Panasonic Kx Taw848 Programing Manual

							2.9 [3] Group
PC Programming Manual 211
Distribution Method
Selects the method for distributing calls to idle extensions of the incoming call distribution group.
Default
Ring
Value Range
Ring, UCD, Priority Hunting
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.9.2 ICD Group Features—Group Call Distribution
Call Waiting Distribution
Selects the call waiting distribution method for busy extensions of the incoming call distribution group.
Default
Distribution
Value Range
All, Distribution
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.9.2 ICD Group Features—Group Call Distribution
FWD Mode
Specifies whether extensions in FWD mode ring when a call is received at the incoming call 
distribution group.
Default
Ring
Value Range
No Ring, Ring 
						

							2.9 [3] Group
212 PC Programming Manual
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
2.10.2 [4-1-2] Wired Extension—FWD/DND
2.10.9 [4-2-2] Portable Station—FWD / DND
Feature Manual References
1.6.6 FWD (Call Forwarding)
1.9.2 ICD Group Features—Group Call Distribution
DND Mode
Specifies whether extensions in DND mode ring when a call is received at the incoming call 
distribution group.
Default
No Ring
Value Range
No Ring, Ring
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
2.10.2 [4-1-2] Wired Extension—FWD/DND
2.10.9 [4-2-2] Portable Station—FWD / DND
Feature Manual References
1.4.8 DND (Do Not Disturb)
1.9.2 ICD Group Features—Group Call Distribution
Tenant Number
Specifies the tenant to which the incoming call distribution group belongs, to determine the Time 
Table and the audio source for the group. (The tenant number corresponds to the Time Table 
number.)
Default
1
Value Range
1–8
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings 
						

							2.9 [3] Group
PC Programming Manual 213
Programming Manual References
2.8.3 [2-2] Operator & BGM
2.8.5 [2-4] Week Table
2.12.6 [6-6] Tenant—Music On Hold
Feature Manual References
1.11.4 Music on Hold
1.17.2 Tenant Service
COS
Specifies the COS of the incoming call distribution group. Depending on the COS, calls from certain 
extensions are restricted as determined by the Internal Call Block feature. Also, when calls are 
forwarded or overflowed to a CO line, the TRS assigned for the COS of the incoming call distribution 
group applies.
Default
1
Value Range
1–64
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings
2.8.12 [2-7-2] Class of Service—External Call Block
2.8.13 [2-7-3] Class of Service—Internal Call Block
Feature Manual References
1.3.16 COS (Class of Service)
1.9.12 Internal Call Block
1.17.5 TRS (Toll Restriction)
Overflow Queuing Busy
Floating Extension Number
Specifies the floating extension number of the incoming call distribution group.
Note that groups that will have a mailbox using a VM in DPT integration must have extension numbers 
of 2–4 digits.
Default
Groups 001-064: 601–664
Groups 065-128: Not stored 
						

							2.9 [3] Group
214 PC Programming Manual
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
None
Group Name
Specifies the name of the incoming call distribution group.
Default
ICD Group 001–ICD Group 128
Value Range
Max. 20 characters
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
None
Queuing Busy—Destination-Day, Lunch, Break, Night
Specifies the overflow destination of calls that cannot be queued in each time mode.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, [ ] [Secret], and P [Pause])
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
2.8.5 [2-4] Week Table 
						

							2.9 [3] Group
PC Programming Manual 215
Feature Manual References
1.9.4 ICD Group Features—Overflow
Queuing Busy—Queue Call Capacity
Specifies the number of calls that can wait in a queue.
Default
30
Value Range
None, 1–30
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.9.5 ICD Group Features—Queuing
Overflow No Answer
Floating Extension Number
Specifies the floating extension number of the incoming call distribution group.
Note that groups that will have a mailbox using a VM in DPT integration must have extension numbers 
of 2–4 digits.
Default
Groups 001-064: 601–664
Groups 065-128: Not stored
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
None 
						

							2.9 [3] Group
216 PC Programming Manual
Group Name
Specifies the name of the incoming call distribution group.
Default
ICD Group 001–ICD Group 128
Value Range
Max. 20 characters
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
None
Time out & Manual Queue Redirection—Destination-Day, Lunch, Break, 
Night
Specifies the overflow destination of queued calls when they are not answered or are redirected by 
Manual Queue Redirection in each time mode.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, [ ] [Secret], and P [Pause])
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual References
1.9.4 ICD Group Features—Overflow
1.9.5 ICD Group Features—Queuing
Time out & Manual Queue Redirection—Overflow Time
Specifies the length of time calls wait in a queue before they are redirected to the overflow destination.
Default
None 
						

							2.9 [3] Group
PC Programming Manual 217
Value Range
None, 10 × n (n=1–125) s
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.9.4 ICD Group Features—Overflow
1.9.5 ICD Group Features—Queuing
Hurry-up Level
Specifies the number of calls to hold in the queue before prompting Manual Queue Redirection by 
flashing the Hurry-up button.
Default
None
Value Range
None, 1–30
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
2.10.4 [4-1-4] Wired Extension—Flexible Button
2.10.10 [4-2-3] Portable Station—Flexible Button
Feature Manual References
1.9.5 ICD Group Features—Queuing
Queuing Time Table
Floating Extension Number
Specifies the floating extension number of the incoming call distribution group.
Note that groups that will have a mailbox using a VM in DPT integration must have extension numbers 
of 2–4 digits.
Default
Groups 001-064: 601–664
Groups 065-128: Not stored 
						

							2.9 [3] Group
218 PC Programming Manual
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
None
Group Name
Specifies the name of the incoming call distribution group.
Default
ICD Group 001–ICD Group 128
Value Range
Max. 20 characters
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
None
Queuing Time Table—Day, Lunch, Break, Night
Specifies the Queuing Time Table to be used in each time mode.
Default
None
Value Range
None, Table 1–Table 64
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
2.8.5 [2-4] Week Table 
						

							2.9 [3] Group
PC Programming Manual 219
Feature Manual References
1.9.5 ICD Group Features—Queuing
Queuing Time Table When Extension Ringing
Enables the PBX to play messages/BGM to the caller according to the Queuing Time Table, when the 
call arrives at an extension without being queued or after being queued.
Default
Enable
Value Range
Disable (Ringback Tone), Enable
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.9.5 ICD Group Features—Queuing
Miscellaneous
Floating Extension Number
Specifies the floating extension number of the incoming call distribution group.
Note that groups that will have a mailbox using a VM in DPT integration must have extension numbers 
of 2–4 digits.
Default
Groups 001-064: 601–664
Groups 065-128: Not stored
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
None 
						

							2.9 [3] Group
220 PC Programming Manual
Group Name
Specifies the name of the incoming call distribution group.
Default
ICD Group 001–ICD Group 128
Value Range
Max. 20 characters
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
None
Extension No Answer Redirection Time
Specifies the length of time that a call queues at an extension before it is redirected to the next 
member extension of the incoming call distribution group, in UCD or Priority Hunting distribution 
method.
Default
None
Value Range
None, 10 × n (n=1–15) s
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.9.2 ICD Group Features—Group Call Distribution
1.9.5 ICD Group Features—Queuing
No. of Unanswered Calls for Automatic Log-out
Specifies the number of consecutive unanswered calls before a member extension is automatically 
logged out from the incoming call distribution group.
Default
None