Panasonic Kx Taw848 Programing Manual

							2.8 [2] System
PC Programming Manual 141
Programming Manual References
2.10.2 [4-1-2] Wired Extension—FWD/DND
2.10.9 [4-2-2] Portable Station—FWD / DND
Feature Manual References
1.6.6 FWD (Call Forwarding)
FWD No Answer Timer Set
Specifies the feature number used to set the length of time before a call is forwarded.
Default
*713
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.10.2 [4-1-2] Wired Extension—FWD/DND
2.10.9 [4-2-2] Portable Station—FWD / DND
Feature Manual References
1.6.6 FWD (Call Forwarding)
Group FWD Set / Cancel: Call from CO & Extension
Specifies the feature number used to set or cancel FWD for incoming CO line and intercom calls to 
an incoming call distribution group.
Default
*714
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Feature Manual References
1.6.6 FWD (Call Forwarding) 
						

							2.8 [2] System
142 PC Programming Manual
Group FWD Set / Cancel: Call from CO
Specifies the feature number used to set or cancel FWD for incoming CO line calls to an incoming 
call distribution group.
Default
*715
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Feature Manual References
1.6.6 FWD (Call Forwarding)
Group FWD Set / Cancel: Call from Extension
Specifies the feature number used to set or cancel FWD for incoming intercom calls to an incoming 
call distribution group.
Default
*716
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Feature Manual References
1.6.6 FWD (Call Forwarding)
Call Pickup Deny Set / Cancel
Specifies the feature number used to set or cancel Call Pickup Deny (i.e., preventing other extensions 
from picking up calls to your extension).
Default
*720 
						

							2.8 [2] System
PC Programming Manual 143
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Manual References
1.3.6 Call Pickup
Paging Deny Set / Cancel
Specifies the feature number used to set or cancel Paging Deny (i.e., preventing other extensions 
from paging your extension).
Default
*721
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.9.6 [3-4] Paging Group
Feature Manual References
1.13.1 Paging
Walking Extension
Specifies the feature number used to use the same extension settings at a new extension.
Default
*727
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None 
						

							2.8 [2] System
144 PC Programming Manual
Feature Manual References
1.20.2 Walking Extension
Data Line Security Set / Cancel
Specifies the feature number used to set or cancel Data Line Security (i.e., preventing signals from 
other extensions during data transmission).
Default
*730
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Manual References
1.4.1 Data Line Security
Call Waiting Mode: Manual Call Waiting for Extension Call
Specifies the feature number used to set or change the method of receiving a Call Waiting notification 
from an extension.
Default
*731
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Manual References
1.3.9 Call Waiting Tone
Call Waiting Mode: Automatic Call Waiting
Specifies the feature number used to set or cancel a Call Waiting notification from a CO line, 
doorphone, or a call via an incoming call distribution group. 
						

							2.8 [2] System
PC Programming Manual 145
Default
*732
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Manual References
1.3.9 Call Waiting Tone
Executive Override Deny Set / Cancel
Specifies the feature number used to set or cancel Executive Busy Override (i.e., preventing other 
extensions from joining your conversation).
Default
*733
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings—Extension Feature—Executive Busy Override
2.8.11 [2-7-1] Class of Service—COS Settings—Programming & Manager—Executive Busy Override 
Deny
Feature Manual References
1.5.3 Executive Busy Override
Not Ready (Manual Wrap-up) Mode On / Off
Specifies the feature number used to enter or leave Not Ready mode.
Default
*735
Value Range
Max. 4 digits (consisting of 0–9, *, and #) 
						

							2.8 [2] System
146 PC Programming Manual
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
Log-in / Log-out
Specifies the feature number used to join or leave an incoming call distribution group.
Default
*736
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
Feature Manual References
1.9.3 ICD Group Features—Log-in/Log-out
Hot Line (Pickup Dial) Program Set / Cancel
Specifies the feature number used to set/cancel the Hot Line feature, or program the number to be 
automatically dialed.
Default
*740
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Hot Line (Pickup Dial) Start
Feature Manual References
1.8.6 Hot Line 
						

							2.8 [2] System
PC Programming Manual 147
Absent Message Set / Cancel
Specifies the feature number used to set or cancel the display of an Absent Message.
Default
*750
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Manual References
1.1.1 Absent Message
BGM Set / Cancel
Specifies the feature number used to set or cancel the BGM heard through the telephone speaker 
while on-hook.
Default
*751
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.8.3 [2-2] Operator & BGM
Feature Manual References
1.2.1 BGM (Background Music)
Remote Timed Reminder (Remote Wakeup Call)
Specifies the feature number used to set or cancel a Timed Reminder remotely (Wake-up Call).
Default
*76*
Value Range
Max. 4 digits (consisting of 0–9, *, and #) 
						

							2.8 [2] System
148 PC Programming Manual
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Manual References
1.17.3 Timed Reminder
Timed Reminder Set / Cancel
Specifies the feature number used to set or cancel a Timed Reminder.
Default
*760
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Manual References
1.17.3 Timed Reminder
Printing Message
Specifies the feature number used to select a Printing Message to be output on SMDR.
Default
*761
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.12.9 [6-8] Hotel—Main—SMDR for External Hotel Application 2—Printing Message 1–8
Feature Manual References
1.13.9 Printing Message 
						

							2.8 [2] System
PC Programming Manual 149
Extension Dial Lock Set / Cancel
Specifies the feature number used to lock or unlock an extension to make certain CO line calls and 
change the forwarding destination, using the Extension Dial Lock feature.
Default
*77
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Manual References
1.5.4 Extension Dial Lock
Time Service (Day / Lunch / Break / Night) Switch
Specifies the feature number, available for manager extensions, used to change the time mode 
manually.
Default
*780
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings—Programming & Manager—Time Service Switch
2.8.11 [2-7-1] Class of Service—COS Settings—Programming & Manager—Manager
Feature Manual References
1.17.4 Time Service
Remote Extension Dial Lock Off
Specifies the feature number, available for manager extensions, used to unlock other extensions 
using the Extension Dial Lock feature.
Default
*782 
						

							2.8 [2] System
150 PC Programming Manual
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings—Programming & Manager—Manager
Feature Manual References
1.5.4 Extension Dial Lock
Remote Extension Dial Lock On
Specifies the feature number, available for manager extensions, used to lock other extensions using 
the Extension Dial Lock feature.
Default
*783
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings—Programming & Manager—Manager
Feature Manual References
1.5.4 Extension Dial Lock
Extension Feature Clear
Specifies the feature number used to reset certain features of an extension to the default values.
Default
*790
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None