Nortel Modular Ics 5.0 System Coordinator Guide

							Making calls /71
P0941565 02 Modular ICS 5.0 System Coordinator Guide
Giving a telephone theability to make priority calls

 
  	    
 	  
 	     

 1 	   	 	 $3  
	
$ *
²¥¥ÛßßÜÝÝ
= *
ÛÜßÝß4 
 	
  1  6
	
	
5
3 *­	
   	
   

  	  	
9 *­
@ *Ô   

	 Priority
call:
0 *CHANGE
 Y4
5 N45
Displays

 	 	 	  	

 
 
  



	+
You tried to place a priority call toanother
Norstar telephone. The person you called
has blocked your call. Try to call later.
The party you are calling has eight seconds
to decide whether to accept or reject your
priority call.
The telephone you are calling has already
received a priority call or is unable to receive
priority calls.
The set you are trying to call has call on all
assigned lines.
Call blocked
Please wait
Priority denied
221 busy
PRIORITY LATER
Calling 221
PRIORITY LATER 
						

							72/ Making calls
Modular ICS 5.0 System Coordinator Guide P0941565 02
Using Ring Agai n
? / (	   	

    	
 	
  
       	 /
(	 	 

   	   !  

 
 	  / (	  

   	 

 
  		
	

Turning on Ring Again
$ *²Û  	 
? / (	 	
 	  / (	
	  

Canceling Ring Agai n
$ *²£Û 	
 	 / (	 
Displays
The set you are trying to call has the Do Not
Disturb feature activated.
The set you are trying to call is busy because
the person is on another line.
Tip -The Ring Again feature cannot be used when calling
a Hunt Group DN. For more information on Hunt Groups
see
Programming Hunt Groupson page 147
You cannot use Ring Again on your current
call. You can only use Ring Againwhile you
have a busy signal on an internal call or line
pool request, or while an internal call is
ringing.
PressYESto use Ring Again. PressNOif you
prefer to send a message.
Do not disturb
PRIORITY LATER
On another call
PRIORITY LATER
Cant ring again
Ring Again?
YES NO EXIT 
						

							P0941565 02 Modular ICS 5.0 System Coordinator Guide
Time savers for making calls
Storing a number on a memory button for Autodial

 	 	     
 	
   
	
  !	
 

. 
   
  	  7	
C: 	 

 	 	
	
 
-     	      	 

	 	
	
  	
    	
	  
   
Adding an autodial button
?  	  	 !	
 	
 	
 
$ *
²¥Ú 	 	 !	
 
*
²¥Û 	 	 	
 
= 6 	  	
     	   

	
 
& 	 (
	
  	+
, A	 /
	
, 1	
 /
	
, 
	 
 B Æ	  

,   	

 
						

							74/ Time savers for making calls
Modular ICS 5.0 System Coordinator Guide P0941565 02
Choosing a line for Autodial
 

 	 
 
  	 !	
   

               
 
	 
 
  	 	
 
 
   
 
 	
 
 
 - 	
  	 
 
 	 

-  
 	 
    	
	
   	

    
     	 
 
 	
   
 	
 	   	
	
 	
)  :2$;; 	
2$;;  	 !	
 	
 	
  	 
	
 
   	 
 	
  	 
 

Using intercom as the line for Autodial
-    
	


-  	 
  	
!	
 	
	
    

 	 	

 
 
	 
  	 
	 
 - 
 
 	 
 

	 
 	 	
   	
	
	
 
Displays
Tip -If you do not include a line selection in an autodial
number, the call uses your prime line (if you have one ).
Continue to enter digits until the number is
complete. Press
ÃorBKSPto
erase an incorrect digit. Press
³orOK
when you are finished.
The memory allotted to autodial numbers in
your Norstar system is full.
987___
QUIT BKSP OK
Autodial full 
						

							Time savers for making calls /75
P0941565 02 Modular ICS 5.0 System Coordinator Guide
While programming external Autodial, you
erased the button by pressing
³orOK
before entering any digits.
Enter the number you want to program.
Choose the line first, if necessary, then enter
the number exactly as if you were making a
call.
Enter the internal telephone number you
want to program.
You are programming an internal autodial
button and have entered a number that is not
an internal number on your system.
Enter a valid internal number.
If the number you are entering is a
destination code, use external autodial.
Press the memory button you want to
program.
Enter the number you want to program onto
the button, then press
³.
Enter the number you want to program onto
the button, then press
³orOK.Youmay
include a line or line pool selection in an
autodial sequence by selecting the line
before entering any digits.
The number is stored on the button.
For other displays, seeCommon feature displayson page 227.
Button erased
Enter digits
QUIT OK
Intercom#:___
QUIT
Invalid number
Press a button
QUIT
Program and HOLD
Program and OK
QUIT OK
Programmed 
						

							76/ Time savers for making calls
Modular ICS 5.0 System Coordinator Guide P0941565 02
Using Last Number Redial
*²Þ 
	
  
	 !	
   
	


A	  /
	
 
 	 	!  =9 

Preventing a telephone from using Last Number
Redial
A	  /
	
 	  
 	 

	
 


 
  	    
	  
 	     

 1- 
	      	

 	 == 
     	 
$ *
²¥¥ÛßßÜÝÝ
= *
ÛÜßÝß4 
	
 1 6
	
	
5
3 *­	
   	
   

  	  	
9 *­
@ *Ô   

	 
Restrictions
0 *­
2 *Ô  

	 Allow last no:
> *CHANGE
 Y4
5 N45
Tip -If you have a programmed Last Number Redial
button, you can use Button Inquiry (
²¥â), then
press the Last Number Redial button followed by
£)to
check the last number before you dial it. 
						

							Time savers for making calls /77
P0941565 02 Modular ICS 5.0 System Coordinator Guide
Displays
Using Speed Dial
	 
    
 
	
+  	

	

, 1 1
 %	
 		

   	

 
 
	
 
   !	
   
 	

  

, *	
  ? 1
 %	
 	 	




	
  	   
 
	
 
1
 
	
  	    	 
 	

	
 
	

  
 	

   
	 	 	  
 
	
  
	 
	
 
1
 
	
  	 

   	
 

The last number you dialed was a speed dial
number that displayed a name rather than
the number. The number is dialed correctly,
but you cannot see it.
You have not dialed an external telephone
number since the last power interruption or
system reset.
Tip -You can copy a number onto an autodial button
using Last Number Redial.
Hidden number
No last number 
						

							78/ Time savers for making calls
Modular ICS 5.0 System Coordinator Guide P0941565 02
Making a speed dial call
$ *²â 
 
	
 !	
 
 
	 	  	
  
 
	
 

=   		 
 
 
	
 

Changing and adding System Speed Dials
1 1
 %	
 
 	 
  ;$  2; 
 
	 	   1 1
 %	

    1- 	 	

 	 	 =#
Adding or changing User Speed Dial
 	

  	 	 ?1
 %	
   

+
$ *
²¥Ý
=  	 
 
  2$  #9 	  	 
		  	 
 
3  

 	 
 
     

      
 	 

  	
	  
 
   
  the button labelled as
intercom	
  	 
 
 	 

)  :2$;; 	
 2$;;   	 
 
 	 


 
9     	  	
@ *
³OK
Tip -There is no difference between using User Speed
Dial and using System Speed Dial. They differ only in how
you program them. 
						

							Time savers for making calls /79
P0941565 02 Modular ICS 5.0 System Coordinator Guide
Displays
Continue entering the number you want to
program. You can change the number by
pressing
BKSPorÃ.When you
are finished, press
³orOK.
Enter the telephone number you want to
program exactly as if you were dialing it
normally. When you are finished, press
³
orOK.
You have entered a code outside the code
range (01-70 for system, 71-94 for personal).
There is no number stored on the speed dial
code you have dialed.
If you want to program a line or line pool
selection for this speed dial number, select
the line or line pool. Otherwise, enter the
telephone number exactly as if you were
dialing it normally. When you are finished,
press
³.
If you want to program a line or line pool
selection for this speed dial number, select
the line or line pool. Otherwise, enter the
telephone number you want to program
exactly as if you were dialing it normally.
When you are finished, press
OK.
There is no line associated with the speed
dial number you are trying to use. Select a
free external line or line pool and enter the
speed dial feature code again.
The system cannot dial the number stored.
Reprogram the number.
For other displays, seeCommon feature displayson page 227.
01:9___
CANCL BKSP OK
Enter digits
QUIT OK
Invalid code
No number stored
Program and HOLD
Program and OK
QUIT OK
Select a line
Unknown number 
						

							80/ Time savers for making calls
Modular ICS 5.0 System Coordinator Guide P0941565 02
Using Saved Number Redial
²ßà

 	   	 
  	  	 !	
 	

 	
 
	

  	   	  	 	

  		 
	
	 
 	 	   	 	   1	

  /
 	 
    	 

1	
  /
	
 
 	 	!  =9 

Dialing a saved number
*
²ßà  	   		


-   	 	 	  
 1	
    /
 	
   
	  . -  4
²¥â5    
	 
  
	
 
Preventing a telephone from using Saved Number
Redial
1	
  /
	
 	 
 	 

	



 
  	    
	  
 	     

 1- 
	      	

 	 == 
     	 
$ *
²¥¥ÛßßÜÝÝ
= *ÛÜßÝß4 
	
 1 6
	
	
5
Tip -You can copy a number onto an autodial button
using Saved Number Redial.