Panasonic Aj Lt95 Operating Instructions Manual

The underlining indicates the factory setting.500 VITC BLANK
0000
0001
BLANK
THRU
This selects whether to output the VITC signal at the positions
which have been set by setup menu item No.501 (VITC POS-1)
and No.502 (VITC POS-2).
0: The VITC signal is not output.
1: The VITC signal is output.
[[
503 TCG REGEN
0000
0001
0002TC&UBTC
UBThis selects the signal to be regenerated when the TCG (time
code generator) is in the regeneration mode.
0: Both the time code and user’s bit are regenerated.
1: Only the...

The underlining indicates the factory setting.
511 VITC OUT
0000
0001SBCVAUXThis selects the method used to output the VITC which is
superimposed onto the output video signal.
0: During recording:
The input time code set by setup menu item No.570 (REGEN
SEL) or the TC generator switch is output as the VITC.
During playback:
The time code recorded in the SBC area is output as VITC.
1: During recording:
The time code detected from among the input video signals is
output as VITC.
During playback:
The time...

The underlining indicates the factory setting.
573 TC PRESET This selects the time code value of the internal TCG.
00:00:00:00 to 23:59:59:29 (525i mode)
00:00:00:00 to 23:59:59:24 (625i mode)
[[
574 UB PRESET This selects the user’s bit value of the internal TCG.
00:00:00:00 to FF:FF:FF:FF[[ 572 V-MON/TC OUT This selects whether the video monitor output connector is to be
used as the TC output connector.
When it is to be used as the TC output connector, whether the
phase of the TC signal which is output...

The underlining indicates the factory setting.601 OUT VSYNC
0000
0001N-VFVFThis selects whether to float the video signal phase at the V sync
position of the video signals in order to align it with the input in the
E-E mode or during recording or editing.
0: The phase is floated.
1: The phase is not floated.
602 V-MUTE SEL
0000
0001
N-MUTELOW_RFThis selects whether to mute the video output signals when a
blank has been detected on the tape during playback.
0: No muting (screen is frozen).
1: Muting...

614 Pb/Pr OUT LV
0000
0001MII
B-CAMThis selects the analog component output level.
0: M IIlevel.
1:ß-cam level

In the 625i mode, this setup menu item does not appear.
618 INTERPOLATE
0000
0001
OFF
AUTO
During slow playback, the interpolation function for the vertical
signals is automatically activated to reduce the vertical movement
of the playback pictures.  However, this function can be forcibly
turned off using this setting.
0: The function is forcibly turned off.
1: The function is automatically...

The underlining indicates the factory setting.
643 INT WIDE I
0000
0001
OFF
ON
This selects how the VTR1 wide-screen information is to be used
for detecting the VTR2 wide-screen information while AUTO has
been selected as the setup menu item No.641 setting when the
internal connections (INT mode) apply.
0: The information is not handled as wide-screen information.
1: The information is handled as wide-screen information.[ 641 WIDE IN SEL
0000
0001
0002AUTOWIDE
NORMALThis selects the wide-screen...

Item Setting
No.Superimposed
display No.Superimposed
display Description of settingV
T
R
1V
T
R
2
The underlining indicates the factory setting.701 CH1 IN LV 0000
0001
0002
00034dB
0dB–3dB
–20dBThis selects the audio input (CH1) reference level.
702 CH2 IN LV 0000
0001
0002
0003
00044dB
0dB–3dB
–20dB
–60dBThis selects the audio input (CH2) reference level.
703 CH3 IN LV 0000
0001
0002
00034dB
0dB–3dB
–20dBThis selects the audio input (CH3) reference level.
704 CH4 IN LV 0000
0001
0002
00034dB
0dB–3dB...

The underlining indicates the factory setting.714 EMPHASIS 0000
0001OFFONThis selects emphasis for the audio signals.
726 REC CUE
0000
0001
0002
0003
0004
0005CH1
CH2
CH1+2CH3
CH4
CH3+4This selects the input signals to be recorded on the cue track.
0: Audio CH1 input signals
1: Audio CH2 input signals
2: Audio CH1 and CH2 mixed signals
3: Audio CH3 input signals
4: Audio CH4 input signals
5: Audio CH3 and CH4 mixed signals
727 PB FADE
0000
0001
0002AUTOCUT
FADEThis selects the audio edit point (IN and...

The underlining indicates the factory setting.770 CUE INSERT
0000
0001OFFONThis selects whether to record signals onto the cue track in the
audio insert mode
0: No signals are recorded on the cue track, and the already
recorded signals are left on the track.
1: Signals are recorded on the cue track.
771 AUDIO SLOW
0000
0001
0002PCMCUE
A-CUEThis selects the audio output mode during slow playback.
0: PCM mode
PCM sound is output at speeds from –0.43a
to +1a
, and the
cue sound is output at all other...

The underlining indicates the factory setting.B00 LCD MODE
0000
0001
0002AUTOWIDE
NORMALThis selects the LCD monitor screen displays.
0: During playback, the displays comply with the information on
the recorded tape.
During E-E (recording, etc.), they comply with the mode which
has been set by setup menu items No.641 and No.643.
1: The displays are forcibly set to the wide-screen (16:9) mode.
2: The displays are forcibly set to the normal (4:3) mode.
B01 LCD HUE 0000
0030
0060–30
0
30This is used to...