Nvidia 3d Vision 2 User Guide
Have a look at the manual Nvidia 3d Vision 2 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 9 Nvidia manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
48nV IDI a 3D V I sIon U seR GUID e changes, voltage fluctuations and flicker in public low- voltage supply systems, for equipment with rated current ≤ 16a per phase and not subject to conditional connection) Underwriters Laboratories (UL/cUL, CB Scheme) Ul- Under writers l aboratories >Ul 60950-1, 2nd e dition, 2007-03-27: Information technology equipment - safety - Par t 1: General requirement >Csa C22.2 n o. 60950-1-07, 2nd e dition, 2007-03: Information Technology equipment - s afety - Par t1: General requirement >Ie C 60950-1:2005 ( second e dition): Information technology equipment – s afety – Par t 1: General requirement IEC 60950-1:2001: IN fORmaTIO Use with U l listed I.T. e. only 07
ImPoRT an T s afe T Y Info Rma TIon49 Imp ORT aNT Saf ETy INfORma TION Preface nVIDI a products are designed to operate safely when installed and used according to the product instructions and general safety practices. The guidelines included in this document explain the potential risks associated with computer operation and provide important safety practices designed to minimize these risks. b y carefully following the information contained in this document and the specific instructions provided with your product, you can protect yourself from hazards and create a safer computer work environment. The product is designed and tested to meet I eC-60950-1, the s tandard for the safety of Information Technology e quipment. This also covers the national implementation of IeC-60950-1 based safety standards around the world e.g. U l-60950-1. These standards reduce the risk of injur y from the following hazards: >Electric shock: Hazardous voltage levels contained in par ts of the product >Fire: o verload, temperature, material flammability >Mechanical: sharp edges, moving parts, instability >Energy: Circuits with high energy levels (240 volt amperes) or potential as burn hazards >Heat: a ccessible par ts of the product at high temperatures >Chemical: Chemical fumes and vapors 08
50nV IDI a 3D V I sIon U seR GUID e >Radiation: noise, ionizing, laser, ultrasonic waves Retain and follow all product safety and operating instructions. always refer to the documentation supplied with your equipment. o bser ve all warnings on the product and in the operating instructions. WARNING: Failure to follow these safety instructions could result in fire, electric shock or other injur y or damage. WARNING: Electrical equipment can be hazardous if misused. Operation of this product, or similar products, must always be super vised by an adult. Do not allow children access to the interior of any electrical product and do not permit them to handle any cables. Safety Symbols To reduce the risk of bodily injur y, electric shock, fire, and damage to the equipment, obser ve the safety labels included on the equipment. Symbols on Equipment SignMeaning This symbol in conjunction with any of the following symbols indicates the presence of a potential hazard. The potential for injur y exists if warnings are not obser ved. Consult your documentation for specific details. This symbol indicates the presence of hazardous energy circuits or electric shock hazards. Refer all ser vicing to qualified personnel. W aR n In G: To reduce the risk of injur y from electric shock hazards, do not open this enclosure. Refer all maintenance, upgrades, and ser vicing to qualified personnel. This symbol indicates the presence of electric shock hazards. The area contains no user or field ser viceable par ts. Do not open for any reason. W aR n In G: To reduce risk of injur y from electric shock hazards, do not open this enclosure. 08
ImPoRT an T s afe T Y Info Rma TIon51 General Precautions To reduce the risk of personal injur y or damage to the equipment: >follow all cautions and instructions marked on the equipment. Do not attempt to defeat safety interlocks (where provided). >D o not bend, drop, crush, puncture, incinerate, or open glasses or IR emitter. >Do not perform installation, maintenance, or reconfiguration of this product during an electrical storm. >n ever turn on any equipment when there is evidence of fire, water, or structural damage. >Place the product away from radiators, heat registers, stoves, amplifiers, or other products that produce heat. >Take care no T to spill any food or liquid onto the glasses or IR emitter. In the event that the par ts do get wet, unplug all cables before cleaning. a llow the equipment to dr y thoroughly before turning it on again. >never force a connector into a por t. Check for obstructions on the port. >avoid inser ting foreign objects through openings in the product. >Do not inser t foreign objects through openings in the product. >Do not make mechanical or electrical modifications to the equipment. >To clean the glasses, use a soft, slightly damp, lint free cloth. a void getting moisture in openings. Do not use window cleaners, household cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives to clean glasses. >If the product sustains damage requiring ser vice, disconnect the product from the computer or U sb charging adapter and refer ser vicing to an nVIDIa authorized ser vice provider. >as with any electronic equipment, dispose of glasses and IR emitter properly. >When the IR emitter is operating, it is normal for it to be warm to the touch. When charging the wireless glasses, the batter y compar tment may feel warm. >If you use a U sb power adapter to charge the wireless glasses, read the specifications carefully. m ake sure the power adapter is Usb compliant.
52nV IDI a 3D V I sIon U seR GUID e >There is a lithium batter y in your wireless glasses. You can recharge the batter y whenever it is convenient. l ike all lithium batteries, it will slowly age. after a while it will lose the capability to be charged to it's full capacity. The degradation is slow and will var y depending on your use and recharging habits. >operating and storing the glasses outside the recommended temperature range can lead to temporar y or even permanent damage to the batter y of wireless glasses and lenses of glasses. >Do not disassemble your glasses or the emitter box under any circumstances. Do not remove the batter y from the wireless glasses or any par ts in the glasses or IR emitter. You run the risk of electric shock and voiding the warranty. WARNING: Your wireless 3D glasses contain sensitive components including a rechargeable battery. Prevent damage by making sure you do not drop, bend, or crush your stereo glasses or drop into fire. WARNING: The lithium ion batter y in the wireless 3D Glasses are a custom design. Do NOT attempt to open the batter y compartment or replace the battery. Contact NVIDIA or an NVIDIA approved ser vice provider if you suspect your bat-tery is faulty. Ambient Temperatures >Operating temperature: Recommended range is 5°C to 40°C ( 41°f to 104°f). >Storage temperature: The recommended storage temperature range is -10°C to 45°C(14°ft o 113°f ). Do not leave 3D Vision system in your car, because temperatures in parked cars can exceed this range. Infrared device safety CL ASS 1 LED PRODUCT The IR Wireless e mitter includes Infrared light - emitting diodes for transmitting signals from the IR Wireless e mitter to the wireless glasses. although this invisible beam is not considered harmful, and complies with en 60825-1 (IeC60825-1), we recommend the following precaution: when the Infrared device is transmitting: >Do not stare into the Infrared beam >Do not view directly with optical instruments n o par ts in the device may be ser viced by the user. 08
53 Notice all nV IDIa De sIGn s PeCI fIC aTI ons , Refe Ren Ce boa RDs, f Ile s , DR aWI nGs, DI aG nos TICs, lIs Ts , an D oTHeR D oCU men Ts (To GeTH eR an D sePaR aTel Y, “ ma TeRI als ”) aRe beI nG PR oVID-eD “ a s I s.” n V IDI a ma Ke s no W aRR an TIe s , eXPR e sse D, ImPlIe D, s Ta TUT oRY, o R oTHeRWI se WITH R e sPeCT T o TH e ma Te RI al s , anD eXPR e ssl Y DIsC l a Ims all I mPlIe D W aRR an TIe s of non InfRInGemen T, meRCHanTab Il IT Y, an D fITne ss fo R a PaRTICU l aR PURP ose. Information furnished is believed to be accur ate and reliable. However, n V IDIa Corpor ation assumes no responsibilit y for the consequences of use of such information or for any infringement of patents or other rights of third par ties that may result from its use. n o license is gr anted by implication or other-wise under any patent or patent rights of nV IDIa Corpor ation. s pecifications mentioned in this publi-cation are subject to change without notice. This publication supersedes and replaces all information previously supplied. n V IDIa Corpor ation products are not authorised for use as critical components in life suppor t devices or systems without express written approval of n V IDIa Corpor ation. WEEE Warning Message symbol for s epar ate Collection in e uropean Countries. This symbol indicates that this product is to be collected separ ately. The following apply only to users in e uropean countries: • This product is designated for separ ate collection at an appropriate collection point. Do not dispose of as household waste.• for more information, contact the retailer or the local authorities in charge of waste management. Trademarks n V IDI a, the n V IDIa logo, Ge force, and n force are tr ademarks or registered tr ademarks of n V IDIa Corpor ation. o ther company and product names may be tr ademarks of the respective companies with which they are associated. Copyright © 2008, 2009, 2010, 2011 n V IDIa Corpor ation. a ll rights reser ved.
iiiINHALT Inhalt Herzlich willkommen 1 Über dieses Handbuch 1 Systemanforderungen 2 Sicherheitsanforderungen 2 Epilepsie 3 Auspacken des Produkts 5 Kabellose Brille 5 USB-Infrarotsender 7 Integrierte Infrarotsender 9 Kabelgebundene Brille 11 Installation und Einrichtung 13 Herunterladen aktueller Software 13 Erforderliche Schritte vor Beginn der Installation 13 Installation 14 Anschließen des Bildschirms 14 Entfernen vorhandener Bildschirmtreiber 18 Installation der Treiber und der Software 19 NVIDIA-Systemsteuerung 21 Aufrufen der NVIDIA-Systemsteuerung 21 Einrichten von stereoskopischem 3D 22 Aktivieren von stereokopischem 3D 22 Einstellen der Tiefe 23 Stereoskopischer 3D-Anzeigetyp 24 Ändern des 3D-Laservisiers 24 Festlegen der Tastenkombinationen 25 Ausblenden der 3D-Stereo-Effekte beim Start des Spiels 28 Testen des stereoskopischen 3D-Bildes 29 INHALT