Panasonic Kx Taw848 Programing Manual

							2.1 Introduction
PC Programming Manual 21
Connect
Menu Option Initial Batch Interactive
UA I UA I UA I
RS-232C
USB
Modem
Profile Setup
Disconnect
Tool
Menu Option Initial Batch Interactive
UA I UA I UA I
SD memory backup
Simplified Voice Message→Delete All 
Recordings
Simplified Voice Message→Check Current 
Usage
Extension List View
Import→Feature - Speed Dial and Caller ID
Import→ARS - Leading Digit
Import→ARS - Except Code
Import→ARS - Routing Plan
Import→Wired Extension
Import→PS Extension
Import→Quick Dial (Basic)
Export→Feature - Speed Dial and Caller ID
Export→ARS - Leading Digit
Export→ARS - Except Code
Export→ARS - Routing Plan
Export→Wired Extension
Export→PS Extension 
						

							2.1 Introduction
22 PC Programming Manual
Export→Quick Dial (Basic)
System Data Convert
Utility
Menu Option Initial Batch Interactive
UA I UA I UA I
Diagnosis
File Transfer PC to PBX (SD Card)
File Transfer PBX (SD Card) to PC
SD Card File View and Load
SD Card File Delete
Message File Transfer PC to PBX
Message File Transfer PBX to PC
Error Log
CS Information
PS Information
System Reset→Reset by the Command
View
Menu Option Initial Batch Interactive
UA I UA I UA I
To o l b a r
Status Bar
System Menu
Window
Menu Option Initial Batch Interactive
UA I UA I UA I
Cascade Tool
Menu Option Initial Batch Interactive
UA I UA I UA I 
						

							2.1 Introduction
PC Programming Manual 23
2.1.3 Software Interface
This section explains the functions of the various elements of the software interface.
Main Window
The window of the Maintenance Console software is divided into several areas, as shown below:Tile(Horz)
Tile(Vert)
Help
Menu Option Initial Batch Interactive
UA I UA I UA I
Help
Additional Information
About Window
Menu Option Initial Batch Interactive
UA I UA I UA I 
						

							2.1 Introduction
24 PC Programming Manual
1. Menu Bar
Provides access to file management and connection options, as well as tools and utilities used in 
programming the PBX.
For details, see Sections 2.2 File to 2.6 Help.
2. Tool Bar
Provides easy access to commonly used software functions.
Two tool bars are provided, as follows:
File
Contains icons for creating, opening, and saving files. For details, see Sections 2.2.1 File—
New, 2.2.2 File—Open, and 2.2.4 File—Save.
123
45 6 
						

							2.1 Introduction
PC Programming Manual 25
Tools
Contains icons for backing up PBX data to the SD Memory Card, viewing extension 
information, and accessing Online Help. For details, see Sections 2.4.1 Tool—SD memory 
backup and 2.4.4 Tool—Extension List View.
These menus can be positioned freely. Click and drag the title bar of a menu to move it to another 
position. It will automatically snap in to position above, below, to the left, or to the right of the main 
window if released there. Otherwise, it will float separately from the main window.
Whether the tool bar is displayed or not can be chosen by selecting Toolbar from the View menu.
3. Tab Bar
The name of each screen currently open is displayed in a tab in this tab bar. When multiple screens 
are open at the same time, click on the tab of a screen to display the options associated with that 
screen.
4. System Menu
Provides access to the settings used for programming the PBX, grouped into 11 topics.
For details, see Sections 2.7 [1] Configuration to 2.16 [10] Maintenance.
To display the individual screens within a topic, click the topic heading. It will expand to show the sub-
topics.
 If a sub-topic contains more than one screen, clicking the name of the sub-topic will display 
the names of individual screens. Clicking an expanded sub-topic will hide the names of 
individual screens.
Double-click on a screen name to open that screen in 6. Main Screen below.
This menu can be positioned freely. Click and drag the title bar of the menu to move it to another 
position. It will automatically snap in to either the left side or right side of the main window if released 
there. Otherwise, it will float separately from the main window.
Whether the system menu is displayed or not can be chosen by selecting System Menu from the 
View menu.
5. Status Bar
The status bar displays information on the current state of the Maintenance Console.
Whether the status bar is displayed or not can be chosen by selecting Statusbar from the View 
menu.
The information displayed is as follows, in order from left to right:
Area Values Description
Program Mode Initial Mode
Batch Mode xxx
Interactive ModeSee 2.1.1 Starting Maintenance 
Console and Software Modes above.
xxx is replaced by the name of the 
current system data file.
PBX Type Type: TAW848 Displays the type of PBX being 
programmed.
Access Level Level : 
User
Administrator
InstallerDisplays the current access level, 
determined by the Programmer Code 
entered when starting Maintenance 
Console. See 2.1.2 Access Levels for 
more information. 
						

							2.1 Introduction
26 PC Programming Manual
6. Main Screen
Displays the screens selected from 4. System Menu above.
For details, see Sections 2.7 [1] Configuration to 2.16 [10] Maintenance.
Standard Buttons and Elements
There are several standard buttons that are displayed on many screens within the Maintenance 
Console.
The standard buttons are as follows:
In addition, many screens within the software display a small open folder icon ( ) beside lists of 
setting items. Clicking this icon will collapse part of the list, allowing other items to be displayed. The 
icon will change to a closed folder ( ).
Clicking the closed folder icon will expand the list again.
2.1.4 Card Status
Certain tools, utilities and settings require that the target card be set to out-of-service (OUS) or in-
service (INS) status before the operation is carried out. Where required, this is noted in the 
description of each item. Card status changes can only be performed when the software is in 
Interactive mode (see 2.1.1 Starting Maintenance Console and Software Modes).
 In service means that the card is installed correctly in the PBX, and is capable of being 
used normally. PBX System Data 
Ve r s i o nVersionxxx-xxx Displays the version number of the 
system software installed to the PBX.
The first 3 digits are the version number, 
and the last 3 digits are the revision 
number.
PBX Region Code Regionxxx-xxx Displays the region code assigned to the 
PBX and Maintenance Console.
The first 3 digits represent the region 
code assigned to the PBX, and the last 3 
digits represent the region code 
assigned to the Maintenance Console.
Button Function
OK Implements changes and closes the current screen.
Cancel Abandons changes and returns to the previous screen.
Close Keeps any changes implemented, and closes the current screen.
Apply Implements changes and remains on the same screen.
Refresh Implements changes, updates displayed data, and remains on the 
current screen.
Help Displays the relevant help topic for the current screen. Area Values Description 
						

							2.1 Introduction
PC Programming Manual 27
 Out of service means that the card is installed correctly in the PBX, but has been 
temporarily removed from use. This allows settings to be modified or software to be 
upgraded.
 Fault means that the card is not installed in the PBX correctly, or is not functioning correctly. 
For more information, see the Installation Manual.
For details about how to change the status of a card, see To change the status (INS/OUS) of a card 
(Interactive mode only) on screen 2.7.1 [1-1] Slot.
2.1.5 Display Options
The View and Window menus provide options to control the display of items within the Maintenance 
Console.
View
– Toolbar: Displays or hides the tool bar of commonly used buttons.
– Statusbar: Displays or hides the bar at the bottom of the Maintenance Console window.
– System Menu: Displays or hides the menu of PBX setting screens.
Window
– Cascade: When multiple data screens are open, displays all open screens overlapped, with 
the title bars visible.
– Tile(Horz): When multiple data screens are open, displays all open screens side by side.
– Tile(Vert): When multiple data screens are open, displays all open screens vertically.
2.1.6 Extension Number Setting
Many screens within the Maintenance Console software allow you to select extensions as part of 
programming various features (for example, as members of a group). These screens use a standard 
window to make selecting multiple extensions easy, accessed by clicking a button. This section 
explains how to use this Extension Number Setting window.
To select multiple extension numbers, select the type of extension to display, highlight the extensions 
you wish to add, then click the Add button. When finished, click OK. Data for the selected extensions 
will be added to the first free spaces on the original screen.
Extension Type
Selects the types of extension numbers to display in Extension Numbers & Names List. Multiple 
items can be selected. Items that are not available are shown with a grey checkbox.
Default
None selected.
Value Range
Wired Extension, Portable Station, VM Group(DPT), VM Group(DTMF), ICD Group, PS Ring Group, 
OGM(DISA), External Pager, Analog MODEM 
						

							2.1 Introduction
28 PC Programming Manual
Extension Numbers & Names List
Displays all available extensions of the types selected in Extension Type, and names. Click entries 
to select them, and click the Add button when finished, to add the selected extensions. To deselect 
an entry, click it again.
Default
Available extensions.
Value Range
Matching extensions
Available Column
Specifies which fields in the original form to add extension data to. For example, if both extension 
numbers and names can be entered in the original form, it is possible to specify that extension name 
data not be transferred, by deselecting that field here.
To select or deselect a field, click its name.
Default
First available field
Value Range
Available fields
Selected Extension List
Displays the extensions that have been selected to be added to member data. To remove an 
extension from this list, click it to select it and click Delete.
Default
Not stored.
Value Range
Selected extensions 
						

							2.2 File
PC Programming Manual 29
2.2 File
2.2.1 File—New
Creates a new system data file, used to program the PBX in Batch mode. All settings are in their initial 
or default state.
This option is only available at Installer level.
To upload the file created here to the SD memory card installed in the PBX, see 2.5.2 Utility—File 
Transfer PC to PBX (SD Card).
Note
Since selecting this option creates a blank system data file, uploading this file to the PBX will 
overwrite all previous settings. Use only when necessary.
To create a new system data file
1.
From the File menu, select New.
2.Click OK.
2.2.2 File—Open
Opens a system data file previously saved on the PC, and enters Batch mode.
When opening a file created with an older version of the Maintenance Console, you will be asked 
whether you want to conver t the data for use with the current version or not. Using the data without 
converting may result in some data being loaded to an incorrect destination, and is not 
recommended.
For more details regarding file conversion, see 2.4.7 Tool—System Data Convert.
If the file is not supported by the PBX (e.g. a system data file from an incompatible PBX), it will not 
be opened. The only files that can be opened are files that were created by the Maintenance Console 
for a supported PBX.
To upload a file opened here to the SD memory card installed in the PBX, see 2.5.2 Utility—File 
Transfer PC to PBX (SD Card).
To open a system data file
1.
From the File menu, select Open.
The Open dialog box will be displayed.
2.Navigate to the folder containing the system data file you want to open.
3.Select the file.
4.Click Open.
If the file was created with an older version of the Maintenance Console, you will be asked if you 
want to convert the data.
Click Ye s to convert the data for use with the current version of the Maintenance Console.
Enter a name for the new converted system file.
Click No to open the file as it is. 
						

							2.2 File
30 PC Programming Manual
2.2.3 File—Close
Closes the system data file that is currently being modified, and returns to Initial mode.
To close a system data file
 From the File menu, select Close.
If the system data file has not been saved, a warning message will be displayed, giving you the 
option to save the file.
Click Ye s to save the file.
Click No to abandon the changes.
2.2.4 File—Save
Overwrites the previously saved system data file with the system data currently being modified in 
Batch mode.
To upload a file saved here to the SD memory card installed in the PBX, see 2.5.2 Utility—File 
Transfer PC to PBX (SD Card).
To save a system data file
 From the File menu, select Save.
If the data has never been saved, the Save dialog box will be displayed. For more details, see 
2.2.5 File—Save As.
2.2.5 File—Save As
Saves the system data file being modified in Batch mode with the name chosen by the user.
To upload a file saved here to the SD memory card installed in the PBX, see 2.5.2 Utility—File 
Transfer PC to PBX (SD Card).
To save a system data file with a new name
1.
From the File menu, select Save As.
2.Navigate to the folder in which you want to save the file.
3.Enter a file name, or select a file to overwrite.
4.Click Save.
If choosing to overwrite another file, a warning message will be displayed.
Click Ye s to overwrite.
Click No to return to the previous screen.
2.2.6 File—Exit
Closes the Maintenance Console.
To exit the Maintenance Console
 From the File menu, select Exit.