC Programming Manual 201
Simplified Voice Message Tone Detection—Silence
Enables the disconnection of an SVM-originated CO-to-CO line call by silence detection.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.9.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
None
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
Simplified Voice Message Tone Detection—Continuous
Enables the disconnection of an SVM-originated CO-to-CO line call by continuous signal detection.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.9.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
None
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
Simplified Voice Message Tone Detection—Cyclic
Enables the disconnection of an SVM-originated CO-to-CO line call by cyclic signal detection.
Default
Enable
Value Range
Disable, Enable 
						

							2.9 [3] Group
202 PC Programming Manual
Maintenance Console Location
2.9.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
None
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
Host PBX Access Code
Group Name
Specifies the name of the trunk group for programming reference.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.9.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
2.15.1 [9-1] CO Line Settings
Feature Manual References
None
Host PBX Access Code 1–10
Specifies the feature number used to access a CO line from the host PBX.
Default
Not stored.
Value Range
Max. 10 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.9.1 [3-1-1] Trunk Group—TRG Settings
Programming Manual References
2.15.1 [9-1] CO Line Settings 
						

							2.9 [3] Group
PC Programming Manual 203
Feature Manual References
1.8.5 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
2.9.2 [3-1-2] Trunk Group—Local Access Priority
Trunk groups can be assigned a priority for Idle Line Access. When making a CO line call by Idle Line 
Access, the PBX will search trunk groups for an idle CO line according to the priority assigned here.
Trunk Group No. & Name
Specifies the trunk group assigned to the corresponding priority level.
Select the blank option to not assign a trunk group to the priority.
Default
Priority 1–64 = Trunk Group No. 1–64
Value Range
Trunk Group No. 1–64
Maintenance Console Location
2.9.2 [3-1-2] Trunk Group—Local Access Priority
Programming Manual References
2.15.1 [9-1] CO Line Settings
Feature Manual References
1.3.11 CO Line Access
1.7.1 GROUP FEATURES
2.9.3 [3-2] Extension Group
Extensions can be assigned to a tenant according to their extension user groups. An extension user 
group can belong to only one tenant. However, one extension user group can belong to several call 
pickup groups and several paging groups. A maximum of 8 tenants can be programmed.
Extension Group Name
Specifies the name of the extension user group.
Default
Extension User Group 1–32: Extension Group 01–32
Value Range
Max. 20 characters 
						

							2.9 [3] Group
204 PC Programming Manual
Maintenance Console Location
2.9.3 [3-2] Extension Group
Programming Manual References
2.9.4 [3-3] Call Pickup Group
2.9.6 [3-4] Paging Group
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Extension Group
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Extension Group
Feature Manual References
1.7.1 GROUP FEATURES
Tenant Number
Specifies the tenant to which the extension user group belongs.
Default
1
Value Range
1–8
Maintenance Console Location
2.9.3 [3-2] Extension Group
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual References
1.7.1 GROUP FEATURES
1.17.2 Tenant Service
2.9.4 [3-3] Call Pickup Group
Extensions can be assigned to a call pickup group according to their extension user groups. One 
extension user group can belong to up to 8 call pickup groups. A maximum of 64 call pickup groups 
can be programmed.
To assign extension user groups to call pickup groups easily, click All Setting.
Extension Group Name
Indicates the name of the extension user group (reference only).
Default
Extension User Group 1–32: Extension Group 01–32 
						

							2.9 [3] Group
PC Programming Manual 205
Value Range
Max. 20 characters
Maintenance Console Location
2.9.4 [3-3] Call Pickup Group
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings
2.10.8 [4-2-1] Portable Station—Extension Settings
Feature Manual References
1.3.6 Call Pickup
1.7.1 GROUP FEATURES
Pickup Group—1st–8th
Selects the call pickup groups that the extension user group belongs to. One extension user group 
can be assigned to a maximum of 8 call pickup groups on this screen. To assign an extension user 
group to more than 8 call pickup groups, click All Setting.
Default
Same as extension user group number
Value Range
None, 01–64
Maintenance Console Location
2.9.4 [3-3] Call Pickup Group
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings
2.10.8 [4-2-1] Portable Station—Extension Settings
Feature Manual References
1.3.6 Call Pickup
1.7.1 GROUP FEATURES
2.9.5 [3-3] Call Pickup Group—All Setting
Extensions can be assigned to a call pickup group according to their extension user groups. One 
extension user group can belong to multiple call pickup groups.
Call Pickup Group Name
Specifies the name of the call pickup group. 
						

							2.9 [3] Group
206 PC Programming Manual
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.9.5 [3-3] Call Pickup Group—All Setting
Programming Manual References
2.9.4 [3-3] Call Pickup Group
Feature Manual References
1.3.6 Call Pickup
1.7.1 GROUP FEATURES
Extension Group 1–32
Specifies whether the extension user group belongs to the corresponding pickup group.
Default
ON for the same-numbered call pickup group
Value Range
ON (blue), OFF
Maintenance Console Location
2.9.5 [3-3] Call Pickup Group—All Setting
Programming Manual References
2.9.3 [3-2] Extension Group
2.9.4 [3-3] Call Pickup Group
Feature Manual References
1.3.6 Call Pickup
1.7.1 GROUP FEATURES
2.9.6 [3-4] Paging Group
Extensions can be assigned to a paging group according to their extension user groups. External 
pagers can also be assigned to a paging group. One extension user group or external pager can 
belong to multiple paging groups. A maximum of 32 paging groups can be programmed.
To assign external pagers to paging groups, click External Pager. To assign extension user groups 
to paging groups easily, click All Setting. 
						

							2.9 [3] Group
PC Programming Manual 207
Extension Group Name
Indicates the name of the extension user group (reference only).
Default
Extension User Group 1–32: Extension Group 01–32
Value Range
Max. 20 characters
Maintenance Console Location
2.9.6 [3-4] Paging Group
Programming Manual References
2.9.3 [3-2] Extension Group—Extension Group Name
Feature Manual References
1.7.1 GROUP FEATURES
1.13.1 Paging
Paging Group—1st–8th
Selects the paging groups that the extension user group belongs to. One extension user group can 
be assigned to a maximum of 8 paging groups on this screen. To assign an extension user group to 
more than 8 paging groups, click All Setting.
Default
Same as extension user group number
Value Range
None, 01–32
Maintenance Console Location
2.9.6 [3-4] Paging Group
Programming Manual References
2.9.3 [3-2] Extension Group
2.9.7 [3-4] Paging Group—All Setting
Feature Manual References
1.7.1 GROUP FEATURES
1.13.1 Paging
2.9.7 [3-4] Paging Group—All Setting
Extensions can be assigned to a paging group according to their extension user groups. One 
extension user group or external pager can belong to multiple paging groups. 
						

							2.9 [3] Group
208 PC Programming Manual
Paging Group Name
Specifies the name of the paging group.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.9.7 [3-4] Paging Group—All Setting
Programming Manual References
2.9.6 [3-4] Paging Group
Feature Manual References
1.7.1 GROUP FEATURES
1.13.1 Paging
Extension Group 1–32
Specifies whether the extension user group belongs to the corresponding paging group.
Default
ON for same numbered paging group
Value Range
ON, OFF
Maintenance Console Location
2.9.7 [3-4] Paging Group—All Setting
Programming Manual References
2.9.3 [3-2] Extension Group
2.9.6 [3-4] Paging Group
Feature Manual References
1.7.1 GROUP FEATURES
1.13.1 Paging
2.9.8 [3-4] Paging Group—External Pager
External pagers can be assigned to a paging group. One external pager can belong to multiple paging 
groups. 
						

							2.9 [3] Group
PC Programming Manual 209
Paging Group Name
Indicates the name of the paging group (reference only).
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.9.8 [3-4] Paging Group—External Pager
Programming Manual References
2.9.7 [3-4] Paging Group—All Setting—Paging Group Name
Feature Manual References
1.7.1 GROUP FEATURES
1.13.1 Paging
External Pager 1
Specifies whether the external pager belongs to the corresponding paging group.
Default
ON
Value Range
ON (blue), OFF
Maintenance Console Location
2.9.8 [3-4] Paging Group—External Pager
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings
2.10.8 [4-2-1] Portable Station—Extension Settings
Feature Manual References
1.7.1 GROUP FEATURES
1.13.1 Paging
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Extensions can be assigned as members of an incoming call distribution group. Calls to an incoming 
call distribution group are distributed to its member extensions as programmed. A maximum of 128 
incoming call distribution groups can be programmed.
To view a list of all programmed extension numbers and types, click Extension List View (see 2.4.4 
Tool—Extension List View). To assign extensions to ICD groups and change extension settings,  
						

							2.9 [3] Group
210 PC Programming Manual
click Member List.
For more information on ICD Groups, see 1.9.1 ICD GROUP FEATURES in the Feature Manual.
Main
Floating Extension Number
Specifies the floating extension number of the incoming call distribution group.
Note that groups that will have a mailbox using a VM in DPT integration must have extension numbers 
of 2–4 digits.
Default
Groups 001-064: 601–664
Groups 065-128: Not stored
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
None
Group Name
Specifies the name of the incoming call distribution group.
Default
ICD Group 001–ICD Group 128
Value Range
Max. 20 characters
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
None