Panasonic Kx Taw848 Programing Manual

							2.9 [3] Group
PC Programming Manual 221
Value Range
None, 1–15
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
Maximum No. of Busy Extensions
Specifies the number of extensions that can accept calls simultaneously in the incoming call 
distribution group.
Default
Max.
Value Range
Max: Call arrives at an idle extension.
1–32 : Call will not arrive at an idle extension when the number of busy extensions exceeds the 
assigned number.
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.9.2 ICD Group Features—Group Call Distribution
Last Extension Log-out
Specifies whether the last extension logged-in to the incoming call distribution group is allowed to log 
out.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings 
						

							2.9 [3] Group
222 PC Programming Manual
Programming Manual References
None
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
VIP Call Mode
Enables VIP Call mode, to prioritize calls received from multiple incoming call distribution groups.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.9.6 ICD Group Features—VIP Call
Programmed Mailbox No.
Specifies the mailbox number of the incoming call distribution groups mailbox for Voice Processing 
Systems (VPS) with DTMF Integration.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.19.5 Voice Mail DTMF Integration
Group Log / Group FWD
To set extension numbers easily, click Destination Setting (see 2.1.6 Extension Number Setting). 
						

							2.9 [3] Group
PC Programming Manual 223
Floating Extension Number
Specifies the floating extension number of the incoming call distribution group.
Note that groups that will have a mailbox using a VM in DPT integration must have extension numbers 
of 2–4 digits.
Default
Groups 001-064: 601–664
Groups 065-128: Not stored
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
None
Group Name
Specifies the name of the incoming call distribution group.
Default
ICD Group 001–ICD Group 128
Value Range
Max. 20 characters
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
None
Incoming Call Log Memory
Specifies the number of unanswered calls to the incoming call distribution group that can be logged 
in the call log memory.
Default
10 
						

							2.9 [3] Group
224 PC Programming Manual
Value Range
0–100
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.3.3 Call Log, Incoming
Group FWD Call from CO—Setting
Indicates the current FWD status for incoming CO line calls directed to the incoming call distribution 
group (reference only).
Default
Off
Value Range
Off, On
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.6.6 FWD (Call Forwarding)
Group FWD Call from CO—Destination
Specifies the forward destination of incoming CO line calls directed to the incoming call distribution 
group.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, [ ] [Secret], and P [Pause])
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None 
						

							2.9 [3] Group
PC Programming Manual 225
Feature Manual References
1.6.6 FWD (Call Forwarding)
Group FWD Call from Extension—Setting
Indicates the current FWD status for incoming intercom calls directed to the incoming call distribution 
group (reference only).
Default
Off
Value Range
Off, On
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.6.6 FWD (Call Forwarding)
Group FWD Call from Extension—Destination
Specifies the forward destination of incoming intercom calls directed to the incoming call distribution 
group.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, [ ] [Secret] and P [Pause])
Maintenance Console Location
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Programming Manual References
None
Feature Manual References
1.6.6 FWD (Call Forwarding) 
						

							2.9 [3] Group
226 PC Programming Manual
2.9.10 [3-5-2] Incoming Call Distribution Group—Queuing Time 
Ta b l e
A Queuing Time Table can contain up to 16 sequences which control how calls waiting in a queue are 
handled. A maximum of 64 Queuing Time Tables can be programmed.
Queuing Sequence—Sequence 01–16
Specifies the command activated by the corresponding sequence.
Default
None
Value Range
None: Redirects the call to the next sequence
Overflow: Redirects the call to the overflow destination when there is no answer
Disconnect: Disconnects the line
Sequence 01–16: Redirects the call to a different sequence
Wait 5 × n (n=1–16) s: If preceded by an OGM, plays the Music on Hold for the specified period of 
time; if not preceded by an OGM, sends a ringback tone for the specified period of time.
OGM 01–32: Sends a certain OGM
Maintenance Console Location
2.9.10 [3-5-2] Incoming Call Distribution Group—Queuing Time Table
Programming Manual References
None
Feature Manual References
1.11.4 Music on Hold
1.12.1 OGM (Outgoing Message)
1.9.4 ICD Group Features—Overflow
1.9.5 ICD Group Features—Queuing
2.9.11 [3-5-3] Incoming Call Distribution Group—Miscellaneous
Optional settings related to Incoming Call Distribution Groups can be programmed.
Options—Call Log to ICD Group for Answered Call
Selects whether answered calls to an ICD Group are also logged in the Incoming Call Log for the 
group, in addition to the log of the extension that answered the call.
Default
Enable 
						

							2.9 [3] Group
PC Programming Manual 227
Value Range
Disable, Enable
Maintenance Console Location
2.9.11 [3-5-3] Incoming Call Distribution Group—Miscellaneous
Programming Manual References
None
Feature Manual References
1.9.1 ICD GROUP FEATURES
2.9.12 [3-5-4] Incoming Call Distribution Group—Member
Each incoming call distribution group can have a maximum of 32 members (extensions) assigned to 
it, and each member can have its own delayed ringing and Wrap-up time settings. An extension can 
be a member of multiple incoming call distribution groups. Select the desired ICD group (1–128) from 
the ICD Group No. list.
To assign members to the group, enter directly or click Extension Number Setting (see 2.1.6 
Extension Number Setting). To copy the members to another group, click Member List Copy, 
select the group, and click OK.
Extension Number
Specifies the extension number of each member. In addition to the extension numbers of PT, SLT and 
PS extensions, floating extension numbers of PS Ring groups can also be specified.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.9.12 [3-5-4] Incoming Call Distribution Group—Member
Programming Manual References
2.9.21 [3-9] PS Ring Group—Floating Extension Number
Feature Manual References
1.9.1 ICD GROUP FEATURES
Extension Name
Indicates the name of the extension (reference only).
Default
Not stored. 
						

							2.9 [3] Group
228 PC Programming Manual
Value Range
Max. 20 characters
Maintenance Console Location
2.9.12 [3-5-4] Incoming Call Distribution Group—Member
Programming Manual References
2.9.21 [3-9] PS Ring Group—Group Name
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Extension Name
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Extension Name
Feature Manual References
1.9.1 ICD GROUP FEATURES
Delayed Ring
Specifies the delayed ringing setting of each member. (Applicable when the call distribution method 
of the incoming call distribution group is set to Ring.)
Default
Immediate
Value Range
Immediate, 1–6 Rings, No Ring
Maintenance Console Location
2.9.12 [3-5-4] Incoming Call Distribution Group—Member
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Main—Distribution Method
Feature Manual References
1.9.2 ICD Group Features—Group Call Distribution
2.9.13 [3-6] Extension Hunting Group
If an extension within an idle extension hunting group is called when it is busy or in DND mode, the 
call can be redirected to another extension in the same hunting group, according to a preprogrammed 
hunting type. If there is no idle extension in the group, the call can then be redirected to the overflow 
destination, which can be different depending on the time mode (day/lunch/break/night). A maximum 
of 64 hunting groups can be programmed, each containing up to 16 extensions.
To assign members to the group, click Member List. To assign extensions as overflow destinations 
easily, click Destination Setting (see 2.1.6 Extension Number Setting).
Hunting Group Name
Specifies the name of the hunting group. 
						

							2.9 [3] Group
PC Programming Manual 229
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.9.13 [3-6] Extension Hunting Group
Programming Manual References
None
Feature Manual References
1.9.7 Idle Extension Hunting
Hunting Type
Specifies the hunting type for the hunting group.
Default
Circular
Value Range
Circular: Circulates until the call is answered or overflowed
Terminated: Terminates at the last extension
Maintenance Console Location
2.9.13 [3-6] Extension Hunting Group
Programming Manual References
None
Feature Manual References
1.7.1 GROUP FEATURES
1.9.7 Idle Extension Hunting
Overflow—Day, Lunch, Break, Night
Specifies the overflow destination of an unanswered call in each time mode.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash]) 
						

							2.9 [3] Group
230 PC Programming Manual
Maintenance Console Location
2.9.13 [3-6] Extension Hunting Group
Programming Manual References
None
Feature Manual References
1.9.7 Idle Extension Hunting
2.9.14 [3-6] Extension Hunting Group—Member List
Each hunting group can contain up to 16 extensions. Select the hunting group to program from the 
Hunting Group No. list.
To assign members to the group, enter the extension numbers in Extension Number or click 
Extension Number Setting (see 2.1.6 Extension Number Setting). To copy numbers to another 
group, click Member List Copy, select the group, and click OK.
Extension Number
Specifies the extension number of the hunting group member.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.9.14 [3-6] Extension Hunting Group—Member List
Programming Manual References
2.9.13 [3-6] Extension Hunting Group
Feature Manual References
1.9.7 Idle Extension Hunting
Extension Name
Indicates the name of the extension, when an extension number is specified in Extension Number 
above (reference only).
Default
Not stored.
Value Range
Max. 20 characters