Panasonic Kx Taw848 Programing Manual

							2.10 [4] Extension
PC Programming Manual 301
Maintenance Console Location
2.10.2 [4-1-2] Wired Extension—FWD/DND
Programming Manual References
None
Feature Manual References
1.6.6 FWD (Call Forwarding)
2.10.3 [4-1-3] Wired Extension—Speed Dial
Personal Speed Dialing allows extension users to dial frequently dialed numbers using two-digit 
speed dialing numbers (00–09). A maximum of 10 Personal Speed Dialing numbers can be 
programmed for each extension. Select the desired extension from the Extension Number / Name 
list.
Speed Dialing Name
Specifies the name of the Personal Speed Dialing number to call using the Personal Speed Dialing 
Directory shown on the extensions display.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.10.3 [4-1-3] Wired Extension—Speed Dial
Programming Manual References
None
Feature Manual References
1.16.3 Speed Dialing, Personal
Dialing Number
Specifies the number to be dialed by the Personal Speed Dialing number.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash]) 
						

							2.10 [4] Extension
302 PC Programming Manual
Maintenance Console Location
2.10.3 [4-1-3] Wired Extension—Speed Dial
Programming Manual References
None
Feature Manual References
1.16.3 Speed Dialing, Personal
2.10.4 [4-1-4] Wired Extension—Flexible Button
Each flexible CO button can be customized to allow one-touch access to a certain feature. A 
maximum of 12 flexible CO buttons can be customized for each extension. Select the desired 
extension from the Extension Number / Name list.
To copy the flexible CO button settings of an extension to another extension, click Copy to.
For more information on flexible buttons, see 1.6.3 Flexible Buttons in the Feature Manual.
Ty p e
Specifies the feature to be assigned to the flexible CO button.
Default
Key Location 1–8: Single CO
Key Location 9–12: Not Stored
Value Range
Not Stored, Loop CO, Single CO, Group CO, DSS, One-touch, ICD Group, Message Waiting, FWD/
DND (Both), FWD/DND (External), FWD/DND (Internal), Group Fwd (Both), Group Fwd (External), 
Group Fwd (Internal), Account, Conference, Terminate, EFA, Call Park, Call Log, Log-in/Log-out, 
Hurry-up, Wrap-up, System Alarm, Time Service, Answer, Release, TRS Level Change, Time 
Service - Automatic/Manual, Two-way Record, Two-way Transfer, LCS, Voice Mail Transfer
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
2.10.5 [4-1-4] Wired Extension—Flexible Button—Flexible Button Data Copy
Feature Manual References
1.6.3 Flexible Buttons
Parameter Selection (for Single CO)
Specifies the CO line to be accessed.
Default
1 
						

							2.10 [4] Extension
PC Programming Manual 303
Value Range
1–8
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
2.10.5 [4-1-4] Wired Extension—Flexible Button—Flexible Button Data Copy
Feature Manual References
1.3.11 CO Line Access
Parameter Selection (for Group CO)
Specifies the trunk group to be accessed.
Default
1
Value Range
1–64
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
2.9.1 [3-1-1] Trunk Group—TRG Settings
Feature Manual References
1.3.11 CO Line Access
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically or in a specific parking zone.
Default
Automatic
Value Range
Automatic, Specific
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None 
						

							2.10 [4] Extension
304 PC Programming Manual
Feature Manual References
1.3.5 Call Park
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the extension belongs to are logged in to or 
logged out from.
Default
None
Value Range
None: The incoming call distribution group is selected manually.
All: All incoming call distribution groups that the extension belongs to.
Incoming Group: A pre-specified incoming call distribution group
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Default
All
Value Range
All (Day/Night/Lunch/Break), Day/Night/Break, Day/Night/Lunch, Day/Night
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual References
1.17.4 Time Service
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used temporarily on a certain extension. 
						

							2.10 [4] Extension
PC Programming Manual 305
Default
1
Value Range
1–7
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings—TRS
2.13 [7] TRS
Feature Manual References
1.4.4 Dial Tone Transfer
1.17.5 TRS (Toll Restriction)
Parameter Selection (for Time Service - Automatic/Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to automatic.
Default
1
Value Range
1–8
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual References
1.17.4 Time Service
Ext. No. / Floating Ext. No. (for DSS)
Specifies the number of an extension to be accessed.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9) 
						

							2.10 [4] Extension
306 PC Programming Manual
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None
Feature Manual References
None
Ext. No. / Floating Ext. No. (for ICD Group)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Feature Manual References
1.9.1 ICD GROUP FEATURES
Ext. No. / Floating Ext. No. (for Message Waiting)
Specifies the number of an extension or floating extension number of an incoming call distribution 
group for which messages are checked. If this cell is left empty, the extension will check its own 
messages only.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None
Feature Manual References
1.11.3 Message Waiting 
						

							2.10 [4] Extension
PC Programming Manual 307
Ext. No. / Floating Ext. No. (for Group FWD (Both))
Specifies the floating extension number of an incoming call distribution group for which both intercom 
and CO line calls are forwarded.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
Feature Manual References
1.6.6 FWD (Call Forwarding)
Ext. No. / Floating Ext. No. (for Group FWD (External))
Specifies the floating extension number of an incoming call distribution group for which CO line calls 
are forwarded.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
Feature Manual References
1.6.6 FWD (Call Forwarding)
Ext. No. / Floating Ext. No. (for Group FWD (Internal))
Specifies the floating extension number of an incoming call distribution group for which intercom calls 
are forwarded.
Default
Not stored. 
						

							2.10 [4] Extension
308 PC Programming Manual
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
Feature Manual References
1.6.6 FWD (Call Forwarding)
Ext. No. / Floating Ext. No. (for Call Log)
Specifies the extensions own number or the floating extension number of an incoming call distribution 
group for which call log information is displayed. If the cell is left empty, the extension will display its 
own call log information.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None
Feature Manual References
1.3.3 Call Log, Incoming
Ext. No. / Floating Ext. No. (for Log-in/Log-out)
Specifies the floating extension number of an incoming call distribution group to log-in to or log-out 
from.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button 
						

							2.10 [4] Extension
PC Programming Manual 309
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
Ext. No. / Floating Ext. No. (for Hurry-up)
Specifies the floating extension number of the incoming call distribution group whose longest waiting 
call will be redirected (Manual Queue Redirection).
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Overflow No Answer
Feature Manual References
1.9.5 ICD Group Features—Queuing
Ext. No. / Floating Ext. No. (for Two-way Record)
Specifies the floating extension number of the VM (DPT) group containing the extensions mailbox.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
2.9.16 [3-7-2] VM(DPT) Group—Unit Settings
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
Ext. No. / Floating Ext. No. (for Two-way Transfer)
Specifies the floating extension number of the VM (DPT) group containing the desired mailbox. 
						

							2.10 [4] Extension
310 PC Programming Manual
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
2.9.16 [3-7-2] VM(DPT) Group—Unit Settings
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired mailbox.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.4 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
2.9.16 [3-7-2] VM(DPT) Group—Unit Settings
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings
Feature Manual References
1.19.4 Voice Mail DPT (Digital) Integration
1.19.5 Voice Mail DTMF Integration
Dial (for One-touch)
Specifies the number to be dialed. The PBX can have a maximum of 2000 One-touch Dialing buttons 
for extensions and DSS Consoles.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])