Panasonic Aj Lt95 Operating Instructions Manual

AJ-P
Operating Instructions
Lap-Top Editor
F0500W @ Printed in Japan
VQT8648P
Use the dedicated AJ-B95 AC adapter. 

2
indicates safety information.
IMPORTANT
“Unauthorized recording of copyrighted
television programs, video tapes and other
materials may infringe the right of copyright
owners and be contrary to copyright laws.”
$Do not insert fingers or any objects into the video
cassette holder.
$Avoid operating or leaving the unit near strong magnetic
fields. Be especially careful of large audio speakers.
$Avoid operating or storing the unit in an excessively hot,
cold, or damp environment as this may result in...

3
Contents
Features  . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Opening and closing the top panel  . . . . .6
Parts and their functions  . . . . . . . . . . . . .7
Panel control area  . . . . . . . . . . . . . . . . . . . . . . . . .7
Counter display area  . . . . . . . . . . . . . . . . . . . . . . .9
Panel switch area  . . . . . . . . . . . . . . . . . . . . . . . .12
Audio control area  . . . . . . . . . . . . . . . . . . . . . . . .14
Editing operation area  . . . . . . . . . . . . . . ....

4
Contents
Sending (DUMP)and loading (LOAD)edit
data to an external component  . . . . . . .81
Superimposed screen  . . . . . . . . . . . . . . .85
Error messages  . . . . . . . . . . . . . . . . . . . .86
Video head cleaning  . . . . . . . . . . . . . . . .88
Condensation  . . . . . . . . . . . . . . . . . . . . .88
Maintenance . . . . . . . . . . . . . . . . . . . . . . .88
Specifications  . . . . . . . . . . . . . . . . . . . . .89 

5
Features
Compact size and light weight
This editor is an integrated editing system which
delivers two DVCPRO 50 digital VTRs, an editing
controller, two LCD monitors and speakers in a single
unit.  It features a compact, lightweight and portable
design which enables it to be easily carried around
and readily utilized for editing work on an office desk,
etc.
Cut editing
This unit is capable of both assemble editing and
insert editing.  With insert editing, the signals of each
of 4 audio channels can be...

6
Opening the top panel
Opening and closing the top panel
Closing the top panel
1Pull the top part of the lever forward to release the
lock.1Push the top panel down to close it and engage
the bottom part of the lever.
2With the bottom part of the lever now engaged,
push up the top part of the lever to lock it.2Clasp both sides of the top panel, and lift the panel
to open it.

Do not try to lift the panel by pushing the lever up.

Take care not to pinch your fingers when opening or
closing the top panel. 

7
Panel control area
1
Audio monitor speakers
The sound of the VTR1 (or VTR2) signals to be
monitored is delivered through the VTR1 (or VTR2)
speaker.
Depending on the positions selected for the AUDIO
MONITOR SELECT switches, VTR1 or VTR2
sound is selected and output.
2
LCD switch
This functions as the LCD monitor power switch,
and it also selects the brightness of the display’s
backlight.
LIGHT:For increasing the display’s backlight
brightness.
DARK:For reducing the display’s backlight
brightness....

8
Panel control area
5
METER button
While this is held down, the audio level meter is set
to the fine mode.  (See page 10)
6
RESET button
Used to reset the CTL counter.
7
COUNTER switch
CTL:The CTL pulse count after resetting is shown
on the counter display area.  It is reset by the
RESET button.
TC:The time code which has been read out is
displayed.  It is not reset even if the RESET
button is pressed.
UB:The user’s bit of the time code which has been
read out is displayed.
8
EJECT button
Press this to...

9
Counter display area
1
“Cassette inside” display
This lights when a cassette has been inserted.
It flashes when the unit is in the STANDBY OFF
mode.
2
INPUT SCH lamp
INPUT lights when video signals have been
supplied from an external source.
SCH also lights when the SC-H (subcarrier to
horizontal) phase matches and analog composite
signals are input.
3
REF SCH lamp
REF lights when the reference signal has been
supplied to the REF VIDEO IN connector.
SCH also lights when the SC-H phase matches and
the...

10
Counter display area
<
TOTAL lamp
This lights when the total editing time is displayed.
=
REMAIN lamp
This lights when the remaining tape amount is
displayed.
>
W lamp
This lights in the wide-screen mode.
?
DF lamp
This lights in the drop frame mode.
@
CTL lamp
This lights when the time counter serves as the
CTL counter.
A
TC lamp
This lights when the time counter shows the time
code.
B
UB lamp
This lights when the time counter shows the user’s
bit.
C
Time counter displayD
Audio level meter
Parts and...