Panasonic Aj Lt95 Operating Instructions Manual

							The underlining indicates the factory setting.500 VITC BLANK
0000
0001
BLANK
THRU
This selects whether to output the VITC signal at the positions
which have been set by setup menu item No.501 (VITC POS-1)
and No.502 (VITC POS-2).
0: The VITC signal is not output.
1: The VITC signal is output.
[[
503 TCG REGEN
0000
0001
0002TC&UBTC
UBThis selects the signal to be regenerated when the TCG (time
code generator) is in the regeneration mode.
0: Both the time code and user’s bit are regenerated.
1: Only the time code is regenerated.
2: Only the user’s bit is regenerated.[[
504 REGEN MODE
0000
0001
0002
0003AS&INASSEM
INSRT
SWThis selects when the time code is to be regenerated during
automatic editing (assemble editing or insert editing).
0: The time code is regenerated in assemble editing or insert
editing.
1: The time code is regenerated in assemble editing.
2: The time code is regenerated in insert editing.
3: The time code regeneration accords with the REGEN/PRESET
switch position.[
501 VITC POS-1
(525i mode)0000
0006
001010L
16L
20LThis selects the position where the VITC signal is inserted.

The same line as the one selected by setup menu item No.502
(VITC POS-2) cannot be set.
[[
(625i mode) 0000
0004
00157L
11L
22L
502 VITC POS-2
(525i mode)0000
0008
001010L
18L
20LThis selects the position where the VITC signal is inserted.

The same line as the one selected by setup menu item No.501
(VITC POS-1) cannot be set.
[[
(625i mode) 0000
0006
00157L
13L
22L Item Setting
No.Superimposed
display No.Superimposed
display Description of setting
V
T
R
1V
T
R
2
41
Setup menus
TIME CODE menu 
						

							The underlining indicates the factory setting.
511 VITC OUT
0000
0001SBCVAUXThis selects the method used to output the VITC which is
superimposed onto the output video signal.
0: During recording:
The input time code set by setup menu item No.570 (REGEN
SEL) or the TC generator switch is output as the VITC.
During playback:
The time code recorded in the SBC area is output as VITC.
1: During recording:
The time code detected from among the input video signals is
output as VITC.
During playback:
The time code recorded in the VAUX area is output as VITC.

The time code detected from among the input video signals is
automatically output as VAUX when pictures are recorded.[[ 509 DF MODE
0000
0001DFNDFThis selects the CTL and TCG drop frame mode.
0: For operation in the drop frame mode.
1: For operation in the non-drop frame mode.

In the 625i mode, this setup menu item does not appear.[[ 508 TCG CF FLAG
0000
0001OFFONThis selects the color framing flag into the TCG.
0: The color framing flag is set to OFF.
1: The color framing flag is set to ON.[[
570 REGEN SEL
0000
0001
0002
0003I-REGE-VITC
E-LTC
VTR1TCThis selects whether the internal TCG or external time code is to
be used when the REGEN/PRESET switch has been set to the
REGEN position.
0: The internal TC is used in the regeneration mode.
1: The input video signal VITC is used in the regeneration mode.
2: The LTC in the TC input is used in the regeneration mode.
3: The sub-code TC is used in the regeneration mode when the
OPERATION MODE switch is set to INT.

The VTR1 TC can be set only on the VTR2 side.[[ 507 PHASE CORR This selects whether the phase correction for the LTC generated
by the TCG is to be controlled.
0: Phase correction is not controlled.
1: Phase correction is controlled.[[ 506 BINARY GP
0000
0001
0002
0003
0004
0005
0006
0007000001
010
011
100
101
110
111This selects the usage status of the user’s bit in the time code
generated by the TCG.
0: Not specified (character set is not specified).
1: ISO characters (8-bit character set complying with ISO646,
ISO2022) 
2: Unassigned 1 (not defined)
3: Unassigned 2 (not defined)
4: Unassigned 3 (not defined)
5: Page/line
6: Unassigned 4 (not defined)
7: Unassigned 5 (not defined)[[
0000
0001OFFON Item Setting
No.Superimposed
display No.Superimposed
display Description of setting
V
T
R
1V
T
R
2
42
Setup menus
TIME CODE menu 
						

							The underlining indicates the factory setting.
573 TC PRESET This selects the time code value of the internal TCG.
00:00:00:00 to 23:59:59:29 (525i mode)
00:00:00:00 to 23:59:59:24 (625i mode)
[[
574 UB PRESET This selects the user’s bit value of the internal TCG.
00:00:00:00 to FF:FF:FF:FF[[ 572 V-MON/TC OUT This selects whether the video monitor output connector is to be
used as the TC output connector.
When it is to be used as the TC output connector, whether the
phase of the TC signal which is output in the E-E mode is to be
aligned with the video output or input TC is also selected.
0: The connector is used as the video monitor output connector.
1: The connector is used as the TC output connector, and in the
E-E mode the output TC signal phase is aligned with the input
TC signals.
2: The connector is used as the TC output connector, and in the
E-E mode the output TC signal phase is aligned with the output
video signals.

The TCOUT2 can be set only on the VTR2 side.[[ 571 TC JUMP
0000
0001
0002
0003OFFVTR1
VTR2
ALLThis selects the setting for TC jumping.
0: No TC jumping.
1: TC jumping on the VTR1 side only.
2: TC jumping on the VTR2 side only.
3: TC jumping on both the VTR1 and VTR2 sides.

During TC jumping, the tape is cued up to the IN point and then,
using the CTL value of the IN point as a reference, the tape is
prerolled or run up.
When edit recording mode is initiated after the IN point has been
passed through, the unit switches to the TC reference.[
0000
0001
0002V-MONTCOUT1
TCOUT2 Item Setting
No.Superimposed
display No.Superimposed
display Description of setting
V
T
R
1V
T
R
2
43
Setup menus
TIME CODE menu 
						

							The underlining indicates the factory setting.601 OUT VSYNC
0000
0001N-VFVFThis selects whether to float the video signal phase at the V sync
position of the video signals in order to align it with the input in the
E-E mode or during recording or editing.
0: The phase is floated.
1: The phase is not floated.
602 V-MUTE SEL
0000
0001
N-MUTELOW_RFThis selects whether to mute the video output signals when a
blank has been detected on the tape during playback.
0: No muting (screen is frozen).
1: Muting (screen is turned black).
603 CC (F1) BLANK
0000
0001
BLANK
THRU
This selects ON or OFF for the closed caption signal of the first
field.
0: Signal is forcibly blanked.
1: Signal is not blanked.

In the 625i mode, this setup menu item does not appear.
604 CC (F2) BLANK
0000
0001
BLANK
THRU
This selects ON or OFF for the closed caption signal of the
second field.
0: Signal is forcibly blanked.
1: Signal is not blanked.

In the 625i mode, this setup menu item does not appear.
605 FREEZE SEL
0000
0001FIELDFRAMEThis selects the freeze status of the still pictures.
0: Field freeze.
1: Frame freeze.

When frame freeze is set, the tape is played back in the slow
mode in 1-frame increments even during slow playback.
611 INPUT C KILL
0000
0001B/W
AUTOThis selects the color killer processing for the video input signals.
0: The video input signals are forcibly subjected to monochrome
processing.
1: The video input signals are automatically processed. 609 EDH
0000
0001
OFF
ON
This selects whether to insert the error information into the serial
output.
0: The error information is not inserted.
1: The error information is inserted.
[[
[[
[[
[[
[
[[
610 Pb/Pr IN LV
0000
0001MII
B-CAMThis selects the analog component input level.
0: M IIlevel.
1:ß-cam level

In the 625i mode, this setup menu item does not appear.[[ [[ Item Setting
No.Superimposed
display No.Superimposed
display Description of setting
V
T
R
1V
T
R
2
44
Setup menus
VIDEO menu 
						

							614 Pb/Pr OUT LV
0000
0001MII
B-CAMThis selects the analog component output level.
0: M IIlevel.
1:ß-cam level

In the 625i mode, this setup menu item does not appear.
618 INTERPOLATE
0000
0001
OFF
AUTO
During slow playback, the interpolation function for the vertical
signals is automatically activated to reduce the vertical movement
of the playback pictures.  However, this function can be forcibly
turned off using this setting.
0: The function is forcibly turned off.
1: The function is automatically turned on during slow playback.
[[
[ Item Setting
No.Superimposed
display No.Superimposed
display Description of setting
V
T
R
1V
T
R
2
The underlining indicates the factory setting.[[
[[
[[
[[
[[ 622 SETUP 25 For setting 7.5% setup processing to be performed on input and
output signals in the 25 Mbps mode. 
(The 00, 01, 02 and 03 settings on the submenu can be displayed
by pressing the STILL button.  To return to this menu from the
submenu, press the STILL button again.)

In the 625i mode, this setup menu item does not appear.
00 CMPST IN
0000
0001
THRU
CUT
This selects the 7.5% setup processing for the input composite
signal.
0: The signal is recorded in its original form.
1: The signal is recorded with the 7.5% setup removed.
01 CMPST OUT
0000
0001
THRU
ADD
This selects the 7.5% setup processing for the output composite
signal.
0: The signal is output in its original form.
1: The signal is output with the 7.5% setup added.

Bear in mind the setting selected for submenu item No.03
(CMPNT OUT).
02 CMPNT IN
0000
0001THRUCUTThis selects the 7.5% setup processing for the input component
signal.
0: The signal is recorded in its original form.
1: The signal is recorded with the 7.5% setup removed.
03 CMPNT OUT
0000
0001THRUCUTThis selects the 7.5% setup processing for the output composite,
component and serial digital signal.
0: The signal is output in its original form.
1: The signal is output with the 7.5% setup removed.
45
Setup menus
VIDEO menu 
						

							The underlining indicates the factory setting.
643 INT WIDE I
0000
0001
OFF
ON
This selects how the VTR1 wide-screen information is to be used
for detecting the VTR2 wide-screen information while AUTO has
been selected as the setup menu item No.641 setting when the
internal connections (INT mode) apply.
0: The information is not handled as wide-screen information.
1: The information is handled as wide-screen information.[ 641 WIDE IN SEL
0000
0001
0002AUTOWIDE
NORMALThis selects the wide-screen information which is to be written on
the tape during recording.
0: The setting for the tape in VTR2 complies with the wide-screen
information of VTR1 with internal connections (INT mode) if ON
has been selected as the setup menu item No.643 (INT WIDE I)
setting.
Alternatively, if OFF has been selected, the information is
forcibly recorded on the tape as the normal mode.  It is also
forcibly recorded on the tape as the normal mode when the
OPERATION MODE switch has been set to EXT or
SEPARATE.
In terms of the tape in VTR1, the information is forcibly recorded
as the normal mode.
1: The information is recorded on the tape forcibly as the wide
mode.
2: The information is recorded on the tape forcibly as the normal
mode.

OThe wide-screen information on the SDI signal cannot be
detected.
OIn the wide-screen mode, “W” lights on the display tube.
[[ Item Setting
No.Superimposed
display No.Superimposed
display Description of setting
V
T
R
1V
T
R
2
[[
[[
[[
[[
[[ 623 SETUP 50 For setting 7.5% setup processing to be performed on input and
output signals in the 50 Mbps mode. 
(The 00, 01, 02 and 03 settings on the submenu can be displayed
by pressing the STILL button.  To return to this menu from the
submenu, press the STILL button again.)

In the 625i mode, this setup menu item does not appear.
00 CMPST IN
0000
0001
THRU
CUT
This selects the 7.5% setup processing for the input composite
signal.
0: The signal is recorded in its original form.
1: The signal is recorded with the 7.5% setup removed.
01 CMPST OUT
0000
0001
THRU
ADD
This selects the 7.5% setup processing for the output composite
signal.
0: The signal is output in its original form.
1: The signal is output with the 7.5% setup added.

Bear in mind the setting selected for submenu item No.03
(CMPNT OUT).
02 CMPNT IN
0000
0001THRUCUTThis selects the 7.5% setup processing for the input component
signal.
0: The signal is recorded in its original form.
1: The signal is recorded with the 7.5% setup removed.
03 CMPNT OUT
0000
0001THRUCUTThis selects the 7.5% setup processing for the output composite,
component and serial digital signal.
0: The signal is output in its original form.
1: The signal is output with the 7.5% setup removed.
46
Setup menus
VIDEO menu 
						

							Item Setting
No.Superimposed
display No.Superimposed
display Description of settingV
T
R
1V
T
R
2
The underlining indicates the factory setting.701 CH1 IN LV 0000
0001
0002
00034dB
0dB–3dB
–20dBThis selects the audio input (CH1) reference level.
702 CH2 IN LV 0000
0001
0002
0003
00044dB
0dB–3dB
–20dB
–60dBThis selects the audio input (CH2) reference level.
703 CH3 IN LV 0000
0001
0002
00034dB
0dB–3dB
–20dBThis selects the audio input (CH3) reference level.
704 CH4 IN LV 0000
0001
0002
00034dB
0dB–3dB
–20dBThis selects the audio input (CH4) reference level.
[
[
[
[
706 CH1 OUT LV 0000
0001
0002
00034dB
0dB–3dB
–20dBThis selects the audio output (CH1) reference level.
[
707 CH2 OUT LV 0000
0001
0002
00034dB
0dB–3dB
–20dBThis selects the audio output (CH2) reference level.
[
708 CH3 OUT LV 0000
0001
0002
00034dB
0dB–3dB
–20dBThis selects the audio output (CH3) reference level.
[
709 CH4 OUT LV 0000
0001
0002
00034dB
0dB–3dB
–20dBThis selects the audio output (CH4) reference level.
[
47
Setup menus
The underlining indicates the factory setting.
670 V IN SEL
0000
0001CMPSTCMPNTThis selects the video input.
0: Analog composite input
1: Analog component input

Analog video signals cannot be input in the 625i mode.[[
671 V OUT SEL
0000
0001CMPSTCMPNTThis selects the video output.
0: Analog composite output
1: Analog component output[[ Item Setting
No.Superimposed
display No.Superimposed
display Description of setting
V
T
R
1V
T
R
2
VIDEO menu
AUDIO menu 
						

							The underlining indicates the factory setting.714 EMPHASIS 0000
0001OFFONThis selects emphasis for the audio signals.
726 REC CUE
0000
0001
0002
0003
0004
0005CH1
CH2
CH1+2CH3
CH4
CH3+4This selects the input signals to be recorded on the cue track.
0: Audio CH1 input signals
1: Audio CH2 input signals
2: Audio CH1 and CH2 mixed signals
3: Audio CH3 input signals
4: Audio CH4 input signals
5: Audio CH3 and CH4 mixed signals
727 PB FADE
0000
0001
0002AUTOCUT
FADEThis selects the audio edit point (IN and OUT) processing during
playback.
0: The processing complies with the status set for recording.
1: Cut processing is forcibly initiated.
2: Fade processing is forcibly initiated.
728 EMBEDDED AUD
0000
0001OFF
ONThis selects whether to embed the audio data in the serial output.
0: The audio data is not embedded.
1: The audio data is embedded.
[[
[[
[[
[
731 CUE OUT SEL
0000
0001OFFONThis selects whether the cue audio signal is to be output to the
main system output in the search mode.
0: The cue audio signal is not output.
1: The cue audio signal is output.[[
732 CUE SLOW
0000
0001STEPLINEARThis selects the tape travel mode (cue track playback mode)
during slow playback.
0: The output pictures are given priority, and step feed is
performed.
1: Cue track playback is given priority, and the tape travels in the
linear mode.

When “1: LINEAR” has been set:
OSet the TC/CTL switch to TC.  The CTL counter may not
operate properly.
OThe picture may not appear as clearly as in the step mode.[[ Item Setting
No.Superimposed
display No.Superimposed
display Description of setting
V
T
R
1V
T
R
2
48
Setup menus
AUDIO menu 
						

							The underlining indicates the factory setting.770 CUE INSERT
0000
0001OFFONThis selects whether to record signals onto the cue track in the
audio insert mode
0: No signals are recorded on the cue track, and the already
recorded signals are left on the track.
1: Signals are recorded on the cue track.
771 AUDIO SLOW
0000
0001
0002PCMCUE
A-CUEThis selects the audio output mode during slow playback.
0: PCM mode
PCM sound is output at speeds from –0.43a
to +1a
, and the
cue sound is output at all other speeds.
1: CUE mode
PCM sound is output at the FWD 1a
speed, and the cue sound
is output at all other speeds.
2: ALL CUE mode
Cue sound is output at all speeds including the FWD 1a
speed.
772 AUTO MONI
0000
0001V1+V2AUTOThis selects the signal which is to be output to the speakers or
headphones.
0: The signal complies with the AUDIO MONITOR SELECT switch
setting.
1: The signals of the VTR selected by the VTR1/VTR2 button are
output.
In the VTR1/VTR2 simultaneous operation mode, the VTR1
signals are output to the left channel and the VTR2 signals are
output to the right channel.

OThe setting is fixed at V1+V2 when the OPERATION MODE
switch is set to SEPARATE.
OThe setting is fixed at V1+V2 when the CONTROL switch is set
to REMOTE or EXT VTR.
[
[[
[
773 PB AUDIO SEL
0000
0001TR1/2TR3/4This selects the playback tracks when the ANALOG AUDIO OUT
switch is set to “V1•V2.”
(This setting takes effect in the 50 Mbps mode.)
0: The sound recorded on tracks 1 and 2 is played back.
1: The sound recorded on tracks 3 and 4 is played back.[[ Item Setting
No.Superimposed
display No.Superimposed
display Description of setting
V
T
R
1V
T
R
2
49
Setup menus
AUDIO menu 
						

							The underlining indicates the factory setting.B00 LCD MODE
0000
0001
0002AUTOWIDE
NORMALThis selects the LCD monitor screen displays.
0: During playback, the displays comply with the information on
the recorded tape.
During E-E (recording, etc.), they comply with the mode which
has been set by setup menu items No.641 and No.643.
1: The displays are forcibly set to the wide-screen (16:9) mode.
2: The displays are forcibly set to the normal (4:3) mode.
B01 LCD HUE 0000
0030
0060–30
0
30This is used to adjust the LCD monitor hue.

In the 625i mode, this setup menu item does not appear.
B02 LCD COLOR 0000
0030
0060–30
0
30This is used to adjust the LCD monitor color.
[[
[[
[[ Item Setting
No.Superimposed
display No.Superimposed
display Description of setting
V
T
R
1V
T
R
2
50
Setup menus
LCD menu